共查询到20条相似文献，搜索用时 15 毫秒
1.
Addition of a gluten-free flour such as sorghum has negative impact on the quality of wheat dough for bread making. One of the methods which can be used to promote the quality of sorghum-wheat composite dough is to extrude the sorghum flour before incorporation. In this regard, to produce a dough with appropriate bakery properties sorghum flour was extruded at 110 °C and 160 °C die temperature with 10%, 14% and 18% feed moisture. The effect of extruded sorghum flour incorporation (10%) on rheological (farinography and stress relaxation behavior), morphological and temperature profile of sorghum-wheat composite dough were evaluated. Extrusion cooking altered the sorghum-wheat composite dough properties through partial gelatinization of starch granules. Addition of extruded sorghum flour increased the water absorption and dough development time but it decreased the dough stability. Native sorghum-wheat composite dough showed viscoelastic liquid-like behavior whereas addition of sorghum flour extrudate changed dough to a more viscoelastic solid-like structure. Maxwell model was more appropriate than Peleg model to describe the viscoelasticity of the sorghum-wheat composite dough. Extrusion cooking decreased composite dough elasticity and viscosity. Sorghum extrudate increased the heating rate of composite dough crumb during baking. Addition of extruded sorghum flour formed a non-uniform and less compact dough structure. As a result, dough containing extruded sorghum flour had a good potential for producing a high-yielding bread in a short time of baking. 相似文献
2.
Cereal melts were produced via extrusion cooking using a twin-screw extruder at in-barrel moisture contents ranging from 25 to 42% (wb). Dynamic mechanical thermal analysis was performed to determine the plasticizing effect of water on the glass transition (Tg) for melts obtained from degermed corn meal, oat flour, pregelatinized corn starch and pregelatinized waxy maize. For degermed corn meal, Tgwas found to decrease with increasing water contents up to about 30% (wb). Above 30% moisture content, Tgwas found to be essentially constant and approximately equal to 270K. Thus, Wg′ was estimated to be 30% moisture content. For samples of moisture content less than Wg′, loss tangent vs. temperature plots in the glass transition region were observed to be broader and of smaller amplitude than those above Wg. Glass transitions ranged from 270 to 321K for sample moisture contents ranging from 36·3 to 22·2% (wb), respectively. For an oat flour, Tgvalues ranging from 270 to 303K were observed for moisture contents of 39·2 to 26·1% (wb), respectively. Melts formed from pregelatinized corn starch and pregelatinized waxy maize had glass transitions similar to corn meal at a similar moisture content of 27%. The significance of these results, in terms of extrusion cooking of cereals, is discussed in this work. 相似文献
3.
Hydrophilic biopolymer systems reach a state of maximum plasticization at a concentration of water designated as Wg′. The thermomechanical behaviour of various extruded cereals were investigated at concentrations above and below Wg′ to determine the significance of Wg′ on the viscoelastic properties in the rubbery region above Tg. Cereal melts were produced via extrusion cooking using a twin-screw extruder at in-barrel moisture contents ranging from 25 to 42% (wb). Dynamic mechanical thermal analysis (DMTA) was used to determine the viscoelastic properties for melts obtained from degermed corn meal, oat flour, pregelatinized corn starch and pregelatinized waxy maize. All of the extruded melts displayed reductions in the storage modulus of about two orders of magnitude from the glassy to rubbery regimes. At temperatures greater than 320K, another transition is apparent for extruded oat flour. These losses may be attributed to a reduction in physical crosslinks and/or entanglements. With respect to the other melts investigated, differences in the oat flour melts at temperatures above Tgmay be due to the increased presence of protein and lipid. Given the apparent partly crystalline nature of these melts at moisture contents <Wg′, the most appropriate representation of the viscoelastic properties may be isotimic plots of the viscoelastic functions. These contour plots provide a more comprehensive guide to material behaviour than the ‘traditional’ state diagrams found throughout the literature. An important point is that prediction of viscoelastic properties above Tgfor polymers where the internal structure changes with temperature or moisture content, cannot be predicted using the same methods of reduced variables as for amorphous polymers. Thus rather than using these methods, experimental data, such as given here, may prove to be necessary to design or understand processes involving cereal melts based on their viscoelastic properties. 相似文献
4.
