首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 578 毫秒
1.
Wood from Norway spruce (Picea abies L. Karst.) is biologicallydegraded in exposed conditions. It also has anatomical featuresthat make it difficult to impregnate with preservatives by currentlyavailable industrial processes. In the study reported here,we used the new Linotech process to impregnate Norway sprucewood with hydrophobic linseed oil and then quantified its uptakeand dispersal in anatomically distinct wood tissues. We alsoinvestigated the effects of the wood moisture content on theresults of the impregnation. Samples (500 x 25 x 25 mm) weretaken from 15 trees in a coniferous forest in northern Sweden(64° 10' N, 160–320 m a.s.l.). The parameters forthe Linotech process were 2–3 h treatment time at 0.8–1.4MPa and 60–140°C. To determine the level of uptake,the linseed oil was extracted from the impregnated wood usingmethyl-tertiary-butyl-ether. The uptake was quantitatively analysedby comparing X-ray microdensitometry values obtained followingimpregnation both before and after oil removal. In earlywood,initial moisture content had an obvious effect on the impregnationresult. Six times more oil was taken up when the moisture contentwas greater than ~150 per cent than when it was less than 30per cent. Theoretical calculations, based on density levels,suggest that the water-filled porosity of the wood (water volumedivided by porosity volume) was positively correlated with thelinseed oil uptake, and more strongly correlated in earlywoodthan in latewood. There were also significant differences inuptake between different wood tissues; heartwood/mature woodand heartwood/juvenile wood showed 10–20 per cent weightincreases due to linseed oil uptake, compared with 30–50per cent in sapwood/mature wood. Examination by scanning electronmicroscopy confirmed these uptake patterns. The moisture contentafter impregnation was about 5 per cent, irrespective of theLinotech process parameters, tissue type and initial moisturecontent. In conclusion, the impregnation process used here resultsin high levels of well-dispersed linseed oil uptake and shouldfacilitate drying.  相似文献   

2.
Abstract

Untreated Scots pine (Pinus sylvestris) and Norway spruce (Picea abies) samples were exposed above ground in a durability test for 6 years. The samples consisted of three pieces of wood, 22×95×500 mm, screwed together; two pieces lengthwise with a third piece overlapping. Weight was measured, to calculate moisture content (MC), and samples checked regularly for cracks and fungal growth. Parameters investigated were heartwood/sapwood (pine), annual ring orientation (spruce), stand site, annual ring width and density. Stand site, annual ring width and density had no influence on MC or fungal growth for either pine or spruce. Spruce samples with vertical annual rings had fewer cracks than samples with horizontal annual rings. Pine sapwood samples had a high MC and a large amount of rot fungi, while heartwood had a lower MC and no rot. Most spruce samples were similar to pine heartwood, except from a few samples that had high MC and fungal growth. Those were all sawn from the outer part of the log. Therefore, it can be stated that spruce sawn from the inner part has almost the same properties as pine heartwood, while spruce from the outer part of the log has similar properties to pine sapwood.  相似文献   

3.
Abstract

Eighteen sapwood and 18 heartwood samples from three Scots pine (Pinus sylvestris L.) trees were used to identify correlations between the features of their near-infrared spectra (400–2500 nm) measured before and after impregnation with linseed oil (Linogard®) and (1) the amount of oil taken up by the samples at three different longitudinal positions; and (2) the tissue type of sample. Calibration models were cross-validated and oil uptake models were also validated on separate test sets. Partial least squares regression models for the prediction of uptake and tissue type in non-impregnated wood were promisingly accurate, having coefficients of multiple determination (Q 2) values of > 0.8, 0.8 and 0.75 for predictions of tissue type, oil taken up as a percentage of sample mass and total mass of oil taken up, respectively. The models developed for linseed oil-impregnated samples were better still, generating Q 2 values of > 0.9, > 0.8 and 0.8 for the three key properties. In general, models based on spectra acquired along two directions of measurement (longitudinal and tangential) were more accurate than models based on only one. Tandem models consisting of two submodels, one for sapwood and one for heartwood, were more successful than single models applicable to both tissue types.  相似文献   

