共查询到20条相似文献，搜索用时 15 毫秒
1.
R. G. Mafia M. A. Ferreira E. A. V. Zauza J. F. Silva J. L. Colodette A. C. Alfenas 《Forest Pathology》2013,43(5):379-385
In this study, we determined the effects of Ceratocystis fimbriata wilt on volumetric growth and cellulose pulp yield of eucalyptus. Seven‐year‐old healthy and infected trees were separated into different classes of severity, and the individual volume of each whole tree with bark was determined. Volumetric losses were found regardless of the class of disease severity, resulting in reduction in volumetric growth of the trees from 65% to 87%, depending on the infection level. Two approaches were used for evaluating the effects of the disease on cellulose pulp yield: (i) evaluation of wood basic density and chemical composition, contents of ethanol/toluene extractives and Klason lignin, and the alkaline load and screen yield across Kraft pulping to kappa number 18 ± 0.5 for both healthy and discoloured materials; (ii) determination of the alkaline load and yield across Kraft pulping to kappa number 18 ± 0.5 of woods with different levels of discoloration (0, 25, 50, 75 and 100% of discoloured wood). Discoloured wood presented lower basic density, higher ethanol/toluene extractives and Klason lignin, higher alkaline load and lower pulp screened yield at kappa number 18 ± 0.5 compared with the healthy ones. Increasing the fraction of infected wood in chip furnishes resulted in proportionally increased alkaline load demand and decreased screen yields. Adding 50% of infected wood in the chip furnish resulted in 23.8% increase in the alkali load and 13.7% reduction in the pulp screen yield at kappa number 18 ± 0.5. The results obtained have proved that the disease reduces volumetric growth, increases wood consumption and reduces yield in eucalyptus pulp production. 相似文献
2.
《Southern Forests》2013,75(3-4):173-179
Pinus patula is the softwood species most extensively planted in South Africa. However, large portions of these plantings are under threat from Sirex noctilio infestation and occasional forest fires. In this exploratory investigation, the effects of tree age, Sirex noctilio infestation and fire damage to wood from Pinus patula trees on their pulp and paper properties were evaluated. Pulp was produced using the thermomechanical pulping (TMP) process. The energy consumption required to pulp the different pulpwood materials was determined. Pulps were beaten for five different time periods to investigate the development of the fibre properties in response to increasing energy input. Paper properties such as burst, tear strength and breaking length were determined on handsheets manufactured from unbeaten and beaten pulps. Box and line plots and canonical variate analysis biplots were used to statistically analyse the data. It was found that the burst strength of paper produced from healthy trees was significantly higher than that from sirex-infested or fire damaged (burnt) trees. Similarly, the tear strength of paper from healthy and burnt trees was significantly better than from sirex-infested or young trees. No significant differences in breaking length were evident between the pulpwood materials and an increase in beating time did not lead to any improvements. From this study it can be concluded that wood from dead or dying, sirex-infested and young trees produced paper with consistently lower strength properties compared to wood obtained from healthy 12-year-old trees. 相似文献
3.
分析了５个试验地尾叶桉纸浆材的主要化学成分含量和ｐＨ值在树干高度上的差异和变化趋势．结果表明,在５个试验地中,尾叶桉材的化学成分含量及ｐＨ值在树干高度上的变异情况大致相同．在不同的树干高度上,木材热水抽提物含量、纤维素含量和木素含量的差异达１％显著性水平;质量分数为１％ＮａＯＨ抽提物含量和戊聚糖含量的差异达５％显著性水平;冷水抽提物含量和ｐＨ值无统计上的显著性差异．由树基向上,冷水抽提物、热水抽提物和木素的含量呈渐低趋势;戊聚糖含量和木材ｐＨ值呈渐高趋势;１％ＮａＯＨ抽提物含量树干中部较低,两端较高;纤维素含量树干中部稍高,两端稍低． 相似文献
4.
5.