Waxy wheat flour (WWF) was substituted for 10% regular wheat flour (RWF) in frozen doughs and the physicochemical properties of starch and protein isolated from the frozen doughs stored for different time intervals (0, 1, 2, 4 and 8 weeks) were determined to establish the underlying reasons leading to the effects observed in WWF addition on frozen dough quality. Using Nuclear Magnetic Resonance (NMR), Differential Scanning Calorimeter (DSC) and X-ray Diffraction (XRD) among others, the gluten content, water molecular state, glutenin macropolymer content, damaged starch content, starch swelling power, gelatinization properties, starch crystallinity and bread specific volume were measured. Compared to RWF dough at the same frozen storage condition, 10% WWF addition decreased dry gluten and glutenin macropolymer contents and T23 proton density of frozen dough, but increased the wet gluten content, T21 and T22 proton density. 10% WWF addition also decreased damaged starch content, but increased starch swelling power, gelatinization temperature and enthalpy, crystallinity of starch and bread specific volume of frozen dough. Results in the present study showed that the improvement observed due to WWF addition in frozen dough bread quality might be attributed to its inhibition of redistribution of water molecules bound to proteins, increase in damaged starch content and decrease in starch swelling power. 相似文献
5.
The investigation explores the possibility of utilizing legume flour (pigeon pea:10–30%) and brown rice flour (35–45%) for production of pasta using twin screw extruder. RSM was used to analyse the effect of feed moisture (28–36%), barrel temperature (70–110 °C) and legume:brown rice ratio on quality responses (in vitro starch and protein digestibility, degree of starch gelatinization, cooking quality, pasting properties, color and textural properties) of pasta. Extrusion processing significantly enhanced in vitro starch and protein digestibility of prepared pasta. The in vitro starch and protein digestibility of pasta ranged between 15.00 and 26.77 g/100 g and 50.34–84.82 g/100 g respectively. Addition of brown rice flour and pigeon pea flour exhibited dominating positive effect on cooking quality of the pasta. Degree of gelatinization of prepared pasta was found in range of 52.13–90.10 per cent. Color characteristics viz. luminosity, redness and yellowness of pasta enhanced with feed moisture. Pasting properties revealed lower peak and final viscosity at higher processing conditions. Firmness of cooked pasta elevated with an increase in the barrel temperature. Acceptability score of health based pasta on the basis of sensory attributes was 8 as inferred from 9 point hedonic scale. 相似文献
6.
Native and moistened wheat flours (moisture contents were 13.5 and 27.0%, respectively) were treated with superheated steam (SS) at different temperatures (140 and 170 °C) and times (1, 2 and 4 min). Their physicochemical and digestive properties were analyzed. For native flour, SS treatment altered the starch molecular structure and behavior slightly. While for moistened flour, crystalline degree, gelatinization enthalpy, amylose leaching (AML) and falling number significantly decreased, but thermal transition temperatures increased with the rise of treating severity. Clumping of starch granules, aggregation of proteins and formation of amylose-lipid complexes occurred in both native and moistened flours. Broader pasting temperature ranges and higher viscosities were found on SS-modified flours. Additionally, SS treatment on moistened flours increased resistant and slowly digestible starch contents. In general, SS treatment induced changes in starch molecular structure and reactions among flour components leading to more stable structures, thus affecting their pasting behavior, thermal properties and in vitro digestion. 相似文献
7.
《Journal of Cereal Science》2005,42(1):33-44
The effects of endosperm vitreousness, cooking time and temperature on sorghum and maize starch digestion in vitro were studied using floury and vitreous endosperm flours. Starch digestion was significantly higher in floury sorghum endosperm than vitreous endosperm, but similar floury and vitreous endosperm of maize. Cooking with 2-mercaptoethanol increased starch digestion in both sorghum and maize, but more with sorghum, and more with vitreous endosperm flours. Increasing cooking time progressively reduced starch digestion in vitreous sorghum endosperm but improved digestibility in the other flours. Pressure-cooking increased starch digestion in all flours, but markedly more in vitreous sorghum flour; probably through physical disruption of the protein matrix enveloping the starch. Irrespective of vitreousness or cooking condition, the alpha-amylase kinetic constant (k) for both sorghum and maize flours remained similar, indicating that differences in their starch digestion were due to factors extrinsic to the starches. SDS-PAGE indicated that the higher proportion of disulphide bond-cross-linked prolamin proteins and more extensive polymerisation of the prolamins on cooking, resulting in polymers of Mr>100k, were responsible for the lower starch digestibility of the vitreous sorghum endosperm flour. 相似文献
8.
