首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 62 毫秒
1.
Four experiments were conducted in two commercial packing plants to evaluate the effectiveness of a commercial online video image analysis (VIA) system (the Computer Vision System equipped with a BeefCam module [CVS BeefCam]) to predict tenderness of beef steaks using online measurements obtained at chain speeds. Longissimus muscle (LM) samples from the rib (Exp. 1, 2, and 4) or strip loin (Exp. 3) were obtained from each carcass and Warner-Bratzler shear force (WBSF) was measured after 14 d of aging. The CVS BeefCam output variable for LM area, adjusted for carcass weight (cm2/kg), was correlated (P < 0.05) with WBSF values in all experiments. The CVS BeefCam lean color measurements, a* and b*, were effective (P < 0.05) in all experiments for segregating carcasses into groups that produced LM steaks differing in WBSF values. Fat color measurements by CVS BeefCam were usually ineffective for segregating carcasses into groups differing in WBSF values; however, in Exp. 4, fat b* identified a group of carcasses that produced tough LM steaks. Quality grade factors accounted for 3, 18, 21, and 0% of the variation in WBSF among steaks in Exp. 1 (n = 399), 2 (n = 195), 3 (n = 304), and 4 (n = 184), respectively, whereas CVS BeefCam output variables accounted for 17, 30, 19, and 6% of the variation in WBSF among steaks in Exp. 1, 2, 3, and 4, respectively. A multiple linear regression equation developed with data from Exp. 2 accurately classified carcasses in Exp. 1 and 4 and thereby may be useful for decreasing the likelihood that a consumer would encounter a tough (WBSF > 4.5 kg) LM steak in a group classified as "tender" by CVS BeefCam compared with an unsorted population. Online measurements of beef carcasses by use of CVS BeefCam were useful for predicting the tenderness of beef LM steaks, and sorting carcasses using these measurements could aid in producing groups of beef carcasses with more uniform LM steak tenderness.  相似文献   

2.
Video image analysis (VIA) images from grain-finished beef carcasses [n = 211; of which 63 did not receive zilpaterol hydrochloride (ZIL) and 148 received ZIL before harvest] were analyzed for indicators of muscle and fat to illustrate the ability to improve methodology to predict saleable meat yield of cattle fed and not fed ZIL. Carcasses were processed in large commercial beef processing facilities and were fabricated into standard subprimals, fat, and bone. Images taken by VIA technology were evaluated using computer image analysis software to quantify fat and lean parameters which were subsequently used in multiple-linear regression models to predict percentage of saleable meat yield for each carcass. Prediction models included variables currently quantified by VIA technology such as LM area (LMA), subcutaneous (SC) fat thickness at 75% the length of the LM (SFT75), and intramuscular fat score (IMF). Additional distance and area measures included LM width (LW), LM depth (LD), iliocostalis muscle area (IA), SC fat thickness at 25, 50, and 100% the length of the LM (SFT25, SFT50, SFT100), SC fat area from 25 to 100% the length of the LM (SCFA), and SC fat area adjacent to the 75% length of the LM from the spinous processes (SCFA75). Multiple ratio and product variables were also created from distance and area measures. For carcasses in this investigation, a 6 variable equation (Adj. R(2) = 0.62, MSE = 0.022) was calculated which included coefficients for ZIL treatment, SCFA75, LW, SCFA, SCFA/HCW, and SFT100/HCW. Use of parameters in the U.S. (Adj. R(2) = 0.39, MSE = 0.028) and Canadian [Adj. R(2) = 0.10, root mean square error (MSE) = 0.034] yield grade equations lack the predictability of the newly adapted equations developed for ZIL-fed and non-ZIL-fed cattle. Prediction equations developed in this study indicate that the use of VIA technology to quantify measurements taken at the 12th/13th rib separation could be used to predict saleable meat yield more accurately than those currently in use by U.S. and Canadian grading systems. Improvement in saleable meat yield prediction has the potential to decrease boxed beef variability via more homogeneous classification of carcass fabrication yield.  相似文献   

