首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 109 毫秒
1.
In order to produce deep shades of colour, ramie fibre was subjected to pretreatment by cationization, caustic mercerization (slack and tension condition), and liquid ammonia mercerization. The untreated and pretreated samples were dyed with 0.5 to 7 % concentrations (on mass of fiber (o.m.f)) of Liyuansol Red FL-2BL reactive dye. The dyeing properties of dye exhaustion, fixation, colour uniformity, wash fastness, and rubbing fastness were investigated. The results indicated that these pretreatments improved dye exhaustion and fixation on ramie fibre, with no loss of fastness. For the untreated and treated substance, the amount of dye mass absorption increased linearly with increased dye o.m.f. Cationic treatment improved performance, with 89 % and 98 % for exhaustion and fixation, respectively, and the maximum K/S values of all fibers receiving pretreatment. The colour uniformity was acceptable and similar for the untreated and treated ramie fibers, with the exception of cationic-treated fabric dyed at 7 % dye o.m.f that showed a high standard deviation value of colour uniformity. The Freundlich and Langmuir adsorption isotherm models were also used to study the adsorption of dye on ramie fibre; all of the adsorption processes fit the Freundlich model.  相似文献   

2.
Dark brown Alpaca fiber was reduced in shade via selective bleaching with peroxide. Two selective oxidative bleaching methods were tested on alpaca top to assess their effectiveness for color removal and fiber quality properties. Color change, bundle strength, weight loss, fiber diameter, surface modification, dye-ability and dye wash fastness were assessed for both methods and compared with the original brown top. Bleach method 1 (BL-I) showed little surface modification, 5.8 % weight loss and 2.4 % strength loss. D1925 yellowness index was reduced to 74.3 from 83.1 and provided a good base for the dyeing of medium to deep shades. Bleach method 2 (BL-II) displayed considerable surface modification, 7.8 % weight loss and 18 % strength loss. BL-II also resulted in a mean diameter reduction of 1.9 micron during bleaching. Yellow-ness was reduced to 64.5 from 83.1 and provided a very good base for the dyeing of medium to deep shades. BL-I showed better exhaustion of the pre-metallised dye Lanaset Violet B than BL-II. Wash fastness for BL-II was 1 grey scale unit poorer than BL-I. BL-II showed far better color clarity at pale depths however the wash fastness of the finished product was not good enough to maintain the depth or clarity of the color. BL-I showed poorer clarity of color but exhibited better wash fastness results.  相似文献   

3.
The effect of strand spacing and twist multiplier on strength of Siro-spun yarns with reference to the yarn structural parameters was investigated. Of the various structural parameters for staple yarns, fiber migration has a crucial influence on the yarn strength, which in turn to a considerable extent is influenced by the strand spacing and twist multiplier. Achieving the objectives of this research, the yarns were produced from lyocell fibers at five strand spacings and four different twist multipliers. Tracer fiber technique combined with image analysis were utilized to study the yarn migration parameters. Afterwards, the yarns were subjected to uniaxial loading by a CRE tensile tester. The measured results are presented in forms of diagrams and tables. The findings reveal that, as strand spacing is increased, yarn tenacity increases up to strand spacing of 8 mm beyond which it reduces. Analysis of the results indicates that the higher tenacity values at the strand spacing of 8 mm can be attributed to the higher mean fiber position, higher migration factor, higher proportion of broken fibers and lower hairiness.  相似文献   

4.
Treatment of polyacrylonitrile (PAN) onto m-aramid fabric was carried out by pad-dry-cure method using dimethylformamide (DMF) dissolved acrylic fiber solution. The obtained PAN treated m-aramid fabric was dyed using exhaustion method with basic dyes. The effect of PAN treatment on fabric stiffness property was acceptable with acrylic fiber solutions ranging from 1 wt% to 4 wt%. Whilst, more than 4 wt% PAN treated fabrics exhibited undesirable stiffness. The dyeing results showed that PAN treated m-aramid fabrics exhibited a significant increase in color strength when compared to untreated fabric, arising from an increase in anionic dye sites (styrene SO3 ? group). Wash fastness was comparable to that of untreated fabric, indicating the strong interaction between dye molecules and the PAN. Rubbing fastness of treated fabrics was not affected by treatments with PAN concentrations lower than 4 wt%. Further increase in PAN concentration led to poorer rubbing fastness property due to the problem of surface dyeing. For light fastness, the PAN treatment failed to improve the light fastness property which is the main disadvantage of basic dyeing of aramid fabric. Finally, in case of PAN treatments with the range of 1 wt% to 4 wt%, the flame retardancy property of PAN treated m-aramid fabrics was found not affected by the percent add-on. However, above 4 wt% PAN treatment, the flame retardancy performance became deteriorated.  相似文献   

