共查询到20条相似文献，搜索用时 31 毫秒
1.
Arora H Du P Tan KW Hyun JK Grazul J Xin HL Muller DA Thompson MO Wiesner U 《Science (New York, N.Y.)》2010,330(6001):214-219
Epitaxy is a widely used method to grow high-quality crystals. One of the key challenges in the field of inorganic solids is the development of epitaxial single-crystal nanostructures. We describe their formation from block copolymer self-assembly-directed nanoporous templates on single-crystal Si backfilled with Si or NiSi through a laser-induced transient melt process. Depending on thickness, template removal leaves either an array of nanopillars or porous nanostructures behind. For stoichiometric NiSi deposition, the template pores provide confinement, enabling heteroepitaxial growth. Irradiation through a mask provides access to hierarchically structured materials. These results on etchable and non-etchable materials suggest a general strategy for growing epitaxial single-crystal nanostructured thin films for fundamental studies and a wide variety of applications, including energy conversion and storage. 相似文献
2.
Mackay ME Tuteja A Duxbury PM Hawker CJ Van Horn B Guan Z Chen G Krishnan RS 《Science (New York, N.Y.)》2006,311(5768):1740-1743
Traditionally the dispersion of particles in polymeric materials has proven difficult and frequently results in phase separation and agglomeration. We show that thermodynamically stable dispersion of nanoparticles into a polymeric liquid is enhanced for systems where the radius of gyration of the linear polymer is greater than the radius of the nanoparticle. Dispersed nanoparticles swell the linear polymer chains, resulting in a polymer radius of gyration that grows with the nanoparticle volume fraction. It is proposed that this entropically unfavorable process is offset by an enthalpy gain due to an increase in molecular contacts at dispersed nanoparticle surfaces as compared with the surfaces of phase-separated nanoparticles. Even when the dispersed state is thermodynamically stable, it may be inaccessible unless the correct processing strategy is adopted, which is particularly important for the case of fullerene dispersion into linear polymers. 相似文献
3.
The number and length of etchable tracks, created by alpha particles in a cellulose nitrate sheet, are significantly enhanced by the application of an electric field across the cellulose nitrate. 相似文献
4.
Optical surfaces coated with a thin layer to improve light transmission are ubiquitous in everyday optical applications as well as in industrial and scientific instruments. Discovered first in 1817 by Fraunhofer, the coating of lenses became standard practice in the 1930s. In spite of intensive research, broad-band antireflection coatings are still limited by the lack of materials with low refractive indices. A method based on the phase separation of a macromolecular liquid to generate nanoporous polymer films is demonstrated that creates surfaces with high optical transmission. 相似文献
5.
Bates FS 《Science (New York, N.Y.)》1991,251(4996):898-905
Different polymers can be combined into a single material in many ways, which can lead to a wide range of phase behaviors that directly influence the associated physical properties and ultimate applications. Four factors control polymer-polymer phase behavior: choice of monomers, molecular architecture, composition, and molecular size. Current theories and experiments that deal with the equilibrium thermodynamics and non-equilibrium dynamics of polymer mixtures are described in terms of these experimentally accessible parameters. Two representative molecular architectures, binary linear homopolymer mixtures and diblock copolymers, exhibiting macrophase separation and microphase segregation, respectively, are examined in some detail. Although these model systems are fairly well understood, a myriad of mixing scenarios, with both existing and unrealized materials applications, remain unexplored at a fundamental level. 相似文献
6.
Stratford K Adhikari R Pagonabarraga I Desplat JC Cates ME 《Science (New York, N.Y.)》2005,309(5744):2198-2201
Colloidal particles or nanoparticles, with equal affinity for two fluids, are known to adsorb irreversibly to the fluid-fluid interface. We present large-scale computer simulations of the demixing of a binary solvent containing such particles. The newly formed interface sequesters the colloidal particles; as the interface coarsens, the particles are forced into close contact by interfacial tension. Coarsening is markedly curtailed, and the jammed colloidal layer seemingly enters a glassy state, creating a multiply connected, solidlike film in three dimensions. The resulting gel contains percolating domains of both fluids, with possible uses as, for example, a microreaction medium. 相似文献
7.
