Purpose

The study aimed at comparing organic matter decomposition in two semi-natural agrobiocenozes, namely fallows and meadows, with similar plant biomass but differing in plant community composition and diversity and in succession stage.

Materials and methods

The decomposition rate of a standard material (cellulose) was measured in soils from six fallows and six meadows spanning a few kilometres apart. The mathematical model was fitted to the data.

Results and discussion

The model showed a significantly longer lag-time in cellulose decomposition in the meadows. Despite the delayed start of decomposition in the meadows, the estimated decomposition rates were similar in both ecosystem types, once the decay started.

Conclusions

The faster start of decomposition in fallows seems to be promoted by higher contents of nitrates and phosphates in the fallow soils. The fallows, as younger ecosystems, may have faster C turnover than older grasslands due to remains of fertilisers on these ex-arable fields.

Purpose

The use of composted sewage sludge and limestone outcrop residue in land rehabilitation, soil improvement, and technosol making can influence the mobility of nitrogen compounds in groundwater.

Materials and methods

This experiment analyzed this source of possible pollution under an experimental design based on the use of columns (0–30 cm) formed by both wastes and a heavy irrigation regime. Two waters of different quality (saline and non-saline) were used for irrigation. The presence of nitrate, nitrite, and ammonium in the leachates was checked.

Results and discussion

The environmental risk due to the presence of nitrogen species associated with the use of these materials was very low in general, although nitrate was the most important compound affected by the use of sewage sludge compost and saline water.

Conclusions

The combination of saline water for irrigation with the compost has to be seriously considered as a source of pollution for surface and ground waters, and the use of both resources may be a key factor to be studied (low-quality water and sewage sludge compost).

Purpose

Cohesive sediment is able to flocculate and create flocs, which are larger than individual particles and less dense. The phenomenon of flocculation has an important role in sediment transport processes such as settling, deposition and erosion. In this study, laboratory experiments were performed to investigate the effect of key hydrodynamic parameters such as suspended sediment concentration and salinity on floc size and settling velocity. Results were compared with previous laboratory and field studies at different estuaries.

Materials and methods

Experimental tests were conducted in a 1-L glass beaker of 11-cm diameter using suspended sediment samples from the Severn Estuary. A particle image velocimetry system and image processing routine were used to measure the floc size distribution and settling velocity.

Results and discussion

The settling velocity was found to range from 0.2 to 1.2 mm s^?1. Settling velocity changed in the case of increasing suspended sediment concentration and was controlled by the salinity. The faster settling velocity occurred when sediment concentration is higher or the salinity is lower than 2.5. On the other hand, at salinities higher than 20, in addition to increasing SSC, it was found that the situation was reversed, i.e. the lower the sediment concentration, the faster the settling velocity.

Conclusions

Sediment flocculation is enhanced with increasing sediment concentration but not with increasing salinity.

Purpose

The low conductivity of sediments for mass and electron transport is the most severe limiting factor in sediment microbial fuel cells (SMFCs), so that sediment ameliorations yielded more remarkable effects than electrode improvements. The objective of this research was to enhance the electricity generation of SMFCs with amendments of biochar to freshwater sediments for conductivity enhancement.

Materials and methods

Laboratory-scale SMFCs were constructed and biochars were produced from coconut shells at different temperatures. Variations in the power output, electrode potential, internal resistance, total organic carbon (TOC) content, and microbial communities were measured.

Results and discussion

Amending with biochar reduced the charge transfer resistances of SMFCs and enriched the Firmicutes (mainly Fusibacter sp.) in the sediment, which improved the SMFC power generation by two- to tenfold and enhanced the TOC removal rate by 1.7- to fourfold relative to those without the amendment.

Conclusions

The results suggested that biochar amendment is a promising strategy to enhance SMFC power production, and the electrical conductivity of biochar should be considered important when interpreting the impact biochar has on the electrical performance of soil or freshwater sediment MFCs.

Purpose

Nanoparticles (NPs) have received increased attention in recent past due to their unique distinct properties. Metal-based NPs are widely used in chemical and allied sector. Most of the research is directed to study the efficiency of NPs in medicine and agriculture. The aim of this review is to explore the possible threats posed by toxicity of various NPs on plants and microbial diversity.

