共查询到20条相似文献，搜索用时 540 毫秒
1.
F. E. Dowell E. B. Maghirang R. O. Pierce G. L. Lookhart S. R. Bean F. Xie M. S. Caley J. D. Wilson B. W. Seabourn M. S. Ram S. H. Park O. K. Chung 《Cereal Chemistry》2008,85(1):82-91
This study measured the relationship between bread quality and 49 hard red spring (HRS) or 48 hard red winter (HRW) grain, flour, and dough quality characteristics. The estimated bread quality attributes included loaf volume, bake mix time, bake water absorption, and crumb grain score. The best‐fit models for loaf volume, bake mix time, and water absorption had R2 values of 0.78–0.93 with five to eight variables. Crumb grain score was not well estimated, and had R2 values ≈0.60. For loaf volume models, grain or flour protein content was the most important parameter included. Bake water absorption was best estimated when using mixograph water absorption, and flour or grain protein content. Bake water absorption models could generally be improved by including farinograph, mixograph, or alveograph measurements. Bake mix time was estimated best when using mixograph mix time, and models could be improved by including glutenin data. When the data set was divided into calibration and prediction sets, the loaf volume and bake mix time models still looked promising for screening samples. When including only variables that could be rapidly measured (protein content, test weight, single kernel moisture content, single kernel diameter, single kernel hardness, bulk moisture content, and dark hard and vitreous kernels), only loaf volume could be predicted with accuracies adequate for screening samples. 相似文献
2.
The objective of this study was to determine the effects of flour type, baking absorption, variation in sheeting, and dough proofing time on the density, crumb grain (visual texture), and mechanical properties (physical texture) of bread crumb. All response variables were measured on the same bread crumb specimens. Bread loaves were prepared by a short‐time bread‐making process using four spring wheat flours of varying strength. After crumb density measurement, digital image analysis (DIA) was used to determine crumb grain properties including crumb brightness, cell size, cell wall thickness, and crumb uniformity. Tensile tests were performed on bone‐shaped specimens cut from the same bread slices used for DIA to obtain values for Young's modulus, fracture stress, fracture strain, and fracture energy. Proof time had the most profound influence on the bread with substantial effects on loaf volume, crumb density, crumb brightness, and grain, as well as crumb mechanical properties. Increasing proof time resulted in higher loaf volume, lower crumb density and brightness, coarser crumb with fewer and larger cells with thicker cell walls, and weaker crumb tensile properties. Varying flour type also led to significant differences in most of the measured crumb parameters that appeared to correspond to differences in gluten strength among the flour samples. With increasing flour strength, there was a clear trend to increasing loaf volume, finer and more uniform crumb grain, and stronger and more extensible bread crumb. Increasing baking absorption had virtually no effect on crumb structure but significantly weakened crumb strength and increased fracture strain. In contrast, varying the number of sheeting passes had a minor effect on crumb cellular structure but no effect on mechanical properties. The experimental data were consistent with a cause‐effect relationship between flour strength and the tensile strength of bread crumb arising as a result of stronger flours exhibiting greater resistance to gas cell coalescence, thereby having fewer crumb defects. 相似文献
3.
Measurements of creep‐recovery of flour‐water doughs were made using a dynamic mechanical analyzer (DMA) in a compression mode with an applied probe force of 50 mN. A series of wheat flour and blend samples with various breadmaking potentials were tested at a fixed water absorption of 54% and farinograph optimum water absorption, respectively. The flour‐water doughs exhibited a typical creep‐recovery behavior of a noncross‐linked viscoelastic material varying in some parameters with flour properties. The maximum recovery strain of doughs with a fixed water absorption of 54% was highly correlated (r = 0.939) to bread loaf volume. Wheat flours with a large bread volume exhibited greater dough recovery strain. However, there was no correlation (r = 0.122) between maximum creep strain and baking volume. The maximum recovery strain of flour‐water doughs also was correlated to some of the parameters provided by mixograph, farinograph, and TA‐XT2 extension. 相似文献
4.
We used modified wheat starches in gluten-starch flour models to study the role of starch in bread making. Incorporation of hydroxypropylated starch in the recipe reduced loaf volume and initial crumb firmness and increased crumb gas cell size. Firming rate and firmness after storage increased for loaves containing the least hydroxypropylated starch. Inclusion of cross-linked starch had little effect on loaf volume or crumb structure but increased crumb firmness. The firming rate was mostly similar to that of control samples. Presumably, the moment and extent of starch gelatinization and the concomitant water migration influence the structure formation during baking. Initial bread firmness seems determined by the rigidity of the gelatinized granules and leached amylose. Amylopectin retrogradation and strengthening of a long-range network by intensifying the inter- and intramolecular starch-starch and possibly also starch-gluten interactions (presumably because of water incorporation in retrograded amylopectin crystallites) play an important role in firming. 相似文献
5.