4.
Pine sapwood (Pinus sylvestris) was impregnated with linseed oil to three levels of uptake. The distribution of the penetrant was found by taking microdensity measurements of an impregnated sample and then using an ethanol extraction procedure to remove the linseed oil. A second set of X-ray measurements at identical locations in the same sample allowed the linseed oil to be indirectly mapped. An uneven distribution of linseed oil in the specimens with the lowest uptake (25% increase in weight) was seen as sharp gradients in the densitometry curves. With increased filling by the linseed oil, these gradients were gradually smoothed. Microstructural changes in specimens with high uptake were revealed using scanning electron microscopy. Through a combination of X-ray microdensitometry investigation and changes observed in the wood's mechanical properties and morphology, it was concluded that liquid flow during impregnation results in significant damage to the cell structure.  相似文献   

5.
采用高频真空干燥、常规窑干和高温干燥3种方法对杉木人工林木材的心、边板材进行干燥处理,用毛细管上升法评价干燥后试样的浸注性能,用半薄切片法测定干燥试样具缘纹孔的闭塞率,最后用扫描电子显微镜观察干燥试样微观构造的变化,比较分析3种干燥方法对杉木人工林木材浸注性的影响机理.结果表明:对于杉木边材,经高频真空干燥后试样的浸注性显著高于常规干燥和高温干燥后试样的浸注性,后2种干燥方法对试样浸注性影响的差异并不显著;对于杉木心材,高频真空干燥与高温干燥后试样的浸注性存在显著差异,而高频真空干燥与常规干燥之间、高温干燥与常规干燥之间对试样浸注性的影响差异均不显著;3种干燥方法处理后,杉木边材的浸注性均显著高于心材的浸注性;具缘纹孔的闭塞率较低以及部分具缘纹孔周缘破裂是高频真空干燥后木材浸注性提高的主要原因.  相似文献   

6.
Abstract

The moisture sorption and swelling of spruce specimens impregnated with linseed oil and unimpregnated controls were studied in two sorption experiments: from 0 to 55% relative humidity (RH) and from 55% RH to water saturation. Sorption isotherms were also determined using a sorption balance. The impregnated specimens had lower rates of both moisture sorption and swelling than the unimpregnated controls; however, there was no significant difference in final moisture contents. In addition, the linseed oil impregnation did not improve the dimensional stability of the wood; in most cases the specimens impregnated with linseed oil swelled more than the unimpregnated controls. For the impregnated specimens, reductions in swelling rates were in most cases seen without corresponding reductions in final swelling. The moisture sorption rate was reduced for the impregnated specimens but there were generally no reductions in equilibrium moisture content.  相似文献   

7.
Samples of pine (Pinus sylvestris) and spruce (Picea abies) were impregnated with a low-viscous epoxy resin using a vacuum process. The epoxy was cured in situ and the specimens sectioned. Deposits of the cured epoxy was then observed in the wood cavities using a scanning electron microscope. The investigation concentrated on tracing the transverse movements of a viscous liquid in the wood, and special attention was therefore given to the cross-field area between ray cells and longitudinal tracheids. A damage hypothesis is proposed based on the results obtained in the present investigation in combination with those from earlier studies on linseed oil-impregnated pine: In addition to the morphology of the bordered pits, viscous liquid flow in wood is dependent on damage that occurs during the impregnation procedure. For pine sapwood, liquid flow is enabled through disrupted window pit membranes, which divide the longitudinal tracheids and the ray parenchyma cells. A mechanism accounting for the reduced permeability of pine heartwood is believed to be deposits of higher-molecular-weight substances (extractives) in the ray parenchyma cells and on the cell walls. In spruce the thicker ray cells in combination with the smaller pits, which are connected to the longitudinal tracheids, reduce permeability considerably.  相似文献   