Materials and methods

First, major sources of NPs to the environment were analyzed. The effects of metal-based NPs on the microbiota and plants are presented in this review. The results obtained by the authors during last 12 years of research are used.

Results and discussion

The exposure of soil to nanoparticles causes a decrease in soil microbial biomass and enzymatic activity, which impacts microbial community composition including yeasts, bacteria, fungi, and biological diversity. The effects of NPs on plants result in various types of abnormalities. Nanoparticles can also pose risks to human health.

Conclusions

Increased applications of NPs pose a threat to beneficial microbial communities as well as crops and soils. Thus, it is important to explore whether NPs could compromise crop yield, soil properties, soil organisms, and functional activities of soil.

Purpose

This study aimed at evaluating the acute effects of arsenic and zinc to the warmwater aquatic oligochaete Branchiura sowerbyi. Relative sensitivity with the coldwater species Tubifex tubifex was compared. Implications for the use of B. sowerbyi in the risk assessment of sediments in the tropics are discussed.

Materials and methods

Water-only (96 h) and sediment (14 days) toxicity tests were conducted with both species evaluating a concentration series of arsenic and zinc. The tests were conducted considering the environmental conditions in the natural habitat of T. tubifex (predominantly temperate) and B. sowerbyi (predominantly tropical). Both lethal and sublethal endpoints (autotomy of the posterior body parts, abnormal behavior and appearance) were determined in the tests. The lethal (LC₁₀ and LC₅₀) and effect (EC₁₀ and EC₅₀) concentrations were also determined to assess metal sensitivity for both species.

Results and discussion

Both test species were more sensitive to Zn than As in water-only tests, which is in agreement with previous studies evaluating the toxicity of these metals to aquatic oligochaetes. Sublethal effects were generally noted at concentrations lower than those leading to mortality. The warmwater oligochaete B. sowerbyi was more sensitive to both metals tested than the coldwater species T. tubifex.

Conclusions

Study findings support the need for using indigenous tropical species in risk assessments in the tropics. In addition, sublethal effect parameters should be included in toxicity testing with aquatic oligochaetes.

Purpose

Fungi are essential components of soil microbial communities and have a crucial role in biogeochemical processes. Alpine regions are sensitive to climate change, and the importance of changes in fungal community composition along altitudinal gradients in alpine regions is hotly debated.

Materials and methods

We used 454 pyrosequencing approaches to investigate the fungal communities at 1600, 2300, 2800, 3000, and 3900 m above sea level along an altitudinal gradient on Mount Gongga.

Results and discussion

The results showed that Agaricomycetes, Sordariomycetes, and Tremellomycetes are the dominant classes at all sampling sites. Operational taxonomic unit richness decreased with increasing altitude, and the fungal communities were clustered into three groups that corresponded to altitudes of, i.e., 1600, 2300, and above 2800 m. The evenness of fungi was not significantly correlated with altitude, whereas beta diversities were significantly correlated with altitude. The distance-based redundancy analysis and Mantel test indicated that the composition of fungal assemblages was mostly driven by altitude and temperature.

Conclusions

Our results indicated that ecological processes possibly related to altitude and temperature play an important role in structuring fungal biodiversity along the elevational gradient. Our results highlight that different microbes may respond differently to environmental gradients.

Purpose

The synthetic soil based bioremediation approach as reasonable and sustainable practice at the farming level where desired bioremediation could be established at lower cost.

Materials and methods

Metal-tolerant bacteria from different environmental field samples, (a) a municipal dump site, (b) an agricultural field and (c) sludge of electro-plating industries, were screened and characterized. Bioremediation of metal contaminants through isolated bacteria was compared under two different conditions, synthetic soil and basic minimal media containing copper, cobalt and nickel.

Results and discussion

The pollutants arising from industrial effluents are imparting a huge negative impact on agricultural land. Microbes are predominant in heavy metal-contaminated sites, which signifies as a potential opportunity for the researchers towards bioremediation. Three bacterial species showed high metal tolerance; 16S ribosomal DNA (rDNA) analysis revealed that the organisms were Proteus vulgaris strain, Stenotrophomonas sp. and Bacillus thuringiensis. Percentage removal of metals was also analysed under different concentrations and pH.

Conclusions

The current tested methods are helpful in streamlining the natural compliance of fragile elements and its uptake into the microbial system under in vitro and in situ conditions.

