首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 519 毫秒
1.
The effect of acetic acid and hydrochloric acid (HCl) deamidation pretreatment on the susceptibility of wheat gluten to enzymatic hydrolysis by Pancreatin and sensory characteristics of the resultant hydrolysates was investigated. At two degrees of deamidation (24% and 60%, with or without moisture-heating, respectively), wheat gluten pretreated by acetic acid deamidation was more susceptible to be hydrolyzed as evaluated by the hydrolysis degree, nitrogen solubility index, titratable acid amount and free carbohydrate content of the hydrolysates. Wheat gluten pretreated by acetic acid deamidation at a degree of 24% exhibited the highest susceptibility to enzymatic hydrolysis. Moisture-heating (121 °C, 10 min) in the deamidation pretreatment decreased the susceptibility of wheat gluten to enzymatic hydrolysis and the peptide factions of ≤3000 Da in the hydrolysates due to the formation of larger molecule weight aggregates. The hydrolysates prepared from acetic acid deamidated wheat gluten showed more intense glutamate-like and sauce-scented taste and better nutritional characteristics.  相似文献   

2.
Four fractions (100-, 50-, 20-K and permeate) from a proteolytic hydrolysate (DH=2.8%) of wheat gluten were separated using size fractionation on ultrafiltration membranes with molecular weight cut-offs of 100, 50 and 20 kDa and their functional properties evaluated. Proteolysis led to a significant (P<0.05) increase in solubility of gluten fractions at pHs between 2–10 and a shift of the pI value from 6–7 to 5. The solubilities of 100-K, 50-K, 20-K and permeate fractions were significantly (P<0.05) improved compared with the untreated control and the hydrolysate. The 50-K fraction was superior to other three fractions for emulsion activity index between pH 2 and 10. The most stable foam was given by the 100-K fraction which showed 65.8% of initial foam while the control sample gave only 23% of foam, after 60 min resting. Foam stability decreased as the molecular mass of hydrolysate fractions decreased. Furthermore, after proteolysis, the surface hydrophobicity (H0) of gluten increased significantly (P<0.05) compared with the control except for the permeate fraction. The highest value of H0 was given by the 100-K fraction, followed by the 50-K, 20-K and permeate fractions. In addition, proteolysis resulted in a decrease in the storage modulus of gels.  相似文献   

3.
In this study, α-polylysine was used to enhance the cross-linking effect of TGase on gluten and its effects on properties of gluten films were investigated. The amount of free ammonia released from the cross-linking reaction of gluten induced by TGase at the presence of α-polylysine obviously increased, and more polymers with higher molecular weight were formed from the SDS-PAGE results, which indicated that the TGase-mediated cross-linking reaction ability of gluten was strengthened with the incorporation of α-polylysine. The tensile strength of the films from gluten modified with TGase (20 units/g wheat gluten) and 2% α-polylysine (g/g gluten) for 3 h increased from 4.02 ± 0.09 MPa to 5.28 ± 0.14 MPa, which was more effective than that treated with TGase alone (in which the tensile strength of the films was 4.49 ± 0.10 MPa). The TGase treatment with α-polylysine of gluten improved the water stability of the films much more than that treated with TGase alone. A rougher surface and a more compact cross-section structure were observed by SEM for the films from TGase-α-polylysine treated gluten. The contact angles between the gluten films surface and a water droplet increased because of TGase-mediated cross-linking modification.  相似文献   

4.
The foaming properties of gluten and acetylated gluten were studied at various concentration values (1%, 5%, 10% and 20%). Acetylated gluten was prepared by acetylation of gluten with acetic anhydride in presence of sodium hydroxide as catalyst. The foaming properties were characterised by measuring foam stability and drainage. It was found that foam made from acetylated gluten is more abundant and stable than the foam made from gluten studied in the whole range of concentration, i.e. 1–20%.  相似文献   

5.
Konjac glucomannan (KGM), a dietary fiber, can be used to improve the quality of flour products. In this study, the effects of KGM at different concentrations on the water distribution, morphological, textural, thermal, and structural properties of wheat gluten were studied. KGM improved the physicochemical and structural properties of wheat gluten by changing the water holding capacity, secondary structure, and free sulfhydryl and disulfide bond contents. Scanning electron microscopy confirmed that KGM can evenly fill the network structure, affecting gluten network development. KGM exhibited no effect on moisture content; however, KGM decreased water mobility in wheat gluten. The increased thermal denaturation temperature indicates that KGM can improve the thermal stability of wheat gluten. Sharp changes in texture profile analysis (TPA) parameters were observed around 5% KGM, and elasticity and cohesiveness were optimal after the addition of 4% KGM. In addition, the secondary structure analysis indicated that α-helix and β-sheet structures increased. The addition of 5% KGM increased the content of disulfide bonds by 2.57-fold. Overall, the changes in gluten structure and properties suggest that wheat gluten could be improved the stability, functionality and water holding capacity of gluten by adding KGM.  相似文献   