8.
A combined effect of steaming and heat treatment was imposed on green Turkey oak wood, both for sapwood and heartwood. Steaming was carried out in an autoclave at 100–120–130°C whereas heating was carried out in an oven for 2?h at 120–180°C. Equilibrium moisture content at dry, intermediate and moist state both in desorption and adsorption, swelling, cup, twist, color change, and spectral reflectance measures were registered. Swelling and water absorption decreased due to the hydro-thermal treatment. During adsorption, heartwood showed a higher hygroscopic inertia compared to sapwood and this difference increased with temperature. Cup increased with temperature in the steaming process. Twist seemed to be affected more by quality of original trunks than treatments. The wood color was more sensitive at a steaming temperature of 130°C combined with heat treatment at 180°C. Transitional treatments assured more reliable results on homogenization of hue between sapwood and heartwood.  相似文献   

9.
Abstract

Mechanical properties are very important in structural uses of wood. In the case of larch wood, shear strength (SS) may be a limiting property, because the wood is brittle and it splinters easily. In this study, SS of Siberian larch (Larix sibirica) wood was studied in relation to its axial and radial location and to some other wood properties in the part of the trunk that produces logs of good carpentry quality. SS increased by 21–23% from the pith to the outer heartwood at each studied height (butt, 4.5 and 9 m), and it was at its most approximately 7% higher at the butt than at the other studied heights. The main reason for the radial increase in SS was the increase in density caused by wood maturation, but other factors also affected SS, depending on the grouping mode (combined material, radial/axial location). An exception was sapwood, for which no factors affecting SS could be identified. Thus, sapwood may behave differently from heartwood regarding use, even unexpectedly. The results suggest that mature heartwood, but not juvenile wood and sapwood, of Larix sibirica should primarily be used in products that require high SS.  相似文献   

10.
This work introduces, for the first time worldwide, undeinked recycled old newsprint as a new resource of electrical purposes paper. Impregnation of undeinked recycled old newsprint paper with linseed oil enhances the breaking length of paper and remarkably improves its electrical properties, i.e., the dielectric constant increases greatly and the a.c. conductivity decreases significantly due to impregnation. It was found that the electrical properties of the undeinked old newsprint paper and its linseed oil impregnated counterpart are close to the electrical properties of paper made from the more expensive virgin wood pulps and their linseed oil impregnated counterparts. Using the undeinked pulp is more privileged than using the deinked pulp; because eliminating the deinking step saves money, time, and reagents. In addition, eliminating the deinking step improved the breaking length of paper. Electron dispersive X-ray elemental analysis (EDX) was used to investigate the undeinked and deinked pulps for residual elements originating from the printing materials. EDX was correlated to the slight differences in electrical properties of paper made from undeinked and deinked pulps. However, impregnation was able to overcome these slight differences. It was shown that improvement in electrical properties, due to impregnation, is sustained at elevated temperatures.  相似文献   

11.
To utilize forest resources in areas affected by fallout from the Fukushima Daiichi Nuclear Power Plant accident, it is important to understand the mechanisms of 137Cs movement through the stem wood of contaminated trees. Understanding the mechanism of absorption and migration of 137Cs to stem wood is necessary for clues to the future prediction of the transition of 137Cs to xylem. In the present study, radial variations in 137Cs concentration were investigated in Japanese cedar (Cryptomeria japonica D. Don) trees collected 1 year and 10 months after the accident. Additionally, the relationship between 137Cs concentration and potassium (K) content was established. Trees with a higher moisture content and lower lightness value in heartwood tended to have a higher 137Cs concentration in the heartwood. In these trees, 137Cs concentration peaked at the heartwood–sapwood boundary and gradually decreased toward the pith. By contrast, K content within the heartwood remained nearly constant along the radial direction. The heartwood-to-sapwood ratio of 137Cs concentration was significantly positively correlated with that of K content. Based on these results, we suggest that 137Cs movement from sapwood to heartwood might be related to the K content ratio of heartwood and sapwood.  相似文献   

12.
The effect of cross-sectional dimensions on bow and surface checking were investigated, using the boxed-heart square timber of two sugi cultivars with dimensions 80, 120, and 140 mm and length 1.9 m taken at two different heights above the ground. The smaller cross-sectional timber tended to have larger bow, less surface checking, and larger dimensional shrinkage. However, the drying defects were different between the cultivars and sampling heights, depending on the shrinkage properties of the juvenile wood and the heartwood proportion in the core part of the stem. The bow was larger in the smaller cross-sectional timber in which the longitudinal shrinkage was large in the juvenile wood. Surface checking was more prominent in larger cross-sectional timber containing sapwood in its outer part, which suggested the surface checking was induced by drying stress, owing to large moisture gradients between the heartwood and sapwood. The cross-dimensional shrinkage of the timber was larger in timber with larger tangential shrinkage.  相似文献   

