首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 62 毫秒
1.
As a continuing study of six organic solventsoluble lipophilic extractives and one water-soluble lipophilic extract from wheat straw, seven extracts were further compared using Fourier transform-infrared (FT-IR) analysis,1H and13C nuclear magnetic resonance (NMR) spectroscopy, and thermal analysis. In the FT-IR spectra of two-thirds chloroform/one-third methanol, methyltertbutyl ether (MTBE), hexane, petroleum ether, and dichloromethane extracts, a strong band at 1746cm–1 is indicative of the ester carbonyl of triglycerides or steryl esters or waxes, whereas the occurrence of carboxylic carbonyl of free fatty acids or resin acids at 1712–1719 cm–1 is verified in the spectra of two-thirds toluene/one-third ethanol and hot water extracts. Signals at 187.9,178.4, and 173.3 ppm in the13C NMR spectrum of MTBE extract correspond to carbonyl groups of resin acids, fatty acids, and fatty acid/steryl esters, respectively. All the extractives were to varying degrees thermally unstable at a temperature of about 200°C, and the melting temperature occurred at about 54°C.  相似文献   

2.
Abstract The chemical compositions of lipophilic fractions from Eucalyptus urograndis and Eucalyptus urophylla cultivated in Brazil and Eucalyptus camaldulensis from Mexico were determined by gas chromatography-mass spectrometry (GC-MS) before and after alkaline hydrolysis followed by derivatization. In all fractions, fatty acids (including small amounts of α-and ω-hydroxy fatty acids) and sterols were the most abundant components followed by smaller amounts of long-chain aliphatic alcohols, phenolic acids, and hydrocarbons. The presence of steroid esters and triacylglycerols in all three species was indirectly confirmed by the increased amount of fatty acids and sterols (manly β-sitosterol) in the hydrolyzed fractions compared with the corresponding nonhydrolyzed fractions. The amount of liphophilic compounds (mainly fatty acids and sterols) identified in hydrolyzed fractions of E. urograndis, E. camaldulensis, and E. urophylla corresponded to 1921, 1915, and 634 mg kg−1 of dry matter, respectively. The lower abundance of fatty acids and sterols in the fractions from E. urophylla indicates that problems related to pitch formation will be less severe for this species than for the other two.  相似文献   

3.
Pinus pinaster wood samples, obtained at different positions of three healthy trees, were subjected to two sequential extractions using an Accelerated Solvent Extraction instrument. The first extraction was carried out with hexane (to remove lipophilic extractives) and the second one with acetone/water (95:5 v/v) to recover bioactive phenolic compounds, the target compounds of this study. The extracted fractions were assayed for total yield and composition. The extracts contained a spectrum of phenolic compounds (simple phenolics, phenolic stilbenes, flavonoids and lignans) and non-phenolic components (juvabiones, resin and fatty acids, steryl esters and triglycerides). The fractionation effects achieved by consecutive extractions and the recovery of bioactive phenolics are discussed.  相似文献   

4.
Summary The chemical composition of waxes was studied in cork planks from three different trees of Spanish Quercus suber at four different stages of the in‐dustrial processing of the first transformation: stripping, first rest, boiling fol‐lowed by open air rest and boiling followed by store-room rest. Waxes were extracted with chloroform (CHCl3) and the extract was submitted to saponification in order to obtain the neutral and acid fractions. The trimethylsilyl derivatives of both fractions were analysed by GC-MS. An important decrease of the total content of waxes -CHCl3 extract-(average values: 10.13 to 4.91%) and of the acid fraction (average values: 2.51 to 0.96%) was observed throughout the industrial processing. Some differences were also found among trees, two of them being richer in total waxes (average, 8.14 and 7.71%) than the other one (average, 4.67%). Concerning the three groups of identified components (fatty acids, fatty alcohols and triterpenes), the contents of the fatty alcohols and acids suffer an important reduction during the first rest (average values: 30.39 to 17.53% and 58.73 to 31.48%, respectively), while after boiling, there is a decrease of the triterpenes concentrations (79.16 to 58.00% -neutral fraction- and 40.23 to 23.20% -acid fraction-), being greater when the second rest is carried out in a store room. Significant differences among trees were only found in the fatty alcohols contents. The neutral fraction was mainly composed by fatty alcohols (all the even members from C18 to C26, with traces of intermediate odd members and some unsaturated groups, C20 and C21) and triterpenes (14 components, among them friedelin, betulin and cerin were identified), and a very small amount of monocarboxylic fatty acids (C16, C18, C22 and C24 members) was also present. The main group of components of the acid fraction was that of fatty acids (saturated even C12–C24 and odd C15, C17, C21 members, accompanied by a great amount of unsaturated terms and some ω-hydroxyacids, 18-hydroxy-9,12-octadecadienoic and 18-hydroxy-9-octadecenoic acids). Four triterpenes, the C20, C24 and C28 alcohols and ferulic acid were also detected in the acid fraction. Some of these individual components of each fraction were also affected by the industrial processing and presented significant differences among the studied trees. Received 12 December 1997  相似文献   