3.
In two phases, this study assessed the ability of two video image analysis (VIA) instruments, VIASCAN and Computer Vision System (CVS), to augment assignment of yield grades (YG) to beef carcasses to 0.1 of a YG at commercial packing plant speeds and to test cutout prediction accuracy of a YG augmentation system that used a prototype augmentation touchpanel grading display (designed to operate commercially in real-time). In Phase I, beef carcasses (n = 505) were circulated twice at commercial chain speeds (340 carcasses per hour) by 12 on-line USDA graders. During the first pass, on-line graders assigned a whole-number YG and a quality grade (QG) to carcasses as they would normally. During the second pass, on-line graders assigned only adjusted preliminary yield grades (APYG) and QG to carcasses, whereas the two VIA instruments measured the longissimus muscle area (LMA) of each carcass. Kidney, pelvic, and heart fat (KPH) was removed and weighed to allow computation of actual KPH percentage. Those traits were compared to the expert YG and expert YG factors. On-line USDA graders' APYG were closely related (r = 0.83) to expert APYG. Instrument-measured LMA were closely related (r = 0.88 and 0.94; mean absolute error = 0.3 and 0.2 YG units, for VIASCAN and CVS, respectively) to expert LMA. When YG were augmented using instrument-measured LMA and computed either including or neglecting actual KPH percentage, YG were closely related (r = 0.93 and 0.92, mean absolute error = 0.32 and 0.40 YG units, respectively, using VIASCAN-measured LMA; r = 0.95 and 0.94, mean absolute error = 0.24 and 0.34 YG units, respectively, using CVS-measured LMA) to expert YG. In Phase II, augmented YG were assigned (0.1 of a YG) to beef carcasses (n = 290) at commercial chain speeds using VIASCAN and CVS to determine LMA, whereas APYG and QG were determined by online graders via a touch-panel display. On-line grader YG (whole-number), expert grader YG (to the nearest 0.1 of a YG), and VIASCAN- and CVS-augmented YG (to the nearest 0.1 of a YG) accounted for 55, 71, 60, and 63% of the variation in fabricated yields of closely trimmed subprimals, respectively, suggesting that VIA systems can operate at current plant speeds and effectively augment official USDA application of YG to beef carcasses.  相似文献   

4.
With the adoption of visual instrument grading, the calculated yield grade can be used for payment to cattle producers selling on grid pricing systems. The USDA beef carcass grading standards include a relationship between required LM area (LMA) and HCW that is an important component of the final yield grade. As noted on a USDA yield grade LMA grid, a 272-kg (600-lb) carcass requires a 71-cm(2) (11.0-in.(2)) LMA and a 454-kg (1,000-lb) carcass requires a 102-cm(2) (15.8-in.(2)) LMA. This is a linear relationship, where required LMA = 0.171(HCW) + 24.526. If a beef carcass has a larger LMA than required, the calculated yield grade is lowered, whereas a smaller LMA than required increases the calculated yield grade. The objective of this investigation was to evaluate the LMA to HCW relationship against data on 434,381 beef carcasses in the West Texas A&M University (WTAMU) Beef Carcass Research Center database. In contrast to the USDA relationship, our data indicate a quadratic relationship [WTAMU LMA = 33.585 + 0.17729(HCW) -0.0000863(HCW(2))] between LMA and HCW whereby, on average, a 272-kg carcass has a 75-cm(2) (11.6-in.(2)) LMA and a 454-kg carcass has a 96-cm(2) (14.9-in.(2)) LMA, indicating a different slope and different intercept than those in the USDA grading standards. These data indicate that the USDA calculated yield grade equation favors carcasses lighter than 363 kg (800 lb) for having above average muscling and penalizes carcasses heavier than 363 kg (800 lb) for having below average muscling. If carcass weights continue to increase, we are likely to observe greater proportions of yield grade 4 and 5 carcasses because of the measurement bias that currently exists in the USDA yield grade equation.  相似文献   

5.
Our objective was to determine the effect of repeated use of implants on feedlot performance and carcass characteristics of Holstein cattle. Holstein steers (n = 128) weighing an average of 211 kg were blocked by weight and randomly assigned to 16 pens. At the start of the trial (d 0), pens were assigned to one of four treatments: 1) nonimplanted control (C); 2) implant on d 0, 112, and 224 (T3); 3) implant on d 112 and 224 (T2); and 4) implant on d 224 (T1). Component TE-S implants (120 mg of trenbolone acetate and 24 mg of estradiol per implant) were used for all treatments during the 291-d feeding period. Over the course of the study, T2 and T3 cattle had greater ADG and final weights than C and T1 cattle (P < 0.05). Steers were harvested at a commercial abattoir on d 291. Hot carcass weights of T3 steers were greater than those of C and T1 steers (P < 0.05). Dressing percentage, adjusted 12th-rib fat, percentage of kidney, pelvic, and heart fat, yield grade, and longissimus color were not different among treatments (P > or = 0.26). Longissimus muscle areas (LMA) of T2 and T3 carcasses were larger than LMA of C (P < 0.01). No USDA Select carcasses were produced from C cattle, whereas the percentage of Select carcasses from implanted cattle ranged from 10 to 18%. Skeletal maturity advanced (P < 0.05) progressively with each additional implant. Steaks from T3 carcasses had a higher percentage of protein than controls (P < 0.05) and were less tender than all other treatments (P < 0.05). Repeated administration of combination trenbolone acetate and estradiol implants increased ADG and resulted in heavier carcasses with larger LMA. Administration of three successive implants decreased tenderness of Holstein beef, and resulted in more advanced skeletal maturity scores.  相似文献   

