首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 546 毫秒
1.
Viscoelastic thermal compression (VTC) is a type of thermal-hydro-mechanical (THM) processing that requires only a short processing time. THM processing causes some chemical transformations, the nature and extent of hydro-thermolysis depends on the special treatment conditions and the chemical nature of wood species. In the present study, the chemical transformations of the cell wall components and wood extractives during VTC treatment were investigated, and correlation between chemical characterizations and observed property changes was analyzed. For this purpose, the content of extractives and pH values were determined, and FTIR analysis was performed on extractable substances, extract-free wood, holocellulose, α-cellulose and lignin. Two temperatures and two steam exposure times were adopted to determine the influence of processing conditions on chemical characterization of Tsuga heterophylla. The results revealed that THM treatment caused a series of chemical reactions in extractives. Treatment temperature and conditioning time have significant influence on chemical changes of extractives. For all of the VTC treatments used in this study, no significant changes occurred in the lignin and α-cellulose components. The only significant chemical changes occurred in the hemicelluloses, which were primarily reduction of carbonyl and acetyl functional groups. This study also confirmed that the chemical transformation of wood correlates with property changes of VTC wood.  相似文献   

2.
采用硫酸水解法(aldito-acetate procedure)、X射线粉末衍射(XRD)、傅里叶变换红外光谱(FTIR)分析了蒸爆过程中毛竹材加工剩余物纤维聚集态结构及主要化学成分的变化.研究结果表明,(1)毛竹材加工剩余物经蒸爆处理,60%左右的半纤维素水解,木质素低分子化且裸露到纤维表面,易被80%乙醇及木质素溶剂提取,从而实现毛竹材加工剩余物主要组分的有效分离.(2)毛竹材加工剩余物经蒸爆处理,80%乙醇抽提物得率提高,综纤维素得率减少,木质素含量减少:葡萄糖相对含量增加,半纤维素降解明显.(3)210℃处理10 min和220℃处理10 min的蒸爆浆的化学组成变化几乎没有区别,但两者与200℃处理10 min差别较大,210℃处理10 min是毛竹材加工剩余物适宜的处理温度.(4)FTIR结果显示蒸爆处理后在1040～1060 cm-1区的吸收峰分裂为明显的2个峰表明半纤维素降解,1166 cm-1处的吸收强度明显减弱,表明C-O-C键有不同程度的断裂.X-身寸线衍射分析结果显示毛竹材加工剩余物蒸爆处理后纤维素相对结晶度增加.  相似文献   

3.
竹重组材的X射线光电子能谱分析   总被引：1，自引：0，他引：1  
应用X射线光电子能谱分析(XPS)的技术手段,以冷压热固化与热压法两种生产模式的竹重组材为研究对象,分析其竹材表面元素组成及相对含量的变化。试验结果表明,冷、热压法竹重组材表面的C、O及相对含量有明显差异。从C原子结合形式来看,冷压法与热压法相比,冷压法竹重组材CA(-C-C或-C-H)含量增加明显,CB(C-O或C-OH)含量减少明显,CC(C=O)含量减少,CD(O-C=O)变化不大。说明竹材纤维素、半纤维素、木素,以及抽提物含量等化学组分出现不同程度的变化,进而影响二类竹重组材产品的物理力学性能。  相似文献   

4.
This study aims to evaluate the chemical composition of wood and extractives of Pinus taeda and Schizolobium parahyba (guapuruvu) as potential feedstock for new applications in the biorefinery industry. For this purpose, their content of α-cellulose, hemicellulose, insoluble lignin, hot water solubility, NaOH1% solubility, inorganic materials (ash), and monomeric sugars by high-performance liquid chromatography was quantified. Attenuated total reflectance infrared spectroscopy and thermogravimetric analysis were also used to complete the physicochemical characterization of the studied woods. The extractives were obtained by soxhlet extraction with ethanol:toluene and dichloromethane and identified with pyrolysis-gas chromatography/mass spectroscopy technique. The results showed that guapuruvu wood has the higher amount of hemicellulose (16%) when compared to pine wood (10%), which resulted in higher solubility in alkali solution. Furthermore, in relation to other biomasses, the two woods presented more percentage of lignin and minor content of hemicelluloses. The P. taeda wood presented the highest percentage of extractives mainly composed of fatty acids and aromatic hydrocarbons, while guapuruvu wood had a higher percentage of phenolic compounds and also fatty acids. Both the materials have low content of extractives with dichloromethane and were mainly composed of lipophilic compounds.  相似文献   