5.
We investigated the impact of residual extractives on lignin determination by lignin content difference between unextracted and extracted pulps, residual extractives analysis, and lignin content contribution from model extractive compounds. There were two different kinds of extractives in aspen kraft pulp. The extractives impacting on kappa number determination were well removed in oxygen delignification; these were mainly unsaturated fatty acids. However, the extractives impacting on Klason lignin determination were largely resistant to oxygen delignification; these were mainly saturated fatty acids, sterols, and hydrocarbons. Oxidation of unsaturated fatty acids was the main reaction in oxygen delignification. These trends were confirmed by simulation of lignin content determination with three model extractive compounds (β-sitosterol, linoleic acid, and palmitic acid). The publication of this article was made possible by an Emachu Research Fund. The authors are grateful for the fund.  相似文献   

6.
There is a general pattern of resin chemistry for parenchyma cells and secretory tissue. In sapwood the parenchyma resin is composed of fats, steryl esters, and occasionally waxes. Secretory tissue (most often resin canals) contains terpenes, terpenoids, and polyisoprenes. Other types of canal resin occur in a few hardwood families. The pattern is valid for softwoods and hardwoods. It has been defined from a comparison of available information on wood chemistry, wood anatomy, and the chemistry of oleoresin exudates from trees. This is a short overview with the most important references of two detailed reports.  相似文献   

7.
Santalum album is known as East Indian sandalwood. It is the most economically important tree harvested for heartwood oil, and India is among the chief exporters of sandalwood and its products. Multiple shoots were induced from nodal shoot segments derived from a 50- to 60-year-old candidate plus tree (CPT) on Murashige and Skoog (MS) medium supplemented with 0.53 μM α-naphthaleneacetic acid (NAA) and 11.09 μM 6-benzylaminopurine (BA). In vitro differentiated shoots were multiplied on MS medium with 0.53 μM NAA, 4.44 μM BA, and additives: 283.93 μM ascorbic acid, 118.10 μM citric acid, 104.04 μM cystine, 342.24 μM glutamine, and 10% (v/v) coconut milk. New shoots were harvested repeatedly for up to three subculture passages on fresh medium at 4-week intervals. Microshoots treated with 98.4 μM indole-3-butyric acid (IBA) for 48 h produced roots on growth-regulator-free, quarter-strength MS basal salts medium with vitamin B5 and 2% sucrose. In vitro root induction was achieved from microshoots pulsed with 1230 μM IBA for 30 min in soilrite rooting medium. The percentage of rooting in soilrite was higher than that for agar medium, and in vitro raised plants were established in the field and showed normal growth.  相似文献   

8.
Scots pine battens were heat-treated at 100–240º C under saturated steam. Cross-sections of heat-treated battens were analysed using ATR and reflection FTIR microscopies. A typical absorption band of fats and waxes at 1740 cm-1 was detected on the sapwood edges in the temperature range of 100–160º C, indicating that fats and waxes moved along the axial parenchyma cells to the surface of the sapwood during the heat treatment. At the elevated temperatures (above 180° C) fats and waxes disappeared from the sapwood surface and were no longer detected with FTIR spectroscopy. Resin acids were detected at temperatures between 100 and 180º C in the middle of the battens. IR spectra of these spots showed a characteristic absorption band of resin acids at 1697 cm-1. At 200º C resin acids were not detected in the middle of the battens; however, resin acids were detected at distances of 500 and 600 mm from the midpoint of the battens and on the edges of battens. At temperatures above 200° C, resin acids had disappeared from the wood.  相似文献   

