首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 578 毫秒
1.
A liquid chromatographic (LC) method for the determination of colchicine in pharmaceutical dosage forms and the bulk drug was evaluated in an interlaboratory study which included 13 participating laboratories. The method involves extraction (or dissolution) of the active ingredient with methanol-water (1 + 1), followed by filtration of the extract and reverse phase LC using an octylsilane bonded phase column and UV detection at 254 nm. The mobile phase consists of a methanol-phosphate buffer mixture (pH = 5.5). Three commercial tablet formulations (0.5-0.6 mg colchicine/tablet), 1 synthetic injectable preparation (0.510 mg colchicine/mL), and 1 bulk drug sample were assayed in duplicate by the proposed method. The reproducibility and repeatability standard deviations based on nonpooled results for each sample ranged from 0.0062 mg/mL to 0.0147 mg/tablet and from 0.0037 mg/mL to 0.0127 mg/tablet, respectively; the corresponding coefficients of variation ranged from 1.21 to 2.54% and from 0.73 to 2.19%, respectively. The mean recovery from the synthetic injectable formulation was 100.0%. The method has been adopted official first action.  相似文献   

2.
A reverse phase liquid chromatographic method for the determination of methyldopa, methyldopa-hydrochlorothiazide, and methyldopachlorothiazide in tablets was collaboratively studied by 8 laboratories. Each collaborator received 20 samples that included drug substance, synthetic and commercial tablet compositions. The overall repeatability and reproducibility standard deviations for commercial tablets were 1.11 and 1.75% for methyldopa, 0.96 and 1.62% for chlorothiazide, and 1.21 and 2.15% for hydrochlorothiazide, respectively. The overall recoveries of methyldopa, chlorothiazide, and hydrochlorothiazide added to synthetic tablets were 100.78, 100.70, and 101.34%, respectively. The method has been adopted official first action.  相似文献   

3.
A liquid chromatographic method for the determination of coumarin anticoagulants in tablets was collaboratively studied by 7 laboratories. The method uses an octadecylsilane-bonded microparticulate column, tetrahydrofuran-methanol-water-acetic acid mobile phase, and photometric detection at 311 nm. Each collaborator received samples of warfarin sodium, phenprocoumon, and dicumarol as a synthetic composite and as commercial individual and composited tablets. Pooled average assay values for synthetic and commercial tablet samples of warfarin sodium were 101.6 and 99.5%, respectively, with a combined reproducibility SD of 2.38% (CV = 2.37%) and combined repeatability SD of 1.49% (CV = 1.49%). Pooled average (SD) assay values for dicumarol and phenprocoumon commercial samples were 98.0 (2.27) and 101.3% (4.00), respectively. The content uniformity determinations of 2 mg warfarin sodium and 25 mg dicumarol tablets indicated average tablet contents (range) of 99.5% (91.0-116.0) and 98.0% (89.8-108.8), respectively. The method has been approved interim official first action.  相似文献   

4.
A stability-indicating liquid chromatographic method is presented for determining sulfamethoxazole in tablets. The method uses a 10 micron silica column, an isooctane-methylene chloride-2-propanol-acetonitrile-glacial acetic acid (70 + 25 + 5 + 5 + 0.5) mobile phase, and photometric detection at 254 nm. Seven laboratories collaboratively studied this method on powdered composite samples prepared from commercial 500 and 1000 mg tablets and on an authentic tablet mixture containing 83.32% added sulfamethoxazole. Mean assay results for the 500 and 1000 mg tablets were 102.2 and 97.9% of declared, respectively (n = 4). The mean recovery value for the synthetic sample was 99.4% (n = 4). The pooled reproducibility standard deviation (SD) (coefficient of variation (CV)) and pooled repeatability SD (CV) were +/- 1.01 (1.01%) and +/- 0.96 (0.96%), respectively. These results were in good agreement with those obtained by the Associate Referee for the titration method of USP XX. The proposed method can also be used for monitoring the presence of sulfanilamide in sulfamethoxazole by increasing the proportions of both acetonitrile and 2-propanol in the mobile phase. The method has been adopted official first action.  相似文献   