5.
This paper focused on the assessment of the results of two color systems (CIELAB and Hunter) and five color difference equations (CIELAB 1976, Hunter, CIE94, CMC and CIEDE2000) under different illuminants (D65, A, F11 and F2) on disperse dyed nylon fabrics after wash fastness tests. Nylon fabric samples were dyed with four disperse dyes of different hues (red, blue, yellow and black) and later they were subjected to multiple wash fastness tests in order to obtain a controlled color loss. The changes in the color coordinates of the original and washed samples were evaluated by the color difference equations’ under different illuminants. The results showed that yellow-blue color coordinates computed according to CIELAB and Hunter systems differed from each other at a great extent and color difference equations performed different from each other in the different hue zones of the CIELAB color space in accordance with the illuminants under which the computations were made. The highest color difference results were obtained according to CIELAB and the lowest color difference results were obtained according to CIEDE2000. Red and black hues had the highest, and blue and yellow hues had the lowest color difference results according to all formulae and illuminants.  相似文献   

6.
Polyester fabric was pre-treated with laser, followed by dyeing. The experimental results revealed that the rate of dyeing was greatly increased but the final percentage of dye exhaustion at equilibrium did not show any significant change. Based on the thermodynamic parameter of dyeing, it was concluded that laser treatment could provide the possibility of developing a low temperature dyeing process. Morphological and thermal studies revealed that obvious surface structure changes occurred. In the morphological analysis, ripple-like structure was found after laser treatment. This ripple-like structure may have captured more dye particles which could improve the dyeing behavior of polyester fibre. On the other hand, thermal analysis result revealed that the surface of polyester becomes highly amorphous on laser treatment, due to ablation. Meanwhile, XPS analysis showed that hydrophilic functional groups were introduced on to the laser-treated polyester fibre surface. As a result, surface physical and chemical changes induced by laser affect the dyeing behavior of polyester fibre. However, the laser treatment could not impart any adverse effect on color fastness to crocking and washing.  相似文献   

7.
Fruits obtained from shrubs of the Crataegus elbursensis (C. elbursensis) plant demonstrate significant antioxidant and antibacterial properties. In this study, natural dye was sono-extracted from fresh and dried fruits and applied in dyeing and antibacterial finishing of wool. The maximum sono-extraction yield was obtained when optimal conditions of ethanol/ water (4/1 v/v) as extracting solvent, time 30 min, pH 4, temperature 50 oC, and C. elbursensis concentration 10 g/l were used. When wool yarns were dyed with the extracted natural dye, the maximum dye uptake was achieved using dye concentration 75 % owf, and dyeing condition of 100 oC, 60 min, pH 4, and LR 100:1. Different metal salts like aluminum sulfate, copper sulfate, and tin chloride were applied on wool by pre-mordanting method and their effects on dye uptake, color variation, and color fastness were examined. Results showed that the natural dye itself had relatively high uptake and good color fastness on un-mordanted wool. Further, each mordant had different effect on dye uptake, color variation, and color fastness properties depending on its coordination ability with dye molecules and wool chains. Moreover, dyed yarns showed good antibacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) bacteria.  相似文献   

8.
In this study, the in vitro degradation of yarns made from PCL electrospun fibers containing various concentrations of ampicillin sodium salt was investigated. PCL fibers were electrospun and collected as well-aligned fiber bundles and then twisted into yarns. Yarn weight loss, morphology changes in the yarns, and morphology changes in the fiber microstructure with degradation were evaluated. Results showed that the electrospun PCL yarns degraded slowly with a weight loss less than 3 % in 12 weeks. The addition of various concentrations of ampicillin salt increased the degradation rate slightly. The morphological changes observed in fiber microstructure suggested that the degradation underwent bulk erosion and the degradation began with the amorphous regions. Revealed by the fiber morphological changes with degradation, the microstructure of electrospun PCL fibers followed the fringed fibril fiber model. The fiber arrangement in the yarn was impaired by the in vitro degradation environment as well.  相似文献   