9.
An in vitro clonal propagation procedure for mature Tectona grandis (teak) trees is described. Multiple shoots were induced from nodal segments through axillary bud proliferation. A shoot multiplication rate of 6.33 was achieved on Murashige and Skoog's (MS) medium supplemented with 10 μM 6-benzyladenine BA and 1 μM 1-naphthalene acetic acid (NAA) during every subculture cycle of 4 weeks. In vitro raised shoots could be successfully rooted (66.66%) on liquid MS medium supplemented with 15 μM NAA, with 1.60 roots per shoot, every 6 weeks of culture. In vitro hardening was carried out in sand soaked with half-strength MS medium (organic free). The plantlets were acclimatized first in a mist chamber and then in polybags in a mixture of soil, sand, and farmyard manure (1 : 1 : 1 v/v) in a shade house.  相似文献   

10.
Synthesis of insecticidal sucrose esters   总被引：1，自引：0，他引：1  
1 Introduction Sucrose fatty acid esters are nontoxic compounds that may be produced from renewable, economical and readily available resources. Free alcoholic hydroxyl groups of sucrose react with aliphatic or aromatic ac- ids to produce sucrose esters. Sucrose esters (SE) have been commercially produced for the food industry, which are widely used in foods, cosmetics, agriculture and pharmaceuticals. Apart from their emulsifing properties, they are completely biodegradable, harm- less to th…  相似文献   

11.
Summary The chemical composition of waxes was studied in Quercus suber cork planks collected in seven localities of the three main production areas of Spain. Waxes were extracted with chloroform (CHCl3) and the extract was submitted to saponification in order to obtain the neutral and acid fractions. The trimethylsilyl derivatives of both fractions were analysed by GC-MS. The seven populations cannot be distinguished by their total contents of waxes (Chloroform extract) and of the neutral and acid fraction. This lack of differences could be due to the important variability among samples of each population. The neutral fraction was mainly composed of fatty alcohols (all the even members from C18 to C26, with traces of the intermediate odd members and some unsaturated groups) and triterpenes (11 components, among them friedelin, betulin and cerin were identified) and a very small amount of monocarboxylic fatty acids (C16 and C24 members) was also present. The main group of components of the acid fraction was that of fatty acids (saturated even C14–C24 and odd C15, C17, C21 members, accompanied by a great amount of unsaturated terms and some ω-hydroxyacids, 18-hydroxy-9,12-octadecadienoic and 18-hydroxy-9-octadecenoic acids). Four triterpenes and the C20 and C24 alcohols were also detected in the acid fraction. Significant differences were found among the corks of the various provenances in the global contents of alcohols and triterpenes and in these individual components contents of the neutral fraction. Concerning the differences among the various provenances in the contents of the groups of fatty acids, alcohols, and triterpenes in the acid fraction, a higher number of differences were obtained in the comparisons of the contents of acids and triterpenes, whereas the differences were practically null in the case of the alcohols. When the differences were studied considering the individual compounds, the relation with the behaviour of the contents of the groups of components was not as clear as it happens in the neutral fraction. In this case, the differences were scarcer and they did not show a unique pattern, neither in the components, nor the populations. There is no correspondence in the differences among the provenances regarding the components of the neutral fraction or those of the acid fraction. No clear relationship was found between the geographical proximity of the provenances and chemical similarity of the waxes composition. Received 12 December 1997  相似文献   

12.
In vitro clonal multiplication of Pterocarpus santalinus L. was achieved using mature nodal explants of a 10-year-old elite quality tree. Combinations of serial transfer technique and incorporation of antioxidants (250 mg/l L-ascorbic acid and 50 mg/l citric acid) into the culture medium helped to minimize medium browning and improve explant survival during shoot sprouting. About 70% of explants were sprouted on Murashige and Skoog (MS) liquid medium containing 4.4 μM 6-benzyladenine (BA). The explant harvest period also influenced the bud break and shoot sprouting in nodal explants. The combination of 4.4 μM BA and 2.2 μM thidiazuron (TDZ) was found to be the most suitable growth regulator for obtaining the highest percentage of nodal segment sprouting (74%–75%), the number of secondary shoots per primary shoot (two or three), the shoot length (5–6 cm), the number of new nodal segments generated per active explant (four or five), and the multiplication coefficient (3.5) within 6 weeks. Repeated subculturing of nodal explants obtained from shoot cultures enabled continuous production of healthy axillary shoots. At the end of the sixth passage, about 90% of nodal explants produced five or six healthy green shoots, each being about 6.6 cm long with six or seven nodes. Multiplication coefficient was also increased from the first subculture (5.4) to the sixth subculture (8.3). The best rooting response was achieved on solidified half-strength MS medium supplemented with 4.9 μM indole-3-butyric acid (IBA). About 70% of the micropropagated plantlets were established successfully in 20-cm pots containing a mixture of soil and farmyard manure (4 : 1 ratio) and formed new leaflets.  相似文献   

