共查询到20条相似文献，搜索用时 22 毫秒
1.
在日益激烈的企业生存竞争中,针对乳制品生产企业如何选取合适的生产批量和库存水平的问题,提出了成本-时间-客户满意度的三目标优化模型。首先,考虑乳制品的库存费用、周转时间和客户满意度,分别建立库存生产成本、库存周转时间和客户满意度优化模型;其次,以生产批量和库存水平为决策变量,应用多目标遗传算法,集成库存生产成本模型、库存周转时间模型和客户满意度模型,求出所有非劣解;最后,应用伪权向量法,通过保质期不同的产品验证提出的模型。结果表明,对于不同保质期的产品,均可得出最优库存生产批量大小和最优库存水平。 相似文献
2.
By analyzing the inherent uncertainties, discrete uncertainties and external environmental uncertainties, a dual-feedback control strategy and the dynamic scheduling method are proposed to solve the dynamic scheduling problem of vehicle air-conditioning assembly shop under uncertainty. Considering the reentrant constraint, equipment capacity constraint, and time discrete constraint etc., the multi-objective scheduling model of vehicle air-conditioning assembly shop is set up,taken the earliness/tardiness, process time, production cost and quality loss as optimization objectives. According to the characteristic of the model, sectional chromosome encoding, crossover operator and mutation operator are designed to prevent the generation of illegal solutions and improve efficiency of the algorithm. An example is given to prove the feasibility and validity of the approach. 相似文献
3.
CHEN Xing-ming LIU Fei WANG Ping NIE Neng HU Xiang-dong CHEN Yong FENG Hui-zong 《保鲜与加工》2000,(2):120-122
The Postal Transportation Problem(PTP)is a very complex transportation problem. It has not any very effective solving method at present. This paper systemically analyze and define the problem according to its range, capability and time limit restrictions, random factors, dynamic factors, preferential factors, optimization objectives, cost composing, and so on. The multiobjective optimization mathematical modelof PTP is established and its relational problems are also analyzed. And the model is made up of 12 kinds of restraint conditions and three optimization objectives which are the whole transportation cost, average transportation time of mail and average use ratio of cars. This will be in favor of further study of PTP. The successful development of a logistics scheduling and dispatching optimization software based on the model and its corresponding algorithm proves the correctness of the model.[WT5HZ] 相似文献
4.
According to the characteristics of the outsourcing production such as multi task, dynamic environment, and multi objectives etc, an optimal allocation model of outsourcing in multi task is established by the linear weighted method. Outsourcing production time, outsourcing production cost and outsourcing production quality are set as its target functions. Then, genetic algorithm for solving this model is also investigated. Finally, a case study is employed for the effectiveness and the validity. 相似文献
5.
An integrated batch planning mathematical model based on multi-object optimization is proposed to solve the orderly and efficient flow of material between different working stations in iron and steel enterprises, where production technology constraints, material variations and coupling between steelmaking-continuous casting and hot rolling are analyzed first. According to the requirements of the hot rolling steel strip contracts, the integrated batch planning is divided into sub-plans of rolling plan, casting plan and furnace plan which are independent and coupling to each other, forming rolling plan and furnace plan simultaneously to influence casting plan. Heuristic method based on modified co-evolutionary algorithm is advanced to resolve this problem. The results of simulation and analysis in an iron and steel plant for strip steel production shows that it is feasible to provide effective guidance for integrated batch plan making. 相似文献
6.
For certain types of inventory, the ordering cycle and demand may be random variants, which satisfy certain types distribution. The classical EOQ model usually neglects the fact. Based on the constant demand, under the hypothesis that the ordering cycle is a random variant which satisfies exponent distribution, average demand is a linear increasing function, this paper considers the effects of the time-value of capital and inflation on replenishment strategy of inventory system. Loosening the condition of basic economic order quantity model under deterministic state, the total cost function of the model is provided. The optimum order quantity and cycle are obtained. The application range of EOQ model under the constant demand is widened. The theoretical evidence is provided for the inventory system to make management decision. 相似文献
7.
