首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
为研究T形板肋对预制带肋底板混凝土叠合板弯曲疲劳性能的影响,对3块T形肋底板叠合板和1块整浇板进行弯曲疲劳性能对比试验,主要考察T形板肋与疲劳荷载幅值对试件疲劳破坏形态及疲劳损伤程度的影响,得到了在不同疲劳循环加载次数下的跨中动位移、混凝土应变、预应力筋应变、残余变形等,分析了在不同疲劳循环加载次数下的刚度退化情况、荷载-应变分布规律、裂缝分布规律及剩余承载力等。研究结果表明,经历200万次疲劳循环加载后,T形肋底板叠合板无明显的刚度和强度退化,增设T形板肋的叠合板能达到与整浇板相同的弯曲疲劳性能;T形肋底板叠合板正截面弯曲疲劳强度计算可采用普通预应力混凝土受弯构件正截面疲劳应力验算的4个假定,最终以此建立了其正截面弯曲疲劳强度验算方法。  相似文献   

2.
In this study, nine simplified short composite columns consisting of core CFST (concrete filled steel tube) of different diameters and outer reinforced concrete were constructed to study their compressive performance under axial or eccentric compression. The failure mode is characterized by the crush of the outer concrete. The bearing capacity increases at first and then decreases with further increase of the position coefficient. It can be concluded that position coefficient is an important structural parameter that has considerable influences on the ultimate bearing capacity of the composite columns. The outer concrete, steel tubes and longitudinal reinforcement are found to work in a cooperative manner under axial or eccentric compression when the position coefficient is about 0.5. An improved bearing capacity algorithm that takes the position coefficient into account has been proposed based on the experimental and simulation results and current technical specification in China. It has been proven to be precise and safe.  相似文献   

3.
预应力装配混凝土复合墙板抗震性能试验研究   总被引:1,自引:0,他引:1  
结合砌体结构的发展现状和住宅产业化的发展趋势,提出一种“预应力装配混凝土复合墙板”,以期望在中小城镇低层建筑民用房屋中发展一种新的结构形式来对砌体结构进行补充。为了考察该复合墙板的抗震性能,对2块不同预应力度的试件进行了拟静力试验。得到了相应试件的抗震性能指标,显示该墙板具有较好的承载能力和变形性能,分析认为所提出的墙板可以达到8度区低层民用房屋的应用要求,可以作为砌体承重墙的一种替代形式,并且对该墙板相关构造提出了改进建议。  相似文献   

4.
Some conclusions were drawn from two groups of in-site tests on concrete pile composite foundations. In the tests, it was found that the pressure under the rigid loading slab is different, in which the pressure under the center of the slab is the less and under the edge of the slab is the biggest. The pile-soil stress ratio is not a constant; it increases with the adding of the load. Most of the pile-soil ratio vary from 9 to 13 in these tests and the load that the piles share can be more than seventy percent of the whole load. It was proved that the bearing capacity of the concrete pile composite foundation is high with a little settlement, so it will be used more and more in the future.  相似文献   

5.
A new kind of steel-concrete composite beam with notched web is proposed, and the bend and shear behaviors of this composite beam are investigated. First of all, the constitution, bearing characteristics and merits of the steel-concrete composite beam with notched web are introduced; then, a group of formulas about the bending capacity, slip between the steel beam and the concrete flange, and the deflection are introduced; after that, the bending behavior, slip effect and bearing characteristic of the steel-concrete composite beam with notched web are studied on 4 specimens, which are tested by applying two concreted vertical loads on the top of concrete flange. And the finite element model is adopted to analyze the results of the 4 specimens; finally, the reliabilities of the formulas are verified by comparing the results of theoretical formulas, the results of tests and that of finite element analysis. Study shows that the bend behavior and shear behavior are fine, and the popularization of this new kind of composite beam which can be broadly used in building engineering will save the consumption of steel.  相似文献   

6.
New types of precast concrete ribbed panels are developed in order to adapt to the complex loading conditions and different floor spans. Based on the yield line theory, equations for the ultimate bearing capacity and yield patterns of two-way composite slabs of different edge conditions and under uniformly distributed loading are developed, and the simplified formulas for the ultimate moment per unit width are proposed. The plastic limit analyses of two examples on the simple support and the fixed support are conducted, and the calculation results show good agreement with the experimental data.  相似文献   

7.
According to the structural features of three main trusses continuous plate truss composite bridge, two composite beam methods are presented by constructing the displacement mode of composite beam elements and deriving the stiffness matrix of composite beam elements. The characteristic of composite beam method one is that the bridge slab is taken as the top flange of the chord of main truss and combined with the chord of main truss to form a steel concrete composite beam; the characteristic of composite beam method two is that the bridge slab is taken as the top flange of longitudinal and traverse beam and form a steel concrete composite beam with longitudinal and traverse beams. And as for the conventional plate beam composite method, the slab is characterized by forming bridge slab system with continuous isotropic sheets and longitudinal and traverse beams to bear load. Also, the comparison between theoretical results and experimental ones verifies the effectiveness of the above three methods.  相似文献   

