共查询到20条相似文献，搜索用时 15 毫秒
1.
Laminated veneer lumber joints made with metal plate connectors were protected with wood carbon phenolic spheres (CPS) sheeting and tested for creep under fire. The effects of the carbonizing temperature of charcoal, used as raw material for the CPS sheets, the thickness, and the location of the sheet on the joint regarding the fire-resistance performance of the joint were studied. The time to rupture of the joints covered with CPS sheets made from charcoal carbonized at 800°C (CPS800) was slightly prolonged compared with that of uncovered joints. On the other hand, the time to rupture of CPS sheets made from charcoal carbonized at 1600°C (CPS1600) was markedly extended. The changes in the charcoal properties due to increasing the carbonizing temperature might be the main reason the CPS1600 sheets had higher fire-resistance performance. The thickness and location of CPS1600 sheets have significant effects on the fire resistance of the joint. A highly fire-resistant laminated veneer lumber joint was obtained using a CPS1600 sheet. The CPS1600 sheet with a thickness of 3mm covering three sides of the joint prolonged the time to rupture 16-fold compared with that of unprotected joints.Part of this paper was presented at the 4th International Wood Science Symposium, Serpong, Indonesia, September 2002 相似文献
2.
Bond quality and joint performance between laminated veneer lumber (LVL) and metal plates were investigated. Commercially fabricated LVL made of Douglas fir veneer and bonded with phenol-formaldehyde resin as well as three types of epoxy adhesives were used. Various surface preparations and treatments were applied to ordinary steel, stainless steel, and aluminum plates to remove the weak boundary layer that is incompatible with the resin and form a stable adherend layer that is chemically and mechanically compatible with the resin. Small specimens were tested in shear to search the most suitable metal surface for bonding with LVL. Generally, shear strength obtained for the specimens bonded with aluminum plates was lower than those bonded with ordinary steel plates. Among them chemically treated (ChT) and roughened (R) surfaces have demonstrated superior performance. To investigate strength performance and bond quality, LVL beams jointed with metal plates were tested while bending. The best results were obtained for specimens bonded with zinccoated metal plates, though good results were obtained also for ChT and R plates. However, the fracture proved to be fragile when no drift pins were used, even for high-performance surface treatments. The usage of drift pins was necessary to add toughness and avoid the brittle status of the fracture. 相似文献
3.
Pierre Berard Ping Yang Hidefumi Yamauchi Kenji Umemura Shuichi Kawai 《Journal of Wood Science》2011,57(2):100-106
The use of low-grade logs to build spirally wound laminated veneer lumber (LVL) has been studied and improved from the point
of view of the gluing process, fiber orientation angle, and end joint of the LVL. The butt joint appears to be the fracture
point when the column is submitted to a compressive or bending load. Owing to the complexity of cylindrical LVL, we used a
finite element method to simulate the mechanical behavior of part of its wall. This part was small enough to be considered
flat but was representative of the structure, especially in the area of the butt joint. This allowed us to test the validity
of different settings of the parameters involved in the manufacturing process. To feed data for this model, we used the results
established for the linear and nonlinear behavior of raw hinoki in Part I of this series of articles. We then used this numerical
model to improve the quality of the butt joint by testing different settings of the joint. We show that reducing the butt
joint gap under 0.5 mm, which requires only a few changes in the production line, provides an important increase in the modulus
of upture and nonnegligible improvement of the modulus of elasticity compared to that for a ≥ 1 mm butt joint gap. 相似文献
4.
本文对高频胶合的马尾松LVL和杨木LVL的老化性能进行了讨论,并比较了乳液酚醛树脂胶和酸固化酚醛树脂胶在BDB28和A1080加速老化后的胶合剪切强度的损失率。得出的结论如下:1)乳液酚醛树脂肢胶合的马尾松LVL,胶合剪切强度随老化时间的延长逐渐趋于稳定,最后稳定在老化前强度的70％左右;2)乳液酚醛树脂胶的老化性能比酸固化酚醛树脂胶好;3)对于乳液酚醛树脂胶马尾松LVL和酸固化酚醛树脂胶杨木LVL,可以用BDB28处理方法代替A1080加速老化方法快速测定其胶合剪切强度的损失率。 相似文献
5.