9.
The study examined the efficacy of 1-methylcyclopropene (1-MCP), an anti-ethylene compound, as a preventative treatment for ethylene-induced fry color darkening in potato (Solanum tuberosum L.) tubers, without reducing the effectiveness of ethylene as a tuber sprouting control agent. The experiment was conducted for two years with ‘Shepody’ and ‘Russet Burbank.’ Tubers of each cultivar from four separate growers received one of the following treatments: Air (control), Air + 1-MCP (1 (μL.L-1 for 48 h), isopropyl N (3-chlorophenyl) carbamate (chloropropham; CIPC; 1% a.i. [v/v]); continuous ethylene (4 μL.L-1) in air; continuous ethylene pre-treated with 1-MCP once; continuous ethylene pre-treated with 1-MCP and repeated monthly; and continuous ethylene pre-treated with 1-MCP and repeated bi-monthly. Treatment started after suberization and cooling to 9 C, and samples were evaluated at 3-wk (year 1) or 4-wk (years 2 and 3) intervals thereafter until April (Shepody) or June (Russet Burbank). Sprout growth (sprout fresh weight per tuber), fry color (Agtron reflectance units), tuber weight loss, incidence of disease infection and internal disorders were evaluated. Weight loss, tuber infection, and the occurrence of disorders were not affected by any of the treatments. Sprout growth was controlled by the continuous ethylene supply in both cultivars, and single or multiple additions of 1-MCP to the ethylene treatment did not affect the ethylene control of sprouting. As expected, ethylene treatment alone enhanced fry color darkening in both cultivars. In Russet Burbank tubers, fry color was not darkened in any of the ethylene + 1-MCP (once, monthly, or bimonthly) treatments. In Shepody, fry color was not darkened in the ethylene + 1-MCP monthly or bimonthly treatments, but started darkening 4 wk after exposure in the single ethylene + 1-MCP treatment. It is concluded that 1-MCP can be used to control fry color darkening induced by ethylene without blocking ethylene control of tuber sprouting. However, the number of 1-MCP applications required may vary with the cultivar, e.g., one application was sufficient in Russet Burbank but not in Shepody.  相似文献   

10.
Madder is a natural colorant which is commonly applied with metal salts as a mordant to improve its affinity to fibers and color fastness. Madder produces an insoluble complex or lake in the presence of metal ions on mordanted fabric. In this study, wool fabric was pretreated with AgNPs (silver nanoparticles) as a mordant, then dyed with madder. The wool fabric samples were examined by scanning electron microscopy (SEM) and their colorimetric characteristics were evaluated. The formation of spherical silver nanoparticle was confirmed using UV-Visible spectroscopy, SEM images, and elemental analysis. The average size of synthesized silver nanoparticles on the surface of wool fibers is around 73 nm. The dyed wool samples were pretreated with different concentration of Ag+ ions or AgNPs, which showed higher color strength value compared to untreated dyed wool fabric. This pretreatment also presented good antibacterial activity.  相似文献   

11.
The moisture transport expressed with wicking is one of the most important aspects in clothing science and strongly effects on the quality of clothes. Wicking is a spontaneous transport of liquid driven into a porous system by capillary forces. Furthermore, the packing density has a direct relation with the yarn structure. At the present work, the effects of yarn count and twist factor on the wicking height and packing density of lyocell ring-spun yarns was investigated. Achieving the objectives of this research, an image processing method was developed to determine the packing density of samples. Experimental results were also used to develop a regression model to predict the wicking height based on the packing density, yarn count, twist factor and rising time. The results demonstrated that the correlation coefficient between the predicted and measured wicking height was 0.98 indicating the capability of the presented model to predict the wicking height of lyocell ring-spun yarns.  相似文献   

12.
In this paper, a novel method based on logical analysis is proposed to recognize the layout of color yarns of yarndyed fabric from the color pattern. The mathematic expressions of the color pattern and the layout of color yarns are introduced first, and then the fitness of the layout of color yarns to the color pattern is defined by the relation between them. The principle of the proposed recognition method begins with the assumption of the color of the first warp yarn in the color pattern. The whole algorithm procedure is then analyzed in detail with an actual sample color pattern. Experiments on some color patterns recognized from actual yarn-dyed fabrics, some color patterns simulated manually and some color patterns including error color information of floats prove that the method proposed in this paper is effective for detecting the layout of color yarns from the color pattern of yarn-dyed fabric and it has fault-tolerance ability in some degree. The research in the paper can be used to construct the whole recognition system of the parameters of yarn-dyed fabric.  相似文献   

