共查询到20条相似文献，搜索用时 31 毫秒
1.
Studies on samples of 20 hard-grained wheat cultivars and a commercial flour that varied in starch and protein quality showed that both characteristics influenced the texture of Japanese alkaline noodles (ramen). Flour swelling volume (FSV) and flour pasting characteristics (peak viscosity and breakdown) determined with a Rapid-Visco Analyser (RVA) assessed independently of α-amylase effects, were negatively correlated with total texture score. Protein quality, as indicated by farinograph stability, was positively correlated with total texture score. RVA pasting characteristics were substantially affected by small levels of α-amylase, and inactivation by means of 1 mM AgNO3 was a critical requirement in characterizing the quality of the starch component of flour. 相似文献
2.
A hard white spring wheat was milled to yield three patent flours with different starch damage levels by manipulating reduction grinding conditions, and each flour was sieved to give three different particle sizes (85–110, 110–132, 132–183 μm). Raw alkaline noodles were prepared using either 1% w/w kansui (sodium and potassium carbonates in 9:1 ratio) or 1% w/w sodium hydroxide. Noodles prepared with sodium hydroxide were significantly brighter, less red, and more yellow than those made with kansui. Differences in noodle color among flour treatments were evident but were attributable to differences in flour refinement rather to than particle size or starch damage. Noodles were rested for 1 hr after processing before cooking. Alkaline reagent was the main factor associated with cooking loss, being ≈50% greater for sodium hydroxide noodles because of higher pH compared with kansui noodles. Cooked sodium hydroxide noodles were thicker than kansui noodles, and cooked strands for both noodle types became thicker as starch damage increased and as particle size became coarser. Instrumental assessment of cooked noodle texture showed that maximum cutting stress (MCS), resistance to compression (RTC), recovery (REC), stress relaxation time (SRT), chewiness (CHE), and springiness (SPR) were influenced by the type of alkaline reagent. Flour particle size and starch damage also influenced noodle texture but the magnitude of the effects and the trends were dependent on alkaline reagent. MCS of kansui noodles was much greater than for sodium hydroxide noodles. MCS of kansui noodles increased as starch damage increased but, in contrast, MCS of sodium hydroxide noodles decreased with increasing starch damage. REC of kansui noodles increased with increasing starch damage and decreased with larger particle size, whereas for sodium hydroxide noodles REC decreased with increasing starch damage and declined dramatically with larger particle size. Kansui noodles exhibited significantly shorter SRT than sodium hydroxide noodles. SRT of kansui noodles was only moderately affected by starch damage and particle size, whereas for sodium hydroxide noodles, SRT became much shorter as flour became coarser and starch damage became higher. CHE of kansui noodles was greater than for sodium hydroxide noodles. CHE of kansui noodles increased as starch damage increased. In contrast, CHE of sodium hydroxide noodles decreased as starch damage increased and also decreased as flour became coarser. SPR of both noodle types decreased as flour became coarser and starch damage became greater. On the basis of these experiments, flour of smaller particle size is an asset to the cooking quality of sodium hydroxide noodles, but high starch damage is to be avoided. For kansui noodles, the impact of flour particle size on cooked noodle texture was less evident and low starch damage, rather than high starch damage, was an asset. 相似文献
3.
