首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 46 毫秒
1.
A series of half-diallel crosses involving early, medium and late maturity desi and kabuli type chickpea (Cicer arietinum L.) genotypes with stable resistance to Helicoverpa pod borer, along with the parents, were evaluated at two locations in India to understand the inheritance of pod borer resistance and grain yield. Inheritance of resistance to pod borer and grain yield was different in desi and kabuli types. In desi type chickpea, the additive component of genetic variance was important in early maturity and dominance component was predominant in medium maturity group, while in the late maturity group, additive as well as dominance components were equally important in the inheritance of pod borer resistance. Both dominant and recessive genes conferring pod borer resistance seemed equally frequent in the desi type parental lines of medium maturity group. However, dominant genes were in overall excess in the parents of early and late maturity groups. In the kabuli medium maturity group, parents appeared to be genetically similar, possibly due to dispersion of genes conferring pod borer resistance and susceptibility, while their F1s were significantly different for pod borer damage. The association of genes conferring pod borer resistance and susceptibility in the parents could be attributed to the similarity of parents as well as their F1s for pod borer damage in kabuli early and late maturity groups. Grain yield was predominantly under the control of dominant gene action irrespective of the maturity groups in desi chickpea. In all the maturity groups, dominant and recessive genes were in equal frequency among the desi parental lines. Dominant genes, which tend to increase or decrease grain yield are more or less present in equal frequency in parents of the early maturity group, while in medium and late maturity groups, they were comparatively in unequal frequency in desi type. Unlike in desi chickpea, differential patterns of genetic components were observed in kabuli chickpea. While the dominant genetic component was important in early and late maturity group, additive gene action was involved in the inheritance of grain yield in medium duration group in kabuli chickpea. The dominant and recessive genes controlling grain yield are asymmetrically distributed in early and medium maturity groups in kabuli chickpea. The implications of the inheritance pattern of pod borer resistance and grain yield are discussed in the context of strategies to enhance pod borer resistance and grain yield in desi and kabuli chickpea cultivars.  相似文献   

2.
Chickpea (Cicer arietinum L.) is a dry season food legume largely grown on residual soil moisture after the rainy season. The crop often experiences moisture stress towards end of the crop season (terminal drought). The crop may also face heat stress at the reproductive stage if sowing is delayed. The breeding approaches for improving adaptation to these stresses include the development of varieties with early maturity and enhanced abiotic stress tolerance. Several varieties with improved drought tolerance have been developed by selecting for grain yield under moisture stress conditions. Similarly, selection for pod set in the crop subjected to heat stress during reproductive stage has helped in the development of heat‐tolerant varieties. A genomic region, called QTL‐hotspot, controlling several drought tolerance‐related traits has been introgressed into several popular cultivars using marker‐assisted backcrossing (MABC), and introgression lines giving significantly higher yield than the popular cultivars have been identified. Multiparent advanced generation intercross (MAGIC) approach has been found promising in enhancing genetic recombination and developing lines with enhanced tolerance to terminal drought and heat stresses.  相似文献   

3.
Summary Breeding for resistance to biotic and abiotic stresses of global importance in common bean is reviewed with emphasis on development and application of marker-assisted selection (MAS). The implementation and adoption of MAS in breeding for disease resistance is advanced compared to the implementation of MAS for insect and abiotic stress resistance. Highlighted examples of breeding in common bean using molecular markers reveal the role and success of MAS in gene pyramiding, rapidly deploying resistance genes via marker-assisted backcrossing, enabling simpler detection and selection of resistance genes in absence of the pathogen, and contributing to simplified breeding of complex traits by detection and indirect selection of quantitative trait loci (QTL) with major effects. The current status of MAS in breeding for resistance to angular leaf spot, anthracnose, Bean common mosaic and Bean common mosaic necrosis viruses, Beet curly top virus, Bean golden yellow mosaic virus, common bacterial blight, halo bacterial blight, rust, root rots, and white mold is reviewed in detail. Cumulative mapping of disease resistance traits has revealed new resistance gene clusters while adding to others, and reinforces the co-location of QTL conditioning resistance with specific resistance genes and defense-related genes. Breeding for resistance to insect pests is updated for bean pod weevil (Apion), bruchid seed weevils, leafhopper, thrips, bean fly, and whitefly, including the use of arcelin proteins as selectable markers for resistance to bruchid seed weevils. Breeding for resistance to abiotic stresses concentrates on drought, low soil phosphorus, and improved symbiotic nitrogen fixation. The combination of root growth and morphology traits, phosphorus uptake mechanisms, root acid exudation, and other traits in alleviating phosphorus deficiency, and identification of numerous QTL of relatively minor effect associated with each trait, reveals the complexity to be addressed in breeding for abiotic stress resistance in common bean.  相似文献   