《Southern Forests》2013,75(3-4):181-189
Near-infrared (NIR) scanning technology is regarded as a potential tool for rapid determination of wood properties, which can substitute time-consuming and costly traditional methods. Pinus patula is the most important softwood species in South Africa, and this study is aimed at developing NIR calibration models for quick prediction of its pulp yield and chemical composition. A total of 85 trees from 17 plots, covering the range of site conditions in the Mpumalanga escarpment area, were sampled. Two samples were taken from each tree: a 1 m billet above breast height and a 20 mm disc at breast height. The billet was pulped using the kraft pulping process to determine pulp yield. The disc was ground into sawdust and the chemical composition was determined using conventional wet chemistry. Sawdust was scanned on a NIR spectrophotometer to produce NIR spectra. Calibration models to predict pulp yield, cellulose and lignin content were developed by applying chemometrics and partial least squares regression. Validation and determination of prediction accuracy of the models were performed using independent data. The prediction of cellulose and lignin were acceptable with correlations of determinations (r 2) of 0.71 and 0.70 respectively. Standard errors of prediction were generally low (less that 0.86) for all the models. The prediction r 2 for both total and screened pulp yield were only 0.62. Although the cellulose and lignin models can be used with confidence, the expansion of the sample size for follow-up research must be considered in order to increase the variability of tested wood properties and improve the prediction strength of the models. The NIR calibration provided in this study can contribute to the efficient examination of forest site-to-wood quality relationships that would enhance precision forest management and wood processing efficiency. 相似文献
6.
Fanni Fodor Róbert Németh Chiel Lankveld Tamás Hofmann 《Wood material science & engineering》2018,13(5):271-278
Common hornbeam (Carpinus betulus L.) is a highly underused wood species despite its great hardness, strength, wear-resistance and toughness. It is mainly used as firewood in Hungary because of its wood defects, irregular shape and low-dimensional stability. These wood defects and small breast height diameter result in a low yield. It is non-durable outdoors as it tends to turn grey, crack and be attacked by wood-decaying organisms. Indoors it lasts for hundreds of years. One technology that could improve the stability and durability properties is acetylation. Hornbeam was acetylated with the Accoya® method under industrial conditions. The aim of this research was the assessment of acetylation affecting the chemical properties of hornbeam wood and how these are related to the change in physical and mechanical properties. Main wood constituents (cellulose, hemicellulose, Klason lignin, extractives and ash content) were determined and compared. Chemical parameters related to the degradation of structural polymers were also evaluated (total phenolic and soluble carbohydrate contents, pH and buffering capacity, furfural, levulinic acid, formic acid, acetic acid). Structural changes in acetylated wood and in the Klason lignin fraction were also assessed using FTIR spectroscopy. 相似文献
7.
采用我国木材化学成分分析国家标准,对人工林米老排木材化学成分进行了测定和研究分析.结果表明:人工林米老排木材冷水抽提物含量和热水抽提物含量分别为2.67%和3.12%,1%NaOH抽提物含量为17.08%,纤维素含量为47.49%,综纤维素含量为80.42%,木素含量为28.80%,pH值为5.44;木材冷水抽提物和综纤维素含量在树干的不同高度上略有差异,但方差分析检验,差异不显著,热水抽提物、1%NaOH抽提物、纤维素和木素含量在树干的不同高度上差异显著,达到1%显著性水平;由树基往上,热水抽提物含量略呈两端高、中间低的趋势,冷水抽提物、1%NaOH抽提物和木素的含量逐渐降低,综纤维素含量和木材pH值逐渐升高;纤维素含量在树干上的分布规律为中间高、两端低,而且从树干中部往上的降低幅度较大. 相似文献
8.
火炬松纸浆材化学成分及其在树干高度上的变异规律 总被引：1，自引：1，他引：1
对18年生人工林火炬松纸浆材的化学成分含量进行了系统地测试,分析和讨论了火炬松化学成分含量在树干高度方向上的变异规律.结果表明:1、火炬松纸浆材的灰分、冷水、热水、苯醇和1%N aOH抽提物含量,纤维素、戊聚糖和木质素含量平均值分别为0.33%、1.59%、3.21%、2.32%和13.66%、47.98%、15.10%、29.66%;2、沿树干高度方向,火炬松木材灰分含量和纤维素含量变化不明显;热水和苯醇抽提物含量逐渐减小;冷水抽提物和木质素含量表现出先增加后减小或者逐渐减小的趋势;1%N aOH抽提物含量则表现出先减小后增加的趋势;戊聚糖含量表现出逐渐增加或减小的趋势.方差分析表明,火炬松木材各化学成分含量在沿树干高度方向的变化不显著. 相似文献
9.
