首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Abstract

Siberian larch (Larix sibirica Ledeb.) timber is suitable for many uses in the mechanical wood industry. Drying it without any decrease in value, however, is difficult and slow. The purpose of this research was to compare the drying quality of Siberian larch timber dried with three different conventional schedules taking into account the density and annual growth of wood. Five drying tests were performed. The final moisture content (MC), MC gradient, cracks, deformations (bow, crook, twist and cup) and case hardening were measured from the dried timber. The basic density particularly affected the MC, as shown in the differences regarding dried wood, with the denser wood having higher final MC and MC gradient. It was also found that large annual growth increased some deformations. Most of the measured factors were best after drying at the highest temperatures used; however, a slightly different trend was observed for bow, twist and cup. MC factors and twisting were the most problematic properties in drying according to this study. Sorting Siberian larch timber, particularly according to density, would improve the MC properties of dried timber by ensuring sufficient drying time, as economically as possible, for each timber piece.  相似文献   

2.
The relationship between the moisture content (MC) of wood blocks and the feeding activities of two Japanese subterranean termites, Coptotermes formosanus Shiraki and Reticulitermes speratus (Kolbe), was investigated with two choice tests. When three wood blocks with low MC (6%–12%), middle MC (79%–103%), and high MC (140%–182%) were exposed to workers of C. formosanus and R. speratus in a choice test, the feeding preferences were found in the middle MC blocks for C. formosanus, and the middle and high MC blocks for R. speratus, although wood blocks of low MC were also attacked. In a second choice test, wood blocks consisting of five pieces with water-impregnated (MC: 133%–191%) top, middle, or bottom piece were exposed to workers of both species. Higher consumptions were generally obtained in water-impregnated wood pieces and bottom pieces.  相似文献   

3.
Two experimental techniques were used to test the water permeability of two Korean hardwood species: diffuse porous Populus tomentiglandulosa T. Lee (eunsasi poplar) and ring porous white oak, Quercus serrata Thunb (konara oak). The first technique measured the void volume filled at different moisture content (MC) levels. Samples were treated with water via a schedule of full-cell impregnation. A significant relation between MC and permeability (the fractional void volume) was found. A reduction in liquid permeability was observed at MC above the fiber saturation point (FSP), whereas the opposite result was observed at MC below FSP due to the effect of the voids available in the wood. However, the differences of increased permeability from MC level 20% to 0% were found satistically the same in either wood species. The second technique measured the speed of liquid penetration in vessels, fibers, and rays with no application of external pressure. In this method, liquid flow was captured via video and the penetration speed was measured. Vessels, fibers, and rays in poplar were found to be more permeable than those in oak. Different anatomical factors such as cell diameter, cell length, pit number, pit aperture area, and thickness of the pit membrane seemed to be responsible for the variation of liquid flow rate in different cells of the two hardwood species.  相似文献   

4.

The wet-base moisture content (MC) in outer sapwood of Norway spruce (Picea abies (L.) Karst.) pulpwood in different wood management programmes from the forest to the mill was studied from the point of view of three objectives: (1) the importance of rapid raw material delivery, (2) the effect of bark condition as a result of harvesting during the late dormant season and the growing season, and (3) the possibilities for retaining the pulpwood MC using climate-adapted wet storage. The reduction in MC after felling was significant in the pulpwood stored without wet storage. When not wet-stored, pulpwood with a high degree of bark damage dried out more rapidly than wood with a low degree of bark loss. In pulpwood, wet-stored in accordance with climate-adaptation, the MC remained or increased during storage. The shorter the drying time before wet storage, i.e., faster delivery to the mill, the more significant the increase in MC. The increase in MC during wet storage was more significant in pulpwood with a low degree of bark damage. Climate-adapted wet storage reduced the variation of the MC. When conducted with fresh pulpwood, i.e., drying time shorter than 4 weeks (low bark loss) or 2 weeks (high bark loss), a more homogeneous MC distribution was gained.  相似文献   

5.
The drying kinetics of reaction woods in Picea abies (compression wood) and Fagus sylvatica (tension wood) in comparison with their corresponding normal woods was investigated under constant convective drying conditions. Moisture profiles along the thickness of small flat-sawn boards taken from reaction and opposite wood zones were evaluated using a polychromatic X-ray system, a non-destructive method. The results revealed substantial differences in the drying behavior between the reaction and opposite woods. Both reaction woods represented slower drying rate than their matching normal woods mainly during the period of free water loss. However, the reaction and opposite woods reached the final moisture content (MC) of about 12% at the same time due to higher initial MC in the opposite woods. In the case of reaction wood, it took a longer time for the moisture profile to become approximately uniform. Overall, a more striking difference was observed in the drying behavior of compression and opposite wood in P. abies. Some important anatomical differences like the cell and pit dimensions and their proportion give some explanations for these drying behaviors.  相似文献   