4.
The effect of terminal drought on the dry matter production, seed yield and its components including pod production and pod abortion was investigated in chickpea (Cicer arietinum L.). Two desi (with small, angular and dark brown seeds) and two kabuli (with large, rounded and light coloured seeds) chickpea cultivars differing in seed size were grown in a controlled-temperature greenhouse, and water stress was applied by withholding irrigation 1 (early podding water stress, ES), 2 (mid-podding water stress, MS) or 3 (late-podding water stress, LS) weeks after the commencement of pod set. In addition, the pod and seed growth of well-watered plants was followed for the first 19 days after pod set. Growth of the pod wall followed a sigmoid pattern and was faster in the desi than in the kabuli cultivars, while no difference was found in early seed growth among genotypes. Time of pod set affected the yield components in all treatments with the late-initiated pods being smaller, having fewer seeds per pod and smaller seeds, but no significant difference between pods initiated on the same day on the primary and secondary branches was observed. Early stress affected biomass and seed yield more severely than the later stresses, and in all stress treatments secondary branches were more affected than primary ones. Pod production was more affected by early stress than by late stress, regardless of cultivar. Pod abortion was more severe in the kabuli than in the desi cultivars, but final seed size per se did not appear to be a determinant of pod abortion under terminal drought conditions. The data indicated that the production and viability of pods was affected as soon as water deficits began to develop. The results show that pod abortion is one of the key traits impacting on seed yield in chickpeas exposed to terminal drought and that irrespective of differences in phenology, kabuli types have greater pod abortion than desi types when water deficits develop shortly after first pod set.  相似文献   

5.
基于作物QTL的分子育种研究进展   总被引:6,自引:0,他引:6  
分子标记技术和QTL(Quantitative Traits Loci)定位技术的迅速发展,使得以DNA多态性为基础的分子育种技术的研究不断深入,并在作物遗传育种中得到了一些成功的运用,为解决有关复杂性状的选择问题带来了希望。本文综述了近年来基于作物QTL的分子标记辅助选择及目标性状QTL克隆在作物的产量、品质、抗旱性等数量性状遗传育种中的主要应用,证实了分子育种的有效性;对目前影响分子育种效率的因素及存在的问题、应用前景进行了探讨。  相似文献   

6.
Modifying plant architecture is considered a promising breeding option to enhance crop productivity. Modern chickpea (Cicer arietinum L.) cultivars with either compound (wild‐type) or simple leaf shapes are commercially grown but the relationships between leaf shape and yield are not well understood. In this study, a random sample of ‘Kabuli’ type progeny lines of both leaf types, derived from two crosses between modern American simple leaf cultivars and early‐flowering wild‐type breeding lines, were planted at different sowing densities. Leaf area development and final grain yield in genotypes of the two leaf types responded differently to changes in sowing densities. Compound leaf lines attained higher leaf area indices and higher grain yields at both low and high sowing densities. Yield responses of the simple leaf lines to increasing sowing density were significantly higher compared to compound leaf genotypes in two of three field experiments. The prospects for utilizing the simple leaf trait as a breeding target for short‐season growing areas are discussed.  相似文献   