瘿木是制作家具、工艺品的珍贵木材, 装饰性强, 商业价值高。文中通过调查可形成瘿木的树种及成因、材质特点及利用现状, 对瘿木的研究与利用进行了展望。调查发现有32科52属100余种瘿木树种, 树种丰富; 根癌农杆菌Agrobacterium tumfaciens、真菌、冻伤和林火等可使树木结瘤, 根癌农杆菌和冻伤使树木结瘤的过程都与树木形成层细胞的基因变异有关。目前已知几种瘿木的密度、尺寸稳定性和断裂能较正常材高; 几种瘿木木质素含量增加, 纤维素含量降低, 多种抽提物含量增加, 细胞形态变异。文中认为人工培育瘿木可尝试选择树龄较大的林木, 以真菌或细菌病原接种、低温刺激及火烧等方法促进其结瘤。 相似文献
10.
The aim of this study is to characterise the properties of juvenile and mature heartwood of black locust (Robinia pseudoacacia L.). Content, composition and the subcellular distribution of heartwood extractives were studied in 14 old-growth trees from
forest sites in Germany and Hungary as well as in 16 younger trees of four clone types. Heartwood extractives (methanol and
acetone extraction) were analysed by HPLC-chromatography. UV microspectrophotometry was used to topochemically localise the
extractives in the cell walls. The natural durability of the juvenile and mature heartwood was analysed according to the European
standard EN 350-1. Growth as well as chemical analyses showed that, based on extractives content, the formation of juvenile
wood in black locust is restricted to the first 10–20 years of cambial growth. In mature heartwood, high contents of phenolic
compounds and flavonoids were present, localised in high concentrations in the cell walls and cell lumen of axial parenchyma
and vessels. In juvenile wood, the content of these extractives is significantly lower. Juvenile wood had a correspondingly
lower resistance to decay by Coniophora puteana (brown rot fungus) and Coriolus versicolor (white rot fungus) than mature heartwood. 相似文献
11.
火炬松不同种源纸浆材材性的变异 总被引：1，自引：0，他引：1
1983年火炬松31个种源引种栽培在浙江富阳中国林业科学研究院亚热带林业研究所实验林场,研究表明该批种源间10年生树木生长量和纸浆材材性因子如晚材率、管胞形态特征值(管胞长度、宽度、腔径、壁厚、长宽比、腔径比、壁腔比)、管胞S2层微纤丝角和木材基本密度存在着显著差异,木材主要化学成分中纤维素和木素含量种源间存在着显著差异,而戊聚糖和苯醇浸提物含量种源间差异不显著.这些材性特征除了木材化学性状因子外,均受中等以上程度遗传控制.木材纤维素、木素、戊聚糖和苯醇浸提物含量的广义遗传力分别为0.088、0.003、0.340和0.307,其余性状广义遗传力均大于0.50.引种地栽培环境对木材性状有显著影响.种源原产地纬度与树木生长量、管胞宽度、管胞直径和管胞微纤丝角呈负相关,与晚材率、木材密度呈正相关.31个种源树木胸高直径与管胞长宽比、管胞壁腔比、木材密度呈显著负相关,与管胞宽度、管胞直径、管胞腔径比呈正相关. 相似文献
12.
《Wood material science & engineering》2013,8(3):165-173
ABSTRACTIn the present work, Eucalyptus nitens was thermally modified in an open (atmospheric pressure) and a closed (under pressure) reactor system. The effect of the changes of the chemical composition on the mechanical properties was investigated. Hemicelluloses, cellulose, lignin, extractives, acetic acid, formic acid, total phenols and the cellulose degree of polymerization (DP) as well as modulus of elasticity (MOE) and modulus of rupture (MOR) were measured for each modification. The results indicated that the closed system modification, particularly at high pressure, presented stronger variations on the chemical structure of the modified wood than the modifications in the open system. In both modifications, MOR showed a better correlation with the chemical changes than the MOE, especially xylose, cellulose DP, lignin and total phenols. These correlations suggest a tendency of a more brittle wood in the closed system modification at high pressure than in the modifications in the open system. Results can be used as a reference for future applications of thermally modified E. nitens wood. 相似文献
13.