Purpose

The objective of this work was to identify hyperaccumulator plants and evaluate their capacity on copper mine tailings in the Antofagasta Region (Chile), considered one of the most arid in the world.

Materials and methods

Two native plant species, Gazania rigens and Pelargonium hortorum, were grown during 11 weeks on mine tailings. The physico-chemical characterization of the mine tailings under study indicated that the substrate required conditioning to support a phytoremediation system. In this respect, organic and inorganic amendments and mycorrizhal fungi were added to the substrate. Three treatments were designed to assess the effects of the amendments through an analysis of variance.

Results and discussion

Indicators of plant growth and development were measured weekly, and concentrations of Cd, Cu, Fe, Mn, Pb, Al, and Zn in roots of tailing-grown plants and substrate were measured at the end of the experiment.

Conclusions

The results were used to determine the bioconcentration factor (BCF), which demonstrated that both species act as excluders of Fe, Mn, Pb, Al, and Zn. In addition, it was found that both species present characteristics of potential accumulators of Cu.

Purpose

The present paper concerns the distribution and mobility of heavy metals (Cu, Pb, Zn and Fe) in the soils of some abandoned mine sites in Italy and their transfer to wild flora.

Materials and methods

Soils and plants were sampled from mixed sulphide mine dumps in different parts of Italy, and the concentrations of heavy metals were determined.

Results and discussion

The phytoremediation ability of Salix species (Salix eleagnos, Salix purpurea and Salix caprea), Taraxacum officinale and P?lantago major for heavy metals and, in particular, zinc was estimated. The results showed that soils affected by mining activities presented total Zn, Cu, Pb and Fe concentrations above the internationally recommended permissible limits. A highly significant correlation occurred between metal concentrations in soils.

Conclusions

The obtained results confirmed the environmental effects of mine waste; exploring wild flora ability to absorb metals, besides metal exploitation, proved a useful tool for planning possible remediation projects.

Purpose

In a 6-year study, we investigated the effectiveness of blind inlets as a conservation practice in reducing pesticide losses compared to tile risers from two closed farmed depressional areas (potholes) in the US Midwest under a 4-year cropping rotation.

Materials and methods

In two adjacent potholes within the same farm and having similar soils, a conventional tile riser and blind inlet were installed. Each draining practice could be operated independent of each other in order to drain and monitor each depression with either practice. Sampling events (runoff events) were collected from the potholes from 2008 to 2013 using autosamplers. The samples were analyzed for atrazine, metolachlor, 2,4-D, glyphosate, and deethylatrazine.

Results and discussion

The results of this study demonstrated that the blind inlet reduced analyzed pesticide losses; however, the level of reduction was compound dependent: atrazine (57 %), 2,4-D (58 %), metolachlor (53 %), and glyphosate (11 %).

Conclusions

Results from this study corroborate previous research findings that blind inlets are an effective conservation practice to reduce discharge and pollutants, including pesticides from farmed pothole surface runoff in the US Midwest.

Purpose

A simple and highly efficient economic method for the analysis of 11 antibacterial drugs including two tetracyclines, three quinolones, four sulfonamides, chloramphenicol and tylosin, in livestock manure, was developed using solid-phase extraction (SPE) and high-performance liquid chromatography (HPLC).

Materials and methods

The analytes were successively extracted by EDTA-McIlvaine solution and organic solvent mixture. The extracts were degreased with n-hexane and cleaned through SPE on a hydrophile-lipophile balance (HLB) cartridge. All compounds were determined on a C18 reverse phase column with gradient elution.

Results and discussion

Recoveries calculated from spiked samples of animal manures ranged from 62.65 to 99.16 % for 11 antibiotics with relative standard deviations of less than 10.0 %. Limits of detection ranged from 0.1 to 1.9 μg kg^?1, and limits of quantification ranged from 0.3 to 5.9 μg kg^?1.

Conclusions

The results show that SPE-HPLC is an inexpensive and practical method for rapid detection of multiple antibiotics in animal manure.

Purpose

The study aimed at comparing the effects of different water managements on soil Cd immobilization using palygorskite, which was significant for the selection of reasonable water condition.

Materials and methods

Field experiment was taken to discuss the in situ remediation effects of palygorskite on Cd-polluted paddy soils, under different water managements, using a series of variables, including pH and extractable Cd in soils, plant Cd, enzyme activity, and microorganism number in soils.