Kinetics of starch digestion and functional properties of twin-screw extruded sorghum 总被引：1，自引：0，他引：1
The time-course of starch digestion in twin-screw extruded milled sorghum grain was investigated using an in-vitro procedure based on glucometry. The sorghum grains were hammer-milled, and extruded at three levels each of moisture and screw speed. Irrespective of the extrusion conditions, extruded and non-extruded milled sorghum grain exhibited monophasic digestograms, and the modified first-order kinetic and Peleg models adequately described the digestograms. Extrusion increased the rate of digestion by about ten times compared with non-extrudates. Starch gelatinisation varied in the extrudates, and microscopy revealed a mixture of raw, gelatinised and destructured starch and protein components in the extrudates. Starch digestion parameters significantly (p < 0.05) correlated with extruder response and various functional properties of the extrudates. Extrusion conditions for maximum starch gelatinisation in milled sorghum grain for fastest digestion as an efficient animal feed were interpolated, as well as the conditions for directly-expanded extrudates with potential for human food, where minimum starch digestion is desired. 相似文献
9.
To model the cooking processes of rice, starch gelatinization, the level of fusion of the amylose-lipid complex, and equilibrium water uptake have to be known for any given condition. Starch phase transitions were measured by DSC in two milled Korean round rice kernels whose water contents ranged from 0.18 to 4.7 g g−1 db. Two to three partially overlapping transitions were assessed. Starch thermal transitions were modelled using a double step approach. First, a mechanistic double sigmoid model was fitted with DSC data for any water content value. Each parameter of the mechanistic model was then modelled with conservative empirical water content functions. In this way we obtained an explicit form of phase transition levels as a function of both temperature and water content. In parallel, the water uptake kinetics of rice kernels was determined in the temperature range of 50 °C–100 °C. Equilibrium water uptake was found to be linked to starch phase transitions and a model was built to calculate equilibrium water uptake as a function of modelled starch gelatinization and amylose-lipid complex fusion levels. 相似文献
10.
《Journal of Cereal Science》2014,59(3):387-392
To model the cooking processes of rice, starch gelatinization, the level of fusion of the amylose-lipid complex, and equilibrium water uptake have to be known for any given condition. Starch phase transitions were measured by DSC in two milled Korean round rice kernels whose water contents ranged from 0.18 to 4.7 g g−1 db. Two to three partially overlapping transitions were assessed. Starch thermal transitions were modelled using a double step approach. First, a mechanistic double sigmoid model was fitted with DSC data for any water content value. Each parameter of the mechanistic model was then modelled with conservative empirical water content functions. In this way we obtained an explicit form of phase transition levels as a function of both temperature and water content. In parallel, the water uptake kinetics of rice kernels was determined in the temperature range of 50 °C–100 °C. Equilibrium water uptake was found to be linked to starch phase transitions and a model was built to calculate equilibrium water uptake as a function of modelled starch gelatinization and amylose-lipid complex fusion levels. 相似文献
11.
12.
In this study effects of extrusion cooking on enzyme resistant starch (RS) formation in high amylose corn starches (Hylon V and VII) and the functional properties of RS preparations were investigated. Native starches were extruded at 50, 60, 70% feed moisture contents, at constant screw speed (100 rpm) and barrel temperature (140 °C). Among these samples, the highest RS contents were observed at 60% feed moisture. Therefore, feed moisture in the second and third extrusion cycles was set at 60%. There were significant increases in RS contents of both Hylon V and Hylon VII after the second extrusion cycle (p < 0.05). After the third extrusion, the RS levels reached to 40.0 and 45.1% for Hylon V and Hylon VII, respectively. Substantial loss of birefringence in these samples indicated that the increases in RS were mainly due to RS3 formation. The RS samples produced by extrusion did not have high emulsion capacity, but the ones produced from Hylon VII had high emulsion stability. Although, decreases in L* and increases in b* values of extruded samples were significant as compared to respective native starches, the changes were not substantial. Therefore, their incorporation is not expected to cause major changes in the colour of end-products. 相似文献
13.