不同品种小麦粉的粉质特性对速冻熟制面条品质的影响 总被引：2，自引：3，他引：2
为研究不同品种小麦粉与速冻熟制面条质构特性之间的关系,选取30种小麦制粉,用FOSS定氮仪、快速黏度仪、粉质仪和拉伸仪等测定面粉品质指标,制作速冻熟制面条,用质构仪测定质构特性。采用描述性统计、主成分和聚类分析方法对30种小麦面粉和速冻熟制面条的质构关系进行了分析。结果表明:不同品种小麦粉的湿面筋、糊化温度、弱化度、粉质质量指数与硬度呈极显著相关(P0.01);蛋白质、湿面筋、总淀粉含量、最终黏度、回生值、糊化温度、粉质吸水率、粉质曲线稳定时间、面团形成时间、弱化度、粉质质量指数、拉伸曲线面积、拉伸阻力、最大拉伸阻力与剪切力呈极显著相关(P0.01);小麦粉的粉质特性,除衰减值、峰值时间和延伸度外,均与拉伸力呈极显著相关(P0.01)。根据方差贡献率提取出可以反映原变量84.023%信息的5个因子,因子1主要反映面粉的粉质拉伸特性,因子2反映小麦粉糊化特性,因子3反映蛋白质特性,因子4和因子5共同反映小麦粉的淀粉特性。这些性状在小麦粉的评价方面起着重要作用,在加工中要注重对它们的选择。聚类分析将30种小麦粉分为4类,结果表明,不能仅凭小麦粉的指标数据和质构数据来选择制作速冻熟制面条的原料,还需考虑到感官评价的影响。该结论可为小麦粉在速冻熟制面条加工应用方面提供一定的理论参考。 相似文献
4.
Mineral content, as determined and expressed by ash content, serves as an index of wheat flour quality for flour millers and food manufacturers who prefer flour of low mineral content, even though the significance of mineral content on the functional properties of wheat flour is not well understood. We explored whether minerals have any influence on the functional properties of wheat flour and product quality of white salted noodles. Ash, obtained by incinerating wheat bran, was incorporated into two hard white spring wheat flours and their starches to raise the total ash content to 1, 1.5, or 2%. Pasting properties were determined using a rapid visco analyzer (RVA). Addition of ash increased the peak viscosity of the flours in both water and buffer solution but did not affect the peak viscosity of starch. Wheat flours with added ash showed lower pasting temperature by approximately 10°C in buffer solution. Mineral extracts (15.3% ash) isolated from wheat bran, when added to increase the ash content of wheat flour and starch to 2%, increased the peak viscosity and lowered the pasting temperature of flour by 13.2–16.3% but did not affect the pasting properties of the isolated starch. The mineral premix also increased peak viscosity of wheat flour but not in starch. Added ash increased noodle thickness and lowered water retention of cooked noodles while it exhibited no significant effect on cooked noodle texture as determined using a texture analyzer. 相似文献
5.
This study evaluated the blending of flours made from an Ontario hard red winter wheat (HWF) and an Ontario soft red winter wheat (SWF) and compared it with a commercial standard noodle flour (control) made from Canadian Western Hard Red Spring wheat to assess the impact on white salted noodle‐making performance and texture of cooked noodles. Flour characteristics, gluten aggregation, and starch pasting properties were assessed with a farinograph, GlutoPeak tester, and Rapid Visco Analyzer, respectively. The machinability of dough was evaluated with an SMS/Kieffer rig attached to a TA.XT Plus texture analyzer. Tensile and bite tests of cooked noodles were also conducted. Blending HWF with standard noodle flour decreased gluten strength and dough extensibility linearly proportional to the blend ratio, whereas a curvilinear response from blending SWF with standard noodle flour was observed. HWF demonstrated more favorable pasting properties except for lower peak viscosity for noodle making than standard noodle flour. Below a 20% blend ratio with HWF, no significant changes were seen on dough extensibility, cooking loss, tensile properties, and bite testing parameters of cooked noodles. It can be concluded that blending HWF up to a 20% level caused no significant change in the processing properties of dough and cooked noodle quality. The results also showed that the GlutoPeak tester is a sensitive tool for evaluating gluten strength in wheat flour. 相似文献
6.