8.
针对竹筋混凝土结构存在的问题,提出了多种对竹筋的改性方法。在此基础上,对12根采用不同配筋和不同改性方法的受弯构件(11根竹筋混凝土梁和1根钢筋混凝土梁)进行了试验研究,分析了不同改性方法和不同配筋率竹筋混凝土受弯构件的力学性能、破坏形态及其影响因素。研究结果表明:竹筋能有效提高混凝土受弯构件的承载能力;经过适当方法改性后的竹筋能确保竹筋和混凝土之间的有效粘结,其正截面强度计算可以采用平截面假定;竹筋混凝土受弯构件的破坏均为脆性破坏,其破坏形态与其截面配筋率有关。  相似文献   

9.
According to the theory of truss-arch model, the shear mechanism of reinforced concrete beam was analyzed, and formula of shear bearing capacity was proposed. In this formula, softening effect of concrete and the arch function were taken into account, and the coefficients in the formula were amended with experimental data. When the performance difference between the structural material and the original material is huge, the code formula of shear bearing capacity calculation is inapplicable. After the computation, the ratio of the results calculated by truss-arch model theory formula and the results calculated by the current code formula was close to 1, and the standard deviation coefficient and coefficient of variation were smaller than those of standard formula results, and the results calculated by truss-arch model formula were in good agreement with the experimental results. The collected experimental data was calculated with the shear capacity formula in ACI318-08, and the calculation results showed that United States building code was more conservative than the standard of China. The results indicate that the shear bearing capacity formula based on truss-arch model can be used for computation of shear bearing capacity of reinforced concrete beams.  相似文献   

10.
旨在研究复合材料光伏农业大棚的经济性和受力性能,阐明其替代钢结构大棚的可行性。运用有限元软件Midas对某光伏大棚骨架的受力性能进行分析;对光伏大棚最不利节点螺栓的承载力验算;从表面维护和骨架用材两方面进行经济性分析。结果表明:复合材料骨架大棚的杆件最大应力为27.5 k Pa,其柱顶最大位移为9.4 mm,满足相似结构的承载力和容许位移要求;最不利节点螺栓的承载力计算结果表明节点强度足够;从每栋复合材料大棚和钢结构大棚的骨架表面维护及用材两方面的经济性分析结果看,前者初期费用较后者多300元,但使用过程中不再需要追加维护费。从可持续发展的角度看,采用相同骨架的2种材料成本投入相差不大,复合材料更具有环保特点,对农业养殖或种植无不利影响。可以推断,只要结构布置合理,复合材料骨架大棚承载能力绝不输于钢骨架大棚。  相似文献   

11.
RC加气混凝土砌块组合墙加固框架抗震性能试验研究   总被引:1,自引:0,他引:1  
RC加气混凝土砌块组合墙(简称组合墙)是由混凝土梁柱网格与加气混凝土砌块组合形成的一种轻型网格式抗震墙,可用于框架结构的抗震加固。笔者进行了1/2比例空框架试件、组合墙试件和组合墙加固框架试件的低周反复荷载试验,分析了各试件的主要破坏过程,对比了组合墙加固框架前后试件承载能力、刚度等抗震性能变化。试验结果及分析表明:组合墙加固框架后承载力、抗侧刚度有较大幅度提高,中大震及大震阶段其承载力、等效刚度约为空框架和组合墙单独受力之和的0.9倍,两者具有良好的协同工作性能;加固试件的破坏过程基本上遵循填充砌块混凝土框格外框架的破坏顺序,能够发挥组合墙多重抗震防线的特点,采用RC加气混凝土砌块组合墙加固框架是一种较为经济实用的加固方法。  相似文献   

12.
Considered strength classes of concrete, ratio of structural steel to concrete, ratio of steel tube to concrete and eccentricity ratio of load, 6 test specimens of steel tubular columns filled with structural and concrete are designed. The damage phenomena of specimens are described in detail and the failure mechanism is analyzed. The results show the initial failure of the specimens are began from the yield of steel tube, the ultimate failure are ended from the buckling of steel tube caused by the expansion of core concrete. Due to the existence of structural steel, the ductility of specimens is superior to steel tubular columns. Before the yield of steel tube, the plane cross-section assumption of specimens can be put into use. The ultimate bearing capacity of specimens is increased with the increase of strength classes of concrete, ratio of structural steel to concrete and ratio of steel tube to concrete. But the ultimate bearing capacity and ductility are decreased with the increase of eccentricity ratio.  相似文献   