13.
 Spruce wood specimens were acetylated with acetic anhydride (AA) solutions of glucose pentaacetate (GPA), and their viscoelastic properties along the radial direction were compared to those of the untreated and the normally acetylated specimens at various relative humidities and temperatures. Higher concentrations of the GPA/AA solution resulted in more swelling of wood when GPA was introducted into the wood cell wall. At room temperature the dynamic Young's modulus (E′) of the acetylated wood was enhanced by 10% with the introduction of GPA, whereas its mechanical loss tangent (tan δ) remained almost unchanged. These changes were interpreted to be an antiplasticizing effect of the bulky GPA molecules in the wood cell wall. On heating in the absence of moisture, the GPA-acetylated wood exhibited a marked drop in E′ and a clear tan δ peak above 150°C, whereas the E′ and tan δ of the untreated wood were relatively stable up to 200°C. The tan δ peak of the GPA-acetylated wood shifted to lower temperatures with increasing GPA content, and there was no tan δ peak due to the melting of GPA itself. Thus the marked thermal softening of the GPA-acetylated wood was attributed to the softening of wood components plasticized with GPA. Received: March 29, 2002 / Accepted: May 21, 2002 Correspondence to:E. Obataya  相似文献   

14.
In order to obtain the effects of acid catalysts on wood liquefaction in phenol, we investigated the liquefaction of wood powder from Chinese fir (Cunninghamia lanceolata) and poplar (Triploid Populus tomentosa Carr) in the presence of phenol with the following weak inorganic acids as catalysts: phosphoric acid (85%), sulfuric acid (36%), hydrochloric acid (37%) and oxalic acid (99.5%). Results show that phosphoric acid (85%) and sulfuric acid (36%) are better than the other catalysts. It was found that lower residue ratios can be obtained under defined reaction conditions: phenol/wood ratio is 4, a 10% catalyst based on the weight of phenol, a temperature of 150°C for 2 h and phosphoric or sulfuric acid. The residue ratios are 3.2% and 4.0%, respectively. __________ Translated from Journal of Beijing Forestry University, 2004, 26(5) [译自: 北京林业大学学报, 2004, 26(5)]  相似文献   

15.
We analyzed the composition and studied the bioactivity of secretion from the poplar sawfly, Stauronematus compressicornis (Fabricius). A leaf-sandwich method was applied to test the bioactivity of the secretion. Coomassie brilliant blue, gas chroma-tography (GC) and other methods were used to analyze and carry out protein assays, amino acid analyses, fatty acid and cholesterol detection of the secretion. Results show that the secretion had a significant antifeeding effect on 4th instar larvae of the armyworm (Pseudaletia separata Walker). Dissolved in 0.27 mol·L–1 HCl, 0.1 mol·L–1 NaOH and 0.05 mol·L–1 Na2HPO4 separately, the secre-tions had antifeeding rates ranging from 22.7% to 49.6%. Meanwhile, the weights of the secretion-treated insects were significantly lower than those of the control. Biochemical detection showed that the proteins contained in the secretion were composed of 16 amino acids. The secretion also contained small amounts of cholesterol and fatty acids, which included lauric acid, myristic acid, myristoleic acid, seventeen carbonic acids and oleic acid.  相似文献   

16.
Coremia formation by Ceratocystis ulmi (Buis.) ist triggered by certain terpenes and unsaturated fatty acids, of which linoleic acid and its esters are the most active.  相似文献   