6.
Interest in tef [Eragrostis tef (Zucc.)Trotter] grain in food applications has increased in recent years because of its nutritional merits and the absence of gluten. With the objective of evaluating the suitability of tef for making gel type food products, gel viscoelastic properties of three varieties of tef (one brown and two white) at different concentrations (6, 8, 10, 12 & 14% w/w) were evaluated at 25 °C and 90 °C. The texture and color evolution for 16% (w/w) gels were evaluated. Proximate compositions of the flours were quantified. Rice, refined and whole wheat flours were analyzed as reference. The minimum flour concentration required for gel formation from the three tef varieties was 6–8%, similar to wheat flour. All tef flour suspensions pre-heated to 95 °C led to gels with a solid-like behavior (G′ > G″), both at 25 °C and 90 °C, with higher consistency than wheat gels at the same concentration. The dependence of viscoelastic moduli with concentration fulfilled the power law. The Avrami model was successfully fitted to the textural evolution of tef gels. Important differences were observed among tef and rice and wheat flours, probably contributed by their differences in protein, starch, lipid and fiber constituents. Gelling properties characterized suggest that tef flours would be suitable ingredients in gel food formulations.  相似文献   

7.
Microwave-assisted extraction (MAE) was applied for extracting rice bran protein with a response surface methodology (RSM). The optimal condition was 1000 W of microwave power, 90 s of extraction time, and a solid to liquid ratio of 0.89 g rice bran/10 mL of distilled water. The protein yield of MAE was higher than that of alkaline extraction (ALK) by about 1.54-fold (P < 0.05), while the protein digestibility was similar. The protein hydrolysates (PHs) with at different degrees of hydrolysis (DH) (5.04, 10.37 and 15.04%) were produced by alcalase. The molecular weight (MW) of the rice bran protein concentrates (RBPC) and the PHs ranged between <11 kDa and 100 kDa. The excessive enzymatic hydrolysis resulted in a negative effect on water and oil absorption capacities. The PHs with DH15.04% acted as the strongest DPPH radical scavenger, ferric reducing agent, and also metal ion chelator (P < 0.05). However, a DH of 5.04% was sufficient for improving the functional properties of RBPC, especially foam ability and the emulsion activity index. This study suggests that the desirable properties of rice bran protein can be controlled with enzymatic modification.  相似文献   

8.
Effect of thermal treatment at 50–90 °C on wheat gluten hydrolysis by papain was evaluated in this study. Thermal treatment decreased the amount of sodium dodecyl sulfate (SDS) extractable protein. The treatments at 80 and 90 °C had a strong impact on protein extractability. Thermal treatment for 30 min resulted in a significant reduction in SDS extractable glutenin level in wheat gluten. A significant drop in free sulphydryl level was found in wheat gluten treated at 70 °C for 30 min. It indicated that cross-linking of glutenin through S–S occurred during thermal treatment. The treatments at 70–90 °C led to significant decreases in soluble and nitrogen level, while significant increases in peptide nitrogen amount in the hydrolysates from treated gluten were found. A time-dependent effect was observed for the changes in soluble forms of nitrogen and PN. Thermal treatment resulted in molecular mass distribution change according to gel permeation chromatography analysis. Thermal treatment significantly increased the amount of fractions with molecular mass beyond 10 K (67.2%) in the hydrolysates and greatly decreased the amounts of fractions with MM of 10–5 K and below 5 K in hydrolysates.  相似文献   