5.
A reverse phase liquid chromatographic method previously reported for the determination of acetaminophen in tablets was collaboratively studied by 5 laboratories. Each collaborator received duplicate samples of a synthetic tablet formulation and 3 powdered commercial tablet composites. The composites represented single-component and multi-component proprietary products and a single-component generic product. The pooled repeatability (CVDo) and reproducibility (CVDx) values for the proprietary tablets were 0.89 and 1.34%, respectively. For the generic tablets, these values were 0.66 and 0.74%, respectively. The pooled recovery value for acetaminophen added to the synthetic formulation was 98.9 +/- 0.7% (n = 10) with a CV of 0.75%, CVDo of 0.37%, and CVDx of 0.78%. The overall repeatability of the method was 0.64%, and the overall reproducibility was 0.95%. The method has been adopted official first action.  相似文献   

6.
A liquid chromatographic method for the determination of levodopa in tablets and capsules and levodopa-carbidopa in tablets was collaboratively studied by 6 laboratories. Collaborators were supplied with duplicate powdered composites of levodopa (1 synthetic formulation, 1 commercial tablet, and 1 commercial capsule) and levodopa-carbidopa (1 synthetic formulation and 2 commercial tablets), along with individual levodopa-carbidopa tablets for content uniformity determinations. The repeatability coefficient of variation (CVo) and reproducibility coefficient of variation (CVx) for levodopa single component were 0.48 and 0.87%; for levodopa in combination, 0.50 and 0.90%; and for carbidopa, 0.77 and 1.20%, respectively. Overall, the recovery values for levodopa and carbidopa from synthetic formulations simulating tablets were 100.4 and 99.5%, respectively. The pooled CVDo and CVDx values for the individual tablet assays were 2.07 and 2.30% for levodopa, and 1.80 and 2.24% for carbidopa, respectively. The method has been adopted official first action for determination of the active ingredients in levodopa tablets and capsules and in levodopa-carbidopa tablets and for content uniformity testing in the combination dosage form.  相似文献   

7.
Ten laboratories analyzed 9 pairs of blind duplicate raw milk samples for total solids. A direct forced air oven method (4 h at 100 degrees C) and a modification of the AOAC predry method (16.032) were used. Preliminary evaluation of the modified AOAC method indicated that blank determinations were necessary. Total solids content ranged from 12.0 to 14.6%. Average repeatability standard deviations (Sr) of the direct forced air oven and modified AOAC methods were 0.019 and 0.017, respectively. Average reproducibility standard deviations (SR) of the direct forced air oven and the modified AOAC methods were 0.042 and 0.047, respectively. Average repeatability relative standard deviations (RSDr) for the direct forced air oven and the modified AOAC methods were 0.149 and 0.136%, respectively; average reproducibility relative standard deviations (RSDR) were 0.327 and 0.370%, respectively. Mean repeatability values (r) and reproducibility values (R) were 0.054 and 0.118 for the direct forced air oven method and 0.049 and 0.133 for the modified AOAC method, respectively. The mean test result of the direct forced air oven method (12.7293%) was comparable to that for the modified AOAC method (12.7273%). The modification of AOAC method 16.032 and the direct forced air oven method have been approved interim official first action.  相似文献   

8.
Each of 9 laboratories analyzed 9 pairs of blind duplicate raw milk samples for fat, using the Mojonnier ether extraction method (16.E13-16.E17), and for total solids, using a new direct forced air oven method. Solids-not-fat was determined by subtracting percent fat from percent total solids. The solids-not-fat content of the samples tested in the collaborative study ranged from 8.48 to 9.36%. The average repeatability standard deviation (sr) and the average reproducibility standard deviation (SR) for the solids-not-fat method were 0.019 and 0.041, respectively. Average repeatability (RSDr) and reproducibility (RSDR) relative standard deviations were 0.218 and 0.466%, respectively. The mean repeatability value (r) was 0.055; the mean reproducibility value (R) was 0.117. The difference between milk total solids determined by direct forced air oven drying and milk fat determined by Mojonnier ether extraction has been approved for interim official first action for determination of solids-not-fat content of milk.  相似文献   

