首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Abstract

Development in surface mould growth on painted/unpainted wooden claddings and acting climatic factors were investigated over a period of 3 years. Eight wood substrates, including modified, preservative-treated and untreated wood, were tested in combination with three types of paint: (1) water-borne alkyd modified acrylic paint without fungicide; (2) solvent-borne alkyd paint without fungicide; and (3) ICP (internal comparison product). One set of samples was exposed unpainted. The samples were tested according to a modified version of EN 927-3. A logistic regression model was fitted to the data. The degree of mould growth varied with exposure time, coating typology, wood substrate, temperature and relative humidity. Exposure time and coating typology contributed most to the model. After 3 years of outdoor exposure unpainted panels and panels coated with solvent-borne paint without fungicide had more mould growth than panels coated with ICP and water-borne paint without fungicide. Unpainted oil/copper–organic preservative-treated claddings had higher resistance to mould growth than other unpainted wood substrates. Coated untreated pine and coated acetylated pine were more susceptible to mould growth than other coated wooden substrates.  相似文献   

2.
不同红松种源材质性状和生长性状的遗传变异   总被引：1，自引：0，他引：1  
在东北林业大学帽儿山实验林场,选择了26个17年生红松种源实验林作为研究对象,进行了木材材质性状和生长性状的调查。材质性状包括解剖学性状和物理学性状。解剖学性状测试指标包括,管胞长度、管胞直径和管胞壁腔比。物理学性状指标测定了:生长轮宽度、晚材率和生长轮密度。生长性状方面调查了树高和胸径。统计分析结果表明:各项材质性状和生长性状指标在种源间均存在着显著差异,同时证明各项材质性状均受一定的遗传效应控制;红松的生长性状指标在不同种源间也存在着较大的变异,红松的树高和胸径也受遗传效应的控制;但是,多数材质指标表现为一定的以经向为主的地理变异规律,而红松的生长性状指标如树高和胸径均呈现出一定的纬向变异规律,无经向变异规律。图2表5参6。  相似文献   

3.
ABSTRACT

Effects of climatic factors and material properties on the development of surface mould growth on wooden claddings were investigated in a laboratory experiment. Specimens of aspen (Populus tremula), Siberian larch (Larix Sibirica), American white oak (Querqus alba), Scots pine (Pinus sylvestris), Norway spruce (Picea abies) and thermally modified pine were incubated in eight climatic chambers at specified wetting periods (2 or 4?h per day), relative humidity (58–86%) and temperature conditions (10–27°C). Surface mould growth was assessed weekly for 13 weeks, and the results were evaluated statistically using Generalized Estimating Equations logistic regression models. All tested climatic factors had significant effects on the mould growth, and there were significant differences between the materials. The ranking of the materials varied with temperature and over time. Aspen, pine sapwood and oak were overall most susceptible to mould growth, and thermally modified pine least susceptible. There were significant differences between sapwood and heartwood for pine and spruce. The effect of density was tested on the spruce heartwood material, but was not found to be significant. The results can be used to further develop prediction models for mould growth on wooden claddings.  相似文献   

4.
Mould growth on coated wood is today a genuine challenge for house owners. Environmentally sound wooden facades with long service lives and acceptable appearance are desired. The objective in this study was to investigate the accumulated mould growth on 13 different wood substrates with 3 surface coating systems by identifying the factors that contribute to the variation and to predict future performance. A generalized linear mixed model was fit to the data with the analysis showing that coating and exposure time both had highly significant influences on mould growth. Further, wood substrate was significant, but comparatively less than coating and exposure time. A smaller coefficient for mould coverage in the beginning of the exposure period gave the panels with one of the coating systems, BAP, a delay in mould growth, and the extrapolated values for years 6–12 indicate a longer aesthetic service life than panels with the two other coating systems. Coated heartwood as wood type was less susceptible to mould growth than coated mixed wood and coated sapwood. Acetylated pine as wood substrate and aspen as wood species had lower resistance to mould growth than the other wood substrates and wood species, respectively.  相似文献   