5.
Studies of the degradation and protection of wood surfaces   总被引：6，自引：2，他引：6  
Summary Large weight losses occurred in thin veneers of radiata pine (P. radiata) during natural weathering due mainly to loss of lignin and hemicelluloses. This was demonstrated by direct chemical analysis and by spectrocopic techniques. Treatment of veneers with dilute aqueous solutions of the recognized surface stabilizing compound chromium trioxide was found to dramatically restrict weight loss during weathering, but similar applications of ferric compound were less effective (Evans, Schmalzl 1989). In order to rationalize these protective effects FTIR internal reflectance spectroscopy was used to study chemical changes taking place at the wood surface upon treatment and during weathering. The spectra obtained provide direct evidence for the modification and stabilization of the lignin aromatic system with aqueous chromium trioxide and to a lesser extent with ferric salts. It is postulated that photostable lignin complexes are formed. The implications of these findings for the development of improved surface stabilizing compounds for wood are discussed briefly.The authors wish to thank the following: Tom Syers and Lloyd Vickers (C.S.I.R.O., Division of Forestry and Forest Products); Helen Neave, and Clive Hilliker (Australian National University, Department of Forestry) for technical assistance, and the Stanley Melbourne Bruce fund for financially supporting part of the work  相似文献   

6.
The aim of this study was to evaluate the chemical composition and the dynamic water vapour sorption properties of Eucalyptus pellita wood thermally modified in vacuum. For this purpose, wood samples were thermally modified in a vacuum oven at 160–240 °C for 4 h. Chemical composition were investigated by wet chemical analysis, elemental analysis, as well as Fourier transform infrared (FTIR) analysis, and dynamic water vapour sorption properties were evaluated by dynamic vapour sorption apparatus. The results showed that holocellulose and alpha-cellulose contents decreased and lignin and extractives contents relatively increased during the heat process. Elemental analysis showed a reduction in hydrogen content and an increase in carbon content. FTIR analysis indicated that the degradation of hemicellulose and condensation reactions of lignin occurred. In addition, the thermo-vacuum resulted in a reduction in the equilibrium moisture content of wood during the adsorption or desorption process. And the sorption hysteresis had a decreasing trend with increasing treatment temperature. The development of the hygroscopicity was related to the increase in the relative content of lignin, the degradation of the carbonyl groups in xylan and the loss of carbonyl group linked to the aromatic skeleton in lignin after heat treatment.  相似文献   

7.
The effects of high temperature, moisture, and mechanical action during the thermo-hydro-mechanical (THM) processing, on the changes in surface properties of poplar, namely, surface color, roughness, wettability, and microstructure, were investigated in this study. The correlation between observed changes in surface properties and chemical characteristics was also analyzed. Poplar woods with high moisture content were compressed using different pressures at temperature of 160 °C for four different periods. The wood surfaces became darker and smoother, and their surface free energy decreased significantly after the THM process. THM process markedly reduced surface hygroscopicity compared to the control wood. The cell lumens of THM wood became narrow with increasing compression ratio due to the enhancing high pressure. Collapse and fractures of cell walls developed during THM treatment. Furthermore, results indicated that a series of chemical reactions in different components of wood took place during THM process, such as degradation of hemicelluloses, condensation of lignin, and decomposition of extractives. In turn, these chemical modifications contributed to the darkening of color as well as the reduction of wettability and surface free energy of THM wood.  相似文献   

8.
热处理是木材加工行业中常用的处理手段之一,可有效提升木材尺寸稳定性及具有防生物侵蚀能力,但在一定程度上也会降低木材的力学性能.热处理导致木材材性变化的根本原因是木材组分含量及其分子结构在热量作用下发生了变化.笔者探索了不同热处理温度下(150,165,180,195和210℃)桃花心木材的化学组分变化.结果表明:经热处...  相似文献   