Block copolymers consist of two or more chemically different polymers connected by covalent linkages. In solution, repulsion between the blocks leads to a variety of morphologies, which are thermodynamically driven. Polyferrocenyldimethylsilane block copolymers show an unusual propensity to forming cylindrical micelles in solution. We found that the micelle structure grows epitaxially through the addition of more polymer, producing micelles with a narrow size dispersity, in a process analogous to the growth of living polymer. By adding a different block copolymer, we could form co-micelles. We were also able to selectively functionalize different parts of the micelle. Potential applications for these materials include their use in lithographic etch resists, in redox-active templates, and as catalytically active metal nanoparticle precursors. 相似文献
8.
I Zeljkovic Z Xu J Wen G Gu RS Markiewicz JE Hoffman 《Science (New York, N.Y.)》2012,337(6092):320-323
High-temperature cuprate superconductors display unexpected nanoscale inhomogeneity in essential properties such as pseudogap energy, Fermi surface, and even superconducting critical temperature. Theoretical explanations for this inhomogeneity have ranged from chemical disorder to spontaneous electronic phase separation. We extend the energy range of scanning tunneling spectroscopy on Bi(2+y)Sr(2-y)CaCu(2)O(8+x), allowing a complete mapping of two types of interstitial oxygen dopants and vacancies at the apical oxygen site. We show that the nanoscale spatial variations in the pseudogap states are correlated with disorder in these dopant concentrations, particularly that of apical oxygen vacancies. 相似文献
9.
选用山西省农科院研制的渗水地膜为试材,普通聚乙烯塑料薄膜为对照,在玉米和花生上进行应用试验。通过对土壤水分、土壤温度、生育性状和产量性状等的测试表明,渗水地膜可将春季有限的部分自然降雨,通过膜上的微孔渗入到膜下保存起来加以有效利用,使土壤含水量比普通地膜提高1～6个百分点,具有比普通地膜更明显、更有效的增墒作用。在干旱地区应用渗水地膜覆盖作物栽培比普通地膜增产10％～20％。 相似文献
10.
Mixing and transport in turbulent flows-which have strong local concentration fluctuations-are essential in many natural and industrial systems including reactions in chemical mixers, combustion in engines and burners, droplet formation in warm clouds, and biological odor detection and chemotaxis. Local concentration fluctuations, in turn, are intimately tied to the problem of the separation of pairs of fluid elements. We have measured this separation rate in an intensely turbulent laboratory flow and have found, in quantitative agreement with the seminal predictions of Batchelor, that the initial separation of the pair plays an important role in the subsequent spreading of the fluid elements. These results have surprising consequences for the decay of concentration fluctuations and have applications to biological and chemical systems. 相似文献
11.
We demonstrate microscopic fluidic control and memory elements through the use of an aqueous viscoelastic polymer solution as a working fluid. By exploiting the fluid's non-Newtonian rheological properties, we were able to demonstrate both a flux stabilizer and a bistable flip-flop memory. These circuit elements are analogous to their solid-state electronic counterparts and could be used as components of control systems for integrated microfluidic devices. Such miniaturized fluidic circuits are insensitive to electromagnetic interference and may also find medical applications for implanted drug-delivery devices. 相似文献
12.
Hydrotalcites are used in technology as catalysts and anion exchangers and are important sinks for environmental contaminants. Their compositional variability makes it important, but difficult, to estimate their aqueous solubility. We report calorimetric measurements of the heats of formation of cobalt-aluminum hydrotalcite phases. The heat and free energy of formation from the elements are equal to those of mechanical mixtures of binary compounds, namely hydroxides and carbonates. The interlayer anion is much more important than the cation in determining the solubility of the hydrotalcite phase and its ability to contain or release heavy metals to the environment. Because hydrotalcites do not have an unreactive polymer as a structural core, their aqueous stability will change dramatically with composition, particularly with anion content. This simple mechanical mixture model allows prediction of aqueous solubilities and trace metal retention in a variety of geochemical settings. 相似文献
13.
A microfluidic device has been developed that can adsorb proteins from solution, hold them with negligible denaturation, and release them on command. The active element in the device is a 4-nanometer-thick polymer film that can be thermally switched between an antifouling hydrophilic state and a protein-adsorbing state that is more hydrophobic. This active polymer has been integrated into a microfluidic hot plate that can be programmed to adsorb and desorb protein monolayers in less than 1 second. The rapid response characteristics of the device can be manipulated for proteomic functions, including preconcentration and separation of soluble proteins on an integrated fluidics chip. 相似文献
14.