ABSTRACTCertain important quality parameters of red maple (Acer rubrum) laminated veneer lumber (LVL) impregnated with three waterborne formulations: copper azole (CA-B), micronized copper azole (MicroCA or MCA) and alkaline copper quaternary (ACQ-D) bonded with phenol formaldehyde or cross-linked polyvinyl acetate (XPVAc) adhesives were evaluated. Pre-dipping of veneers before LVL production and two post-manufacturing procedures, viz., vacuum-pressure and post-dipping of LVL, were applied. Maximum copper retention in pre-dip-treated, vacuum-pressure and post-dip-treated LVL was 1.4, 9.7 and 1.7?kg/m3, respectively. Copper retention in MCA-treated LVL was relatively lower than soluble formulations. Various physical, mechanical and bonding properties of treated LVL such as density, water absorption, swelling, flexural properties, hardness, tensile shear strength, delamination and wood failure (%) were studied and compared with untreated LVL. Little to negligible deleterious effect was observed on properties of LVL due to these chemical treatments. Analysis of variance results showed that most of properties of red maple LVL were not significantly different compared with those of untreated LVL. Therefore, vacuum-pressure impregnation process can be used to treat the red maple LVL with novel micronized copper formulations for increasing the service life of such products against biodegradation without affecting techno-mechanical quality parameters. 相似文献
6.
Pierre Berard Ping Yang Hidefumi Yamauchi Kenji Umemura Shuichi Kawai 《Journal of Wood Science》2011,57(2):107-113
The use of low-grade logs to build spirally wound laminated veneer lumber (LVL) has been studied and improved from the point of view of the gluing process, fiber orientation angle, and end joint of the LVL. The butt joint appears to be the fracture point when the column is submitted to a compressive or bending load. Owing to the complexity of cylindrical LVL, we used a finite element method to simulate the mechanical behavior of part of its wall. This part was small enough to be considered flat but was representative of the structure, especially in the area of the butt joint. This allowed us to test the validity of different settings of the parameters involved in the manufacturing process. To feed data for this model, we used the results established for the linear and nonlinear behavior of raw hinoki in Part I of this series of articles. We then used this numerical model to improve the quality of the butt joint by testing different settings of the joint. We show that reducing the butt joint gap under 0.5 mm, which requires only a few changes in the production line, provides an important increase in the modulus of upture and nonnegligible improvement of the modulus of elasticity compared to that for a ≥ 1 mm butt joint gap. 相似文献
7.
Ciprian Pîrvu Hiroaki Yoshida Masahiro Inayama Motoi Yasumura Kinji Taki 《Journal of Wood Science》2000,46(3):193-201
In past years high priority was given to developing a seismic design for wood structures, including research on the response of wood structures to earthquakes. In this study a new type of portal frame with relatively large span was developed for the traditional Japanese wooden houses with large openings at the front to strengthen the structure. Stainless steel plates coated with zinc and glued with epoxy adhesives on laminated veneer lumber (LVL) members, composed of Douglas fir veneer and bonded with phenolformaldehyde resin, were used. The connection between the frame's beam and columns and between the columns and groundsills was mechanical, with bolts. The subject of this research was to analyze strength properties and failure behavior of glued LVL metal joints used as structural components and to evaluate the response of LVL portal frames under cyclic lateral loading. The results show that portal frames using glued LVL metal plates have a good multiplier for the shear walls and may be applied to traditional Japanese structures. The equivalent viscous damping provided good energy dissipation in the frames. The joints displayed good mechanical behavior during tests; moreover, the structures demonstrated high strength, stiffness, and ductility, which are necessary for a seismic design.Part of this paper was presented at the 47th annual meeting of the Japan Wood Research Society, Kouchi, April 1997; and at the 5th world conference on timber engineering. Montreux, Switzerland, August 1998 相似文献
8.
单板层积材加工成梁构件应用于建筑结构材时,由于材料本身的强度和刚度不足,其结构构件不能满足现代多、高层以及大跨度建筑的需求。竹集成材是原竹经过切削成竹片、低温干燥、碳化、涂胶,再同方向平面或侧面组坯、热压胶合而成的竹基复合材料,其力学性能与稳定性优于木材。将集成竹材作为增强材料用于加固单板层积材梁是一种简单有效的提高梁极限承载力的方法。通过进行竹板增强单板层积材组合梁四点弯曲试验,研究了集成竹板对单板层积材受弯性能的增强效果。结果表明,在单板层积材受弯构件上下部粘贴集成竹板可提高构件极限承载力10%～50%。同时,考虑单板层积材和集成竹材料的非线性,推导出了适用于组合梁的极限承载力计算公式,计算结果与试验结果吻合良好。 相似文献
9.
选择木荷15个代表性种源,以研究火险期鲜叶主要抑燃性和助燃性化学组分的种源差异及地理变异模式。结果表明,木荷叶片含水量、灰分、木质素、粗脂肪和苯-乙醇抽出物5个化学组分在种源间存在显著的差异,其最高和最低种源测定值分别相差5％、31％、80％、66％和33％,尤以灰分和粗脂肪两组分的种源差异最大。木荷种源鲜叶的上述5个化学组分都呈现随纬度变化的地理模式,木质素和粗脂肪质量分数还与产地经度有关。较之于分布区北部的种源,木荷南部种源鲜叶的含水量、灰分等抑燃性组分质量分数高,粗脂肪、苯醇抽出物等助燃性组分质量分数低。木质素作为一种不易燃烧但燃烧时能释放大量热量的组分,呈与产地纬度显著正相关的关系,有异于含水量和灰分两个抑燃性组分的地理变异模式。结合苗期种源试验结果,可以初步判定分布区南部的种源生长快,根系发达、叶片数量多,鲜叶抑燃性组分质量分数高,助燃性组分质量分数低,因此防火性能较好。 相似文献
10.