9.
This study compared the concentration of angiotensin-converting enzyme (ACE) inhibitory peptides at different stages of the bread-making process, including kneading, proofing, and final products. Steamed bread, baked bread, and soda crackers were produced with 3–20% addition of rye malt sourdoughs to assess products differing in their thermal treatment. Eight tripeptides with known or predicted ACE-inhibitory activity were quantified by LC/MS in multiple reaction monitoring (MRM) mode. In wheat sourdough and rye-malt gluten sourdough, IPP was the predominant tripeptide at 58 and 473 μmol kg−1, respectively, followed by LQP, IQP, and LPP. During the bread-making process, peptide concentrations were modified by enzymatic conversions at the dough stage and by thermal reactions during baking. The concentrations of IPP, LPP and VPP remained stable during dough preparation but decreased during thermal treatment; the concentrations of other peptides were changed at the dough stage but remained relatively stable during baking. The cumulative concentration of 8 ACE-inhibitory peptides in steamed bread and bread crumb exceeded 60 μmol kg−1, while soda crackers contained less than 3 μmol kg−1. The peptide levels in bread thus likely meet in vivo active concentrations.  相似文献   

10.
Thermoplastic films from wheat proteins   总被引：1，自引：0，他引：1  
We show that the wheat proteins gluten, gliadin and glutenin can be compression molded into thermoplastic films with good tensile strength and water stability. Wheat gluten is inexpensive, abundantly available, derived from renewable resource and therefore widely studied for potential thermoplastic applications. However, previous reports on developing thermoplastics from wheat proteins have used high amounts of glycerol (30-40%) and low molding temperature (90-120 °C) resulting in thermoplastics with poor tensile properties and water stability making them unsuitable for most thermoplastic applications. In this research, we have developed thermoplastic films from wheat gluten, gliadin and glutenin using low glycerol concentration (15%) but high molding temperatures (100-150 °C). Our research shows that wheat protein films with good tensile strength (up to 6.7 MPa) and films that were stable in water can be obtained by choosing appropriate compression molding conditions. Among the wheat proteins, wheat gluten has high strength and elongation whereas glutenin with and without starch had high strength and modulus but relatively low elongation. Gliadin imparts good extensibility but decreased the water stability of gluten films. Gliadin films had strength of 2.2 MPa and good elongation of 46% but the films were unstable in water. Although the tensile properties of wheat protein films are inferior compared to synthetic thermoplastic films, the type of wheat proteins and compression molding conditions can be chosen to obtain wheat protein films with properties suitable for various applications.  相似文献   

11.
Despite the great variety of physicochemical and rheological tests available for measuring wheat flour, dough and gluten quality, the US wheat marketing system still relies primarily on wheat kernel hardness and growing season to categorize cultivars. To better understand and differentiate wheat cultivars of the same class, the tensile strength, and stress relaxation behavior of gluten from 15 wheat cultivars was measured and compared to other available physicochemical parameters, including but not limited to protein content, glutenin macropolymer content (GMP) and bread loaf volume. In addition, a novel gluten compression–relaxation (Gluten CORE) instrument was used to measure the degree of elastic recovery of gluten for 15 common US wheat cultivars. Gluten strength ranged from 0.04 to 0.43 N at 500% extension, while the degree of recovery ranged from 5 to 78%. Measuring gluten strength clearly differentiated cultivars within a wheat class; nonetheless it was not a good predictor of baking quality on its own in terms of bread volume. Gluten strength was highly correlated with mixograph mixing times (r = 0.879) and degree of recovery (r = 0.855), suggesting that dough development time was influenced by gluten strength and that the CORE instrument was a suitable alternative to tensile testing, since it is less time intensive and less laborious to use.  相似文献   

12.
Reduced glutathione (GSH) commonly exists in wheat flour and has remarkable influence on gluten properties. In this study, effect of GSH on the gelatinization and retrogradation of wheat flour and wheat starch were investigated to better understand the GSH-gluten-starch interactions in wheat flour. Compared with wheat starch, wheat flour showed significant decreases in peak and final viscosity, and gelatinization onset temperature with increasing GSH concentration. GSH depolymerized gluten and thereby broke down the protein barrier around starch granules to make the starch easily gelatinized. However, the interaction between GSH and wheat starch restrained starch swelling. GSH addition resulted in weakened structure with higher water mobility in freshly gelatinized wheat flour dispersions but decreased water mobility in wheat starch dispersions. After storage at 4 °C for 7 d, GSH increased elasticity and retrogradation degree in wheat flour dispersions but retarded retrogradation in wheat starch dispersions. The results indicated that GSH promoted retrogradation of wheat flour, which mainly attributed to the depolymerized gluten embedding in the leached starch chains, and inhibiting the re-association of amylose, and subsequently promoted the starch intermolecular associations and starch retrogradation. This study could provide valuable information for the control of the quality of wheat flour-based products.  相似文献   