13.
Wood modification, of which thermal modification is one of the best-known methods, offers possible improvement in wood properties without imposing undue strain on the environment. This study investigates improvement of the properties of heat-treated solid wood. Scots pine (Pinus sylvestris) was modified in two stages: impregnation with modifiers followed by heat treatment at different temperatures. The impregnation was done with water glass, melamine, silicone, and tall oil. The heat treatment was performed at the temperatures of 180°C and 212°C for three hours. The modified samples were analyzed using performance indicators and scanning electron microscope micrographs. The mechanical and physical properties were determined with water absorption, swelling, bending strength, and impact strength tests. All the modifiers penetrated better into sapwood than hardwood; however, there were significant differences in the impregnation behavior of the modifiers. As regards the effect of heat treatment, generally the moisture properties were improved and mechanical strengths impaired with increasing treatment temperature. In contrast to previous studies, the bending strength increased after melamine impregnation and mild heat treatment. It is concluded that the properties of impregnated wood can be enhanced by moderate heat treatment.  相似文献   

14.
The effects of temperature and moisture content on selected mechanical properties associated with the chipping process were evaluated. In chipping, mechanical properties such as shear parallel to the grain, cleavage, and bending are involved. Matched samples of heartwood and sapwood were obtained from freshly harvested logs of black spruce and balsam fir to determine the variation of the studied mechanical properties between ?30 and 20 °C, at intervals of 10 °C. Moisture content (MC), basic density (BD), and annual ring width (RW) were measured for each sample. For both wood species, temperature had a significant effect on all mechanical properties under freezing conditions (below 0 °C). This effect was more important for sapwood than for heartwood, which was explained by the difference in MC between these two types of wood. Between 0 and 20 °C, temperature and type of wood did not show any significant effect on the mechanical properties. Multiple regression models were obtained to predict the mechanical properties. These regressions showed that MC was the most important factor to explain the mechanical properties below 0 °C. However, for temperatures of 0 °C and higher, BD was the principal factor to predict the mechanical properties. RW was not a significant factor to predict any mechanical property. Cleavage was the most sensitive one to changes in temperature followed by shear, modulus of rupture, and modulus of elasticity. These results could be of great importance in the chipping process.  相似文献   

15.
Studying the impregnation and distribution of oil-based preservative in dried wood is complicated as wood is a nonhomogeneous, hygroscopic and porous material, and especially of anisotropic nature. However, this study is important since it has influence on the durability of wood. To enhance the durability of thermally modified wood, a new method for preservative impregnation is introduced, avoiding the need for external pressure or vacuum. This article presents a study on preservative distribution in thermally treated Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) Karst.) sapwood using computed tomography scanning, light microscopy, and scanning electron microscopy. Secondary treatment of thermally modified wood was performed on a laboratory scale by impregnation with two types of preservatives, viz. Elit Träskydd (Beckers) and pine tar (tar), to evaluate their distribution in the wood cells. Preservative solutions were impregnated in the wood using a simple and effective method. Samples were preheated to 170 °C in a drying oven and immediately submerged in preservative solutions for simultaneous impregnation and cooling. Tar penetration was found higher than Beckers, and their distribution decreased with increasing sample length. Owing to some anatomical properties, uptake of preservatives was low in spruce. Besides, dry-induced interstitial spaces, which are proven important flow paths for seasoned wood, were not observed in this species.  相似文献   