To understand the genetic basis of gelatinization temperature (GT), gel textural traits and flour swelling volume, quantitative trait loci (QTL) were mapped for these traits using a doubled haploid (DH) population derived from a cross between indica variety Zai-Ye-Qing 8 (ZYQ8) and japonica variety Jing-Xi 17 (JX17). The results indicated that the starch property parameters were continuously distributed among the DH lines, and some DH lines showed transgressive segregation for all the parameters. A total of 16 QTLs were identified for seven traits. A major QTL, the alk gene on chromosome 6 was significant for the three GT traits, onset temperature (To), peak temperature (Tp), and completion temperature (Tc). This locus could explain 49.4, 38.9, and 28.3% of the total variance, respectively, indicating that GT parameters were substantially controlled by the alk gene which has previously been identified for alkali spreading value (ASV). The additive effects of alk on To,Tp and Tc were from ZYQ8. Another two QTLs on chromosomes 1 and 7 were also identified for the three GT parameters, whose positive effects were contributed from JX17. Another QTL on chromosome 10 with the positive effects coming from ZYQ8 was significant only for Tc. However, the enthalpy (ΔH) of gelatinization was controlled by two minor QTLs on chromosomes 1 and 7. A major QTL, the Wx gene on chromosome 6 was identified for gel hardness and flour swelling volume which explained 58.8 and 36.6% of the total variances, respectively. Another two QTLs were also detected for flour swelling volume, one of which (qSV-7) could explain 21.4% of the total variance. However, gel cohesiveness was controlled by a major QTL located between alk and Wx on chromosome 6. 相似文献
14.
The objective of this work was to evaluate the changes in the thermal and structural properties of maize starch during nixtamalization and the tortilla-making process and their relationship with grain hardness. Three maize types with varying hardness (hard, intermediate, soft) were processed by three nixtamalization processes (classic, traditional and ecological). Starch from the three maize types showed an A-type pattern and two endotherms corresponding to gelatinization and melting of the Type I amylose-lipid complexes. After cooking and steeping, in intermediate and soft grains the partial gelatinization and the annealing affected the starch properties and promoted the formation of amylose-lipid complexes. These effects were not observe in hard grains. The increase in melting enthalpy and the intensity of the peak 2θ∼20° from nixtamal to tortillas demonstrated the formation of amylose-lipid complexes. A third endotherm above 114 °C in some treatments of nixtamal and tortilla starch demonstrated the transformation of some amylose-lipid complexes in a most ordered structures (Type II complexes). The V-type polymorph structure found in native starch, nixtamal, and tortilla corresponds to a coexistence of Type I and Type II complexes. Formation of amylose-lipid complexes in tortillas had a partial effect on decreasing starch retrogradation (r = −0.47, P < 0.05). 相似文献
15.
Drago SR Velasco-González OH Torres RL González RJ Valencia ME 《Plant foods for human nutrition (Dordrecht, Netherlands)》2007,62(2):43-48
The effects of extrusion conditions on cooking degree, flour dispersion viscosity and mineral potential availability of extruded
bean flour were studied. Phaseolus vulgaris beans of the agronomic cultivar “Flor de mayo” were ground and dehulled to obtain
grits and then extruded at different temperatures (140, 160 and 180 °C) and moisture contents (17, 20 and 23%), according
to a bifactorial experimental design. Degree of cooking was estimated by water solubility (WS) and specific mechanical energy
(SME). The effect of variables on WS and SME were analysed by surface response methodology. Flour dispersion viscosity and
mineral availability (estimated by in vitro dialyzability), were also evaluated on selected samples. Results showed that, within the ranges of the variables used for
this study, only the effect of temperature was significant on the degree of cooking. No direct correlation was observed between
water solubility and SME, although a maximum value of WS corresponded to a range of SME values of 400–500 J/g was observed.
Dispersion viscosity decreases as WS increases, so if high calorie density is desired, for instance in order to produce a
cream soup formula, bean grits should be extruded at high temperature and as low moisture as possible, in our case 180 °C
and 17% moisture. On the other hand, the effects of extrusion variables on iron and zinc dialyzability were not much affected. 相似文献
16.