森林火灾是危害森林资源的重要自然灾害,突发性强、危害性广、毁灭性大,历来受到社会的广泛关注和重视。森林生物防火通过防火林带建设、林下枯落物降解等措施主动降低森林火灾隐患、减小了森林火灾损失。今后应加强防火专家系统建设、防火林带布局拓扑优化以及森林生物防火技术标准等方向研究,达到森林生物防火标准化、自动化和信息化,发挥森林生物防火的最佳效果。 相似文献
11.
Curved laminated veneer lumber (LVL) is manufactured from glue-coated pieces of rotary-cut veneers assembled and pressed between molds. In this study, curved LVLs were produced from two fast-growing wood species such as massion pine (Pinus massoniana Lamb.) and poplar (Populus euramericana CV. I.) for use in furniture. In addition to the applicability of the two wood species used, the optimum technological conditions of curved LVL production with radiofrequency (RF) heating and the physical and mechanical properties of curved LVL were investigated. The results are as follows: (1) Curved LVL made from massion pine and fast-growing poplar shows excellent mechanical properties. These fast-growing wood species are suitable for curved LVL being used as furniture structural members. (2) The mechanical properties of curved LVL are affected by frequency, voltage, RF application time, and moisture content, with the RF application time and moisture content having more important effects on the mechanical properties than the frequency and the voltage. (3) The mechanical properties of curved LVL increase with a linear increase in the density of curved LVL.The abstract of this study was presented at the 9th Annual Meeting of the Chugoku Shikoku Branch of the Japan Wood Research Society, Tottori, October 4, 1997 相似文献
12.
13.
Laminated products, such as laminated veneer lumber (LVL) or plywood (PW), have become important recently. The objective of
this study was to determine and compare properties of panels fabricated with veneers of Gmelina arborea trees in a fast-growth plantation and glued with phenol formaldehyde resin. The results showed that LVL and PW physical and
mechanical properties are comparable to those of solid wood with a specify gravity of 0.60. Moreover, these panels can be
cataloged into group 2 of PS 1–95 of the Voluntary Products Standard of the United States. The difference in physical properties
was not statistically significant between LVL and PW panels, except for water absorption. Some mechanical properties, such
as hardness and glue-line shear, modulus of rupture in perpendicular flexure, nail and screw withdrawal parallel, and perpendicular
strength, were statistically different between LVL and PW. However, no differences were established for the modulus of elasticity,
tensile strength parallel to the surface, or tensile strength perpendicular to the surface. The differences were attributed
to the venners’ orientation in the panels studied. 相似文献
14.
15.
浙江省4种常绿阔叶树种枯落物的燃烧特性比较 总被引：1，自引：0，他引：1
研究利用锥形量热仪,对浙江省4种常见常绿阔叶树种,冬青(Ilex chinensis)、木荷(Schima superba)、甜槠(Castanopsis eyrei)和紫楠(Phoebe sheareri)的枯落物进行燃烧性试验。结果表明:木荷落叶的热释放速率,总热释放量、烟产生速率、总烟释放量均比较低,火灾性能指数最大,其小枝的火灾性能指数也相对较大,表现出较强的阻火性能,因而木荷枯落物具有较强的防火性能;甜槠落叶的总热释放量较大,火灾性能指数最小,燃烧性最强,但其小枝却相反;而紫楠落叶释烟、释热均比较缓慢,火灾性能指数较大,其小枝的火灾性能指数却最小,可见紫楠落叶耐火,小枝易燃。该研究可为浙江省防火树种筛选以及防火林带的建设提供参考。 相似文献
16.
圆筒形单板层积材(简称圆筒LVL)是一种新型木质工程材料，它是以螺旋缠绕的方式将单板加工成交错层积的构造，从而抑制弹性模量的下降。圆筒LVL具有很好的力学性能和优良的工程性能，可广泛应用于建筑等领域。本文就圆筒LVL的制造方法、研究状况、特点及用途等进行了较为详细的归纳总结。 相似文献
17.