An algorithm of incremental model predictive control is proposed to solve a class of industrial production process real-time tracking problems. The basic idea is to establish a predictive model by adopting speed response on the basis of tracking error, and realize the optimization of the second time performance by using the soft constraint of the increment of control quantity and the online rolling optimization method. The theoretical analysis and Matlab simulation results show that the control algorithm can obtain good tracking performance, smooth dynamic response of the controlled object and strong robustness of the closed-loop system. 相似文献
8.
Effective information strategy and information systems are important for the development of automobile manufacturing enterprises. In complicated and dynamic business environment, information systems planning (ISP) faces the problem of lacking integrated optimization of enterprise strategy, business strategy, and IT strategy. A hierarchical information system planning model is developed for automobile manufacturing enterprises. A planning approach is proposed to make the information system continuously mating the enterprises' strategy. The proposed studies were applied to agile ISP of an automobile manufacturing enterprise with satisfied result. 相似文献
9.
改进遗传算法在饲料配方设计中的应用 总被引：1，自引：1，他引：0
针对现有饲料配方软件的局限性,以白绒山羊饲料配方为例,提出一种基于改进遗传算法的求解方法。与标准遗传算法相比,采用随机联赛选择替代轮盘赌模型,优化了选择策略;采用不同的随机数交叉和高斯变异,改进了交叉算子与变异算子。测试结果表明,该方法具有良好的运算效率,拓宽了搜索空间,提高了对重点区域的搜索能力,降低了成本,为复杂问题的优化提供了一种新的思路。 相似文献
10.
It is important for enterprises' inventory management to find out the optimal production cycle and the length of shortage time,so that the total cost of inventory system can be reduced and the service level can be raised.Based on the classical EPQ model,this paper develops an EPQ model for deterioration items with different lost sale factor relative to the inventory level during shortage period.The existence of unique optimal solution is discussed by mathematic analysis and a numeric example.The sensitivity analysis shows that the parameter of losing sale has different impact on the costs of inventory system.The factors must be considered for the production inventory system to make management decision. 相似文献
11.
An improved predictive control method is presented to compensate the random time delay in the networked control system. The feedback time delay is compensated by predictive controller based on softened increment input strategy. The forward time delay is unknown for controller, so an extra feedback loop is added to compensate the delay by estimating the error between the actual control signal effected on plant and the output of controller in historical moment. For the controlled system with unknown or slowly varying parameters, the networked feedback correction algorithm is discussed based on a modified recursive least-squares identi cation algorithm. The system stability is analyzed and the simulation results show that the time delay in the networked control system can be accurately compensated. The excellent network performance is ensured with this strategy. 相似文献
12.
Thongphon Promsaka Na Sakolnakorn Suranart Khamanarong Kimaporn Khamanarong Virasit Imtawil John Overton 《Asia Pacific viewpoint》2010,51(1):105-111
Industry outsourcing has become a significant feature of industrialisation in Southeast Asia. This study presents the findings of a study of smaller industrial enterprises in Northeast Thailand that outsource some of their operations to workers in rural villages. It was found that social relationships rather than formal contracts are critical in the management and spread of such outsourcing and that industries use outsourcing primarily as a flexible strategy to lower costs of production. 相似文献
13.
14.
Aiming at multi type and batch production system with flexible process, an optimization method for input plan based on Witness simulation is proposed. The scientific problem researched is described. Aiming at the characteristics of multi type and batch production with flexible process, the simulation logic is designed. Taking Witness as simulation platform, the simulation model combining input plan with scheduling for multi type and batch production is constructed. The effectiveness of the method is tested by simulation examination. 相似文献
15.