5.
湿地松样本量大小对性状遗传力估算的影响   总被引：1，自引：0，他引：1       下载免费PDF全文
[目的]在保证遗传力估算精确度较高的前提下,探讨对已有湿地松测定群体遗传力评估最经济有效的调查取样数量(样本量),为遗传选择提供最佳的遗传参数和选择策略。[方法]以61个湿地松22年生半同胞家系的胸径、树高等生长性状和木材基本密度、弹性模量等材性性状测定值为试验数据,利用ASReml-R软件混合线性模型的限制性极大似然估计法(REML)估算各性状在不同参试样本量下的遗传力及其标准误。通过比较分析在不同样本量下各性状遗传力及其标准误估算值的收敛性,讨论样本量对性状遗传力估算的影响,进而确定各性状遗传力评估所需的最少样本量。[结果]对于61个湿地松自由授粉家系测定林,当测定的家系数少于39个或者随机测量的单株数小于600株时,估算的遗传力极不稳定,标准误偏大,随着样本容量或家系容量的增加其精度与准确性逐渐增加;遗传力较低的性状其遗传力估计所需样本量普遍大于遗传力较高的性状。[结论]对本研究的测定群体而言,要获得精确度较高的遗传力估算值,所需测定的湿地松家系数应该大于39个或者随机测量的单株数大于600株;由于材性性状遗传力相对较高,其需要测定的样本量可相对少一些。本文为大型用材树种遗传力估算提供了一个具有参考价值的实例研究,结果及相应的研究方法对于类似遗传测定群体遗传参数估算具有参考意义。  相似文献   

6.
The degradation of seven potential wood preservatives based on imidazolium compounds (ICs) and quaternary ammonium compounds (QACs) with a modified anion structure by mould fungi was determined using soil-block method. Experiments were carried out on Scots pine (Pinus sylvestris L.) wood. Two-phase titration and high-performance liquid chromatography (HPLC) method were used to detect and quantify the degradation products. The performed soil-block tests showed that the ICs and QACs with alkoxymethyl substituents were leached from the experimental wood when in contact with moist soil and revealed their fungal detoxification by mould fungi, especially by Gliocladium roseum. The degree of biological decomposition of new compounds was higher than didecyldimethylammonium chloride and didecylmethylpoli(oxyethyl)ammonium propionate. The observations of the colonization by mould fungi were made using the scanning electron microscope (SEM). Decay of treated wood by mould fungi showed its tolerance to QACs.  相似文献   

7.

This study demonstrates the correlation between stem form and compression wood content in 36 sampled trees from a 6-yr-old container grown Scots pine ( Pinus sylvestris L.) plantation in central Sweden. Root analyses were carried out to examine causes for the high incidences of basal sweep. On the sampled trees basal sweep, stem sweep and maximum bow-height were measured. Discs were cut at different heights and the compression wood content was analysed using digital image analysis. Pith eccentricity and out-of-roundness were calculated for each disc as well as per stem. Compression wood and pith eccentricity was most pronounced near the stem base, where sweep tends to be high. In general, pith eccentricity increased with degree of basal sweep. As a conclusion, expression of basal sweep can be used to predict compression wood content in young Scots pine trees. This study also shows the importance of anchoring of a tree to prevent basal sweep formation due to instability.  相似文献   

8.
[目的]评估Resistograph钻刺法间接测定尾叶桉×细叶桉木材密度的可靠性,检测杂交亲本对子代表型的效应以及生长与木材密度的相关,评选速生、优质的尾细桉杂种。[方法]基于10株尾叶桉与10株细叶桉不完全析因交配产生的56个杂交组合的7.5年生试验林,利用79株分析容积法与Resistograph钻刺法测定的木材密度的相关,通过方差分析检测亲本对杂种生长和木材密度的效应,结合多重比较和独立淘汰法进行材积和木材密度的联合选择。[结果]容积法与Resistograph钻刺法测定的木材密度的表型相关系数为0.52(P0.001),遗传相关系数为0.55(P0.05);树高、胸径及材积的母本间和父本间均呈极显著差异(P0.001或0.01),但母本×父本互作的效应不显著;对钻刺木材密度,父本间呈极显著差异(P0.001),母本×父本互作显著(P0.05),但母本间差异不显著;树高、胸径和材积间的表型相关和遗传相关均极显著(P0.001),其与钻刺木材密度的表型相关极显著(P0.001),但遗传相关不显著;评选出速生、木材密度较高的杂交组合14个、单株17株。[结论]Resistograph钻刺法是一种间接测定尾细桉木材密度的简便、经济和可靠的方法;母本和父本选择以及母本与父本的组配对培育速生、材质优良的尾细桉杂种均较重要;尾细桉生长与木材密度的遗传相关不显著,需要对这两类性状分别进行选择;评选的尾细桉杂交组合和单株为培育速生、优质的桉树良种提供了有用的材料。  相似文献   