7.
Chickpea (Cicer arietinum L.) production has remained static for the past two decades. One major limiting factor has been susceptibility of cultivars to several biotic and abiotic stresses that adversely affect yield. In recent years, cultivars resistant to Ascochyta blight (Ascochyta rabiei [Pass.] Lab.), Fusarium wilt (Fusarium oxysporum f. sp. ciceris), and cold have been bred and released in many countries. Some progress has been made in breeding for resistance to drought, insects, and cyst nematode, but not for viruses, heat, and salinity. Two or more stresses are of equal importance in most chickpea growing areas. Therefore, future efforts should be directed toward the development of cultivars with multiple-stress resistance. Proper understanding of important stresses in different countries and the genetics of resistance should lead to more systematic approaches to resistance breeding. Wild Cicer species hold promise and deserve attention in resistance breeding.  相似文献   

8.
Chickpea (Cicer arietinum L.) is cultivated mostly in the arid and semi‐arid regions of the world. Climate change will bring new production scenarios as the entire growing area in Indo–Pak subcontinent, major producing area of chickpea, is expected to undergo ecological change, warranting strategic planning for crop breeding and husbandry. Conventional breeding has produced several high‐yielding chickpea genotypes without exploiting its potential yield owing to a number of constraints. Among these, abiotic stresses include drought, salinity, water logging, high temperature and chilling frequently limit growth and productivity of chickpea. The genetic complexity of these abiotic stresses and lack of proper screening techniques and phenotyping techniques and genotype‐by‐environment interaction have further jeopardized the breeding programme of chickpea. Therefore, considering all dispiriting aspects of abiotic stresses, the scientists have to understand the knowledge gap involving the physiological, biochemical and molecular complex network of abiotic stresses mechanism. Above all emerging ‘omics’ approaches will lead the breeders to mine the ‘treasuring genes’ from wild donors and tailor a genotype harbouring ‘climate resilient’ genes to mitigate the challenges in chickpea production.  相似文献   

9.
Using CROPGRO-Chickpea model (revised version), we investigated the impacts of climate change on the productivity of chickpea (Cicer arietinum L.) at selected sites in South Asia (Hisar, Indore and Nandhyal in India and Zaloke in Myanmar) and East Africa (Debre Zeit in Ethiopia, Kabete in Kenya and Ukiriguru in Tanzania). We also investigated the potential benefits of incorporating drought and heat tolerance traits in chickpea using the chickpea model and the virtual cultivars approach. As compared to the baseline climate, the climate change by 2050 (including CO2) increased the yield of chickpea by 17% both at Hisar and Indore, 18% at Zaloke, 25% at Debre Zeit and 18% at Kabete; whereas the yields decreased by 16% at Nandhyal and 7% at Ukiriguru. The yield benefit due to increased CO2 by 2050 ranged from 7 to 20% across sites as compared to the yields under current atmospheric CO2 concentration; while the changes in temperature and rainfall had either positive or negative impact on yield at the sites. Yield potential traits (maximum leaf photosynthesis rate, partitioning of daily growth to pods and seed-filling duration each increased by 10%) increased the yield of virtual cultivars up to 12%. Yield benefit due to drought tolerance across sites was up to 22% under both baseline and climate change scenarios. Heat tolerance increased the yield of chickpea up to 9% at Hisar and Indore under baseline climate, and up to 13% at Hisar, Indore, Nandhyal and Ukiriguru under climate change. At other sites (Zaloke, Debre Zeit and Kabete) the incorporation of heat tolerance under climate change had no beneficial effect on yield. Considering varied crop responses to each plant trait across sites, this study was useful in prioritizing the plant traits for location-specific breeding of chickpea cultivars for higher yields under climate change at the selected sites in South Asia and East Africa.  相似文献   

10.
Two field experiments were carried out to investigate the effects of terminal drought on chickpea grown under water-limited conditions in the Mediterranean-climatic region of Western Australia. In the first experiment, five desi (small angular seeds) chickpeas and one kabuli (large round seeds) chickpea were grown in the field with and without irrigation after flowering. In the second experiment, two desi and two kabuli cultivars were grown in the field with either irrigation or under a rainout shelter during pod filling. Leaf water potential (Ψl), dry matter partitioning after pod set and yield components were measured in both experiments while growth before pod set, photosynthesis, pod water potential and leaf osmotic adjustment were measured in the first experiment only.