Summary The purpose of this study was to determine the progressive changes in physical and chemical properties of Eucalyptus globulus wood under the action of a representative white rot fungus, Coriolus versicolor. Observations concerning the nature and relative effects on weight loss, hot water solubility, 1% sodium hydroxide solubility, Klason lignin, holocellulose, intrinsic viscosity and degree of polymerisation of holocellulose, pentosans, methoxyl value, neutral sugar composition and nitrobenzene oxidation products are discussed.The authors thank Dr. P. S. Rehill, the then Officer-in-Charge, Forest Pathology Branch, for valuable suggestions and providing facilities for decay experiments 相似文献
14.
工业林木荷木材化学成分及其变异的研究 总被引：2，自引：0，他引：2
按照国家木材化学成分分析标准,对工业林木荷木材化学成分进行了测定,结果表明12年生和14年生木荷木材化学成分含量为：热水抽提物6．93％和5．06％;1％NaOH抽提物18．42％、17．42％;苯醇抽提物1．64％、2．48％;纤维素48．06％、50．72％;多戊糖20．99％、20．68％;木质素24．20％、23．10％;pH值为5．46和4．99。以上7个指标在树干不同高度的差异均未达到显著性水平。而热水、苯醇抽提物含量和pH值在两树龄间的差异达到1％显著水平,1％NaOH抽提物和主要化学成份含量的差异不显著。 相似文献
15.
Bruno D. Mattos Tainise V. Lourençon Luis Serrano Jalel Labidi 《Wood material science & engineering》2016,11(4):209-216
This study aims to evaluate the chemical composition of wood and extractives of Pinus taeda and Schizolobium parahyba (guapuruvu) as potential feedstock for new applications in the biorefinery industry. For this purpose, their content of α-cellulose, hemicellulose, insoluble lignin, hot water solubility, NaOH1% solubility, inorganic materials (ash), and monomeric sugars by high-performance liquid chromatography was quantified. Attenuated total reflectance infrared spectroscopy and thermogravimetric analysis were also used to complete the physicochemical characterization of the studied woods. The extractives were obtained by soxhlet extraction with ethanol:toluene and dichloromethane and identified with pyrolysis-gas chromatography/mass spectroscopy technique. The results showed that guapuruvu wood has the higher amount of hemicellulose (16%) when compared to pine wood (10%), which resulted in higher solubility in alkali solution. Furthermore, in relation to other biomasses, the two woods presented more percentage of lignin and minor content of hemicelluloses. The P. taeda wood presented the highest percentage of extractives mainly composed of fatty acids and aromatic hydrocarbons, while guapuruvu wood had a higher percentage of phenolic compounds and also fatty acids. Both the materials have low content of extractives with dichloromethane and were mainly composed of lipophilic compounds. 相似文献
16.
Changes of major chemical components in larch wood through combined treatment of drying and heat treatment using superheated steam 总被引：2，自引：0，他引：2
Yonggun Park Soo-Kyeong Jang Jun-Ho Park Sang-Yun Yang Hyunwoo Chung Yeonjung Han Yoon-Seong Chang In-Gyu Choi Hwanmyeong Yeo 《Journal of Wood Science》2017,63(6):635-643
The effects of the combined treatment of drying and heat treatment using superheated steam (SHS) were studied relative to the changes of the major chemical components in larch wood. The green lumber was dried and heat-treated in SHS conditions of 250 °C and 0.5 MPa for 18 h, and the relative percentage contents of sugars, lignin, and extractives were investigated and compared with the relative percentage contents in the lumber heat-treated in hot air conditions of 250 °C and atmospheric pressure for 18 h. After both heat treatment methods, the relative percentage contents of xylan, mannan, galactan, and arabinan were greatly decreased, whereas that of the Klason lignin was increased, additionally that of glucan and extractives remained almost unchanged. Lignin may bind with furan compounds decomposed from hemicellulose following heat treatment, thus contributing to the increase in the apparent relative percentage contents of the Klason lignin. In addition, the condensate collected in the condenser after combined drying and heat treatment using SHS was investigated qualitatively and quantitatively by high-performance liquid chromatography (HPLC). A large amount of furfural and acetic acid decomposed from hemicellulose was detected and some sugar components composed of cellulose and hemicellulose were detected in the liquid condensate. 相似文献
17.