实现持续低碳化发展是冷链物流技术创新与优化的重要方向。基于成本约束视角,将冷链物流存储、配运、交付诸环节的运营成本和碳排放成本纳入企业总成本目标函数,构建冷链物流配送路径优化模型,使用蚁群算法与遗传算法变异算子结合求解,提高了算法迭代收敛速度。以医药冷链物流配送为例进行算法仿真优化与分析,验证了降低物流成本与节能减排可协同优化,获得良好的经济效益。模型和算法对环境可持续视角下的冷链物流配送路径问题有理论和实践意义。 相似文献
16.
LUO Jun LU Jia jiang CHEN Wei min FU Li LIU Xue ming ZHANG Ping CHEN Jian duan 《保鲜与加工》2009,(12):1482-1485
For cylindricity error evaluation, the Least Squares Method (LSM) is not good enough because of the big error, while the bionics algorithms such as Genetic and Ant Colony Algorithm need to set many parameters and converge slowly, an Artificial Bee Colony Optimization Algorithm is proposed to evaluate the minimum zone cylinder (MIC). This Algorithm refers the tabu strategy for tabu search algorithm to use the Tabu table to save the local optimization results. It enhances the control effect of parameter limit and improves the global convergence ability. Experiment results indicate that this method can converge to the global optimization very quickly. The average runtime is nearly 1.2 s. It is applicable to the real time processing system such as Three Coordinate Measuring Machine. 相似文献
17.
为了确定经济合理的露天矿备采煤量留设位置和保有期,运用露天开采基本原理与统计分析方法,分析新时期露天煤矿的发展变化特点及其对备采煤量留设位置和保有期的影响;以经济效益最优为判断准则,研究复合煤层露天矿备采煤量留设位置与内排运距的关系,建立备采煤量留设位置优化模型;研究季节性剥离露天矿备采煤量保有期与剥离成本、运输成本以及资金时间价值的关系,建立备采煤量保有期优化模型。以内蒙古东部地区某露天矿为研究实例,确定了该矿经济合理的备采煤量保有期为6.5个月,备采煤量应全部留在1号煤层。研究结果表明：该优化模型可用于指导露天矿生产,有效降低剥离成本,提高经济效益。 相似文献
18.
Converter vanadium recover is a very sophisticate reaction which is diverse and non- line. From the point of view of statistics and reaction mechanism, it is difficult to build up end- point control static model. Aim at this problem, the paper puts forward a model identify method based on incremental genetic RBF neural network to build up such a model, which can perfectly resolve the problem of random selection of RBF cluster center number and sample data clustering. Furthermore, in order to ensure structure of neural network to fit with continuous incremental data set, the paper presents a method of incremental data dealing, which is applied to amend the parameters of neural network. Then the request of continuous production is satisfied. Finally the result of test shows that after adopting the algorithm, the error of result is less than before and end- point hitting ratio satisfies to ninety percent. These indicate the algorithm has the engineering practicability. 相似文献
19.
针对模糊控制系统中切换时延较长和切换次数较多的问题,研究了一种基于模糊控制系统的垂直切换判决算法。在基于信号强度判决时将RSS作为门限值,提高系统判决能力;同时,将网络参数和服务类型作为判决因素,结合层次分析法引入并行的模糊控制系统,缩短了切换判决的时间、选择适合用户的最佳网络,做出垂直切换。仿真结果表明,该算法减少了切换次数,降低了切换时延,增强了系统的性能。与传统的切换算法相比较,该算法对切换的判决因素考虑的更全面,兼顾了用户终端的使用环境及成本问题,有效地保证了网络的服务质量。 相似文献
20.
This paper presents an exponential time-varying demand production-inventory mode for deteriorating items with variable lost sale factor and backlogging rates relative to the inventory level and production stages during shortage period. The unique optimal solution is found by Mathematica 5.0. It is proved that service level and deteriorating rate have a greater impact on inventory total cost than demand increasing factor and lost sale factor by sensitivity analysis. The factors must be considered for inventory decision-making of production enterprises. 相似文献