9.
Chemical composition of Norway spruce and pine, two softwood species, has been investigated by X-ray Photoelectron Spectroscopy (XPS). Contrary to results previously obtained with beech wood, which allow to obtain information on bulk chemical composition from surface composition analysis, XPS analysis appears to be unsuitable for the characterisation of Norway spruce and pine wood chemical composition. Indeed, chemical compositions calculated from XPS data differ strongly from those obtained from microanalyses which are in good agreement with theoretical composition described in the literature. XPS analysis of both the softwood surfaces indicated high carbon contents explained by migration of lipophilic extractives to the surface under the influence of the vacuum necessary for XPS analysis. Nonvolatile extractives contained in wood were extracted and deposited on glass plates and analysed. Survey and detailed C1s spectra indicated similar signals to those recorded on wood surfaces. This phenomenon was not observed when samples had been previously extracted before analysis. These results strongly evidenced that extractives present in both species are able to migrate through resin canals from the bulk of the sample to the surface when put into ultra high vacuum. XPS presents, therefore, some limits in the case of the analysis of softwood species containing extractives able to migrate to the surface during analysis. This behaviour, difficult to control, could lead to erroneous interpretations due to extractives enrichment of the surface under the effect of vacuum.  相似文献   

10.
The effects of the combined treatment of drying and heat treatment using superheated steam (SHS) were studied relative to the changes of the major chemical components in larch wood. The green lumber was dried and heat-treated in SHS conditions of 250 °C and 0.5 MPa for 18 h, and the relative percentage contents of sugars, lignin, and extractives were investigated and compared with the relative percentage contents in the lumber heat-treated in hot air conditions of 250 °C and atmospheric pressure for 18 h. After both heat treatment methods, the relative percentage contents of xylan, mannan, galactan, and arabinan were greatly decreased, whereas that of the Klason lignin was increased, additionally that of glucan and extractives remained almost unchanged. Lignin may bind with furan compounds decomposed from hemicellulose following heat treatment, thus contributing to the increase in the apparent relative percentage contents of the Klason lignin. In addition, the condensate collected in the condenser after combined drying and heat treatment using SHS was investigated qualitatively and quantitatively by high-performance liquid chromatography (HPLC). A large amount of furfural and acetic acid decomposed from hemicellulose was detected and some sugar components composed of cellulose and hemicellulose were detected in the liquid condensate.  相似文献   

11.
The study investigated and compared the behaviour of four wood species, originating from Europe and China, in terms of temperature-induced artificial ageing. It was conducted at 100 °C for a total period of 288 h. Ageing effects were evaluated by colour measurements in the CIE Lab system and by FTIR analysis. Colour changes were then related to chemical changes in the wood. The investigated wood species were European ash (Fraxinus excelsior), European walnut (Juglans regia), Chinese ash (Fraxinus mandshurica) and Chinese walnut (Juglans mandshurica). Colour changes were maximum for European ash and minimum for Chinese ash, while European walnut and Chinese walnut evolved quite similarly. Main chemical changes due to temperature ageing were reduction of hydroxyl groups, increase of the unconjugated carbonyl groups and an apparent slight increase of lignin, more evident for European ash and delayed for European walnut. Formation of aromatic carbonyl conjugated groups as quinoid structures as a result of oxidative reactions was revealed especially for European ash. The different behaviour of the studied wood species may be explained by their different chemical composition, especially hemicelluloses, lignin and extractives content.  相似文献   