We examined the effects of baking time and temperature for the preparation of par‐baked French bread, and of thawing and second baking conditions on the characteristics of bread prepared from par‐baked bread. Par‐baked French bread with loaf volume and crumb structure comparable to fully baked bread (control) was obtained with ≥6 min baking at 218°C, which increased the crumb temperature to 97°C. Freezing, thawing, and second baking of par‐baked bread decreased loaf volume by ≥100 mL. The second baking time of par‐baked bread, which was adjusted to have the bread crumb subjected to 97°C for 14 min based on the crumb temperature profile, produced a darker crust of bread compared with the control. The par‐baked bread with 6 min of initial baking at 218°C and frozen at ‐30°C required 12 min of second baking after thawing for 180 min to ≈20°C to produce crust color, crumb moisture, and firmness comparable to that of the control. When thawing time of par‐baked bread was shortened from 180 to 0 min, the second baking time required to yield crust color similar to the control increased from 12 to 16 min. The crumb moisture content was higher in bread baked for 16 min without thawing par‐baked bread than those baked after thawing for 45 or 180 min. Lowering the initial baking temperature of par‐baked bread from 246 to 163°C with the adjustment of baking time from 4 to 12 min decreased crumb firmness of the re‐baked (218°C, 16 min) bread from 2.5 to 1.5 N at 2 hr after baking and from 9.8–10.3 to 6.2–6.3 N at 48 hr. 相似文献
6.
Monoglycerides are widely used in the baking industry because of their antistaling effects, mainly suppressing crumb firming. Commercial monoglycerides are normally prepared from hydrogenated fats, with stearate being the most common fatty acid. In a previous study, monoglycerides such as monopalmitate (C16) and monostearate (C18) had positive effects on Canadian short process bread but no improvements on sponge‐and‐dough process (SDP) bread. The objective of this study was to investigate the effects of saturated monoglycerides of varying fatty acid chain length (C14–C22) on SDP breadmaking quality by using volume judgment, crumb image analysis, and texture measurements. Higher levels (1.00–1.50%) of all monoglycerides (C14, C16, and C18) significantly (P < 0.05) increased loaf volume and cell diameter. The larger cell diameter with increasing levels of these monoglycerides may have resulted from softer, more extensible dough handling properties and greater gas cell stability during baking. Addition of C16 and C18 caused the largest increase in crumb softness with increasing monoglyceride levels but showed relatively low resilience, which might be related to larger loaf volume (i.e., lower density of bread). However, addition of blended monoglycerides C14+C16 increased crumb softness and loaf volume while partially retaining resilience. Each monoglyceride had a different function in breadmaking quality and somewhat positive effects on SDP. 相似文献
7.
Robert A. Graybosch Bradford Seabourn Yuanhong R. Chen Ann E. Blechl 《Cereal Chemistry》2013,90(2):164-168
Dough strength is needed for efficient breadmaking quality. This property is strongly influenced in wheat (Triticum aestivum L.) by gluten seed storage proteins and, in particular, by high‐molecular‐weight (HMW) glutenin subunit composition. Experiments were designed to elevate expression of a key native HMW glutenin subunit (1Dy10) via genetic engineering and to determine whether resultant flours can be used in sponge and dough applications, the most common commercial bread‐baking procedure. Both unblended and blended samples from transgenic and nontransgenic sister lines were tested, with blended samples being formed by addition to a control sample. Dough properties, as determined by farinograph evaluation, were improved by the transgene‐encoded increases in 1Dy10 in both undiluted and blended flours. Mean farinograph stability of transgenic samples was twice that of the control, and blends with transgenic samples demonstrated increases in stabilities proportional to the amount of transgenic flour included. Mean farinograph quality numbers of transgenic samples, and of all blends containing transgenic flour, were significantly higher than both the control and all nontransgenic treatments. In the sponge and dough bake procedure, undiluted transgenic samples induced lower scores, relative to both control and undiluted nontransgenic samples, for water absorption, crumb body firmness, and loaf volume. In blends, however, the transgenic samples resulted in improvements in some sponge and dough loaf attributes, including loaf symmetry and crumb color score, without any concomitant loss of loaf volume in transgenic blends. These improved variables relate to finished product appearance and to consumer selection in markets. The use of transgenic flours with increased 1Dy10 glutenin content in commercial blends could provide advantages in sponge and dough bake applications. 相似文献
8.