13.
The use of non-toxic and eco-friendly natural dyes on textiles has received much attention due to the increased environmental awareness in order to avoid some hazardous synthetic dyes. In the present study, an eco-friendly approach was developed to impart color and antibacterial properties to silk fabrics dyed with turmeric extract as a non-toxic natural colorant. The natural colorant was extracted from Curcuma Longa rhizome. Copper sulfate, ferrous sulfate and potassium aluminium sulfate were applied in a pre-metallization process as mordanting agents. Antibacterial properties of treated fabrics were evaluated against common pathogenic bacteria, Staphylococcus aureus (Gram-positive) and Escherichia coli (Gram-negative). The effects of dye concentration and mordant types on the obtained color hues, antibacterial efficiency and color fastness of the fabrics were investigated. The results indicated that mordanted and dyed fabrics possessed desirable antibacterial properties. Complete antibacterial activity of the treated fabrics was obtained with 3 %owf (on weight of the fabric) copper sulfate. It was also shown that increasing the dye concentration could lead to a more efficient antibacterial activity on the mordanted dyed fabrics. An optimum level of the antibacterial activity was observed in the sample treated with 30 %owf of turmeric. Furthermore, the results of CIE L*, a*, b* values, FTIR, washing, light and rubbing fastnesses of the dyed fabrics were reported. The mordanted dyed silk fabrics exhibited desirable color fastness properties. These studies proved a direct relationship between the degree of antibacterial activity of the fabrics treated with turmeric and the metals ion concentration.  相似文献   

14.
This research investigated the influence of two flame retardant (FR) mixtures consisting melamine cyanurate (MeCy) and aluminum diethylphosphinate (AlPi), and MeCy and sodium aluminosilicate (SASi) at different weight ratios, on the flammability, thermal behavior and mechanical properties of polyamide 6 (PA6) composite yarns produced by meltspinning. The morphological and chemical properties of PA6/FR filaments were investigated by scanning electron microscopy and Fourier-transform infrared spectroscopy, flame retardancy by vertical burning test UL-94, thermal behavior by thermogravimetric and differential scanning calorimetric analyses, and mechanical properties by tensile tests. The results indicate that within the UL 94 V2 rating, the composite yarns differed significantly from each other in their burning and dripping behavior. The incorporation of both mixtures, MeCy+AlPi and MeCy+SASi, into the PA6/FR yarns significantly decreased the afterflame time relative to pristine PA6, confirming a lower production of flammable volatiles. This phenomenon was attributed mainly to MeCy, which caused an immediate extinguishment of the flame after the withdrawal of the igniting flame. Compared to one component MeCy, the incorporation of the MeCy+SASi mixture enhanced the thermooxidative stability of the PA6/FR yarns because of their additive effect at higher concentrations. In contrast, an antagonistic effect was obtained for the MeCy+AlPi mixture, irrespective of the concentration. Since the incorporation of MeCy+SASi did not drastically reduce the tensile properties of filaments, this mixture enables the production of the PA6/MeCy+SASi composite yarns with the enhanced flame retardancy and thermo-oxidative stability.  相似文献   

15.
Wool fabric was treated with liquid ammonia at -40 °C for 30 and 60 s prior to the application of polypyrrole (PPy). The polymer was deposited on wool fiber using the chemical oxidation method with 0.02 and 0.05 mol/l (Py) monomer concentration and FeCl3 as a catalyst. Functional groups of wool samples were analyzed using FT-IR, and surface morphology was investigated using SEM micrographs. Properties such as water absorbency, surface resistivity, abrasion resistance, weight add-on, and air permeability of coated specimens were explored. The FT-IR outcomes revealed the liquid ammonia pre-treatment changed the amount of amide I (NH), cystic acid, cystic monoxide, and dioxide content of the fiber. SEM micrographs revealed the descaling of wool surface after pre-treatment and smooth coating of polymer. Pre-treatment of wool in liquid ammonia improved absorbency of wool fabric with respect to the treatment duration. The surface resistivity of wool fabric decreased with the increase of monomer concentration and pre-treatment duration. The results of abrasion resistance confirmed that the pre-treated fabric exhibited lower loss of polymer after 200 cycles of abrasion. The weight of the fabric was increased and air permeability decreased when the monomer concentration and liquid ammonia pre-treatment duration was increased.  相似文献   