6.
The establishment and evaluation of an assessment system to accredit sonographers for measuring the carcass traits of subcutaneous fat depths and longissimus muscle area (LMA) on potential breeding animals by real-time ultrasound is described. Repeatability of operators, variation between the animal's left and right sides, and variations in technique were assessed from measurements and repeat measurements of 30 cattle by up to eight operators at three testing sessions. Accuracy of carcass data was determined by repeatability of measurements, variability between measurers, between left and right sides of the carcass, and variation due to handling and dressing procedures. Correlations with carcass data averaged .92 for rump fat, .90 for rib fat, and .87 for LMA. Residual SD averaged .81 mm, .88 mm, and 5.1 cm2. A very experienced sonographer can measure LMA only marginally less accurately than it can be measured on the carcass. In Session 3, the SE between repeat fat measurements for accredited sonographers averaged .43 mm, indicating that fat depths can be measured more accurately, but when comparing measurements from different operators, adjustments may be required for differences in technique, otherwise overall accuracy will be about the same, approximately 1 mm. Scanned rump fat measurements were consistently approximately 20% higher than on the chilled, hanging carcass 24 h after slaughter; after applying the standard correction factor of 1.17, LMA measurements were similar. Scan and carcass rib fat measurements were similar for animals with less than or equal to 10 mm of fat cover, above which carcass measurements tended to be higher.  相似文献   

7.
Knowledge of the genetic control of pork quality traits and relationships among pork quality, growth, and carcass characteristics is required for American swine populations. Data from a 2 x 2 diallel mating system involving Landrace and Duroc pigs were used to estimate heritabilities and genetic correlations among growth (ADG), real-time ultrasonic (US) measures of backfat thickness (BF) and longissimus muscle area (LMA), carcass characteristics, and various pork quality traits. Data were collected from 5,649 pigs, 960 carcasses, and 792 loin chops representing 65, 49, and 49 sires, respectively. Genetic parameters were estimated by REML assuming animal models. Heritability estimates were moderate to high for ADG, USBF, USLMA, carcass BF, and LMA, percentage of LM lipid (IMF), pork tenderness, and overall acceptability. Estimates were low to moderate for percentage of cooking loss, pH, shear force, percentage of LM water, water-holding capacity (WHC), pork flavor, and juiciness. Genetic correlations between US and carcass measures of BF and LMA indicate that selection based on US data will result in effective improvement in carcass characteristics. Selection for increased LMA and(or) decreased BF using US is, however, expected to result in decreased IMF and WHC, increased percentage of LM water and shear value, and in decreased juiciness, tenderness, and pork flavor. Average daily gain was favorably correlated with IMF and unfavorably correlated with shear force. Selection for increased ADG is expected to improve WHC but to decrease the percentage of LM water, with an associated decrease in juiciness. The results of this study suggest the feasibility of including meat quality in selection objectives to improve product quality. Favorable genetic correlations between IMF and eating quality traits suggest the possible merit of including IMF in the selection objective to improve, or restrict change in, pork eating quality.  相似文献   

8.
The present experiment was conducted to evaluate the ability of the U.S. Meat Animal Research Center's beef carcass image analysis system to predict calculated yield grade, longissimus muscle area, preliminary yield grade, adjusted preliminary yield grade, and marbling score under commercial beef processing conditions. In two commercial beef-processing facilities, image analysis was conducted on 800 carcasses on the beef-grading chain immediately after the conventional USDA beef quality and yield grades were applied. Carcasses were blocked by plant and observed calculated yield grade. The carcasses were then separated, with 400 carcasses assigned to a calibration data set that was used to develop regression equations, and the remaining 400 carcasses assigned to a prediction data set used to validate the regression equations. Prediction equations, which included image analysis variables and hot carcass weight, accounted for 90, 88, 90, 88, and 76% of the variation in calculated yield grade, longissimus muscle area, preliminary yield grade, adjusted preliminary yield grade, and marbling score, respectively, in the prediction data set. In comparison, the official USDA yield grade as applied by online graders accounted for 73% of the variation in calculated yield grade. The technology described herein could be used by the beef industry to more accurately determine beef yield grades; however, this system does not provide an accurate enough prediction of marbling score to be used without USDA grader interaction for USDA quality grading.  相似文献   