Results and discussion

In control group, the pH in continuous flooding was the highest under three water conditions, and compared to conventional irrigation, continuous flooding reduced brown rice Cd by 37.9%, and brown rice Cd in wetting irrigation increased by 31.0%. In palygorskite treated soils, at concentrations of 5, 10, and 15 g kg^?1, brown rice Cd reduced by 16.7, 44.4, and 55.6%; 13.8, 34.5, and 44.8%; and 13.1, 36.8, and 47.3% under continuous flooding, conventional irrigation, and wetting irrigation (p < 0.05), respectively. The enzyme activity and microbial number increased after applying palygorskite to paddy soils.

Conclusions

Continuous flooding was a good candidate as water management for soil Cd stabilization using palygorskite. Rise in soil enzyme activity and microbial number proved that ecological function regained after palygorskite application.

Purpose

Bacteria able to extracelluar respiration, which could be enriched in the anode of microbial fuel cells (MFCs), play important roles in dissimilatory iron reduction and arsenic (As) desorption in paddy soils. However, the response of the bacteria to As pollution is unknown.

Materials and methods

Using soil MFCs to investigate the effects of As on anode respiring bacteria (ARB) communities in paddy soils exposed to As stress. The soil MFC performances were evaluated by electrochemical methods. The bacterial community compositions on anodes were studied using Illumina sequencing.

Results and discussion

In wet 1 phase, polarization curves of MFCs showed cathode potentials were enhanced at low As exposure but inhibited at high As exposure. In the meantime, anode potentials increased with As levels. The dry-wet alternation reduced As levels in porewater and their impacts on electrodes microorganisms. Arsenic addition significantly influenced the anode microbial communities. After dry-wet cycles, Deltaproteobacteria dominated in the anode with high As.

Conclusions

The dynamic changes of the communities on cathodes and anodes of soil MFCs in paddy soils with different As addition might be explained by their different mechanisms for As detoxification. These results provide new insights into the microbial evolution in As-contaminated paddy soils.

Purpose

The present study deals with the geochemical fractions of Pb, Cd, Zn, Cu and As present on profiles using chemical simple extraction process. This work was conducted on Portman Bay, located in the SE Spain and strongly affected by mining activities.

Materials and methods

Four simple extractions were applied to selected samples in order to evaluate the potential mobility of metals. X-ray diffraction (XRD) was applied to the characterisation of samples and the residues remaining after each extraction, providing additional information about the sediment phases carrying the elements studied.

Results and discussion

The results obtained after the extractions suggested that the highest potentially toxic element (PTE) content was obtained in the oxidising medium. The mineralogical composition is an important factor that should be taken into account in the evaluation of PTE mobility, firstly because the mineral phases react differently in the proposed situations depending on their chemical nature, and secondly, because the presence of a particular phase depends on the degree of weathering.

Conclusions

The evaluation of PTE mobility and mineralogical composition under different environmental conditions may be very important in the execution of restoration projects which could involve dredging and mobilisation of materials.

Purpose

The objectives of this study were to investigate (i) how the changes in cultivation pattern of vegetable affect soil microbial communities and (ii) the relationships between soil physico-chemical properties and microbial community structure.

Materials and methods

Soil samples were collected from fields growing vegetable crops with various times of plastic-greenhouse cultivation (0, 1, 4, 7 and 15 years, respectively). Phospholipid fatty acid (PLFA) analysis was conducted to reveal the soil microbial community of the test soils.

Results and discussion

The open-field soil had the highest total PLFAs amount. Although the Shannon-Weaver index was also highest in the open-field soil, the difference was not significant. Plastic-greenhouse cultivation decreased PLFAs species diversity and richness. Cluster analysis and principal component analysis (PCA) of the PLFA profiles revealed distinct groupings at different times during plastic-greenhouse cultivation.

Conclusions

Ultimately, PLFA analyses showed that long-term plastic-greenhouse cultivation make the physiological status of soil microbial community worse and increased stress level of microorganisms. And soil microbial community was significantly affected by field water capacity and water-soluble organic carbon. The study highlights the potential risk of long-term plastic-greenhouse cultivation to soil microbial community.