In the first experiment, total dry matter accumulation, water use, both in the pre- and post-podding phases, Ψl and photosynthesis did not vary among genotypes. In the rainfed plants, Ψl decreased below −3 MPa while photosynthesis decreased to about a tenth of its maximum at the start of seed filling. Osmotic adjustment varied significantly among genotypes. Although flowering commenced from about 100 days after sowing (DAS) in both experiments, pod set was delayed until 130–135 DAS in the first experiment, but started at 107 DAS in the second experiment. Water shortage reduced seed yield by 50 to 80%, due to a reduction in seed number and seed size. Apparent redistribution of stem and leaf dry matter during pod filling varied from 0 to 60% among genotypes, and suggests that this characteristic may be important for a high harvest index and seed yield in chickpea.  相似文献   


11.
Chickpea (Cicer arietinum L.) is an important legume crop as a protein source across the world. It is mostly grown on arid and marginal lands where it faces drought stress at different growth stages. Drought stress exerts drastic effects on nutrient uptake, hinders the nodule formation and adversely affects yield and yield components. Generally drought at any growth stage and organizational level is responsible for reduction in economic yield. Significant variability in chickpea germplasm is present on the basis of responses to drought stress in the form of drought escape, drought avoidance and drought tolerance; these mechanisms prevent chickpea crop from harmful effects of drought. Improvement in chickpea germplasm against drought stress could be made by using several breeding approaches, that is introduction, hybridization, mutation breeding, marker‐assisted breeding and omic techniques. These breeding approaches, especially marker‐assisted breeding and omics, are further strengthened with the availability of the chickpea genome sequence. This review highlighted the significance, status and advances in different breeding strategies for improvement of drought tolerance in chickpea.  相似文献   

12.
Chickpea (Cicer arietinum L.) is known to be salt-sensitive and in many regions of the world its yields are restricted by salinity. Recent identification of large variation in chickpea yield under salinity, if genetically controlled, offers an opportunity to develop cultivars with improved salt tolerance. Two chickpea land races, ICC 6263 (salt sensitive) and ICC 1431 (salt tolerant), were inter-crossed to study gene action involved in different agronomic traits under saline and control conditions. The generation mean analysis in six populations, viz. P1, P2, F1, F2, BC1P1 and BC1P2, revealed significant gene interactions for days to flowering, days to maturity, and stem Na and K concentrations in control and saline treatments, as well as for 100-seed weight under salinity. Seed yield, pods per plant, seeds per plant, and stem Cl concentration were controlled by additive effects under saline conditions. Broad-sense heritability values (>0.5) for most traits were generally higher in saline than in control conditions, whereas the narrow-sense heritability values for yield traits, and stem Na and K concentrations, were lower in saline than control conditions. The influence of the sensitive parent was higher on the expression of different traits; the additive and dominant genes acted in opposite directions which led to lower heritability estimates in early generations. These results indicate that selection for yield under salinity would be more effective in later filial generations after gene fixation.  相似文献   

13.
Water deficit imposed by either drought or salinity brings about severe growth retardation and yield loss of crops. Since Brassica crops are important contributors to total oilseed production, it is urgently needed to develop tolerant cultivars to ensure yields under such adverse conditions. There are various physiochemical mechanisms for dealing with drought and salinity in plants at different developmental stages. Accordingly, different indicators of tolerance to drought or salinity at the germination, seedling, flowering and mature stages have been developed and used for germplasm screening and selection in breeding practices. Classical genetic and modern genomic approaches coupled with precise phenotyping have boosted the unravelling of genes and metabolic pathways conferring drought or salt tolerance in crops. QTL mapping of drought and salt tolerance has provided several dozen target QTLs in Brassica and the closely related Arabidopsis. Many drought- or salt-tolerant genes have also been isolated, some of which have been confirmed to have great potential for genetic improvement of plant tolerance. It has been suggested that molecular breeding approaches, such as marker-assisted selection and gene transformation, that will enhance oil product security under a changing climate be integrated in the development of drought- and salt-tolerant Brassica crops.  相似文献   