6.
Wood exhibits a pronounced time dependent deformation behavior which is usually split into ‘viscoelastic’ creep at constant moisture content (MC) and ‘mechano-sorptive’ creep in varying MC conditions. Experimental determination of model rheological parameters on a material level remains a serious challenge, and diversity of experimental methods makes published results difficult to compare. In this study, a cantilever experimental setup is proposed for creep tests because of its close analogy with the mechanical behavior of wood during drying. Creep measurements were conducted at different load levels (LL) under controlled temperature and humidity conditions. Radial specimens of white spruce wood [Picea glauca (Moench.) Voss.] with dimensions of 110 mm in length (R), 25 mm in width (T), and 7 mm in thickness (L) were used. The influence of LL and MC on creep behavior of wood was exhibited. In constant MC conditions, no significant difference was observed between creep of tensile and compressive faces of wood cantilever. For load not greater than 50% of the ultimate load, the material exhibited a linear viscoelastic creep behavior at the three equilibrium moisture contents considered in the study. The mechano-sorptive creep after the first sorption phase was several times greater than creep at constant moisture conditions. Experimental data were fitted with numerical simulation of the global rheological model developed by authors for rheological parameter identification.  相似文献   

7.
A standard X-ray source and an energy-sensitive detector were placed on both sides of a wood dryer which operates over a wide range of drying conditions. The spectrometric X-ray intensities transmitted through the wood sample were related to the mass concentration of wood and water using a rigorous calculation needed in the case of a polychromatic X-ray beam. The source and the detector are carried by a motion controller in order to scan the sample at different drying times and determine the moisture content (MC) profile along the board thickness. Treatment on spectrometric data and the evolution of the MC profiles in a Norway spruce board (Picea abies) are presented in this work.  相似文献   

8.
The effects of high temperature steam pretreatment on the change in wood moisture content (MC) and characteristics of vacuum drying were investigated in this study. Poplar and manchurian walnut woods were pretreated with high temperature steam at 100°C and 140°C, prior to vacuum drying. A comparison of the characteristics of vacuum drying between steam pretreated wood and untreated wood was carried out. The results show that during steam pretreatment, the MC of wood decreased within a few hours. The reduction of MC varied with the temperature; the higher the temperature, the faster the MC dropped. During the vacuum drying stage, the rates of drying of pretreated samples were higher than those of untreated samples when MC was below the fiber saturation point. Furthermore, the total drying time of samples treated at a steam temperature of 140°C was lower than that of untreated samples. Therefore, a vacuum procedure after steam pretreatment can effectively shorten the drying time when drying wood.  相似文献   

9.
In this work, a set-up with a device measuring the mass of wood packages is examined as an aid to estimate the average moisture content (MC) of wood packages. As the basic density needs to be presumed in the set-up, an estimator of the basic density as a function of log diameter is determined for Norway spruce (Picea abies (L.) Karst) and Scots pine (Pinus sylvestris). In total, 1920 specimens were collected at two different sawmills and analysed for this purpose. Specimens collected at the butt-end of pine had the greatest variation in basic density and it is recommended that they should be omitted when sawmills create their own functions for basic density estimation. Furthermore, the variation in basic density was shown to have the greatest impact on the estimated MC. A maximum error estimator of the MC became 14% at a MC of 70% and 9% at a MC of 10%. It was therefore concluded that the described method should not be used to estimate the MC of packages after drying but can serve as a valuable indicator of average green MC of a drying batch.  相似文献   

10.
To improve the accuracy of the new in-process moisture content (MC) monitoring concept under radiofrequency/vacuum (RF/V) drying, equilibrium moisture content (EMC) tests were carried out under various ambient pressures, and pressure curves in wood were analyzed during chamber evacuation and heating phases. The results showed that EMC increased with a decrease in ambient pressure regardless of temperature, relative humidity (RH), and species. The accuracy of MC estimation for Hinoki under RF/V drying was improved from 1.5% maximum absolute errors to 0.6% after EMC modification. The pressure curves for Hinoki and Sugi under RF/V drying showed similar tendencies to an idealized process. Russian larch showed different curves, indicating that the pressure in the wood did not reach the ambient pressure because of its low permeability. Therefore, MC could not be estimated using this monitoring concept because of the presence of much air in the wood of Russian larch.  相似文献   