17.
A discolouration that appeared on the surfaces of a European white birch (Betula pubescens) board during vacuum drying was studied by means of colour measurements (CIEL*a*b*), elemental analysis and the analysis of extractives. The discoloured surface layer of the dried board contained substantially more methanol-soluble extractives than did the light-coloured part (50.7 mg g−1 vs. 26.7 mg g−1 dry wood), and the colour difference (ΔE* ab 20.0) between the two extracts was notable. Characterization by means of GC and 13C NMR spectroscopy showed that the extracts contain sugars (mainly glucose and fructose), low-molecular-weight phenolic compounds, proanthocyanidins, Brauns’ lignin and fatty acid esters. Concentrations of sugars, low-molecular-weight phenols, proanthocyanidins and Brauns’ lignin were higher in the discoloured surface layer than in the light-coloured part. The yellowness of the surface layer was associated with the accumulation of low-molecular-weight phenolic extractives, and the redness with Brauns’ lignin and possibly proanthocyanidins.  相似文献   

18.
Delignified hinoki wood and cellulose as well as hinoki and lauan woods were carbonized at 590°C for 1 h. The dielectric properties of these specimens were measured at 20°C in a frequency range of 20 Hz to 1 MHz. Inflection points in the dielectric constant (ε′) versus the logarithm of frequency (log f) curves as well as in the logarithm of the electric conductivity (log σ) versus log f curves for all specimens prepared were recognized. Peaks in the dielectric loss and the imaginary part of the complex conductivity versus the log f curves were detected in the frequency location corresponding to the inflection point in the ε′ and log σ versus log f curves. It was considered that this relaxation was responsible for the interfacial polarization observed in heterogeneous materials because no permanent dipoles existed in the specimens carbonized above 500°C. The Cole–Cole circular arc law was applied to account for this relaxation. Similar average relaxation times were obtained for all specimens. These results suggested that the observed relaxation was ascribed to interfacial polarization at microscopic levels in the cell walls.  相似文献   

19.
Eucalyptus globulus wood was subjected first to HCl–catalysed delignification with 70% acetic acid under conditions realizing an incomplete 3 × 3 × 3 factorial design (HCl concentration 0, 0.025 or 0.05%; temperature 120, 140 or 160 °C; reaction time 1, 2.5 or 4 h), and then to enzymatic hydrolysis. The hydrolysis kinetics conformed to both Ghose's empirical model and a biexponential equation. The biexponential fit implies the presence of both readily and reluctantly hydrolysed cellulose fractions, and the fitted coefficients show hydrolysis yield to depend largely on the digestibility of the latter. Multiple regression of performance variables on pulping conditions showed that neither the rate nor the extent of hydrolysis is greatest for pulps with minimum lignin or xylose contents; we attribute this circumstance to the condensation and precipitation of lignin under severe pulping conditions, which protects the cellulose of the pulp from enzymatic attack. Received 20 June 1998  相似文献   

20.
An intumescent waterborne amino-resin fire-retardant coating for wood (C) was synthesized and its fire-retardant and smoke-suppressant properties were investigated. The main film-builder of C was urea-formaldehyde resin blended with polyvinyl acetate resin. The intumescent fire-retardant system of C consisted of guanylurea phosphate (GUP), ammonium polyphosphate (APP), pentaerythritol (PER) and melamine (MEL). Specimens of plywood painted, respectively, with a commercial intumescent fire-retardant coating (A), a synthesized coating (C), and the main film-builder of coating C (B), as well as an unpainted plywood (S-JHB), were analyzed by cone calorimetry (CONE). The results show a marked decrease in the heat release rate (HRR) and the total heat release (THR), an increased mass of residual char (Mass), a marked postponement in time to ignition (TTI) and a reduced carbon monoxide production rate (P CO). The smoke production rate (SPR) and total smoke production (TSP) of the plywood painted with coating C were observed with the CONE test. The overall fire-retardant and smoke-suppressant performance of the synthesized coating C was much better than that of the commercial coating A. The thermo-gravimetric analysis (TGA) results of coating C and its film-builder B indicated that the thermal degradation process of B was slowed down by the addition of the intumescent fire-retardant system; the increase in the amount of charring of coating C was considerable. __________ Translated from Scientia Silvae Sinicae, 2007, 43(12): 117–121 [译自: 林业科学]  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号