14.
D. J. Bonfil    O. Goren    I. Mufradi    J. Lichtenzveig    S. Abbo 《Plant Breeding》2007,126(2):125-129
Terminal drought is a major constraint to chickpea (Cicer arietinum L.) production. Autumn sowing and early flowering have been suggested as ways to benefit from the winter rains in short rainy seasons under dryland cropping. High‐yielding, late‐flowering, simple‐leafed (slv/slv) chickpea cultivars with good field resistance to Ascochyta blight have been bred recently. Changing plant architecture, by altering leaf shape, may affect agronomic performance. As no information is available on the effect of leaf shape on phenology and seed yield, this study was aimed at: (i) introducing the simple leaf trait into an early‐flowering chickpea background; (ii) comparing the grain yield of the two leaf types in early vs. late flowering backgrounds and (iii) producing breeding lines combining early flowering, large seeds and Ascochyta tolerance with both leaf types. Hybrid progeny were studied from the cross of ‘Sanford’ (slv/slv) and ICC7344, (compound, SLV/SLV). Four early‐podding, F8 breeding lines were selected with either simple or compound leaves. In three different field experiments under dryland conditions (334–379 mm), they yielded ca. 1.4 t/ha as compared with 1.0 t/ha in the standard Israeli ‘Yarden’ on one site, but no significant differences in yield were obtained in the other two experiments.  相似文献   

15.
Extensive and deep root systems have been recognized as one of the most important traits for improving chickpea (Cicer arietinum L.) productivity under progressively receding soil moisture conditions. However, available information on the range of variation for root traits is still limited. Genetic variability for the root traits was investigated using a cylinder culture system during two consecutive growth seasons in the mini-core germplasm collection of ICRISAT plus several wild relatives of chickpea. The largest genetic variability was observed at 35 days after sowing for root length density (RLD) (heritability, h 2 = 0.51 and 0.54) across seasons, and followed by the ratio of plant dry weight to root length density with h 2 of 0.37 and 0.50 for first and second season, respectively. The root growth of chickpea wild relatives was relatively poor compared to C. arietinum, except in case of C. reticulatum. An outstanding genotype, ICC 8261, which had the largest RLD and one of the deepest root system, was identified in chickpea mini-core germplasm collection. The accession ICC 4958 which was previously characterized as a source for drought avoidance in chickpea was confirmed as one with the most prolific and deep root system, although many superior accessions were also identified. The chickpea landraces collected from the Mediterranean and the west Asian region showed a significantly larger RLD than those from the south Asian region. In addition, the landraces originating from central Asia (former Soviet Union), characterized by arid agro-climatic conditions, also showed relatively larger RLD. As these regions are under-represented in the chickpea collection, they might be interesting areas for further germplasm exploration to identify new landraces with large RLD. The information on the genetic variability of chickpea root traits provides valuable baseline knowledge for further progress on the selection and breeding for drought avoidance root traits in chickpea.  相似文献   

16.
水、旱稻根基粗和抗旱系数QTL的标记辅助选择及验证   总被引:3,自引:1,他引:3  
利用水、旱稻杂交、回交所产生的4个分离群体对RIL群体定位到的抗旱相关的根基粗、抗旱系数2个QTL进行了选择验证。结果表明,根基粗、抗旱系数QTL的两侧标记在不同群体、不同的遗传背景中遗传稳定。在旱田种植条件下,YIBC1、JIBC1、JIF2 3个分离群体携带有根基粗QTL brt4.1两侧标记有利等位基因的个体与没有携带brt4.1两侧  相似文献   