9.
The present experiments were conducted to determine whether improved beef longissimus shear force methodology could be used to assess pork longissimus tenderness. Specifically, three experiments were conducted to: 1) determine the effect of belt grill (BG) cookery on repeatability of pork longissimus Warner-Bratzler shear force (WBSF), 2) compare the correlation of WBSF and slice shear force (SSF) with trained sensory panel tenderness ratings, and 3) estimate the repeatability of pork longissimus SSF for chops cooked with a BG. In Exp. 1 and 2, the longissimus was removed from the left side of each carcass (Exp. 1, n = 25; Exp. 2, n = 23) at 1 d postmortem and immediately frozen to maximize variation in tenderness. In Exp. 1, chops were cooked with either open-hearth electric broilers (OH) or BG, and WBSF was measured. Percentage of cooking loss was lower (P < 0.001) and less variable for chops cooked with a BG (23.2%; SD = 1.7%) vs. OH (27.6%; SD = 3.0%). Estimates of the repeatability of WBSF were similar for chops cooked with OH (0.61) and BG (0.59). Although significant (P < 0.05), differences in WBSF (4.1 vs. 3.9 kg) between cooking methods accounted for less than 5% of the total variation in WBSF. In Exp. 2, the correlation of SSF (r = -0.72; P < 0.001) with trained sensory panel tenderness ratings was slightly stronger than the correlation of WBSF (r = -0.66; P < 0.001) with trained sensory panel tenderness ratings, indicating that the two methods had a similar ability to predict tenderness ratings. In Exp. 3, duplicate samples from 372 carcasses at 2 and 10 d postmortem were obtained, cooked with BG, and SSF was determined. The repeatability of SSF was 0.90, which is comparable to repeatability estimates for beef and lamb. Use of BG cookery and SSF could facilitate the collection of accurate pork longissimus tenderness data. Time and labor savings associated with BG cookery and the SSF technique should help to decrease research costs.  相似文献   

10.
The objectives of this study were 1) to determine which longissimus thoracis et lumborum steaks were appropriate for slice shear force measurement and 2) to determine the among and within institution variation in LM slice shear force values of 6 institutions after they received expert training on the procedure and a standard kit of equipment. In experiment 1, longissimus thoracis et lumborum muscles were obtained from the left sides of 50 US Select carcasses. Thirteen longissimus thoracis and 12 longissimus lumborum steaks were cut 2.54 cm thick from each muscle. Slice shear force was measured on each steak. Mean slice shear force among steak locations (1 to 25) ranged from 19.7 to 27.3 kg. Repeatability of slice shear force (based on variance) among steak locations ranged from 0.71 to 0.96. In experiment 2, the longissimus thoracis et lumborum were obtained from the left sides of 154 US Select beef carcasses. Eight 2.54-cm-thick steaks were obtained from the caudal end of each frozen longissimus thoracis, and six 2.54-cm-thick steaks were obtained from the cranial end of each frozen longissimus lumborum. Seven pairs of consecutive steaks were assigned for measurement of slice shear force. Seven institutions were assigned to steak pairs within each carcass using a randomized complete block design, such that each institution was assigned to each steak pair 22 times. Repeatability estimates for slice shear force for the 7 institutions were 0.89, 0.83, 0.91, 0.90, 0.89, 0.76, and 0.89, respectively, for institutions 1 to 7. Mean slice shear force values were least (P <0.05) for institutions 3 (22.7 kg) and 7 (22.3 kg) and were greatest (P <0.05) for institutions 5 (27.3 kg) and 6 (27.6 kg). Institutions with greater mean slice shear force (institutions 5 and 6) used cooking methods that required more (P <0.05) time (32.0 and 36.9 min vs. 5.5 to 11.8 min) to reach the end point temperature (71 degrees C) and resulted in greater (P <0.05) cooking loss (both 26.6% vs. 14.4 to 24.1%). Differences among institutions in the repeatability of slice shear force were partially attributable to differences among institutions in the consistency of steak thawing and cooking procedures. These results emphasize the importance of sample location within the muscle and cooking method in the measurement of tenderness and indicate that with proper training and application of the protocol, slice shear force is a highly repeatable (R approximately 0.90) measure of beef LM tenderness.  相似文献   

11.
This study was performed to validate previous equations and to develop and evaluate new regression equations for predicting lamb carcass fabrication yields using outputs from a lamb vision system-hot carcass component (LVS-HCC) and the lamb vision system-chilled carcass LM imaging component (LVS-CCC). Lamb carcasses (n = 149) were selected after slaughter, imaged hot using the LVS-HCC, and chilled for 24 to 48 h at -3 to 1 degrees C. Chilled carcasses yield grades (YG) were assigned on-line by USDA graders and by expert USDA grading supervisors with unlimited time and access to the carcasses. Before fabrication, carcasses were ribbed between the 12th and 13th ribs and imaged using the LVS-CCC. Carcasses were fabricated into bone-in subprimal/primal cuts. Yields calculated included 1) saleable meat yield (SMY); 2) subprimal yield (SPY); and 3) fat yield (FY). On-line (whole-number) USDA YG accounted for 59, 58, and 64%; expert (whole-number) USDA YG explained 59, 59, and 65%; and expert (nearest-tenth) USDA YG accounted for 60, 60, and 67% of the observed variation in SMY, SPY, and FY, respectively. The best prediction equation developed in this trial using LVS-HCC output and hot carcass weight as independent variables explained 68, 62, and 74% of the variation in SMY, SPY, and FY, respectively. Addition of output from LVS-CCC improved predictive accuracy of the equations; the combined output equations explained 72 and 66% of the variability in SMY and SPY, respectively. Accuracy and repeatability of measurement of LM area made with the LVS-CCC also was assessed, and results suggested that use of LVS-CCC provided reasonably accurate (R2 = 0.59) and highly repeatable (repeatability = 0.98) measurements of LM area. Compared with USDA YG, use of the dual-component lamb vision system to predict cut yields of lamb carcasses improved accuracy and precision, suggesting that this system could have an application as an objective means for pricing carcasses in a value-based marketing system.  相似文献   