Purpose

Chinese fir (Cunninghamia lanceolata (Lamb.) Hook) is an important native tree species in China. Consecutive cropping traditionally occurs in Chinese fir plantations (CFPs), but this practice has resulted in productivity declines in subsequent rotations. This study was designed to better understand the change of soil properties in the continuous cropping CFPs.

Materials and methods

We investigated soil pH, soil organic matter (SOM), and nutrient contents in different soil layers and in rhizosphere soil (RS) and non-rhizosphere soil (NRS) under CFPs of different ages and in different rotations.

Results and discussion

In the upper (0–20 cm) soil layer, soil pH decreased, while SOM increased, beneath mature CFPs with consecutive rotations. Total nitrogen (TN), available potassium, and available phosphorus contents in the upper soil layers did not differ significantly with consecutive rotations. Soil pH in RS was significantly lower than in NRS under mature plantations of the third rotation. Soil organic matter, TN, and available nitrogen did not differ between RS and NRS. Available phosphorus in RS was consistently lower than in NRS, and was highly deficient in the third rotation.

Conclusions

We conclude that no severe soil nutrient degradation occurred in the continuous cropping CFPs examined in this study, with soil acidification and phosphorus deficiency being two primary problems observed.

Purpose

Occlusion of carbon (C) within phytoliths, biogenic silica deposited in plant tissues and returned to the soil, is an important mechanism for long-term terrestrial biogeochemical C sequestration and might play a significant role in mitigating climate change.

Materials and methods

Subtropical and tropical soil profiles (to 100 cm depth) developed on granite and basalt were sampled using a mass-balance approach to explore the influence of climate and lithology on soil phytolith-occluded carbon (PhytOC) accumulation.

Results and discussion

Soil PhytOC storage in the subtropics was significantly greater than in the tropics, with the soil profiles developed on granite storing greater PhytOC than soils derived on basalt. Phytolith and PhytOC content decreased with depth in all soil profiles. Phytolith content showed a positive correlation with the soil bio-available silicon in the soil profiles developed on basalt, while a negative correlation was observed in soil profiles developed on granite.

Conclusions

Climate and lithology have a significant impact on soil PhytOC sequestration. The management of forests (e.g., afforestation and reforestation) and external silicon amendments (e.g., basalt powder amendment) in soils, especially those developed on granite, have the potential to enhance PhytOC accumulation in forest ecosystems.

Objective

The avoidance test withE. fetida was performed as laboratory comparison test. The results were compared with those of the earthworm acute and reproduction tests carried out with the same soils.

Methods

The three tests were performed by three laboratories using eight contaminated soils and three control soils. The contaminated soils were mixed with the control soils to obtain different concentrations of the contamination.

Results and Discussion

The results of the avoidance test show that despite the partially considerable standard deviations a 72% agreement in the assessment of soils was reached with a toxicity criterion of >80% avoidance response. The sensitivity is at least that for the reproduction test and considerably surmounts the sensitivity of the acute test.

Recommendation and Outlook

The avoidance test is considered to be a suitable screening test for assessing the habitat function of soils. The whole test design could be improved by reducing the standard deviations among parallel test batches. With regard to standardization it is recommended to use control soils which have the same properties as the soils described in respective guidelines (e.g. ISO 11269-2, OECD 216, 217).

Purpose

The validity of soil erosion data is often questioned because of the variation between replicates. This paper aims to evaluate the relevance of interreplicate variability to soil and soil organic carbon (SOC) erosion over prolonged rainfall.

Materials and methods

Two silty loams were subjected to simulated rainfall of 30 mm h^?1 for 360 min. The entire rainfall event was repeated ten times to enable statistical analysis of the variability of the runoff and soil erosion rates.

Results and discussion

The results show that, as selective removal of depositional particles and crust formation progressively stabilized the soil surface, the interreplicate variability of runoff and soil erosion rates declined considerably over rainfall time. Yet, even after the maximum runoff and erosion rates were reached, the interreplicate variability still remained between 15 and 39 %, indicating the existence of significant inherent variability in soil erosion experiments.

Conclusions

Great caution must be paid when applying soil and SOC erosion data after averaging from a small number of replicates. While not readily applicable to other soil types or rainfall conditions, the great interreplicate variability observed in this study suggests that a large number of replicates is highly recommended to ensure the validity of average values, especially when extrapolating them to assess soil and SOC erosion risk in the field.