Durum wheat straight‐grade flour samples, representing the cultivars Commander and Strongfield, a composite cargo mixture of Canada Western Amber Durum cultivars and a Japanese commercial durum flour were used to make yellow alkaline noodles. A Canada Western Red Spring common wheat composite straight‐grade flour was included in the study for comparative purposes. Alkaline noodles were prepared using 1% w/w kansui reagent (sodium and potassium carbonates, 9:1) and stored for 1, 2, 3 and 7 days at 4°C to duplicate a normal convenience store operation. The raw noodle color of the durum alkaline noodles exhibited significantly better noodle brightness, L*, and yellowness, b*, as compared to noodles prepared from common wheat at all storage periods. The number of discolored specks in the durum flour based noodles was significantly lower as well as significantly lighter than those of common wheat at all time intervals. Noodles prepared from Commander, Strongfield, or the cargo composite flours displayed significantly lower water uptake during cooking than both the commercial durum flour and the common wheat noodles. The commercial durum flour noodles displayed the thinnest cooked noodles, while the common wheat flour noodles were the thickest. Evaluation of cooked noodle texture, immediately after production and subsequent storage of the raw noodles at 4°C for 1, 2 and 3 days before cooking showed a general increase in maximum cutting stress (MCS) with storage. Noodles prepared from Commander flour consistently display MCS values exceeding those of CWRS as well as the highest resistance to compression (RTC) and recovery (REC) measurements. The visual improvements in noodle brightness, enhanced yellowness, reduced speck numbers and darkness in combination with equivalent to improved cooked noodle texture attributes compared with common wheat flour suggests that durum flours are an ideal material for fresh, refrigerated yellow alkaline noodles. 相似文献
7.
Monisha Bhattacharya Jamshid Jafari-Shabestari Calvin O. Qualset Harold Corke 《Cereal Chemistry》1997,74(4):417-423
Wheat landraces possess a wide diversity in starch physical properties that could be useful in breeding for improved quality of specific products, such as various types of Asian noodles. The pasting properties (using a Rapid Visco-Analyser [RVA]) and flour swelling volume (FSV, using silver nitrate to inactivate α-amylase activity) of wholemeal, were measured for 242 hexaploid accessions of Iranian landrace wheat. FSV values and the peak viscosities were positively correlated (r = 0.73***). FSV values in the landraces ranged from 8.3 to 15.9 mL/g and peak viscosities ranged from 139 to 305 RVA units (RVU). In comparison, FSV of cvs. Eradu and Klasic were 18.6 and 15.0 mL/g, and peak viscosities were 355 and 303 RVU, respectively. Of the landraces, Iranian Wheat Accession (IWA) 8602488 had the highest peak viscosity (305 RVU) and exceptionally high hot- and cool-paste viscosities. Two accessions, IWA 8602430 and 8600544, displayed pasting characteristics considered desirable for high-quality Japanese white-salted noodles. Four landraces were identified that had starch with unusually high resistance to shearthinning. Texture profile analysis was done on the wholemeal gels formed in the RVA canister. The variation in parameters such as hardness, chewiness, and adhesiveness in the landraces greatly exceeded that in the cultivars. The hot-paste viscosity, breakdown, setback, and final viscosity values, but not the peak viscosity or FSV, were highly significantly correlated with the hardness, chewiness, and adhesiveness of the gel. The Iranian landraces appear to present useful genetic variation for developing wheats for special uses. 相似文献
8.
The compositions and physical properties of Japanese salt and alkaline noodle flours were contrasted and compared to those of flours from U.S. hard white and soft white wheats (HWW and SWW) and from Australian SWW wheats often segregated for salt noodles. The alkaline noodle flours averaged 11.5% protein, which was 3% higher than the salt noodle flours, and they had lower ash content (0.35 vs. 0.41%). Granulation of the salt noodle flours showed the same proportion of small particles (<38 μm) as in soft wheat flours but different levels of intermediate and large particles. The level of small particles was ≈10% greater in salt noodle flours than in the alkaline noodle flours. The alkaline noodle flours had ≈8% more fine particles and 2.5% more damaged starch than the HWW flours, which is consistent with fine grinding of hard wheat flour in the noodle flour. Starch damage also was higher in the salt noodle flours (5.3%) than in the SWW flours. The salt noodle flours had a higher sodium dodecyl sulfate (SDS) sedimentation volume and a higher gluten index than the SWW flours from the United States. The SDS volume and gluten index were lower for the alkaline noodle flours than for the HWW flours, showing the preference for a mellow gluten of low-intermediate strength in alkaline noodle flour. Mixograph data also supported the conclusions of mellow gluten in alkaline noodle flour. The swelling powers (1.7% at 92.5°C) for Australian SWW, salt noodle, U.S. HWW, U.S. SWW, and alkaline noodle flours, were 19.4, 18.1, 17.0, 16.1, and 15.8 g/g, respectively, showing the preferences for high- and low-swelling starch, respectively, in the salt noodle and the alkaline noodle flour. A similar order of flour swelling was indicated by peak viscosity of flours heated at 12% solids in starch paste viscosity analysis. Water holding capacity of flour was correlated highly (r = 0.95, P < 0.01) with swelling power, both measured at 1.7% flour solids at 92.5°C. 相似文献
9.