9.
This study investigated whether the physiological condition of wood influenced patterns of colonization by mould and sapstain fungi. The extent of fungal defacement on sawn pine lumber Pinus nigra var. maritima that had been killed by gamma‐irradiation was compared with the defacement on untreated, still living timber that had been aged for up to 16 weeks prior to being sawn. All the sawn lumber was exposed to the natural inoculum of sapstain and mould fungi in a working sawmill environment over a 4‐week period. The results indicated that the pattern of fungal defacement differed markedly in dead or aged wood compared with untreated wood. Mould fungi were most prevalent on the dead irradiated wood, whereas sapstain fungi dominated the freshly sawn lumber which was still living. The differences appear to be independent of wood moisture content and may be related to the production of inhibitory compounds by living cells in wood as it becomes senescent and dies.  相似文献   

10.
[目的]研究广西国有东门林场25年生大花序桉种源生长与形质性状的遗传变异,筛选优良种源及单株,为大花序桉良种繁育及中大径材培育提供优质遗传材料。[方法]采用方差分析、构建性状选择指数方程综合分析等方法,对11个大花序桉种源进行生长与形质性状遗传变异分析及选择。[结果]表明:大花序桉胸径(DBH)、树高(H)、单株材积(V)、树干通直度(ST)和树干圆满度(SF)在种源间呈极显著差异;上述5个主要性状的种源遗传力(H2)为0.634 0.895,单株遗传力(h2)为0.136 0.342;以DBH、H、V、ST和SF 5个性状指标构建大花序桉种源/单株选择指数方程,按标准选择出4个优良种源和13株优良单株,优良种源平均材积遗传增益达11.2%,优良单株平均材积遗传增益达29.7%,选择效果尚好。[结论]大花序桉5个主要性状遗传变异在种源水平受中度至较强遗传控制,在单株水平受弱度遗传控制。优良种源D47、S14127、B47和S12195生长材性兼优,可用作培育优质中大径材。  相似文献   

11.
Abstract

Scots pine log specimens were given three different surface treatments and two different orientations of large cracks, and subjected to cyclic wetting and drying. Individual fitting of a mechanistic growth model was used to study the shape of absorption and accumulation curves and the final drying curve. Two parameters from this model (increase/decrease rate and maximum/minimum weight gain) were used for statistical analysis. The results indicate that wood tar results in less accumulated moisture over time than solvent-borne or water-borne coating or no treatment at all. An incipient attack by a white-rot fungus on parts of the material during storage affected water uptake greatly, often overriding surface treatment.  相似文献   

12.
Abstract

It is well established that acetylation of wood by the use of acetic anhydride is able to impart a significant degree of decay resistance. The aim of this work was to study how a standardized leaching procedure with water (EN 84) affected the degradation of acetic anhydride modified samples by the brown rot fungi Postia placenta compared to no leaching prior to incubation. Three different levels (low, medium, and high) of acetic anhydride modified Southern yellow pine (SYP; Pinus spp.) were tested. The samples were harvested after 4 and 28 weeks. We compared changes in mass loss, wood moisture content, fungal DNA, and gene expression from five genes. If leaching changes the acetylated samples and makes them more susceptible for fungal deterioration, the expected effect would be higher levels of these parameters. Generally, leaching resulted in few differences between leached and nonleached samples at low levels of acetylation, while no changes were found for the highest acetylation level. No differences were found in gene expressions after 28 weeks. The possible protection of acetylated wood against oxidative fungal degradation is suggested to be interpreted in combination with the lowered wood moisture content.  相似文献   

13.

Different classification systems for Norway spruce (Picea abies (L.) Karst.) pulpwood were compared. The classification systems were applied on truckloads or single logs in southern Sweden. Truckload classification according to mean annual growth ring width gave better separation of the wood properties basic density, juvenile wood and dry matter content, than classification according to harvest type (first thinning, later thinning or final felling). The assortments did not have significantly different wood brightness. Sorting at log level according to diameter, mean annual growth ring width or number of annual growth rings, which could be done at harvesting, did not drastically improve differentiation of the mean values of the wood properties or reduce variance compared to truckload classification. The variation in wood properties within assortments remained large owing to the large variation in wood properties between and within logs. Substantial reduction in dry matter variation could be achieved by truckload classification during the summer.  相似文献   