Development of a small‐scale method to measure dough extensibility, using a 2‐g mixograph and the TA.XT2 texture analyzer (TA) equipped with Kieffer rig, suitable for early‐generation wheat quality screening is presented. Three hook speeds 3.3, 7.0, and 10.0 mm/sec were tested on the TA. Only at the lower hook speed of 3.3 mm/sec were wheats, varying in quality, clearly differentiated. The ability to differentiate between wheats using the TA was compared with the Brabender Extensigraph. The sample ranking based on the resistance to extension (Rmax) from the TA at a hook speed of 10.0 mm/sec correlated highly (r = 0.99) to the ranking obtained on the extensigraph. Dough extensibility data from the extensigraph and the TA, using hook speed 10.0 mm/sec, was correlated (r = 0.90) to loaf volume. Similarly, dough extensibility on the TA, using hook speed 3.3 mm/sec, was correlated to loaf volume (r = 0.96). The effect of three dough water contents (farinograph absorption, farinograph absorption + 6%, and 2‐g mixograph water absorption) on physical properties of dough were evaluated by mixing the dough in a 2‐g mixograph and testing the extensibility on the TA. Dough prepared at farinograph absorption + 6% and at mixograph absorption allowed differentiation between wheats based on the resistance to extension (Rmax). 相似文献
9.
《Cereal Chemistry》2017,94(5):834-839
The effect of bran prehydration on the composition and bread‐baking quality was determined using bran and flour of two wheat varieties. Bran was hydrated in sodium acetate buffer (50mM, pH 5.3) to 50% moisture at 25 or 55°C for 1.5 or 12 h. The soluble sugar content in bran increased with prehydration. Decreases in phytate and soluble fiber were observed in prehydrated bran, but insoluble fiber was not affected by prehydration. Likewise, free phenolic content decreased, and there was little change in the content of bound phenolics in prehydrated bran. The compositional changes were greater in the bran prehydrated at 55 than at 25°C, and for 12 than for 1.5 h. Addition of prehydrated bran delayed dough development of bran and flour blends and slightly increased water absorption of dough. A higher loaf volume of fresh bread and lower crumb firmness of bread stored for 10 days were observed in bread containing bran prehydrated at 25°C than in bread containing nonhydrated bran or bran prehydrated at 55°C. The prehydration of bran at 25°C before being incorporated into refined flour for dough mixing improved bread quality by altering bran compositional properties, allowing enough water to be absorbed by fibrous materials in the bran and preventing water competition among dough constituents. 相似文献
10.
E. B. Maghirang G. L. Lookhart S. R. Bean R. O. Pierce F. Xie M. S. Caley J. D. Wilson B. W. Seabourn M. S. Ram S. H. Park O. K. Chung F. E. Dowell 《Cereal Chemistry》2006,83(5):520-528
Various whole‐kernel, milling, flour, dough, and breadmaking quality parameters were compared between hard red winter (HRW) and hard red spring (HRS) wheat. From the 50 quality parameters evaluated, values of only nine quality characteristics were found to be similar for both classes. These were test weight, grain moisture content, kernel size, polyphenol oxidase content, average gluten index, insoluble polymeric protein (%), free nonpolar lipids, loaf volume potential, and mixograph tolerance. Some of the quality characteristics that had significantly higher levels in HRS than in HRW wheat samples included grain protein content, grain hardness, most milling and flour quality measurements, most dough physicochemical properties, and most baking characteristics. When HRW and HRS wheat samples were grouped to be within the same wheat protein content range (11.4–15.8%), the average value of many grain and breadmaking quality characteristics were similar for both wheat classes but significant differences still existed. Values that were higher for HRW wheat flour were color b*, free polar lipids content, falling number, and farinograph tolerance. Values that were higher for HRS wheat flour were geometric mean diameter, quantity of insoluble polymeric proteins and gliadins, mixograph mix time, alveograph configuration ratio, dough weight, crumb grain score, and SDS sedimentation volume. This research showed that the grain and flour quality of HRS wheat generally exceeds that of HRW wheat whether or not samples are grouped to include a similar protein content range. 相似文献
11.