16.
Abstract

Differences in durability between heartwood and sapwood of Norway spruce [Picea abies (L.) Karst.] were investigated to determine wood qualities most favourable for use in outdoor constructions above ground. Trees grown on sites with either good or poor access to water were used. Seventy-eight specimens measuring 20 × 50 × 300?mm3 separated into heartwood and sapwood, half untreated, half painted, were exposed horizontally outdoors above ground for 5.5?years with the pith side up and the bark side down. Crack length and crack number were measured. Fungus growth and surface changes were visually estimated. Fungus type was determined by microscopic analysis. The main finding was that spruce heartwood had fewer and shorter cracks and less surface-discolouring fungus growth than sapwood. This was valid for both painted and untreated wood. After 2?years’ exposure, the cracks in sapwood (upper surface) were more than three times longer and about five times more numerous than in heartwood for both painted and untreated boards. Microscopic study showed that surface discoloration was due mainly to Aureobasidium pullulans, together with a few other discolouring fungi. After 5.5?years, initial decay was established on the surface and in the end grain of four untreated test objects.  相似文献   

17.
对海南岛乐东尖峰岭27年生柚木6个种源的生长及与材质有关特性进行测定与分析,结果表明:种源间树皮厚度、心材宽度、基本密度差异极显著,树高、材积、枝下高、边材宽度差异显著,而胸径、边材年轮数及心材率差异不显著,说明在种源水平上对柚木进行生长和与材质有关特性的改良具有较大的潜力,尤其进行木材生长性状、基本密度和心材宽度的种...  相似文献   

18.
Maritime pine (Pinus pinaster Ait.) is an important timber and pulpwood species covering about 4 million ha in Portugal, Spain and France. This work studied the cross-sectional distribution of heartwood and sapwood along the stem using 3D modelling on 20 trees. The target was to assess the potential of this species for the industrial production of heartwood sawn products. The maritime pine stems were characterized by wide sapwood of 10 cm, in average, and the presence of heartwood at all height levels with constant diameter up to 35 % tree height, decreasing afterwards. In the radial section, the heartwood follows a circumferential-like shape which changes along the stem. Pith eccentricity index values were low and homogeneous regarding to stem and higher for heartwood. Heartwood cross-sectional shape was constant up to 45 % of total height of the tree and more elongated upwards. The constant heartwood diameter, low taper and pith eccentricity index, and an approximate circular shape up to 10 m height indicated these species’ potential to produce solid wood products made out of heartwood.  相似文献   

19.
Dielectric spectroscopy of Scots pine   总被引：1，自引：0，他引：1  
Dielectric properties of Scots pine (42 trees) were compared with density, moisture content (MC), and resin acid content (RAC) (of heartwood). The samples were measured in frozen, green, conditioned and non-conditioned dry moisture states to evaluate the potential of dielectric spectroscopy in determining the wood characteristics at different stages of wood processing. Heartwood and sapwood parts of each sample were measured separately, and through-transmission measurement was conducted in longitudinal and tangential direction at frequencies from 1 MHz to 1 GHz. The MC and density correlated significantly with the dielectric parameters in both measurement directions but especially in longitudinal direction. The RAC of the heartwood correlated significantly with tanδ and ε″/(ε′ ? 1) of the green samples measured in the tangential direction at frequencies above 200 MHz. The correlation at 1 GHz was ?0.56 for green samples, ?0.66 for conditioned samples and ?0.61 for non-conditioned samples (P < 0.001, for all). The study suggests that the extractives also affect radio-frequency dielectric responses, which might be used for extractive analyses of pine heartwood.  相似文献   

20.
Norway spruce [Picea abies (L.) Karst.] heartwood and sapwood have differing wood properties, but are similar in appearance. An investigation was made to see whether near-infrared spectroscopy (NIRS) could be used with multivariate statistics for separation between heartwood and sapwood in dry state on tangential longitudinal surfaces. For classification of wood into sapwood and heartwood, partial least square (PLS) regression was used. Orthogonal signal correction (OSC) filtering was used on the spectra. This study shows that a separation of sapwood and heartwood of spruce is possible with NIR spectra measured in a laboratory environment. The visible-wavelength spectra have significant influence on the predictive power of separation models between sapwood and heartwood of spruce. All 44 specimens in the calibration set were correctly classified into heartwood and sapwood. Validation of the model was done with a prediction set of 16 specimens, of which one was classified incorrectly.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号