Three patent flours, each possessing three different levels of starch damage were prepared from a single hard white spring wheat. Each flour was sieved to yield three flours with different particle size distributions (85–110, 110–132, 132–183 μm). Raw alkaline noodles were prepared from the nine flours using either 1% w/w kansui (sodium and potassium carbonates in 9:1 ratio) or 1% w/w sodium hydroxide. Uniaxial stress relaxation parameters percent stress relaxation (SR%), initial rate of relaxation (k1) and the extent of relaxation (k2) were measured on the raw noodles immediately after production (t = 0 min) and at 60 min. Raw noodles after resting for 60 min were optimally cooked and stress relaxation parameters were measured. Raw noodles at t = 0 min exhibited SR%, k1, and k2 that were significantly (P < 0.0001) influenced by both the degree of starch damage and the type of alkaline reagent used. Flour particle size only influenced SR% and k1 (P < 0.025) but had no impact on k2. In raw noodles aged for 60 min, both SR% and k2 were significantly influenced by alkaline reagent, particle size, and starch damage (P < 0.01) while k1 was only affected by the degree of starch damage (P < 0.0001). Cooked noodle SR parameters were all significantly (P < 0.0001) influenced by alkaline reagent, particle size, and the degree of starch damage. Cooked noodles prepared from starch with low damaged flours within any given particle size range, regardless of the type of alkali employed, yielded the most rheologically elastic‐like (firmer) noodles. Two potential mechanisms by which the degree of starch damage influences noodle elastic like texture are discussed. 相似文献
10.
R. McLean K. M. O'Brien L. E. Talbert P. Bruckner D. K. Habernicht M. J. Guttieri E. J. Souza 《Cereal Chemistry》2005,82(5):559-564
Production of common wheat (Triticum aestivum L.) in the Pacific Northwest of the United States specifically for Asian noodle products is a relatively new goal for grain producers. We surveyed commercial fields of the hard white spring wheat cultivar Idaho 377s in two years to determine the variables contributing to Asian noodle quality and to validate previous observations made with small‐plot research. Fields were surveyed in 1998 and 1999 in two areas of the Snake River Plain of southeastern Idaho separated by ≈100 km, with both irrigated fields and rain‐fed fields sampled in both zones. Samples were evaluated for grain characteristics then milled and evaluated for flour quality, alkaline noodle color, and color and texture of nonalkaline Chinese (salted, neutral pH) noodles. Grain from rain‐fed fields produced brighter and more yellow alkaline noodles than grain from irrigated fields. Grain produced in rain‐fed fields also had lower peak flour pasting viscosity than grain produced in irrigated fields. Flour ash was lowest in grain from rain‐fed fields located in a higher elevation district (Upper Valley) and greatest in grain from irrigated fields located in a lower elevation district (Lower Valley). Noodle hardness and chewiness were greater in Chinese noodles made from grain produced in the Upper Valley than grain from the Lower Valley. Chinese noodle color had significant interaction with the location and irrigation management used for producing the grain. However, Chinese noodle brightness was consistently negatively correlated with flour protein concentration. The color and texture of noodles produced from flours milled from on‐farm commercial production was consistent with previous experiment station small‐plot research. 相似文献
11.