Rice grain chalkiness is an important characteristic, but the difference between chalky and translucent parts in grains is still unclear. Here, we investigated the differences of flour made from the chalky or translucent part of rice grains in three indica and three japonica rice varieties. The chalky flour had significantly lower amylose and protein contents and looser starch granule morphology, and starches in the chalky flour had higher relative crystallinity, higher short chain content but lower long chain content than those in the translucent flour. The water states, determined with nuclear magnetic resonance, differed between the chalky and translucent flour after soaking, cooking and retrograding, and the chalky flour had more bound and free water but less constructural water than the translucent flour. Mostly, the chalky flour had lower viscosity and shorter gel consistency, but higher onset temperature and gelatinization enthalpy than the translucent flour. The results indicated that starch granule morphology would be more indicative than other attributions on pasting and gelatinization properties of chalky and translucent parts of rice grains. 相似文献
17.
《Industrial Crops and Products》2005,21(3):361-368
Starch based foams have been studied as replacements for non-degradable expanded polystyrene (EPS) as loose-fill packaging material because of starch’s total degradation and low cost. However, starch’s hydrophilicity, poor mechanical properties and dimensional stability limited their applications. Acetylated starch with a high degree of substitution (DS) is an alternative. Starch acetates with DS 1.11, 1.68, and 2.23 were extruded with either water or ethanol as solvents. The effects of DS and type of solvent on the starch acetate foam’s water absorption index (WAI), water solubility index (WSI), thermal behavior (glass transition temperature [Tg], melting temperature [Tm], and thermal decomposition temperature), and biodegradability were investigated. There was a significant interaction (P < 0.05) between solvent type and DS on WAI and WSI of the foams. As DS increased from 1.11 to 2.23, WAI and WSI increased when ethanol was used as solvent and decreased when water was used as solvent. The Tg values of starch decreased with acetylation and with increasing DS, but increased with extrusion. Acetylation and extrusion increased the thermal stability of the foams. The rate of biodegradation of the foams decreased with increasing DS. The foams, extruded with ethanol, had higher degradation rates than those with water. 相似文献
18.
Starch is a major component of rice grain and thus plays an important role in grain quality. For breeding rice with improved quality, the thermal and retrogradation properties of starch may be routinely measured. Since direct measurement is time-consuming and expensive, rapid predictive methods based on near-infrared spectroscopy (NIRS) can be applied to measure these quality parameters. In this study, calibration models for measurement of thermal and retrogradation properties were built from the spectra of grain and flour samples. The results indicated that both grain and flour spectra could give similar accuracy (r2=∼0.78) in determining the peak temperature (Tp) and conclusion temperature (Tc) of gelatinization. However, flour spectra (r2=0.80) were superior to the grain spectra (r2=0.73) in measuring onset temperature (To). Furthermore, the thermal properties of width at half peak height (ΔT1/2) and enthalpy of gelatinization (ΔHg), and retrogradation properties of enthalpy of retrogradation (ΔHr) and retrogradation percentage (R%) could only be successfully modeled with the flour spectra. The models reported in the present study are usable for routine screening of a large number of samples in early generation of selection in breeding programs. For accurate assay of the thermal and retrogradation properties, however, direct instrumental measurement should be employed in later generations. 相似文献
19.
Physicochemical, Structural and Textural Properties of Tortillas from Extruded Instant Corn Flour Supplemented with Various Types of Corn Lipids 总被引：1，自引：0，他引：1
Armbula-Villa G. Gonzlez-Hernndez J. Ordorica-Falomir C. A. 《Journal of Cereal Science》2001,33(3):245
The chemical composition and the components of corn grain affect the quality of tortillas produced from extruded instant corn flour (EICF). We have studied the effects of various types of corn lipids added at several concentrations to the regular raw corn flour before processing. The structural properties of flour, the effective moisture diffusion coefficient and the weight loss during cooking of fresh masa, as well as the textural characteristics of tortillas were analysed as a function of concentration and type of corn lipid added. The concentration of added lipid ranged from 0·5 to 2% (w/w). Each type and concentration of lipid was observed to have a different effect in the quality of masas and tortillas. Commercially it is desired to have tortillas with good properties and a high yield, that is, optimum weight transformation from corn to tortilla. From our analysis, the lowest dehydration rate (lowest effective moisture diffusion coefficient) and the best physicochemical and textural characteristics of fresh masas and tortillas were obtained from flour supplemented with 0·5% (w/w) of the nonpolar lipid fraction III. The loss in starch crystallinity due to the cooking process of masa into tortilla was similar in all treatments. 相似文献