9.
Eleven collaborating laboratories analyzed 18 blind duplicate pairs of raw milk samples for fat by the Babcock method and by a modified Mojonnier ether extraction method in 7 round robins conducted over a 14 month period. Ten laboratories used the Babcock method and 10 used the modified Mojonnier method. Fat content of samples ranged from approximately 2.7 to 5.6%. Mean test value of samples analyzed was approximately 3.9% fat. Average standard deviations of within-laboratory repeatability (Sr) of the Babcock and ether extraction methods were 0.029 and 0.015% fat, respectively. Average standard deviations of between-laboratory reproducibility (SR) of the Babcock and ether extraction methods were 0.039 and 0.020% fat, respectively. Average repeatability relative standard deviations (RSDr) for the Babcock and ether extraction methods were 0.742 and 0.396%; average reproducibility relative standard deviations (RSDR) were 1.014 and 0.512%, respectively. Mean repeatability values (r) and reproducibility values (R) were 0.081 and 0.111% for Babcock and 0.044 and 0.056% for ether extraction, respectively. The ether extraction method demonstrated consistently better within- and between-laboratory agreement. The overall mean test value for the Babcock method was significantly higher (0.021% fat) than that for ether extraction. The difference between Babcock and ether extraction fat test results was different for different farms. In addition, the mean difference between percent fat determined by the Babcock and ether extraction methods was different in different months. There was no correlation in the difference between Babcock and ether extraction methods with the absolute level of fat in the samples in the range of 2.7 to 5.6% fat. The modifications of the AOAC Babcock method and the modified Mojonnier ether extraction method have been approved interim official first action.  相似文献   

10.
A liquid chromatographic (LC) method for the determination of pentaerythritol tetranitrate (PETN) in pharmaceutical formulations and the bulk drug triturate was evaluated in an interlaboratory study that included 12 participating laboratories. The procedure involves extraction of the active ingredient with mobile phase, followed by filtration of the extract and reverse-phase liquid chromatography using an octadecylsiliane bonded phase column and UV detection at 230 nm. The mobile phase composition is 35% water in acetonitrile (v/v). Three bulk drug samples (20, 20, and 35% PETN), 2 commercial tablet formulations (20 and 80 mg PETN/tablet), and 1 commercial capsule formulation (45 mg PETN/capsule) were analyzed in duplicate by the proposed method. Repeatability (sr, RSDr) and reproducibility (SR, RSDR) based on peak height measurement for these samples ranged from 0.0066 to 0.1806 (0.53-3.36%) and 0.0165 to 0.2075 (0.76-3.86%), respectively. Results for peak area measurements ranged from 0.0145 to 0.2011 (0.93-3.74%) and 0.0231 to 0.2091 (1.28-3.89%), respectively. The method has been approved interim official first action by AOAC.  相似文献   

11.
A liquid chromatographic (LC) method is described for the determination of quinine, hydroquinine, sodium saccharin, and sodium benzoate in soft drinks. The method involves simple sample preparation, direct injection onto an octadecylsilane column, and elution with a methanol-acetonitrile-water-acetic acid (20 + 10 + 70 + 1) mobile phase. Eluted constituents are measured spectrophotometrically at 254 nm. The relationship between peak height and concentration was linear between 20 and 120 micrograms/mL for quinine. A relative standard deviation of 0.82% was obtained for commercial samples spiked with quinine, and the average recovery was 100.3%. The proposed procedure is accurate and rapid and can also detect hydroquinine (a natural contaminant of quinine), sodium saccharin, and sodium benzoate. Linear responses ranged from 0.45 to 20 micrograms/mL for hydroquinine, from 54.8 to 219 micrograms/mL for sodium saccharin, and from 10.1 to 145.1 micrograms/mL for sodium benzoate. The reproducibility of the LC method was evaluated with standard solutions of hydroquinine, sodium saccharin, and sodium benzoate, which produced relative standard deviations of 0.42, 0.46, and 1.13%, respectively. The average recoveries for sodium saccharin and sodium benzoate from spiked samples were 99.4 and 100.2%, respectively.  相似文献   

12.
A collaborative study was carried out on a solid-phase extraction method for separating volatile N-nitrosamines, particularly N-nitrosodimethylamine (NDMA), from combination minced fish or surimi-meat frankfurters with detection by gas chromatography-chemiluminescence (thermal energy analyzer). The results from the 10 collaborators were evaluated using the most recent AOAC guidelines for determining outliers and for the analysis of variance. For NDMA, repeatability standard deviations, sr, ranged from 0.56 to 2.25; repeatability relative standard deviations, RSDr, ranged from 8.9 to 11.5%. Reproducibility standard deviations, SR, for NDMA ranged from 1.40 to 6.49, and reproducibility relative standard deviations, RSDR, ranged from 24.2 to 28.9%. Our data compared favorably to the reproducibility (RSDR) curve of Horwitz. The method has been adopted official first action by AOAC.  相似文献   