14.
Eight provenances of 19-year-oldPicea koraiensis Nakai from the provenance trials of Maoershan (45°20′N, 127°30′E), Liangshui (47°10′N, 128°53′E) and Jiagedaqi (50°24′N, 124°07′E) in Northeast China were investigated to analyze the genetic variation in growth characteristics (tree height and diameter) and wood characteristics (tracheid length, tracheid diameter, tracheid wall thickness, annual ring width as well as wood density). Great variation in height growth and breast height diameter growth was observed among the provenances, and along with the increase of tree age, these provenances presented different geographic adaptability. The growth characteristics ofPicea koraiensis stand at age of 10 in Maoershan and Liangshui provenance trials had a positive correlation with longitude, and with increase of tree age to 15 and 19, the tree growth of the provenances displayed a significant positive correlation with latitude as well as altitude. For wood characteristics, great variation was also found among the provenances. There exists a close relation between growth characteristics and wood properties of the provenance. The height and breast height diameter growth of the provenance had a positive correlation with tracheid diameter and annual ring width, and a negative correlation with tracheid wall thickness and wood density. Genetic performance of the provenance in all above characteristics was also investigated in order to provide more useful information for comprehensive selection of this species for pulpwood and plywood production. Foundation item: The paper was supported by National Key Project of The State Forestry Administration. (96-011-01-06) Biography: WANG Qiu-yu (1957-), female, professor in College of Life Sciences, Northeast Forestry University, Harbin 150040, P. R. China. Responsible editor: Song Funan  相似文献   

15.
北美鹅掌楸人工林生长规律及早期选择可行性探究   总被引：1，自引：0，他引：1       下载免费PDF全文
[目的]北美鹅掌楸为优良的珍贵用材树种,研究其生长发育规律及生长性状早晚期相关对于北美鹅掌楸人工林高效培育有重要的指导意义。[方法]本文利用树干解析的方法对江苏句容24年生的北美鹅掌楸人工林生长规律研究,并在此基础上进行胸径、树高和材积性状的年年相关分析以及早期选择效率评价。[结果]研究结果表明:北美鹅掌楸胸径、树高从6 a进入快速生长期,持续到17 a,而材积则在1 10 a增长缓慢,12 a后进入速生期,生长速率在20 a达到最大,22 a后逐渐降低,林分接近数量成熟。生长性状的年年相关及早期选择效率分析结果表明:胸径、树高在6 a与18 a显著相关,材积在6 a与16 a达到显著相关,且此时选择效率最高;若以24 a为伐期年龄早晚相关分析,胸径、材积在16 a与24 a生长量达到显著相关水平,而树高则为14 a。[结论]北美鹅掌楸胸径、树高早期增速较快,进入中壮龄阶段竞争加剧,个体间分化增大。随着林分年龄的增长,研究获得的早期选择年龄也相应地延迟。从加速育种角度,在6 a进行早期选择较为合理,而在培育大径材北美鹅掌楸方面可以16 a之后再进行疏伐选择。  相似文献   

16.
Specimens of Scots pine sapwood (Pinus sylvestris L.) and beech wood (Fagus sylvatica L.) were treated with an amino-alkyl-functional oligomeric siloxane, a sodium water glass solution and 1,3-dimethylol-4,5-dihydroxyethylene urea (DMDHEU). Treated and untreated wood specimens were exposed outdoors without ground contact. After 9?months of outside exposure, all specimens showed discolouration caused by infestations of mould and staining fungi on the exposed wood surface. Fungi grown on the sample surface were isolated and identified by microscopic technique and sequencing of PCR-amplified DNA from the ITS region. Primarily, an infestation by ascomycetes and related deuteromycetes was found. The most dominant fungi were Trichoderma sp. and Epicoccum sp.. An infestation of Aureobasidium pullulans was only detected on untreated and DMDHEU-treated samples. There were only marginal differences of fungal infestation between the two wood species.  相似文献   