11.
Microwave-vacuum (MV) drying characteristics of plantation Masson pine (Pinus massoniana) were studied experimen-tally for various levels of microwave radiation time, initial moisture content (MC), vacuum level and wood thickness. The results show that the process of MV drying for wood can be significantly divided into a short accelerating rate drying period, a long constant rate drying period and falling rate drying period, and the second drying period can extend to levels of mean MC below the fiber satu-r...  相似文献   

12.
 Steam conditioning of softwood boards after kiln drying is of critical importance for relief of residual drying stresses and to improve distribution of final moisture content. The conditioning practice in New Zealand includes two steps: immediately after high temperature (HT) drying the load is cooled until the core wood temperature is 75 to 90°C, and then the stack is steam conditioned for a period of 1 to 4 hours depending on the lumber thickness and moisture content after drying. In this work, experimental and theoretical studies were performed to better understand the conditioning process and to investigate factors which influence its effectiveness. In the experiment, 50 mm thick Pinus radiata sapwood boards were first dried at 120/70°C for 11, 12, 13, 16 and 18 hours, respectively, to varying moisture contents, and then cooled and steam conditioned for 1 hour. To assess the effectiveness of conditioning, moisture pick-up, moisture gradient, and transverse residual drying stress (indicated by cup and strain) were measured. It was found that drying wood to a low moisture content (below 6%) increased the conditioning effectiveness. A separate matched stack was conditioned for 4 hours after 13 hours drying which showed better results than 1 hour conditioning. A mathematical model for wood drying was extended to include both the cooling and conditioning phases. The model was numerically solved to examine the wood temperature and moisture content changes during the whole process of drying, cooling and final steam conditioning. Increase in wood temperature, moisture pickup and moisture gradient during steam conditioning were predicted and validated by the experimental data. This information is currently being used at the New Zealand Forest Research Institute in simulation of stress development and relief for drying of Pinus radiata lumber. Received 6 July 1998  相似文献   

13.
ABSTRACT

The estimation of the pixel-wise distribution of the moisture content (MC) in wood using X-ray computed tomography (CT) requires two scans of the same wood specimen at different MCs, one of which is known. Image-processing algorithms are needed to compensate for the anisotropic distortion that wood undergoes as it dries. An alternative technique based on dual-energy CT (DECT) to determine MC in wood has been suggested by several authors. The purpose of the present study was to evaluate the hypothesis that DECT can be used for the determination of MC in real time. A method based on the use of the quotient between the linear attenuation coefficients (μ) at different acceleration voltages (the so-called quotient method) was used. A statistical model was created to estimate the MC in solid sapwood of Scots pine, Norway spruce and brittle willow. The results show a regression model with R2?>?0.97 that can predict the MC in these species with a RMSE of prediction of 0.07, 0.04 and 0.11 (MC in decimal format) respectively and at MC levels ranging from the green to the totally dry condition. Individual measurements of MC show an uncertainty of up to ±0.4. It is concluded that under the conditions prevailing in this study, and in studies referred to in this paper, it is not possible to measure MC with DECT.  相似文献   

14.
Abstract

The aim of this study was to reveal some important physical properties of two lesser used wood species from Mozambique. Density of wood, green moisture content (MC), shrinkage, swelling, sorption–desorption behaviour and quantitative colour analyses were carried out to facilitate the potential use of Icuria dunensis (ncurri) and Pseudolachnostylis maprounaefolia (ntholo). The study found that the average densities at 12% MC were 907.1 kg m?3 for ncurri and 1023.4 kg m?3 for ntholo. The average values of green MC were 31.4% for ncurri and 39.2% for ntholo. Ncurri and ntholo wood showed low coefficients of anisotropy for heartwood, 1.3 and 1.4, respectively. The colour measurements described the patterns of radial and longitudinal variations in wood colour. In conclusion, ntholo and ncurri are characterized by high density and dimensional stability. Ntholo can be used where small dimensional changes are required, e.g. in joinery, flooring and furniture.  相似文献   