13.
Wheat gluten was isolated in a laboratory dough-batter flour separation process in the presence or absence of lipases differing in hydrolysis specificity. The obtained gluten was blended with wheat starch to obtain gluten-starch (GS) blends of which the water and oil binding capacities were investigated. Furthermore, GS blends were mixed into dough and processed into model breads, of which dough extensibility and loaf volume were measured, respectively. In comparison to GS blends prepared with control gluten, oil binding capacity was higher when GS blends contained gluten isolated with Lecitase Ultra (at 5.0 mg enzyme protein/kg flour), a lipase hydrolyzing both non-polar and polar lipids. Additionally, dough extensibility and total work needed for fracture were lower for dough prepared from GS blends containing gluten isolated with Lipolase (at 5.0 mg enzyme protein/kg flour), a lipase selectively degrading non-polar lipids. In GS blend bread making, this resulted in inferior loaf volumes. Comparable GS blend properties were measured when using control gluten and gluten isolated with YieldMAX, a lipase mainly degrading N-acyl phosphatidylethanolamine. In conclusion, properties of GS blend model systems are altered when gluten prepared in the presence of lipases is used to a degree which depends on lipase specificity and concentration.  相似文献   

14.
In soft wheat breeding programs, the gluten strength of flours from specific genotypes is determined by various chemical and rheological tests. Based on such tests, the experimental wheat lines with very weak flour gluten are typically selected for the production of soft-dough biscuits, while the lines with medium gluten strength and extensibility are reserved for hard-dough biscuits. Often, the genotypes having high gluten strength are removed from such breeding programs. In the present study, the usability of the GlutoPeak tester on whole wheat flour samples was investigated for assessing the gluten strength of soft wheat breeding materials. In the study, 25 soft wheat genotypes, grown in seven locations for three years, were categorized by commonly used gluten-quality-related parameters. Based on the results of the study GlutoPeak whole wheat flour PMT values ranging from 30.0 to 50.0 s and AM values from 15.0 to 20.0 GPU were found to be suitable for soft-dough biscuit products, whereas the values between 40.0 and 60.0 s and 20.0 and 23.0 GPU were appropriate for hard-dough biscuit products. The genotypes exhibiting AM values > 24.0 GPU and PMT values > 60.0 s were judged to have too-strong gluten, and thus eliminated from the breeding program. The gluten aggregation energy (AGGEN), and the torque after the maximum torque (PM) values were only useful and applicable to flours for soft-dough products. The maximum torque (BEM) values were not effective in discriminating against the genotypes. The results of this study demonstrated that the GlutoPeak whole wheat PMT and AM parameters can be recommended as quick and accurate parameters especially for early generation screening with small-scale tests in soft wheat improvement programs.  相似文献   

15.
The potential of peptidase-containing bran extracts from germinated cereals (wheat, emmer, barley) and a peptidase preparation from Aspergillus niger (AN-PEP) to degrade gluten in wheat starch below the threshold for gluten-free foods of 20 mg/kg was compared. The gluten-specific peptidase activity of the peptidases was determined by using gliadin as a protein-based substrate as well as the two celiac-active peptides PQPQLPYPQPQLPY (α-gliadin) and SQQQFPQPQQPFPQQP (γ-hordein). The peptidase activity of AN-PEP exceeded the activities of bran from germinated cereals by a factor up to 690,000. Three wheat starches with initial gluten contents of 110, 1679, and 2070 mg/kg, respectively, were incubated with bran extracts and AN-PEP, lyophilized, and residual gluten was quantitated by a competitive ELISA. Unlike peptidases from bran extracts, AN-PEP was capable of degrading gluten below 20 mg/kg in all starches. The absence of gluten in AN-PEP-treated starches was confirmed by liquid-chromatography-mass spectrometry. The properties of gluten-free starches were comparable to the native starches with the exception of a reduced viscosity after AN-PEP treatment. This problem could be overcome by using higher enzyme concentrations and shorter incubation times or by optimizing AN-PEP production for lower residual α-amylase activity.  相似文献   