12.
One hundred beef carcasses were selected at three packing plants and were used to determine the relationship between glycolytic potential (GP) and dark, firm, and dry (DFD) beef and to determine the effects of DFD status and GP on cooked beef palatability. Eight individual muscles were excised from one hindquarter of each carcass at d 7 postmortem: longissimus lumborum, psoas major, gluteus medius, tensor fasciae latae, rectus femoris, semimembranosus, biceps femoris, and semitendinosus. Ultimate pH, colorimeter readings, and Warner-Bratzler shear force were determined for all eight muscles at d 7 postmortem. A nine-member trained sensory panel evaluated cooked longissimus lumborum, gluteus medius, and semimembranosus steaks. Traits determined solely for the longissimus lumborum were GP (2 x [glycogen + glucose + glucose-6-phosphate] + lactate) and ether-extractable fat. A curvilinear relationship existed between GP and ultimate pH within the longissimus muscle. There appeared to be a GP threshold at approximately 100 micromol/g, below which lower GP was associated with higher ultimate pH and above which GP had no effect on ultimate pH. The greatest pH and muscle color differences between normal and DFD carcasses were observed in the longissimus lumborum, gluteus medius, semimembranosus, and semitendinosus muscles. Cooked longissimus from DFD carcasses had higher shear force values (46% greater) and more shear force variation (2.3 times greater variation) than those from normal carcasses. Dark cutting carcasses also had higher shear force values for gluteus medius (33% greater) and semimembranosus (36% greater) than normal carcasses. Sensory panel tenderness of longissimus, gluteus medius, and semimembranosus was lower for DFD carcasses than for normal carcasses. Longissimus and gluteus medius flavor desirability scores were lower for DFD than for normal carcasses. Steaks from DFD carcasses had more off-flavor comments than steaks from normal carcasses, specifically more "peanutty," "sour," and "bitter" flavors. The DFD effect of higher shear force values was approximately five times greater (+3.11 kg vs +0.63 kg) for carcasses with "slight" marbling scores than for carcasses with "small" marbling scores. In general, higher GP was associated with increased tenderness, even among normal carcasses. In conclusion, low GP was associated with DFD beef and resulted in substantially less-palatable cooked steaks.  相似文献   

13.
Experiments were conducted to compare the effects of two cookery methods, two shear force procedures, and sampling location within non-callipyge and callipyge lamb LM on the magnitude, variance, and repeatability of LM shear force data. In Exp. 1, 15 non-callipyge and 15 callipyge carcasses were sampled, and Warner-Bratzler shear force (WBSF) was determined for both sides of each carcass at three locations along the length (anterior to posterior) of the LM, whereas slice shear force (SSF) was determined for both sides of each carcass at only one location. For approximately half the carcasses within each genotype, LM chops were cooked for a constant amount of time using a belt grill, and chops of the remaining carcasses were cooked to a constant endpoint temperature using open-hearth electric broilers. Regardless of cooking method and sampling location, repeatability estimates were at least 0.8 for LM WBSF and SSF. For WBSF, repeatability estimates were slightly higher at the anterior location (0.93 to 0.98) than the posterior location (0.88 to 0.90). The difference in repeatability between locations was probably a function of a greater level of variation in shear force at the anterior location. For callipyge LM, WBSF was higher (P < 0.001) at the anterior location than at the middle or posterior locations. For non-callipyge LM, WBSF was lower (P < 0.001) at the anterior location than at the middle or posterior locations. Consequently, the difference in WBSF between callipyge and non-callipyge LM was largest at the anterior location. Experiment 2 was conducted to obtain an estimate of the repeatability of SSF for lamb LM chops cooked with the belt grill using a larger number of animals (n = 87). In Exp. 2, LM chops were obtained from matching locations of both sides of 44 non-callipyge and 43 callipyge carcasses. Chops were cooked with a belt grill and SSF was measured, and repeatability was estimated to be 0.95. Repeatable estimates of lamb LM tenderness can be achieved either by cooking to a constant endpoint temperature with electric broilers or cooking for a constant amount of time with a belt grill. Likewise, repeatable estimates of lamb LM tenderness can be achieved with WBSF or SSF. However, use of belt grill cookery and the SSF technique could decrease time requirements which would decrease research costs.  相似文献   