15.
将人工神经网络应用于木材干燥控制研究中,建立可用于木材含水率预测的时延神经网络基准模型,并给出其网络辨识结构。通过3个树种的实际干燥数据对所建立的网络模型进行训练和验证,仿真结果表明预测模型是可行而有效的,具有较好的动态跟踪能力和预报特性,实现了木材干燥基准的数学模型化,对进一步优化木材干燥基准实施与控制具有重要的指导意义和应用价值。  相似文献   

16.
Abstract

In this study, two different methods were used to produce thermally modified wood. One was carried out in a typical kiln drying chamber using superheated steam (SS) and the other used pressurized steam in an autoclave cylinder (PS). Overall, both processes followed the same principles and the wood was not treated with any chemicals. Two wood species were studied, Scots pine (Pinus sylvestris) and Norway spruce (Picea abies). Treatments in the autoclave were carried out under pressure using temperatures of 160°C, 170°C and 180°C. Temperatures of 190°C and 212°C were used in treatments in the chamber at normal air pressure. The colour was measured using L*C*H colour space. Results for both species showed that similar L* (lightness) can be reached at lower (20–30°C) temperatures using PS compared with SS treatment. The hue angle of PS-treated wood was smaller than that of SS-treated wood. No significant difference in C* (chroma) was detected. The difference in E value between PS- and SS-treated wood was smaller for Norway spruce than for Scots pine. The residual moisture content was about 10% higher in wood treated by the PS process compared with the SS process.  相似文献   

17.
Abstract

The aim of the present work was to examine an advanced image-processing algorithm for moisture content (mc) calculation and also to use this algorithm to analyse moisture loss data for low temperature drying. Since wood starts to shrink below the fibre saturation point during drying, the geometrical shape of the wood piece will change. The dry wood image was thoroughly transformed to the shape of the wet wood image prior to calculating the dry weight mc. The results show that the algorithm for the dry weight mc on density data from the CT-scanning during low-temperature drying in the climate chamber is a powerful tool for analysing the moisture loss inside the wood piece. This method can make it possible to get a higher quality on the product.  相似文献   

18.
鉴于百度试验法时木材干燥特性研究的不全面性,首先利用百度试验法开展了滇产黄毛青冈材干燥特性的初步研究,提出了预报干燥基础,再据此以地板坯料为干燥对象开展干燥工艺的试验研究,以全面归纳分析黄毛青网材的干燥特性。百度法研究表明：黄毛青冈材的初期开裂为4级,内裂为5级,截面变形1—3级,干燥速度为1-2级。地板料干燥工艺研究表明：采用研究提出的预报基准,23mm厚黄毛青冈地板坯料从初含水率52．3％干燥到12．9％,干燥周期为492h,但干燥质量达不到国家标准中对地板料干燥质量的要求,严重变形和过高的含水率偏差是此中主要原因。综合评定后认为,黄毛青冈属难干材,文中还就其干燥工艺的优化提出了建议。  相似文献   

19.
Abstract

In this study, water content in black spruce (Picea mariana Mill.) and aspen (Populus tremuloides Michx.) sapwood samples was investigated with time-domain magnetic resonance (MR). Time-domain MR measurements easily distinguish water in different environments in wood according to the spin-spin relaxation time and provide quantitative information on water content. The MR techniques employed can distinguish and quantify the individual signal components. Both black spruce and aspen have two signal components at moisture contents above the fiber saturation point. These two signal components correspond to motionally restricted water, often referred to as bound water, and unrestricted, or free water. Bound water content is constant above 40% moisture content. No signal from free water was detected at or below 20% moisture content in either species. We also demonstrate the use of a recently developed portable unilateral magnet that can be employed as a powerful tool in the study and measurement of water content in wood.  相似文献   

20.
对40 mm厚杉木锯材制定两个高温干燥工艺并进行试验研究,检测和分析干燥周期、干燥速率、锯材干燥质量等指标。干燥工艺I采用高温湿空气进行干燥;干燥工艺II在干燥前期高含水率阶段采用过热蒸汽条件,干燥后期低含水率阶段采用高温湿空气进行干燥。结果显示:两个干燥工艺在各阶段的干燥速率差异明显,干燥前期工艺II的干燥速率为1.30%/h,较工艺I低约37.2%;但干燥后期工艺II的干燥速率为1.89%/h,较工艺I高约70.27%。干燥工艺II可以有效避免锯材内裂的发生,干燥质量满足GB/T 6491—2012《锯材干燥质量》二级材的指标要求,干燥效率提高。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号