Liming Cai Induck Choi Jong‐Nae Hyun Young‐Keun Jeong Byung‐Kee Baik 《Cereal Chemistry》2014,91(1):65-71
The influence of bran particle size on bread‐baking quality of whole grain wheat flour (WWF) and starch retrogradation was studied. Higher water absorption of dough prepared from WWF with added gluten to attain 18% protein was observed for WWFs of fine bran than those of coarse bran, whereas no significant difference in dough mixing time was detected for WWFs of varying bran particle size. The effects of bran particle size on loaf volume of WWF bread and crumb firmness during storage were more evident in hard white wheat than in hard red wheat. A greater degree of starch retrogradation in bread crumb stored for seven days at 4°C was observed in WWFs of fine bran than those of coarse bran. The gels prepared from starch–fine bran blends were harder than those prepared from starch–unground bran blends when stored for one and seven days at 4°C. Furthermore, a greater degree of starch retrogradation was observed in gelatinized starch containing fine bran than that containing unground bran after storage for seven days at 4°C. It is probable that finely ground bran takes away more water from gelatinized starch than coarsely ground bran, increasing the extent of starch retrogradation in bread and gels during storage. 相似文献
12.
R. I. Snchez-Mariez M. O. Cortez-Rocha F. Ortega-Dorame M. Morales-Valdes M. I. Silveira 《Cereal Chemistry》1997,74(4):481-483
The objective of this study was to evaluate how Rhyzopertha dominica infestation of stored wheat grain affects the rheological and baking properties of bread made with the milled flour. Wheat samples were infested with R. dominica and stored for up to 180 days at room temperature. Every 45 days, samples of wheat were collected and evaluated for insect population and flour yield. Flour milled from these wheat samples was evaluated for color reflectance, pH, fat acidity, and rheological properties which were measured by a farinograph. Loaves of bread were baked using a straight-dough procedure. Volume, height, and weight of the loaves were evaluated. None of the analyses performed on the control wheat flours showed any changes during the storage period, and they were similar to the initial wheat. The insect population increased during storage of the wheat up to 90 days, and the flour yield decreased with the storage up to 180 days. Flours from insect-infested wheat absorbed more water than did flours from control wheat. Dough stability and dough development times of infested flours decreased. Bread volume showed a progressive decline throughout the storage experiment. In conclusion, flour from insect-infested wheat exhibited changes in rheological properties such as dough stability, dough development times, water absorption, and mixing stability; bread had an offensive odor; and volume and loaf characteristics were negatively affected. 相似文献
13.
Hydrothermal treatments, which are routine in oat processing, have profound effects on oat flour dough rheological properties. The influence of roasting and steam treatments of oat grain on dough mixing and breadbaking properties was investigated when hydrothermally treated oat flour was blended with wheat flour. Roasting of oat grain (105°C, 2 hr) resulted in oat flours that were highly detrimental to wheat flour dough mixing properties and breadbaking quality. Steaming (105°C, 20 min) or a combination of roasting and steaming of oat grain significantly improved the breadbaking potential of the oat flours. The addition of oat flours increased water absorption and mixing requirements of the wheat flour dough and also decreased bread loaf volume. However, at the 10% substitution level, steamed oat flours exhibited only a gluten dilution effect on bread loaf volume when wheat starch was used as a reference. Oat flour in the breadbaking system decreased the retrogradation rate of bread crumb starch. The results indicate that adequate hydrothermal treatments of oat grain are necessary for oat flour breadbaking applications. Steamed oat flours used at a 10% level retarded bread staling without adversely affecting the loaf volume. 相似文献
14.
Gary A. Hareland 《Cereal Chemistry》2003,80(2):232-237
Preharvest sprouted wheat is often characterized by the falling number (FN) test. FN decreases in preharvest sprouted wheat as enzymatic degradation of the starchy endosperm increases. Wheat with FN values <250–275 is often discounted at the time of sale. The intent of this investigation was to evaluate the effects of debranning or pearling on the flour quality traits of five samples of wheat rated as low, med‐low, medium, med‐high, and sound that exhibited a range in FN values of 62–425 sec. Replicates of each sample were pearled for 30, 60, and 120 sec to remove portions of the outer bran layers before milling. FN was highly correlated with α‐amylase activity (r > ‐0.97) in the med‐low, medium, and med‐high FN sample sets as pearling time increased. FN increased in the medlow, medium, and med‐high FN samples by 128, 123, and 80%, respectively, after 120 sec of pearling. Pearling had no effect on flour FN of the low FN sample but α‐amylase activity was significantly decreased. Pearling had little or no effect on FN and α‐amylase activity of the sound sample. FN was moderately to strongly correlated with Rapid Visco Analyser (RVA), alveograph, and farinograph properties, and poorly correlated with protein content, flour yield, and bread loaf volume. In subsequent breadmaking studies, bread loaf volume, and crumb characteristics of flour from pearled wheat were not significantly different from loaf volume and crumb characteristics of flour from the corresponding nonpearled wheat. 相似文献
15.