13.
Study of Cracks on Rubber Concrete Beams Based on Fractal Theory   总被引:2,自引:0,他引:2  
The flexural performances of a rubber concrete beam and a ordinary concrete beam are studied under concentrated load through the experiment. The influences of the content of the rubber powder in the rubber concrete beam on the bearing capacity and the crack width of beams are analyzed. The experimental results show that the crack distributions on two beam surfaces possess the characteristics of self-similar in statistical sense. The maximum crack width of the rubber concrete beam is less than that of the ordinary concrete beam under the same load level. The performance of anti-crack of the concrete beam is improved by adding the crumb rubber. Using the fractal theory, the fractal dimension values of the surface crack of the beams under different load grades are calculated and the relationship between the fractal dimension and the maximum crack width of the surface cracks is established.  相似文献   

14.
Because high material strength and composite load-bearing are emphasized in constructing members for high-rise steel frame structures, in a composite connection, steel strength has a dramatic influence on both the bearing performance and the composite action of the concrete slab. Based on a finite element analysis, we discuss the composite effect and the connection breaking mode, focusing on the performance change of the composite effect in adopting high strength steel. It can be found from the results that, along with the improvement of the steel strength, the elastic and plastic ultimate strength of the composite connection will increase, the ductility will decrease to a certain extent, and the composite effect of the concrete slab will diminish. The collapse of the concrete in a positive moment side contacting the column flange is viewed as the limiting state of the connection.  相似文献   

15.
The calculation problems of bearing capacity of enclosed reinforced concrete strengthened brick masonry column under axial compression is introduced, which can be available for reference in calculating the bearing capacity of enclosed reinforced concrete strengthened brick masonry column.  相似文献   

16.
Experimental research on flexural behavior of the different grade RC beams strengthened with ferrocement mortar through six RC beams is carried out. The matching of original component concrete to the composite mortar strength rank is studied and its influence on bending strength, the crack-resisting capacity and the bending stiffness of RC beams is analyzed. Based on plane cross-section assumption and the experimental results, the formulas of the theoretical ultimate strength capacity and stiffness are brought forward. The calculated results fit well with the experimental results, to provide a theoretical reference for actual engineering designs.  相似文献   

17.
In the study on the CRCP+AC composite pavement, the form and distribution pattern of cracks are two important factors influencing the performance and the lifetime of the pavement. The concrete damaged plasticity material model incorporated in the general purpose finite element software named ABAUQS was adopted to describe the mechanical characteristics of the CRC slab. Combining with the temperature field database drawn from the three-dimensional transient heat transfer analysis, the structural damage under the condition of temperature changing is analyzed. The structural damage evolution and the crack behavior of the CRC slab subjected to the thermal-mechanical coupling condition are further analyzed, which suggests that the role of the asphalt concrete surface is not confined only to the scope of improving the performance of the road, its capacity for improving the stress state of CRCP slab is worthwhile to be affirmed. And the reasonable thickness of AC layer should be designed in consideration of the thermal contraction and damage properties of the CRC slab comprehensively.  相似文献   

18.
The Quasi static tests of one steel frame and two the composite deep beams infilled steel frames were carried out. The effects of the deep beams on the load capacity, ductility, hysteretic property and energy dissipation of pure steel structure were analyzed. It is found that the hysteresis curve is a straight line with the constant of the stiffness at the beginning and without residual deformation. And the hysteresis curve of specimen was full after yielding, and the skeleton curves had a clear plastic flow phase with triple linear. The lateral drifts of the beam specimens at failure were 1/25 and 1/22. The composite deep beams enhance the initial stiffness, yield load and maximum load bearing capacity of steel frame. Therefore, seismic performance of the composite deep beams is better.  相似文献   

19.
高温下钢管约束型钢混凝土柱的受力性能   总被引:1,自引:0,他引:1  
火灾下无防火保护的结构构件温度会迅速上升,从而造成钢材和混凝土的强度明显下降。为了研究火灾下钢管约束型钢混凝土柱的受力性能,考虑火灾下钢管约束型钢混凝土柱的不均匀温度分布及温度对材料力学性能的影响,提出了火灾下受轴心荷载作用的钢管约束型钢混凝土柱承载力的计算方法。利用有限元软件ABAQUS对提出的计算方法进行了验证,结果吻合较好。进而采用该计算方法对影响高温下承载力的参数进行了分析,研究表明:随着构件截面尺寸的增加以及混凝土强度和钢材强度的提高,构件的承载力逐渐增加,而钢管壁厚的改变对承载力并无太大影响。利用有限元软件ABAQUS分析了荷载比、构件尺寸、钢管壁厚等因素对构件耐火极限的影响,发现耐火极限随着荷载比和钢管壁厚的增加而减小,随着构件尺寸的增加而增大。  相似文献   

20.
The research result shows that the corrosion of reinforcement is one of the dominating factor for decreasing the durability of reinforced concrete structures. In this paper, the significance of the research of corroded reinforced concrete is presented, and an attempt is made to integrate the latest development with regard to the mechanical behaviors of reinforcement corrosion, the damage of concrete due to corroded bars, bond relationship between corroded bars and concrete, as well as the load capacity of corroded reinforced concrete flexural member and compressive member and the seismic behavior of corroded reinforced concrete element. And the trend of its development in future is discussed as well.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号