14.
The objective of this study was to determine technician effects of live animal ultrasonic estimates of fat thickness (FTU) and longissimus muscle area (LMAU). Steers (n = 36) representing four breed-types (Brown Swiss, Average Zebu-cross Mexican, Corriente Mexican, and typical British crossbred) of commercial slaughter cattle were isonified to estimate accuracy and repeatability of fat thickness (FT) and longissimus muscle area (LMA) measurements by two experienced technicians. Repeated measures of FTU and LMAU were taken by technicians on two consecutive days with an Aloka 500V ultrasound unit equipped with a 3.5-MHz, 172-mm scanning width, linear-array transducer. Ultrasonic estimates of fat thickness and LMAU were taken at the 12th and 13th rib interface 48 h before slaughter; carcass fat thickness (FTC) and longissimus muscle area (LMAC) were measured 48 h postmortem. Means for FTU, FTC, LMAU, and LMAC were .91 +/- .36 cm, .82 +/- .40 cm, 70.7 +/- 9.43 cm2, and 72.4 +/- 8.9 cm2, respectively. Ultrasound and carcass measures of FT and LMA were different (P less than .01) among breed-types but were not different (P greater than .10) between technicians or for technician x breed-type interactions. Pooled simple correlation coefficients (P less than .01) were .87 and .86 between FTU and FTC and .76 and .82 between LMAU and LMAC for Technicians 1 and 2, respectively. Repeatabilities estimated by intraclass correlation methods were .91 +/- .03 and .81 +/- .06 for images repeated over 2 d and .95 +/- .02 and .83 +/- .05 for images repeated by two technicians for FT and LMA, respectively.(ABSTRACT TRUNCATED AT 250 WORDS)  相似文献   

15.
A survey of beef muscle color and pH   总被引：4，自引：0，他引：4  
The objectives of this study were to define a beef carcass population in terms of muscle color, ultimate pH, and electrical impedance; to determine the relationships among color, pH, and impedance and with other carcasses characteristics; and to determine the effect of packing plant, breed type, and sex class on these variables. One thousand beef carcasses were selected at three packing plants to match the breed type, sex class, marbling score, dark-cutting discount, overall maturity, carcass weight, and yield grade distributions reported for the U.S. beef carcass population by the 1995 National Beef Quality Audit. Data collected on these carcasses included USDA quality and yield grade data and measurements of muscle color (L*, a*, b*), muscle pH, and electrical impedance of the longissimus muscle. About one-half (53.1%) of the carcasses fell within a muscle pH range of 5.40 to 5.49, and 81.3% of the carcasses fell within a longissimus muscle pH range of 5.40 to 5.59. A longissimus muscle pH of 5.87 was the approximate cut-off between normal and dark-cutting carcasses. Frequency distributions indicated that L* values were normally distributed, whereas a* and b* values were abnormally distributed (skewed because of a longer tail for lower values, a tail corresponding with dark-cutting carcasses). Electrical impedance was highly variable among carcasses but was not highly related to any other variable measured. Color measurements (L*, a*, b*) were correlated (P < 0.05) with lean maturity score (-.58, -.31, and -.43, respectively) and with muscle pH (-.40, -.58, and -.56, respectively). In addition, fat thickness was correlated with muscle pH and color (P < 0.05). There was a threshold at approximately .76 cm fat thickness, below which carcasses had higher muscle pH values and lower colorimeter readings. Steer carcasses (L* = 39.62, a* = 25.20, and b* = 11.03) had slightly higher colorimeter readings (P < 0.05) than heifer carcasses (L* = 39.20, a* = 24.78, and b* = 10.80) even though muscle pH was not different between steer and heifer carcasses. Dairy-type carcasses (pH = 5.59, L* = 37.56, a* = 23.40, and b* = 9.68) had higher muscle pH values and lower colorimeter readings than either native-type (pH = 5.50, L* = 39.55, a* = 25.13, and b* = 11.00) or Brahman-type (pH = 5.46, L* = 39.75, a* = 25.17, and b* = 11.05) carcasses (P < 0.05).  相似文献   