17.
Early-maturity helps chickpea to avoid terminal heat and drought and increases its adaptation especially in the sub-tropics. Breeding for early-maturing, high-yielding and broad-based cultivars requires diverse sources of early-maturity. Twenty-eight early-maturing chickpea germplasm lines representing wide geographical diversity were identified using core collection approach and evaluated with four control cultivars in five environments for 7 qualitative and 16 quantitative traits at ICRISAT Center, Patancheru, India. Significant genotypic variance was observed for days to flowering and maturity in all the environments indicating scope for selection. Genotypes × environment interactions were significant for days to flowering and maturity and eight other agronomic traits. ICC 16641, ICC 16644, ICC 11040, ICC 11180, and ICC 12424 were very early-maturing, similar to or earlier than control cultivars Harigantars and ICCV 2. The early-maturing accessions produced on average 22.8% more seed yield than the mean of four control cultivars in the test environments. ICC 14648, ICC 16641 and ICC 16644 had higher 100-seed weight than control cultivars, Annigeri and ICCV 2. Cluster analysis delineated three clusters, which differed significantly for all the traits. First cluster comprised three controls, ICCV 96029, Harigantars, ICCV 2 and two germplasm lines, ICC 16644 and ICC 16641, second cluster comprised 13 germplasm lines and control cultivar Annigeri, and third cluster comprised 13 germplasm lines. Maturity was main basis of delineation of the first cluster from others. Plot yield and its associated traits were the main basis for delineation of the second cluster from the others. Identification of these diverse early-maturing lines would be useful in breeding broad-based, early-maturing and high-yielding cultivars.  相似文献   

18.
Inoculation of grain legumes with rhizobia may improve biological N2 fixation and crop yield. However, drought, high temperature and soil salinity constrain legume root-nodule formation and function. Here, two rhizobial strains nodulating Tunisian chickpea, Mesorhizobium ciceri strain CMG 6 and Mesorhizobium mediterraneum strain CTM 226 originating from semi-arid regions, were selected for their symbiotic performance and their salt stress tolerance (3 % NaCl). Both strains were then examined as inoculants in different soils and field conditions. Field experiments were conducted in four sites using four chickpea cultivars. Rhizobia occupying nodules in non-inoculated plots were isolated and characterized using 16S rDNA typing; to examine nodule occupancy by the inoculant strains we used polymerase chain reaction (PCR)-restriction fragment length polymorphism of 16S rDNA gene and repetitive extragenic palindromic PCR. The inoculant strains gave a significant increase in nodule number, shoot dry weight and grain yield in all the experimented fields for the four cultivars used, even in the non-irrigated soils. The improvement in plant production was equal to or better than nitrogen fertilization. Moreover, the monitoring of the nodule occupancy showed that inoculant strains competed well in the native populations of rhizobia. These results suggest that nodulation and yield of chickpea can be improved by inoculation with competitive and salt-tolerant rhizobia and is economically promising to increase chickpea production in water-limited regions.  相似文献   

19.
Tepary bean (Phaseolus acutifolius A. Gray) is a relatively higher drought-tolerant crop than common bean (P. vulgaris), serving as genetic resource for food and genetic enhancement of related legumes. Tepary bean production is hampered by cultivation of low yielding and abiotic stress-susceptible cultivars. Targeted selection of agronomic, physiological and biochemical traits that maximizes yield gains using Phaseolus gene pool is useful to develop stress-tolerant and high-performing genotypes. The objective of this review is to provide breeding progress made regarding tepary bean improvement for drought adaptation. Agronomic, physiological and biochemical traits utilized for selection of drought-tolerant genotypes are highlighted. Genetic and genomic resources developed for tepary bean or closely related species such as common bean useful for genetic analysis and breeding are discussed. Opportunities and challenges to facilitate breeding of tepary bean genotypes with improved abiotic stress adaptation are highlighted. This will enable development of drought-tolerant tepary bean genotypes targeting selection of agronomic, physiological and biochemical traits. Use of genetically related and complementary Phaseolus species and marker-assisted selection method is key to developing drought-tolerant genotypes.  相似文献   

20.
分年代系统地总结了我国黄淮冬麦区2000-2017年旱地冬小麦区域试验233份参试材料共339次试验的产量变化差异,分析比对区域试验对照品种、参试品系产量差异和遗传变异情况,提出了“3年1小旱,5年1大旱”的气候特点是旱地小麦品种选育和产量水平均衡提高的严重障碍,适于较强干旱条件下的抗旱品种、节水节雨品种和优质强筋品种的选育是我国黄淮冬麦区旱地小麦育种当前和今后的主要发展方向。探讨了我国黄淮旱地冬小麦区域试验参试品系和通过国审育成品种产量潜力、变异范围、品质类型等方面的进展和育种研究中存在的问题。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号