17.
[目的]通过尾叶桉与赤桉杂种F1材质性状的遗传参数估算及其分析,为桉树杂交育种材性改良亲本选配和交配设计提供理论依据。[方法]以尾叶桉与赤桉6×6正反析因交配杂种F1测定林为材料,并以相应亲本自由授粉的半同胞子代作对照。9年生时,对各小区的杂种和家系(5株小区,6次重复)选取2株平均木,在胸高1. 3 m处沿南北向钻取木芯,共984个,测定木材基本密度、纤维长、纤维宽和纤维长宽比,利用ASReml-R估算4个材质指标的特殊配合力、杂种优势、父母本单株狭义遗传力、遗传相关和表型相关系数。[结果]表明:尾叶桉与赤桉正反交的杂种木材基本密度优于对照,呈明显的杂种优势;反交组合杂种其木材基本密度优于正交组合杂种,正交组合杂种的纤维特性优于反交组合的;在正交组合杂种中,木材基本密度、纤维长和纤维长宽比的母本效应低于父本效应;而反交组合杂种中,4个材质指标的母本效应均高于父本效应。木材基本密度和纤维特性指标受中至低遗传控制。正反交组合杂种中,除纤维长宽比外,其余3个材质指标的显性效应大于加性效应。对于遗传相关,杂种的木材基本密度与纤维宽呈极显著的负相关,与纤维长宽比呈极显著的正相关,与纤维长呈不显著负相关,纤维长与纤维宽呈显著正相关。对于表型相关,除纤维宽与纤维长宽比呈不显著正相关外,其余性状间均呈极显著正相关。[结论]尾叶桉与赤桉杂种的材质性状遗传差异因亲本和交配方式而异,表明通过种间杂交和正向选择进行材质性状的遗传改良具有潜力。  相似文献   

18.

A computer-based model for the evaluation of energy use in mechanized wood harvesting systems (EnergyCalc) was developed with aid of life cycle analysis methodologies. The system boundaries were determined "from stump to roadside" with wood volume over bark (m3) as the functional unit. The computer model (based on a database system) used a Visual Basic program, and the energy audit was based on fuel and oil consumption, and the energy consumed in the manufacture of the machines and replacement parts. The general scenario from the literature, results from Sweden and a preliminary study from Ireland are presented. In the overall energy audit of mechanized wood harvesting systems in Ireland, fuel consumption was the most significant item (82%), followed by oils (7%) and machine repairs and replacement (11%). The mean energy use from the data for Ireland was found to be 16% higher than the equivalent in Sweden (120 vs 103 MJ m?3). An energy reduction strategy that has the potential to reduce overall energy consumption for Irish systems by up to 13% was suggested.  相似文献   

19.
Application of near-infrared spectroscopy to wood discrimination   总被引：4，自引：0，他引：4  
 This study deals with a new nondestructive discriminant analysis by which wood can be classified on the basis of a combination of near-infrared (NIR) spectroscopy and Mahalanobis' generalized distance. Its accuracy and reasonability were examined for wood samples with various moisture contents ranging from oven-dried to a fully saturated free water state. In a discriminant analysis employing second derivative spectra, each wood group was well distinguished. Mahalanobis' generalized distances between softwoods are relatively independent of analytical pattern, whereas the distances between hardwoods are large for easy classification. There may be two reasons for selecting a wavelength: (1) when the chemical component of wood substance relates to the discriminant analysis; and (2) when the difference in moisture content with wood species relates to them. When we correctly construct the database of NIR spectra, confirming the purpose of the analysis, suitable wood discrimination should be possible. Received: January 23, 2002 / Accepted: March 15, 2002 Acknowledgment The authors sincerely thank the Tanabe Southeast Asia Nations Friendship Foundation for financial support. Part of this report was presented at the 51nd Annual Meeting of the Japan Wood Research Society, 2001 Correspondence to:S. Tsuchikawa  相似文献   

20.
Abstract

Genetic variation in wood density, microfibril angle (MFA), wood stiffness (MOE), height, diameter and volume was investigated in a 26-year-old Norway spruce [(Picea abies (L.) Karst.] clonal trial in southern Sweden. Wood quality measurements were performed on 10 mm increment cores using SilviScan. For MFA, mean values of annual rings showed the highest value (30°) at ring 2 counting from the pith, followed by a steep decrease and a gradual stabilization around ring 12 at approximately 14°. MOE showed a monotonic increase from 5 GPa to 14 GPa when moving from pith to bark. High broad-sense heritability values were found for wood density (0.48), MFA (0.41) and MOE (0.50). All growth traits displayed heritability values of similar magnitudes as reported in earlier studies. The generally high age–age correlations between different sections of the wood cores suggested that early selection for wood quality traits would be successful. Owing to unfavorable genetic correlations between volume and MOE, the correlated response indicated that selection for volume only at age 10 would result in a 0.27% decrease in weighted MOE at age 26 for every 1% increase in volume.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号