16.
The present experiments were conducted to field test a system optimized for online prediction of beef LM tenderness based on visible and near-infrared (VISNIR) spectroscopy and to develop and validate a model for prediction of tenderness that would be unbiased by normal variation in bloom time before application of VISNIR. For both Exp. 1 and 2, slice shear force (SSF) was measured on fresh (never frozen) steaks at 14 d postmortem. Carcasses with VISNIR-predicted SSF ≤15 kg were classified as VISNIR predicted tender and carcasses with VISNIR-predicted SSF >15 kg were classified as VISNIR not predicted tender. In Exp. 1, spectroscopy was conducted online, during carcass grading, at 3 large-scale commercial fed-beef processing facilities. Each carcass (n = 1,155) was evaluated immediately after ribbing and again when the carcass was graded. For model development and validation, carcasses were blocked by plant and observed SSF. One-half of the carcasses (n = 579) were assigned to a calibration data set, which was used to develop regression equations, and one-half of the carcasses (n = 576) were assigned to a prediction data set, which was used to validate the regression equations. Carcasses predicted tender by VISNIR spectroscopy had smaller (P < 10(-19)) mean LM SSF values at 14 d postmortem in the calibration (13.9 vs. 16.5 kg) and prediction (13.8 vs. 16.4 kg) data sets than did carcasses not predicted tender by VISNIR spectroscopy. Relative to carcasses not predicted tender by VISNIR, a decreased percentage of carcasses predicted tender by VISNIR had LM SSF >25 kg in the calibration (2.0 vs. 7.8%) and prediction (0.8 vs. 8.0%) data sets. In Exp. 2, carcasses (n = 4,204) were evaluated with VISNIR online at 6 commercial fed-beef processing facilities on 38 production days. The carcasses predicted tender by VISNIR spectroscopy had decreased mean LM SSF values at 14 d postmortem (16.3 vs. 19.9 kg; P < 10(-87)), longer sarcomere lengths (1.77 vs. 1.72 μm; P < 10(-10)), and a greater percentage of desmin degraded (42 vs. 34%; P < 10(-5)) by 14 d postmortem. Relative to carcasses not predicted tender by VISNIR, a decreased percentage of carcasses predicted tender by VISNIR had LM SSF >25 kg (4.9 vs. 21.3%). The present experiments resulted in development and independent validation of a robust method to noninvasively predict LM tenderness of grain-fed beef carcasses. This technology could facilitate tenderness-based beef merchandising systems.  相似文献   

17.
The objective of this study was to benchmark carcasses and muscles from commercially identified fed (animals that were perceived to have been fed an increased plane of nutrition before slaughter) and nonfed cull beef and dairy cows and A-maturity, USDA Select steers, so that the muscles could be identified from cull cow carcasses that may be used to fill a void of intermediately priced beef steaks. Carcass characteristics were measured at 24 h postmortem for 75 carcasses from 5 populations consisting of cull beef cows commercially identified as fed (B-F, n = 15); cull beef cows commercially identified as nonfed (B-NF, n = 15); cull dairy cows commercially identified as fed (D-F, n = 15); cull dairy cows commercially identified as nonfed (D-NF, n = 15); and A-maturity, USDA Select grade steers (SEL, n = 15). Nine muscles were excised from each carcass [m. infraspinatus, m. triceps brachii (lateral and long heads), m. teres major, m. longissimus dorsi (also termed LM), m. psoas major, m. gluteus medius, m. rectus femoris, and m. tensor fasciae latae] and subjected to Warner-Bratzler shear force testing and objective sensory panel evaluation after 14 d of postmortem aging. Carcass characteristics differed (P < 0.05) among the 5 commercially identified slaughter groups for the traits of lean maturity, bone maturity, muscle score, HCW, fat color, subjective lean color, marbling, ribeye area, 12th-rib fat thickness, and preliminary yield grade. Carcasses from commercially identified, fed cull cows exhibited more (P < 0.01) weight in carcass lean than did commercially identified, nonfed cull cows. There was a group x muscle interaction (P = 0.02) for Warner-Bratzler shear force. Warner-Bratzler shear force and sensory overall tenderness values demonstrates that muscles from the SEL group were the most tender (P < 0.01), whereas muscles from the B-NF group were the least tender (P < 0.01). Sensory, beef flavor intensity was similar (P > 0.20) among cull cow carcass groups and more intense (P < 0.01) than the SEL carcass group. Muscles from the SEL group exhibited less (P < 0.01) detectable off-flavor than the cull cow carcass groups, whereas the B-NF group exhibited the most (P < 0.01) detectable off-flavor. Although carcass and muscle quality from commercially identified, fed, cull beef and dairy cows was not similar to A-maturity, USDA Select beef, they did show improvements when compared with nonfed, cull, beef and dairy cow carcasses and muscles.  相似文献   

18.
Two hundred beef carcasses were randomly selected by dental classification (zero, two, four, six, or eight permanent incisors) from a population of 11,136 carcasses harvested by a large commercial beef processor. Warner-Bratzler shear force and trained sensory panel evaluations of longissimus thoracis steaks as well as cooking and carcass traits were evaluated for differences among dental classes. No differences in Warner-Bratzler shear force (P = 0.60), sensory panel evaluations (P = 0.64) for tenderness, or percentage of total cooking loss (P = 0.73) were found among the five dental classes. Longissimus muscle color, USDA marbling score, hot carcass weight, adjusted fat thickness, longissimus muscle area, and USDA yield grade did not differ among the five dental classes. A significant dental classification x sex interaction indicated that heifers advanced in skeletal and overall maturity at a much faster rate than steers. An increase of intramuscular fat was associated (P < 0.05) with decreased shear force (r = -0.31), whereas darkening of the lean (r = 0.16), advancing lean maturity (r = 0.21), and increased evaporative cooking loss (r = 0.39) were associated (P < 0.05) with increased shear force values. Warner-Bratzler shear force measurements were not related to sensory panel overall tenderness scores. Carcass traits accounted for a relatively small proportion of the variation in tenderness of longissimus steaks, and dental classification was not related to tenderness.  相似文献   