16.
UHMWPE fibers were dyed with a series of anthrquinoid blue dyes having different length of alkyl substituents at general dyeing condition. The dyeability was investigated at various conditions and fastness of the dyeings was examined. As the length of alkyl substituents increased, the dyeability toward UHMWPE fibers tends to be improved gradually. Color strength of the fabrics was increased with the increase of dyeing temperature from 100 to 130 °C. From the dyeing rate, equilibrium dyeing at 130°C was achieved at 2–3 h. The tensile strength of UHMWPE fibers after dyeing at 130 °C for 1 h was maintained at a level of 95 % of untreated fiber. However, at prolonged dyeing time at 130 °C, the tensile strength was significantly decreased to a practically unacceptable level. The color fastnesses to washing, rubbing and light of the dyeings were very good showing higher than 4 ratings.  相似文献   

17.
This study is an attempt to investigate the feasibility of alkali pre-treatment to activate surface hydroxyl groups of cellulose fibers in order to enhance the deposition efficiency of silver nanoparticles (AgNPs) onto cotton fabrics. Cotton samples were pre-treated with various alkali solutions containing different earth metal hydroxides (LiOH, NaOH, and KOH). The as-prepared samples were then treated with aqueous silver nitrate followed by reduction treatment with aqueous ascorbic acid, which caused in situ formation of AgNPs on fiber surfaces. The surface structure of the fabrics was characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD) analysis, and colorimetric data. The amount of silver was measured by using inductively coupled plasma-optical emission spectrometer (ICP-OES). Antimicrobial activity was measured against Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli bacteria. It was established that alkali pre-treatment had a substantial effect on the formation and adsorption of AgNPs on the fibers. Alkali pre-treated samples were homogeneously coated by AgNPs with high surface coverage. Alkali type had significant effect not only on the amount of AgNPs on the surface but also on its size. High antibacterial activity against both Gram-positive and Gram-negative strains was also demonstrated, even after 10 cycles washing.  相似文献   

18.
In the present work the natural madder dye (Rubia tinctorum L.) was applied to the simultaneous dyeing and functionalization of polyester (PET) fabric. In the first part of the study the color performance and the durability were revealed for exhaustion dyed fabric. The dyed fabric was then characterized with respect to ultraviolet (UV) protection ability and antibacterial activity against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). CIELab color coordinates, namely the positive a* and b* values, confirmed a yellow/orange color of the dyed fabric. From durability tests, the color showed a moderate to good light fastness and good to excellent fastness to washing and rubbing. The madder dye improved both the UV protective performance and the antibacterial activity of the fabric. With 3 % on weight of fiber (owf) the UV protection factor increased up to 106, and the antibacterial activity up to 86 % against both types of bacteria tested.  相似文献   

19.
Wool/cotton union fabric was dyed with a direct dye in union shade. The dyeing was performed in a single bath in relation to four factors: leveling agent (Lyogen SMKI, 0–1.5 % oww), electrolyte (sodium sulfate, 0–10 %), dyeing temperature (85–95 °C), and dyeing time (15–60 min). The dyeing was characterized by dye bath exhaustion (%), color strength (K/S value), washing fastness, and light fastness of dyed sample. Response surface analysis showed that the exhaustion of direct dye increased with electrolyte, dyeing temperature, and dyeing time while the K/S value followed a linear shape with leveling agent and dyeing temperature. An optimized recipe was formulated based on response surface strategy and numerical optimization solution.  相似文献   

20.
Hanji (Korean traditional paper) yarn displays excellent humidity control, air permeability, and absorbency as well as pleasantness to the touch due to its structural characteristics, and thus, it has been developed as a new eco-friendly fibrous materials. In this study, Hanji, having a basis weight of 8 and 10 g/m2, was prepared using mulberry fibers. The prepared Hanji was cut into Hanji tape of 5–10 mm in width using a rotary slitter and then the tape was twisted to manufacture Hanji yarn. To ensure a uniform twist of Hanji yarn and a smooth twisting process, a water supply system was designed to provide water directly at the twisting zone. At a fixed spindle speed, the feeding speed of the delivery roller was varied to provide different twist numbers for the Hanji yarn. The Hanji yarn manufactured with water treatment has higher tensile properties and a softer touch than the Hanji yarn prepared without water treatment. The Hanji yarns have count numbers of 7–11 Ne and tensile strengths of 1.0–1.2 gf/d. Moreover, the fabric from Hanji yarn shows an excellent color fastness of 4.0 grade, staining of 4–5 to washing, and 4–5 grade to dry cleaning.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号