Patent (60% yield) and straight-grade flours of Canada Western Red Spring (CWRS) and Canada Prairie Spring White (CPSW) wheat were used to determine the influence of different ratios of alkaline salts, their concentration, and NaCl on the texture and color characteristics of the yellow alkaline noodles. Addition of 3% (w/w) salt to any formulation resulted in a significant increase in the amount of work required to process the raw noodles, while significantly lower work input was observed for noodles prepared using a 5% (w/w) 9:1 Na-to-K carbonate ratio without salt formula. Wheat class, extraction rate, and alkali formulation had a significant effect on raw noodle brightness with noodles prepared using 5% carbonate being brighter than the 1% carbonate noodles. Maximum cooked noodle thickness was achieved from all flours using a 1% 9:1 Na-to-K carbonate ratio, 3% salt formulation. The inclusion of 3% NaCl into the formula resulted in noodles significantly thicker than the corresponding salt-free formula for all flours. Cooked noodle texture parameters evaluated were maximum cutting stress (MCS), resistance to compression (RTC), recovery (REC), and stress relaxation time. In all cases, the presence of 3% salt in the various formulations resulted in a decrease in each parameter relative to the corresponding salt-free formulation. Desirable bite (MCS), chewiness (RTC, REC), and relaxation times were achieved with a 1% concentration of alkali salts, without NaCl, regardless of the Na-to-K carbonate ratio. Use of a 5% concentration of alkali salts resulted in a significant reduction in texture that was most pronounced for the 1:9 Na-to-K carbonate formulation. 相似文献
12.
Starch was extracted from 14 sweetpotato genotypes from the Philippines. The Rapid Visco-Analyzer (RVA) viscoamylographs of the starches showed Type A pasting curves, characterized by a high pasting peak followed by a high degree of shear-thinning. The major difference among genotypes was in the sharpness of the peak, with some showing a very sharp peak while others showed a broad peak. This difference was related to time from onset of pasting to peak viscosity, and to stability ratio (holding viscosity/peak viscosity), which were also highly correlated (r = 0.84, P < 0.01) to each other. Stability ratio was also correlated to noodle firmness (r = 0.95, P < 0.01), rehydration (cooked weight) (r = -0.89, P < 0.01), and swelling volume of the starch (r = -0.62, P < 0.05). The amylose content was correlated significantly only to peak viscosity (r = -0.84, P < 0.01). Significant differences in texture and cooking quality of the starch noodles produced from the different genotypes was found. It was shown that the RVA viscoamylographs could be used to detect differences in pasting characteristics of sweetpotato starch which are related to quality of noodle produced. 相似文献
13.
A variety of Rapid-Visco Analyser (RVA) operating conditions have been tested with starch, flour, and wholemeal for predicting the quality of wheats for the manufacture of Japanese white-salted noodles. Using starch as the substrate, an initial temperature of 60°C has been found to be optimum, and the best heating time from this initial temperature to the peak temperature of 95°C was ≈6 min. Significant correlations were found between peak viscosity of starch pastes and noodle quality under these operating conditions. For flour and wholemeal samples, the correlations were not as high as for isolated starch. The correlations with wholemeal or flour and noodle quality could be improved by the addition of α-amylase inhibitors. Measuring RVA viscosity of flour or wholemeal in the presence of silver nitrate gave viscosities which showed highly significant correlations with noodle quality. These correlations were similar to those obtained with isolated starch. It appears that the improvement is due to inhibition of the α-amylase present in grain and flour. Correlations were also observed between flour paste viscosity and alkaline noodle quality. These could be increased either by inhibiting α-amylase with silver nitrate or by pH adjustment with sodium carbonate but the change was not significant. The improvement of the correlations by α-amylase inhibitors in this sample set was not as great as observed with Japanese white noodles. 相似文献
14.