Garel Makouanzi Gilles Chaix Sophie Nourissier Philippe Vigneron 《Southern Forests》2018,80(2):151-158
Thirty-four Eucalyptus urophylla × Eucalyptus grandis hybrids were evaluated with a view to selecting for improved growth and wood-quality traits for plantations in the Congo. Height, circumference at breast height and volume were measured at 12, 27, 37, 49 and 60 months. Lignin content, the syringyl/guaiacyl ratio and total extractives content were predicted by near-infrared spectroscopy using wood powder samples collected from trees at breast height. While wood chemical properties were stable and under strong genetic control, growth traits were not. The genetic correlation between lignin content and growth was weak and negative, whereas the environmental correlation was also weak but positive. The genetic improvement of E. urophylla × E. grandis clones, based on growth features, leads to a limited decrease in lignin content and syringyl content and to a limited increase in extractives content. 相似文献
18.
《Wood material science & engineering》2013,8(3):157-164
ABSTRACTThis paper describes the chemical composition of sapwood (SW) and heartwood (HW) of Pinus halepensis Mill stem. Extractives were first isolated by accelerated solvent extraction and then analysed by gas chromatography-mass spectrometry (GC-MS). The cellulosic polysaccharide content present in the pre-extracted wood samples was determined with acid hydrolysis and GC. The hemicelluloses content was determined with acid methanolysis and GC. Free monomers were additionally analysed by GC. The amount of lignin was determined gravimetrically by the Klason lignin method and the acid-soluble lignin was determined by a UV method. Formic and acetic acids in wood were determined after alkaline hydrolysis and analysed by HP-SEC. It was found that lipophilic and hydrophilic extractives were more abundant in heartwood (1.6% and 2.5%) than in sapwood (1.1% and 1.8%). Celluloses content was higher in sapwood (42.5%) than in heartwood (39.7%), whereas lignin, hemicelluloses and sugar monomer contents were more abundant in heartwood (28.9%, 26.8% and 0.3%) than in sapwood (28.0%, 24.5% and 0.2%). The variation in acetic and formic acids and ash contents between sapwood (0.7%, 0.2% and 0.5%) and heartwood (0.6%, 0.1% and 0.4%) was small. The acetylation degrees were found to be slightly similar in sapwood (0.4) and heartwood (0.3). 相似文献
19.
Ana Lourenço Isabel Baptista Jorge Gominho Helena Pereira 《Journal of Wood Science》2008,54(6):464-469
The pulping wood quality of Acacia melanoxylon was evaluated in relation to the presence of heartwood. The sapwood and heartwood from 20 trees from four sites in Portugal
were evaluated separately at 5% stem height level in terms of chemical composition and kraft pulping aptitude. Heartwood had
more extractives than sapwood ranging from 7.4% to 9.5% and from 4.0% to 4.2%, respectively, and with a heartwood-to-sapwood
ratio for extractives ranging from 1.9 to 2.3. The major component of heartwood extractives was made up of ethanol-soluble
compounds (70% of total extractives). Lignin content was similar in sapwood and heartwood (21.5% and 20.7%, respectively)
as well as the sugar composition. Site did not influence the chemical composition. Pulping heartwood differed from sapwood
in chemical and optical terms: lower values of pulp yield (53% vs 56% respectively), higher kappa number (11 vs. 7), and lower
brightness (28% vs 49%). Acacia melanoxylon wood showed an overall good pulping aptitude, but the presence of heartwood should be taken into account because it decreases
the raw-material quality for pulping. Heartwood content should therefore be considered as a quality variable when using A. melanoxylon wood in pulp industries 相似文献
20.
Tran Ho Quang Nguyen Duc Kien Sara von Arnold Gunnar Jansson Ha Huy Thinh David Clapham 《New Forests》2010,39(3):301-312
Lignin and cellulose contents and wood basic density were related to diameter at breast height (DBH) in six fast-growing and
five slow-growing families from a combined progeny test and seedling seed orchard of Eucalyptus urophylla grown for 10 years in northern Vietnam. The mean cellulose content of the fast-growing families was significantly higher
than that of the slow growing-families (40.0 and 37.1%, respectively), and for individual trees cellulose content was significantly
correlated phenotypically with DBH. Wood basic density was significantly lower in the fast-growing group than in the slow-growing
group (0.506 and 0.535 g cm−3, respectively), and was significantly negatively correlated phenotypically with DBH. The lignin contents were not significantly
different between groups. Cellulose content and wood basic density were not correlated. The main conclusion is that there
is no obstacle to combining high growth rate with high cellulose content, for plantation of forests intended mainly for pulpwood. 相似文献