M Xanthos 《Science (New York, N.Y.)》2012,337(6095):700-702
Polypropylene (PP) is a widely used plastic with consumer applications ranging from food packaging to automotive parts, including car battery casings. To differentiate it from other recyclable plastics, it is designated as #5. Here, the factors contributing to PP recycling rates are briefly reviewed. Considerations include collection and separation efficiency, processing chemistry, and market dynamics for the products derived from recyclates. 相似文献
15.
We report a nanoscale "lost-wax" method for forming colloids with size distributions around 5% and their corresponding colloidal crystals. Macroporous polymer templates are first prepared from a silica colloidal crystal. We then use the uniform and interconnected voids of the porous polymer to generate a wide variety of highly monodisperse inorganic, polymeric, and metallic solid and core-shell colloids, as well as hollow colloids with controllable shell thickness, as colloidal crystals. We can also uniformly deform the polymer template to alter colloidal shape and demonstrate the formation of elliptical particles with precisely controlled aspect ratios. 相似文献
16.
Applying an electrical field to a polar polymer may induce a large change in the dipolar ordering, and if the associated entropy changes are large, they can be explored in cooling applications. With the use of the Maxwell relation between the pyroelectric coefficient and the electrocaloric effect (ECE), it was determined that a large ECE can be realized in the ferroelectric poly(vinylidene fluoride-trifluoroethylene) [P(VDF-TrFE)] copolymer at temperatures above the ferroelectric-paraelectric transition (above 70 degrees C), where an isothermal entropy change of more than 55 joules per kilogram per kelvin degree and adiabatic temperature change of more than 12 degrees C were observed. We further showed that a similar level of ECE near room temperature can be achieved by working with the relaxor ferroelectric polymer of P(VDF-TrFE-chlorofluoroethylene). 相似文献
17.
分子印迹技术用于天然产物有效成分研究的进展 总被引：1，自引：0，他引：1
印迹聚合物被用于天然产物中有效成分的分离提取,结合其他的分析技术使它的专一性、特效性得到充分的发挥。综述了目前印迹技术在色谱、固相萃取、膜分离等方面对天然产物有效成分进行的检测、分离等技术的研究进展。 相似文献
18.
We report an unexpected nonphotothermal material organization induced by continuous-wave visible laser light at low power levels. This effect is observed along the laser beam propagation direction in fully transparent entangled solutions of common homopolymers featuring sufficiently high molecular mass and optical anisotropy along the chain backbone. The resulting formation of long-lived stringlike or dotlike patterns on the micrometer scale, probed by dark-field coherent imaging, depends on the molecular mass, architecture, solvent nature, and polymer concentration. Electrostrictive and alignment forces as well as chain cooperativity are responsible for the osmotic compression of the polymer solute. Subsequent waveguiding effects induce autoamplification and "pattern writing" upon prolonged illumination. This wave-medium coupling could potentially lead to photorefractive, microoptics, and nanotechnology applications. 相似文献
19.
Blanchet GB Fincher CR Jackson CL Shah SI Gardner KH 《Science (New York, N.Y.)》1993,262(5134):719-721
The formation of high-quality thin films of polytetrafluoroethylene (PTFE) is important in many applications ranging from material reinforcement to molecular electronics. Laser ablation, a technique widely used to deposit a variety of inorganic materials, can also be used as a simple and highly versatile method for forming thin polymer films. The data presented show that PTFE films can be produced on various supports by the evaporation of a solid PTFE target with a pulsed ultraviolet laser. The composition of the ablation plume suggests that PTFE ablation and subsequent film formation occur by way of a laser-induced pyrolitic decomposition with subsequent repolymerization. The polymer films produced by this method are composed of amorphous and highly crystalline regions, the latter being predominantly in a chain-folded configuration with the molecular axis aligned parallel to the substrate surface. 相似文献
20.
Mezzenga R Ruokolainen J Fredrickson GH Kramer EJ Moses D Heeger AJ Ikkala O 《Science (New York, N.Y.)》2003,299(5614):1872-1874
A route for producing semiconducting polymer blends is demonstrated in which a doped pi-conjugated polymer is forced into a three-dimensionally continuous minor phase by the self-assembly of colloidal particles and block copolymers. The resulting cellular morphology can be viewed as a high-internal phase polymeric emulsion. Compared with traditional blending procedures, this process reduces the percolation threshold for electrical conductivity by a factor of 10, increases the conductivity by several orders of magnitude, and simultaneously improves thermal stability. Following this route, new applications can be envisaged for semiconducting polymer blends that require only minimal concentrations of doped pi-conjugated polymer. 相似文献