D. W. Hatcher M. J. Anderson R. G. Desjardins N. M. Edwards J. E. Dexter 《Cereal Chemistry》2002,79(1):64-71
Several reduction grinding conditions were used on a Canadian Western Red Spring (CWRS) farina to yield flours of comparable protein content within three specific particle size ranges (132–193, 110–132, 85–110 μm) at three starch damage levels (3.0, 3.9, 7.0 Megazyme units). White salted noodles (1% w/w NaCl) were initially processed at a fixed absorption (32%). Dynamic oscillatory and large deformation creep measurements indicated that doughs with lower starch damage, thick or thin, exhibited lower G′ (storage modulus), higher tan δ (G″ [loss modulus]/G′) values, and greater maximum strain during creep than doughs with higher starch damage. There were no clear trends between work input during sheeting and either starch damage or particle size. Instrumental texture analysis of raw noodles showed no significant differences due to either starch damage or flour particle size. Flours with fine particle size gave cooked noodles with the best textural attributes, whereas starch damage exhibited no consistent relationship with cooked noodle texture. Cooking loss was greatest in samples with highest starch damage and coarsest particle size; water uptake was inversely related to starch damage and particle size. Experiments were repeated at adjusted water absorptions (32–36.5%) for fine and coarse flours with highest and lowest starch damage. Differences in raw noodle dough rheological properties were largely eliminated, confirming that differences noted at constant absorption were primarily due to flour water absorption. Work input during sheeting was inversely related to starch damage and was higher for fine particle size. Cooking losses were highest for higher starch damage and fine particle size. Water uptake was highest for fine particle size, but in contrast to cooking loss, was higher at lower starch damage. Textural parameters indicated superior cooking quality when particle size was finer and starch damage was lower. Flour particle size and starch damage (as indicated by water absorption) are both primary quality determinants of white salted noodle properties and, to some extent, exert their influence independently. 相似文献
15.
16.
Double‐null partial waxy wheat (Triticum aestivum L.) flours were used for isolation of starch and preparation of white salted noodles and pan bread. Starch characteristics, textural properties of cooked noodles, and staling properties of bread during storage were determined and compared with those of wheat flours with regular amylose content. Starches isolated from double‐null partial waxy wheat flours contained 15.4–18.9% amylose and exhibited higher peak viscosity than starches of single‐null partial waxy and regular wheat flours, which contained 22.7–25.8% amylose. Despite higher protein content, double‐null partial waxy wheat flours, produced softer, more cohesive and less adhesive noodles than soft white wheat flours. With incorporation of partial waxy prime starches, noodles produced from reconstituted soft white wheat flours became softer, less adhesive, and more cohesive, indicating that partial waxy starches of low amylose content are responsible for the improvement of cooked white salted noodle texture. Partial waxy wheat flours with >15.1% protein produced bread of larger loaf volume and softer bread crumb even after storage than did the hard red spring wheat flour of 15.3% protein. Regardless of whether malt was used, bread baked from double‐null partial waxy wheat flours exhibited a slower firming rate during storage than bread baked from HRS wheat flour. 相似文献
17.
The effects of wheat protein and starch on yellow‐alkaline noodles have not been fully clarified. Twenty‐four hard winter wheats with varying protein, hot‐water swelling power (SP95), and polyphenol oxidase (PPO) activity were milled into long‐patent and short‐patent flours. Protein, SP95, and PPO activity in the 48 flours were 8.2–12.9%, 16.2–24.1 g/g, and 80–157 ΔA480/mg of protein/min, respectively. Lightness of raw noodles declined with increasing protein and PPO levels but yellowness decreased and then increased. Tensile force to break the cooked noodles was positively correlated with SP95 and protein. Compression (50%) force of noodles made from flour with high SP95 ≈21 g/g, averaged ≈20% below those made from low SP95 ≈17 g/g of flour. Compression force was measured in the long dimension of a single noodle strand using a rectangular probe. The instrumental measurements suggest that alkaline noodles made from a single‐null partial‐waxy wheat with medium SP95 ≈19.9 g/g will have a tender bite and a cohesive texture compared with those from a low SP95 wheat with a hard bite and fracturable texture. Furthermore, alkaline noodles from a double‐null partial‐waxy wheat with high SP95 will have an extra soft bite unless flour protein is above ≈12.5%. Hard‐white, dual‐purpose wheat should have a low level of PPO and, depending on the preferred noodle‐eating texture, a low to medium SP95 level. Such wheats with medium protein levels (11–12%) are well suited for alkaline noodles because of improved color and surface smoothness, whereas the same wheats with 12–13% protein are well suited for bread. Wheats with medium SP95 also reduce cooking loss and increase cooked yield. 相似文献
18.