13.
A capillary zone electrophoresis method for the determination of inorganic anions and formic acid in honey samples was developed for the first time. The complete separation of chloride, nitrate, sulfate, phosphate, and formic acid was achieved with a simple electrolyte composed by 2 mM potassium dichromate as the carrier solution and background absorbance provider and 0.05 mM tetraethylenepentamine (TEPA) as electro-osmotic flow suppressor (pH 4.00). Injection was performed hydrostatically by elevating the sample at 10 cm for 10 s. The running voltage was -27 kV at 25 degrees C. Indirect UV absorption detection was achieved at 254 nm. The detection limit was in the range between 0.03 and 20 mg/kg, and the quantification limits ranged from 1.52 to 20.6 mg/kg. The calibration graphs were linear in the concentration range from the quantification limit to at least 2.5 g/kg for chloride, 0.25 g/kg for nitrate, 0.75 g/kg for sulfate, 1.50 g/kg for phosphate, and 0.75 g/kg for formic acid. Precision data in the honey samples analyzed showed repeatability and reproducibility relative standard deviations lower than 1.4 and 2.4% for migration time and lower than 1.8 and 4.3% for anion content, respectively. Recoveries of anions in honey samples analyzed ranged from 94.4 to 99.8%. Ten honey samples were analyzed to test the proposed method. Mean contents of 260.5, 3.93, 60.5, 139.4, and 209.3 mg/kg were found, respectively, for chloride, nitrate, sulfate, phosphate, and formic acid in analyzed honeys. These results agreed with literature data.  相似文献   

14.
A collaborative study of a liquid chromatographic method for the determination of aflatoxins B1, B2, G1, and G2 was conducted in laboratories located in the United States, Canada, South Africa, and Switzerland. Twenty-one artificially contaminated raw peanuts, peanut butter, and corn samples containing varying amounts of aflatoxins B1, B2, G1, and G2 were distributed to participating laboratories. The test portion was extracted with methanol-0.1N HCl (4 + 1), filtered, defatted with hexane, and then partitioned with methylene chloride. The concentrated extract was passed through a silica gel column. Aflatoxins B1 and G1 were derivatized with trifluoroacetic acid, and the individual aflatoxins were determined by reverse-phase liquid chromatography with fluorescence detection. Statistical analysis of the data was performed to determine or confirm outliers, and to compute repeatability and reproducibility of the method. For corn, relative standard deviations for repeatability (RSDr) for aflatoxin B1 ranged from 27.2 to 8.3% for contamination levels from 5 through 50 ng/g. For raw peanuts and peanut butter, RSDr values for aflatoxin B1 were 35.0 to 41.2% and 11.2 to 19.1%, respectively, for contamination levels from 5 through 25 ng/g. RSDr values for aflatoxins B2, G1, and G2 were similar. Relative standard deviations for reproducibility (RSDr) for aflatoxin B1 ranged from 15.8 to 38.4%, 24.4 to 33.4%, and 43.9 to 54.0% for corn, peanut butter, and raw peanuts, respectively. The method has been adopted official first action for the determination of aflatoxins B1, B2, G1, and G2 in peanut butter and corn at concentrations greater than or equal to 13 ng total aflatoxins/g.  相似文献   

15.
Two analytical methodologies for the simultaneous analysis of eight sulfonamide antibiotics in animal feeds were developed. Analytes were extracted in a simple and rapid procedure by manual shaking with an ethyl acetate/ultrapure water mixture (99:1, v/v) without further sample cleanup. Mean recoveries ranging from 72.7% to 99.4% with relative standard deviations below 9% were achieved from spiked animal feed samples. Determination was carried out by high-performance liquid chromatography using fluorometric detection with precolumn derivatization. The separation of the derivatized compounds was performed using two different chromatographic columns: a conventional C(18) column and a recently available core-shell particle Kinetex C(18) column. Both methods were validated in-house in six different feed matrices, and the two approaches were compared. The experiments showed that the method using the Kinetex column was superior with regard to speed of analysis and precision, both under repeatability and intermediate reproducibility conditions. The limits of detection and quantification were also greatly improved, below 0.10 and 0.34 μg/g, respectively. Finally, this novel approach was successfully applied to the analysis of real feed samples.  相似文献   

