共查询到19条相似文献,搜索用时 156 毫秒
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
移动模架在50m跨径现浇箱梁中的应用 总被引:1,自引:0,他引:1
根据移动模架在温州某桥50m跨径现浇箱梁施工中的应用情况,详细介绍了移动模架的构造、工作原理和现浇箱梁的施工工艺;通过利用移动模架进行跨径50m现浇箱梁施工的经验总结,指出了其在大跨径现浇箱梁施工过程中的经济性和施工质量及工期等方面的优越性;针对移动模架的技术要求,指出了其在中大跨径现浇箱梁中的应用前景。 相似文献
13.
在黑龙江省苇河林业局俱乐部内,采用滑移法对跨距21m、安装高度12.4m的钢屋架进行了安装试验。施工实践表明:采用滑移法在施工场地较小或受吊装设备条件限制的情况下进行钢屋架安装,不但可行,而且施工安全、保证了施工质量和进度。 相似文献
14.
上承式钢桁梁桥的刚度分析 总被引:3,自引:1,他引:2
杨仕若 《中南林业科技大学学报(自然科学版)》2010,30(2)
将列车-上承式钢桁梁桥视为一个整体振动系统。上承式钢桁梁桥采用桁段有限元法离散,列车采用具有26个自由度的二系弹簧车辆空间振动模型。应用弹性系统动力学总势能不变值原理及形成矩阵的"对号入座"法则,建立列车-桥梁时变系统的整体振动方程。以车辆构架在桥上实测的蛇形波作为激振源,计算了列车以不同的速度通过上承式桥梁时列车的振动响应,分析结果表明,该上承式钢桁梁桥具有足够的横、竖向刚度。 相似文献
15.
The main objective of this study was to determine which property, of the six strength and stiffness properties used in structural timber design, was the most influential in the design of nail-plated roof trusses. Thirty recently completed nail-plated roof truss designs were randomly selected from three roof truss manufacturing plants and a total of 8 758 individual truss members were analysed for bending stress, shear stress parallel to grain, tensile stress parallel to grain, compression stress parallel to grain and deflection. The mean strength and stiffness capacity utilised of all the different design properties was well below 50% for all of the different dimension classes. Of all the individual strength properties, the mean bending strength capacity utilised per member was found to be the highest. The results of this study can be used for decision support related to wood property evaluation through? out the structural lumber value chain where roof truss members are the end products. 相似文献
16.
钢箱梁及钢桁架城市人行天桥对比分析 总被引:1,自引:0,他引:1
钢箱梁桥在我国城市人行天桥中应用广泛,其优点是线型美观,工厂预制装配式施工方便等。然而由于需要控制竖向自振频率,钢箱梁一般梁高过高,造成压抑感强,两侧梯道过长等缺点也不容忽视,因此钢桁架桥在城市人行桥中也是一种可以广泛普及的桥型,本文对相同跨径的两种桥型就结构用钢量、竖向自振频率、施工性、梯道爬高等方面进行了综合对比。 相似文献
17.
网架结构常见的设计质量问题及预防措施 总被引:1,自引:0,他引:1
本文主要根据网架结构的受力及节点构造的特点,简要介绍了网架结构的一般规定、适用范围及在网架结构设计中应注意的设计质量问题和预防措施。 相似文献
18.
Philip L Crafford 《Southern Forests》2016,78(1):61-71
South Africa is a timber-scarce country that will most probably experience a shortage of structural softwood lumber in the near future. In this study the concept of using young, green finger-jointed Eucalyptus grandis lumber was evaluated for possible application in roof truss structures while the timber is still in the green, unseasoned state. Drying will occur naturally while the lumber is fixed within the roof truss structure. The objectives of this study were (1) to investigate the strength and stiffness variation of the finger-jointed E. grandis product in both the green and dry state for different age and dimension lumber, (2) to investigate the variation in density, warp and checking in the lumber when dried in a simulated roof-space environment and (3) to evaluate the potential of this finger-jointed product as a component in roof truss structures. Green finger-jointed E. grandis lumber of ages 5, 11 and 18 years and dimensions 48×73?mm and 36×111?mm from Limpopo province were evaluated. The study showed that the young finger-jointed E. grandis timber had very good flexural, tensile parallel to grain, and shear properties in both the green and dry state. The mean and characteristic modulus of elasticity and modulus of rupture values of the finger-jointed E. grandis product were higher and the variation lower in comparison to currently used South African pine sources. The tensile perpendicular to grain and compression perpendicular to grain strength did not conform to SANS requirements for the lowest structural grade (S5). Both tree age and product dimension were sources for variation in the physical and strength properties. Based on the results from this study the concept of producing roof trusses from green, finger-jointed young E. grandis timber has potential. 相似文献