19.
Accuracy and repeatability of live-animal ultrasound measures, and the relationships of these measures with subprimal yields and carcass value, were investigated using data from 172 wethers. Wethers were F(1) progeny from the mating of 4 terminal sire breeds to Rambouillet ewes and were finished in a feedlot to a mean BW of 62.9 kg (SD = 9.5 kg). Before transport to slaughter, LM area, LM depth, and backfat thickness were measured from transverse ultrasound images taken between the 12th and 13th ribs. After slaughter, these measures were taken on each carcass. Carcasses were fabricated into subprimal cuts, and weights were recorded. Ultrasound accuracy and repeatability were assessed using bias, SE of prediction, SE of repeatability, and simple correlations. Relationships among ultrasound and carcass measures, and between these measures and carcass yield and value, were evaluated using residual correlations and linear prediction models. Ultrasound bias approached 0 for LM area, and backfat thickness was overestimated by only 0.69 mm. The SE of prediction and r were 1.55 cm(2) and 0.75 for LM area, and 1.4 mm and 0.81 for backfat thickness, respectively. The SE of repeatability was 1.31 cm(2) and 0.75 mm for LM area and backfat thickness, respectively. At a standardized BW and backfat thickness, wethers with larger LM area and LM depth yielded larger and more valuable carcasses, and these relationships were detectable with ultrasound. For each SD increase in carcass LM area, dressing percentage increased 1.57 percentage points, gross carcass value increased US$5.12, and boxed carcass value increased US$6.84 (P < 0.001). For each SD increase in ultrasound LM area, dressing percentage increased 0.95 percentage points, gross carcass value increased US$3.15, and boxed carcass value increased US$3.86 (P < 0.001). When LM area effects were adjusted for carcass weight, the response in boxed carcass value attributed to disproportionate increases in high-value subprimal cut weights was small. Associations of dressing percentage and carcass value with ultrasound and carcass LM depth were significant (P < 0.01) but smaller than corresponding associations with LM area. These data indicate biological and economical incentives for increasing LM area in wethers, and live-animal ultrasound can provide reliable estimates of carcass measures. These results are applicable to terminal sire breeders and producers who market sheep using carcass-merit pricing systems.  相似文献   

20.
The present experiment was conducted to provide a validation of a previously developed model for online classification of US Select carcasses for LM tenderness based on visible and near-infrared (VISNIR) spectroscopy and to determine if the accuracy of VISNIR-based tenderness classification could be enhanced by making measurements after postmortem aging. Spectroscopy was conducted online, during carcass grading, at a large-scale commercial fed beef-processing facility, and the strip loin was obtained from the left side of US Select carcasses (n = 467). Slice shear force (SSF) was measured on fresh steaks at 2 and 14 d postmortem. Online VISNIR tenderness classes differed in mean SSF values at both 2 d (29.4 vs. 33.6 kg) and 14 d (18.0 vs. 21.2 kg) postmortem (P < 10(-7)). Online VISNIR tenderness classes differed in both the percentage of carcasses with LM SSF values greater than 40 kg at 2 d postmortem (5.1 vs. 21.0%; P < 10(-6)) and the percentage of carcasses with LM SSF values greater than 25 kg at 14 d postmortem (6.8 vs. 23.2%; P < 10(-5)). Whereas 15.0% of the carcasses sampled for this experiment had LM SSF values greater than 25 kg at 14 d postmortem, only 6.8% of the carcasses classified as tender by VISNIR had LM SSF values greater than 25 kg. All the carcasses sampled that had LM SSF values greater than 35 kg at 14 d postmortem were accurately classified as tough by VISNIR. Before measurement of SSF on d 14, VISNIR spectroscopy was conducted on the SSF steak. Tenderness classes based on d 14 VISNIR spectra differed both in mean SSF value at 14 d postmortem (17.7 vs. 21.6 kg; P < 10(-11)) and the percentage of carcasses with LM SSF values greater than 25 kg at 14 d postmortem (7.3 vs. 22.7%; P < 10(-5)). These data support our previous work showing that VISNIR spectroscopy can be used to classify US Select carcasses noninvasively for LM tenderness, and the results establish that this technology could also be applied to aged US Select strip loins. This technology would allow packing companies and other segments of the beef marketing chain to identify US Select carcasses or strip loins that excel in LM tenderness for use in branded beef programs.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号