12.
This study focused on the distribution of wood components along a cross section of a spruce stem. Thin samples of earlywood and latewood were analysed by special micro-scale analytical techniques. Heartwood contained significantly more lignin and less cellulose than sapwood. The total content of hemicelluloses was the same along the radial direction, but the distribution of sugar units differed. The amounts of arabinoglucuronoxylan and pectins were larger in the heartwood. The transition zone between heartwood and sapwood had a specific composition, with less lignin and lipophilic extractives than heartwood and sapwood. For earlywood and latewood, significant differences were found in the distribution of sugar units in hemicelluloses. Latewood contained clearly more galactoglucomannan than earlywood, and conversely less pectins. The lipophilic extractives were also less concentrated in the latewood.Abbreviations EW or E earlywood - LW or L latewood - HW heartwood - SW sapwood - TZ transition zone wood - A.R. annual ring - AcBr Acetyl bromide - Ara arabinose - Xyl xylose - Gal galactose - Glc glucose - Man mannose - Rha rhamnose - GlcA glucuronic acid - MGlcA 4-O-methyl-glucuronic acid - GalA galacturonic acid - o.d. oven dry  相似文献   

13.
ABSTRACT

This paper describes the chemical composition of sapwood (SW) and heartwood (HW) of Pinus halepensis Mill stem. Extractives were first isolated by accelerated solvent extraction and then analysed by gas chromatography-mass spectrometry (GC-MS). The cellulosic polysaccharide content present in the pre-extracted wood samples was determined with acid hydrolysis and GC. The hemicelluloses content was determined with acid methanolysis and GC. Free monomers were additionally analysed by GC. The amount of lignin was determined gravimetrically by the Klason lignin method and the acid-soluble lignin was determined by a UV method. Formic and acetic acids in wood were determined after alkaline hydrolysis and analysed by HP-SEC. It was found that lipophilic and hydrophilic extractives were more abundant in heartwood (1.6% and 2.5%) than in sapwood (1.1% and 1.8%). Celluloses content was higher in sapwood (42.5%) than in heartwood (39.7%), whereas lignin, hemicelluloses and sugar monomer contents were more abundant in heartwood (28.9%, 26.8% and 0.3%) than in sapwood (28.0%, 24.5% and 0.2%). The variation in acetic and formic acids and ash contents between sapwood (0.7%, 0.2% and 0.5%) and heartwood (0.6%, 0.1% and 0.4%) was small. The acetylation degrees were found to be slightly similar in sapwood (0.4) and heartwood (0.3).  相似文献   

14.
对云南甜竹的9项化学组成进行分析,结果表明：云南甜竹的综纤维素、木素等细胞壁主要物质含量和一般木材接近,灰分和各种抽出物含量介于木材和草类原料之间 除综纤维素和灰分在秆高方向上表现出明显的递增分布规律外,云南甜竹其它各化学成分在秆高方向上未呈现出明显的分布规律。从化学组成角度分析认为,云南甜竹满足制浆造纸工业对原材料的要求,可以作为发展竹浆产业的原料竹种,值得在气候适宜的地区推广种植。  相似文献   

15.
陈山红心杉木材化学成分的研究   总被引：9，自引：2，他引：9  
对不同树龄陈山红心杉和江西省不同产地普通杉木的木材化学成分进行了测定和比较，，分析了红心杉木材化学成分的特点，结果表明，：红心杉的红色物质与木质素，1％NaOH抽提物和苯醇抽提物有关。  相似文献   

16.
The objective of this study is to determine the properties of G. amplexifolia. In this paper; the chemical composition, including holocellulose, acid-insoluble lignin, 1% NaOH solubility, benzene-ethanol extractives and ash content, was considered for the variability with respect to positions along bamboo culm height （bottom, middle and top）, parts along radial direction （inner part and outer part）and ages （1-year and 2- year）. The test results were also compared to those of moso that is commonly planted and used in China. This study indicated that both the holocellulosecontent and the lignin content in inner part were lower than ; in outer part, but for extractives and ash content, the reverse was true. Bamboo age also had effect on chemical composition; both the holocellulose content and the ash content in the culm of 1- year were higher than those of 2-year; while the lignin content and the extractive content m the culm of 1- year were higher than those of 2-year. High holocellulose content, low lignin contentand extractive content were advantages of G. amplexifolia.  相似文献   