16.
An atomic absorption spectrophotometric (AAS) method applicable to a wide variety of mercury-containing drugs has been developed and subjected to a collaborative study. Samples were digested with a water-HCl-HNO3 (4 + 3 + 1) mixture, and the mercury was determined in solution by AAS. High levels of mercury were measured with a conventional air-acetylene flame, whereas low levels were measured by the flameless technique. Each of 7 collaborators received duplicate synthetic samples of a tincture, an ophthalmic solution, and an antiseptic solution, and duplicate commercial samples of an ointment and an injectable. The overall mean value found by collaborators for mercury in these samples was 100.13%. The corresponding overall repeatability SD (CV, %) and reproducibility SD (CV, %) values were 2.18 (2.18) and 3.38 (3.38), respectively. The proposed AAS method has been adopted official first action.  相似文献   

17.
Each of 5 collaborating laboratories determined volatile N-nitrosamines in 3 blind quadruplicate sets of latex rubber infant pacifier samples, using a gas chromatographic-thermal energy analysis (GC-TEA) method. Volatile N-nitrosamines are extracted from cut-up pacifier nipples with CH2Cl2. The extract is concentrated and subjected to high temperature purge and trap, and the nitrosamines are eluted from the trap and determined by GC-TEA. N-Nitrosodibutylamine (NDBA) was the only nitrosamine found in sufficient concentration to allow analysis. NDBA concentrations of the 3 sets of samples were 82.6, 21.0, and 7.12 ng/g rubber. The repeatability relative standard deviations ranged from 7.46 to 24.0% and the reproducibility relative standard deviations from 7.46 to 29.2%. The minimum detectable level of NDBA by this method is 3.6 ng/g rubber. The method has been adopted official first action.  相似文献   

18.
A proposed method using the fluoride (F) ion-selective electrode has been developed for determining the fluoride ion concentration in tablets and solutions containing sodium fluoride. The method has been subjected to collaborative study. Eight samples consisting of 2 authentic fluoride solutions, 2 commercial fluoride solutions, and 4 commercial fluoride tablets were sent to each of 11 collaborators together with a copy of the method. Single assays on the authentic fluoride solutions known to contain 1 mg F/5 mL were performed with average recoveries of 99.5 and 99.6% and relative coefficients of variation (CV) of 2.11 and 1.91%, respectively. Single assays of 2 commercial fluoride solutions declared at 1 mg F/5 mL gave mean values of 0.994 and 0.990 mg and relative CV values of 1.88 and 2.36%, respectively. Single assays of 2 commercial fluoride tablet preparations declared at 0.5 mg F gave mean values of 0.485 and 0.478 mg and relative CV values of 3.12 and 3.71%, respectively. Single assays of 2 commercial fluoride tablet preparations declared at 1 mg F gave mean values of 0.991 and 0.981 mg and relative CV values of 2.99 and 2.85%, respectively. The method has been adopted official first action.  相似文献   

19.
A method for determining serum zinc concentrations was collaboratively studied by 9 laboratories. Serum samples in polypropylene tubes are directly diluted with 0.03% Brij 35, and zinc is determined by flame atomic absorption spectrophotometry (AAS). A certified standard reference material serves as an external control. Repeatability relative standard deviations (RSDr) were 1.2 and 11.4% and reproducibility relative standard deviations (RSDR) were 6.1 and 12.9% for serum zinc concentrations of 6.36 and 0.63 micrograms/mL, respectively. The method has been approved interim official first action by AOAC.  相似文献   

20.
Reserpine-rescinnamine group alkaloids are extracted from Rauwolfia serpentina preparations into a dimethylsulfoxide (DMSO)-methanol mixture and diluted with 0.5N H2SO4. The chloroform extract of this solution is passed through a 0.1N NaOH-Celite column and then through a silica gel column. The weakly basic alkaloids trapped on the latter column are eluted with a methanol mixture; a portion of the eluate is treated with nitrous acid and the reserpine-rescinnamine content is determined by measuring the intensity of fluorescence of the oxidation product. The following means and standard deviations (11 collaborators) were obtained for the determination of reserpine-rescinnamine group alkaloids in 4 samples of Rauwolfia serpentina (NF reference powder, 100 mg and 50 mg commercial tablets, and a 45 mg synthetic tablet formulation) : 0.174% +/- 0.0112, 0.131% +/- 0.0047, 0.160% +/- 0.0100, and 0.153% +/- 0.0083, respectively.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号