不同淀粉糊化及凝胶特性与粉条品质的关系 总被引：7，自引：2，他引：5
为了研究粉条加工过程中原料淀粉的糊化及凝胶特性对粉条品质的影响,该文对绿豆、红薯、马铃薯、大米和玉米等5种原料淀粉的糊化凝胶特性及其粉条品质进行了测定,并对淀粉糊化凝胶特性与淀粉粉条品质之间的关系进行探讨。结果表明:5种淀粉原料所制的粉条中,绿豆粉条的品质是较好,其次就是马铃薯粉条和红薯粉条,大米粉条和玉米粉条的品质较差;淀粉的糊化特性与粉条品质之间具有显著相关性,按显著程度的大小(P值大小)依次是:峰值黏度谷值黏度衰减值回生值、最终黏度;淀粉凝胶的硬度、弹性、黏性和咀嚼性对粉条品质的影响较大,按显著程度的大小(P值大小)依次是:硬度黏性咀嚼性弹性。在粉条加工原料选择及粉条品质改善中可以考虑用谷值黏度、回生值以及淀粉凝胶特性特征值回复性、咀嚼性和黏性作为考核衡量指标。研究结果为粉条生产中原料选择及品质改善提供参考依据。 相似文献
19.
The use of the Rapid Visco Analyser (RVA) for application in the screening of wheat breeding lines for starch quality and potential noodle quality has been limited by relatively low sample throughput. Current methods generally enable only 20–30 samples to be tested each day. This study sought to develop a more rapid time‐temperature profile that could be applied to whole meal samples. A profile that involved a total analysis time of 7.5 min/sample gave measurements of peak viscosity (PV) and breakdown (BD) on whole meal that were highly correlated with corresponding measurements obtained using a more conventional profile that had been applied to low‐extraction flours. BD and PV were also highly correlated with the total texture score of ramen (Chinese‐style alkaline noodles as manufactured in Japan), but only when 1 mM AgNO3 was used to eliminate the effects of α‐amylase. 相似文献
20.
Physicochemical properties and protein composition of 39 selected wheat flour samples were evaluated and correlated with the textural properties of Chinese hard‐bite white salted noodles. Flour samples were analyzed for their protein and wet gluten contents, sedimentation volume, starch pasting properties, and dough mixing properties by farinograph and extensigraph. Molecular weight distribution of wheat flour proteins was determined with size‐exclusion (SE) HPLC, SDS‐PAGE, and acid‐PAGE. Textural properties of Chinese hard‐bite white salted noodles were determined through texture profile analysis (TPA). Hardness, springiness, gumminess, and chewiness of cooked noodles were found to be related to the dough mixing properties. Both protein content and protein composition were found to be related to TPA parameters of noodles. The amount of total flour protein was positively correlated to hardness, gumminess, and chewiness of noodles. The absolute amounts of different peak proteins obtained from SE‐HPLC data showed positive correlations with the hardness, gumminess, chewiness, and springiness of noodles. The proportions of these peak proteins were, however, not significantly related to texture parameters. The proportions of low‐molecular‐weight glutenins/gliadins and albumins/globulins, as observed from SDS‐PAGE, were correlated positively and negatively, respectively, to the hardness, gumminess, and chewiness of cooked noodles. Among the alcohol‐soluble proteins (from acid‐PAGE data), β‐gliadins showed strong correlations with the texture properties of cooked noodles. For the selected flour samples, the total protein content of flour had a stronger relationship with the noodle texture properties than did the relative proportion of different protein subgroups. Prediction equations were developed for TPA parameters of cooked noodles with SE‐HPLC and rapid visco analysis data of the 30 flour samples, and it was found that about 75% of the variability in noodle hardness, gumminess, and chewiness values could be explained by protein composition and flour pasting properties combined together. About 50% of the variations in cohesiveness and springiness were accounted for by these prediction equations. 相似文献