17.
Abstract

To investigate the role of extractives on heat-induced discoloration of wood, samples of black locust (Robinia pseudoacacia) wood flour were extracted with various solvents prior to heat-treatment. Analysis of their color parameters and chromophoric structures showed that the chroma value of the unextracted sample decreased while that of the extracted sample increased after heat-treatment. Both samples showed broad diffuse reflectance UV-Vis (DRUV) absorption bands with maxima around 360–380 nm after heat-treatment due to the formation of conjugated double bonds, carbonyl functionalities, and quinoid structures. Compared with the unextracted sample, the dominant chromaticity of the extracted samples hypochromatically shifted and the peak became narrower. This result showed that extractives contribute mostly to the reduction in the light reflection on heat-treated wood. In addition to extractives, lignin and hemicellulose also contributed to the formation of color substances upon heat-treatment. The increase in C3/C2 ratio in X-ray photoelectron spectroscopy (XPS) spectra signified the oxidation reactions in the heating process. The increase in O1/O2 for extracted sample after heat-treatment and changes in DRUV and Fourier transform infrared spectroscopy (FTIR) spectra support the hypothesis that discoloration can also arise from the degradation of hemicellulose and the condensation reactions of lignin.  相似文献   

18.
不同结晶指数纤维素的X射线光电子能谱分析   总被引：1，自引：1，他引：0  
以离子液体处理纤维素得到不同结晶指数(Icr)的纤维素样品。对所得样品首次采用X射线光电子能谱(XPS)的C1 s能谱图与O1 s能谱图,来分析不同结晶指数纤维素分子的化学状态。结合纤维素固体核磁共振(CP/MAS13C NMR)的分析结果可知,纤维素的C2峰及O1 s1峰与纤维素大分子中的氢键关系密切,其峰面积相对含量与纤维素的Icr值呈现高度相关性,相关系数分别为r10.9992和r20.9679。  相似文献   

19.
《Southern Forests》2013,75(3):215-220
The infection and association between the wood wasp Sirex noctilio and the fungus Amylostereum areolatum is responsible for large-scale tree mortality in the Midlands of the KwaZulu-Natal province in South Africa. An exploratory investigation on the effect of the infestation of trees by the wood wasp and its associated fungus on the chemical composition of Pinus patula pulpwood was undertaken. Various tree classes representing different levels of physiological growth stress from this infestation were compared. Together with the above stress agents, fire damage to P. patula trees was also considered as a possible cause of changes in pulpwood chemical composition. Chemical analyses to determine the Seifert cellulose and Klason lignin contents as well as the levels of water- and solvent-soluble extractives were conducted using published Tappi standard methods. The results indicated only negligible differences between infestation levels (tree classes) with respect to Seifert cellulose and Klason lignin contents. In contrast, highly significant differences were observed for solvent- and water-borne extractives. It is evident from the results that P. patula trees engage a defence strategy to counter the effects of the infestation and the resulting physiological stress. The results of the chemical analyses suggest that trees should not be harvested any younger than the intended rotation age of 12 years and at the time of harvesting all the biomass, including the infected wood, should be sent to the pulp mill. Fire-damaged trees can be utilised in the same way as healthy trees when applying the TMP process provided the charcoal on the outer bark is removed. The usefulness of a biplot to simultaneously display the various tree classes and their chemical composition is illustrated.  相似文献   

20.
ABSTRACT

In the present work, Eucalyptus nitens was thermally modified in an open (atmospheric pressure) and a closed (under pressure) reactor system. The effect of the changes of the chemical composition on the mechanical properties was investigated. Hemicelluloses, cellulose, lignin, extractives, acetic acid, formic acid, total phenols and the cellulose degree of polymerization (DP) as well as modulus of elasticity (MOE) and modulus of rupture (MOR) were measured for each modification. The results indicated that the closed system modification, particularly at high pressure, presented stronger variations on the chemical structure of the modified wood than the modifications in the open system. In both modifications, MOR showed a better correlation with the chemical changes than the MOE, especially xylose, cellulose DP, lignin and total phenols. These correlations suggest a tendency of a more brittle wood in the closed system modification at high pressure than in the modifications in the open system. Results can be used as a reference for future applications of thermally modified E. nitens wood.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号