Tomoyuki Hayashi Atsushi Miyatake Feng Fu Hideo Kato Masahiko Karube Masaki Harada 《Journal of Wood Science》2005,51(5):486-491
To investigate the durability of structural laminated veneer lumber (LVL), outdoor exposure tests have been conducted since
1990 at a field-testing site at the Forestry and Forest Products Research Institute. This article is the second interim report
on the results after 9 years of exposure. Seven kinds of structural LVL with no preservative treatment were subjected to the
tests. Almost all the exposed specimens were decayed by a kind of brown rot fungi (Pseudomerulius aureus (Fr.) Julich). The degree of decay varied with wood species; grand fir and western hemlock LVL in particular showed weak
resistance against the decay. All the specimens were stored for more than 1 year in a testing room conditioned at 20°C and
65% relative humidity. We then measured the ultrasonic velocity of the specimens by the Pundit method, penetration depth by
the Pilodyn method, and bending strength by a conventional bending test. Correlation between nondestructive measurement factors
and the density was strong even on LVL with many adhesive layers. The nondestructive testing method was found to be applicable
to LVL as well as solid lumber. After the nondestructive measurements, each LVL was cut into three types of specimen (top:
T, middle: M, and bottom: B) for the bending tests. The bending strength varied with the type of specimens. Correlation between
modulus of elasticity and modulus of rupture was strong even in the decayed specimens. 相似文献
18.
介绍了单板层积材、密实型单板层积材在国内外的研究和利用概况.探讨了采用低分子量酚醛树脂浸渍处理杨木单板的方法制备杨木单板层积材的生产技术.结果表明:施胶量相当时,浸渍方式与涂胶方式生产的单板层积材相比,密度相当,吸水厚度膨胀(24hTS)降低了24%,胶合强度提高了:16%,弹性模量(MOE)和静曲强度(MOR)分别提高了20.17%和44.76%.采用浸渍树脂方式生产的密实型强化杨木单板层积材随着吸药量的增多,密度增大;24hTS减小;胶合强度随着吸药量的增加先增大而后趋于平稳;MOE和MOR先增大后减小.当吸药量为168%时,MOE、MOR达到最大,分别为15.34GPa和135.31 MPa.密实型强化单板层积材能够满足建筑和木结构等结构材要求,具有良好的发展空间. 相似文献
19.
Tekat Dwi Cahyono Wayan Darmawan Eka Novriyanti 《Wood material science & engineering》2020,15(3):155-162
ABSTRACTA study to determine the quality of laminated veneer lumber (LVL) from samama wood (Anthocephalus macrophyllus) was carried out. Samama is a fast-growing endemic wood in eastern Indonesia. Factorial of three factors in RAL design was used to investigate the influence of veneer thickness, juvenile proportion and veneer lay-up to the quality of the resulted samama LVL. The veneer thicknesses were 1.5 and 3.0?mm. Juvenile proportions were arranged in five levels, which were 100% of juvenile veneer, 100% of mature veneer and combination of both juvenile and mature with juvenile proportion of 14%, 43% and 71%. Two veneer lay-up used in this study were loose side met loose side and tight side met loose side. The result of the study showed various specific gravity of LVL by different proportions of juvenile. This factor also affected the other physical traits. Shear strength of the LVL was equal to the solid wood, yet MOE and MOR were affected by juvenile proportion and veneer lay-up. LVL developed from 100% of mature veneer exhibited the highest MOE and MOR, yet no significant difference was noted in MOE and MOR between LVL 100% of juvenile and other tested juvenile proportions. 相似文献
20.
人工林杨木的用途选择——实木或单板层积材 总被引：9，自引：0，他引：9
实木材性对单板层积材强度的贡献率可衡量单板层积材强度中源自实木材性的份额,是人工林杨木单项用途选择的基础。本文以３个无性系实体杨木和由３种不同厚度杨木单板分别组配的单板层积材为对象,以由贡献率引出的实木与单板层积材的份率差值为依据,研究得出人工林杨木的最终用途选择。结果表明：６９杨、７２杨和６３杨３个无性系杨木的平均份率差值分别为５７％、－１５％、－２９％,说明６９杨宜用作实木,７２杨和６３杨宜用作单板层积材;杨木用作不同组配结构的单板层积材时,实木与３５６５ｍｍ、２６１４ｍｍ、１５４５ｍｍ３种厚度单板组配的单板层积材的平均份率差值分别为４３％、－１３％和－４３％,说明实木与较厚的３５６５ｍｍ单板组配的单板层积材相比,杨木宜用作实木,与较薄的２６１４ｍｍ和１５４５ｍｍ单板组配的单板层积材相比,杨木宜用作单板层积材。不同荷载作用的结果下用途选择结果显示,在抗剪强度、弹性模量和冲击韧性３项性能上的份率差值为正,此时杨木宜用作实木;在抗弯强度、抗压强度和硬度３项性能上的份率差值为负,此时杨木则宜用作单板层积材。 相似文献