16.
Gluten extracted from fresh pasta by-products (PG) was enzymatically hydrolyzed by two different commercial proteases (Alcalase 2.4 L and Pancreatin) to different degrees of hydrolysis (DH 2.0, 4.0 and 8.0%). Commercial gluten (CG) was used as reference. The evaluation of functional properties of hydrolyzates from pasta gluten (PGH) and commercial gluten (CGH) showed that Pancreatin hydrolyzates had the highest emulsifying capacities. Regarding the foaming activity, all hydrolyzates performed better than unhydrolyzed gluten. PGH and CGH were added to wheat flour (1%) and their effects on dough rheology were studied. Most hydrolyzates with DH 8% increased dough thermal stability and elasticity during mixing, accelerated the denaturation rate of the protein network, and delayed the gelatinization speed of starch as the temperature increased. Texture profiles and specific volumes of breads from low quality wheat flour with added Pancreatin hydrolyzates (DH 8%) were comparable to those of breads from high quality flour. This showed the potential suitability of PGH and CGH as bread improvers.  相似文献   

17.
The effects of different mixing parameters (vacuum mixing and mixing time) on oat (70% oat flour) and wheat noodle dough were investigated on the basis of textural properties and gluten formation. The results showed that at a vacuum degree of −0.06 MPa and mixing time of 10 min, oat and wheat dough sheets exhibited the highest resistance to extension and glutenin macropolymer (GMP) content, and had the most compact and uniform gluten network. Compared with wheat noodle dough, oat dough had lower resistance to extension, lower tightly bound water content, and higher GMP content. Microstructural examination showed that oat noodle dough had a more aggregated distribution of gluten protein compared with wheat noodle dough under the optimum mixing parameters. Furthermore, the poor binding ability of vital wheat gluten with water molecules caused the indexes of oat noodle dough to be more strongly affected by the changes in mixing parameters than wheat noodle dough.  相似文献   

18.
Water sorption of gluten and wheat starch films as a function of water activity was studied using gravimetric step-change sorption experiments. Films of different thicknesses were used with the aim to vary the characteristic diffusion time and to get insights in the contribution of the polymer-chain rearrangement in the sorption behaviour. It is shown that both starch and gluten are in the glassy state for a water activity aw below 0.9. From comparison of the dynamical sorption curves with a Fickian diffusion model, it is shown that water diffusion in gluten films seems Fickian for aw < 0.7, and non-Fickian for aw > 0.7, while for starch films, non-Fickian sorption behaviour is observed for aw > 0.1. The results show that polymer-chain rearrangement and the stress built up in the matrix play an important role in the sorption dynamics of these films. Even when the material is in the glassy state matrix relaxation phenomena play a role in the sorption behaviour of starch and gluten.  相似文献   

19.
Several Indian snack foods consist of an outer coating made with a wheat flour batter and a sweet or savoury filling. In order to study the possibilities of improving the rheological characteristics of batters used in the batter-coated products, wheat flour was steamed for varying periods of time (5, 15 and 30 min). The studies indicated that SDS-sedimentation values decreased from 35 to 24·5 mL, gluten forming protein was completely denatured, gel mobility increased and solubility of gliadin in the β-region decreased with an increase in the steaming period.The steamed wheat flour was used to make batters having 30, 33 and 36% solids suspended in water. The apparent viscosities of the batter increased from 9·6 to 19·2 Pa·s; the yield stress increased from 5·3 to 7·15 Pa; the consistency index increased from 27·86 to 78·31 Pa·sn. The maximum values of all three parameters were observed in the batter which had a solids concentration of 36%, and which had been made with a flour steamed for 30 min. On the other hand, the flow behaviour index decreased slightly with duration of steaming and with increasing solid concentrations in the batter.  相似文献   

20.
The effects of different percentages of barley flour (i.e. 0–25%) in wheat flours on the physico-chemical properties and structure of dough and bread were investigated. As the percentage of barley flour in mixed flour was increased, its protein and gluten contents decreased whereas the ash content and enzyme activity increased. The rheological characteristics of the four dough mixes were studied using Farinograph, Extensograph and Alveograph. The water absorption (p < 0.01) and stability (p < 0.05) decreased significantly as the percentage of barley flour increased, while no changes were observed in the extensibility and maximum heights. Significant differences were observed in the structural and physical properties as well as in the image analysis of breads. With the increase in the percentage of barley flour, the crumb apparent density decreased (p < 0.1) whereas the porosity (i.e., fraction to total volume) increased (p < 0.1). Overall, the shape and pore structure at 10% barley flour (W90B10) were similar to the pure wheat flour bread, while addition at 15 and 25% of barley flour (W85B15 and W75B25) showed more non-uniform and larger pores.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号