Flour mill streams obtained by milling grain of 10 bread wheat cultivars grown in the Skopje region of Macedonia were analyzed for rheological and breadmaking quality characteristics and for composition of gliadins and HMW‐GS. The objective of this study was to examine the relationships between the composition of gluten proteins and breadmaking quality, as well as to determine the importance of gluten proteins for technological quality of flour mill streams. The grain was milled in an experimental mill according to a standardized milling procedure, with three break and three reduction passages. The addition of two vibratory finishers in the milling scheme enabled better separation of bran. A small‐scale baking method for evaluation of the breadmaking properties was developed, and electrophoretic methods including acid‐PAGE and SDS‐PAGE were used to determine the composition of the gluten proteins. There were significant differences in the degree of dough softening of individual and total flour fractions of the flour mill streams for cultivars with different alleles from six loci, for farinograph water absorption from seven loci, and for bread loaf volume and crumb quality score from six loci. The Glu‐1 quality scores for the wheat cultivars investigated were 3–9 and proved to be a useful indicator of breadmaking quality. The novel feature of the investigation related to the breadmaking potential of the flour mill streams compared with straight‐run flours. 相似文献
16.
A 7:3 (w/w) mixture of wheat fiber (WF) and psyllium husk fiber (PHF) was substituted for 10wt% of flour on a 14% mb, and the protein in the blend was restored to 10.3% by incorporating vital wheat gluten. After adding 0.5% sodium stearoyl 2-lactylate, the blend (100 g) was fortified with a combination of fat-coated ascorbic acid (AsA), proteinencased (PE) β-carotene, and cold-water-dispersible (CWD) all-rac-α-tocopheryl acetate (ToAc) at levels of 72, 5.6, and 115 mg, respectively, of active material. Adding the fiber ingredients to the pup loaf formula increased water absorption 25% and mixing time 50% and imparted stickiness to the dough. The fiber and antioxidant bread showed a 10% reduction in loaf volume and a somewhat inferior crumb grain with an off-color caused by small, black specks on a dark gray background. The crumb of the fiber and antioxidant bread remained much softer than control bread during one to seven days of storage at room temperature. Caramel coloring masked the off-color. AsA was lost significantly faster in the fiber and antioxidant bread than in antioxidant bread; the losses of AsA were 97 and 86%, respectively, after three days at 25°C. Approximately 25% of β-carotene was lost from the fiber and antioxidant bread after three days, and 33% after seven days, but the loss of ToAc was <10%. One serving size (one slice, 28 g) of fiber and antioxidant bread was calculated to provide 2.1 g of dietary fiber, or ~8% of daily value, of which ~30% was soluble. The three-day-old slice also contained vitamin E and vitamin A (as β-carotene) at 120–150% and 12–15%, respectively, of the adult recommended daily allowances, but with 16% fewer calories than white pan bread. 相似文献
17.
The cellular structure of bread crumb (crumb grain) is an important factor that contributes to the textural properties of fresh bread. The accuracy of a digital image analysis (DIA) system for crumb grain measurement was evaluated based on its capability to predict bread crumb density from directly computed structural parameters. Bread was prepared from representative flour samples of two different wheat classes, Canada Western Red Spring (CWRS) and Canada Prairie Spring (CPS). Dough mixing and proofing conditions were varied to manipulate loaf volume and crumb density. Sliced bread was subjected to DIA immediately after physical density measurement. Experiments were repeated for the same bread samples after drying to three different moisture contents. Five computed crumb grain parameters were assessed: crumb brightness, cell wall thickness (CWT), void fraction (VF), mean cell area, and crumb fineness (measured as number of cells/cm2). Crumb density ranged from 0.088 to 0.252 g/cm3 depending on proofing and mixing treatments, and was predominantly affected by the former. With increasing crumb density, bread crumb became brighter in appearance, mean cell size and CWT decreased, crumb fineness increased, and the VF decreased. Approximately 80% of the variation in fresh or dried crumb density could be predicted using a linear regression model with two variables, CWT and VF. Results indicated that DIA of directly computed crumb grain could accurately predict bread crumb density after images had been correctly classified into cells and background. 相似文献
18.
The effect on physical dough properties of nitrogen and sulfur fertilizer applied during cultivation was observed in two trials using the bread wheat (Triticum aestivum) cultivar Otane. Wheat flours from both trials were evaluated for physical dough properties under laboratory conditions and also under industrial conditions in the second trial. The laboratory and industrial optimum mechanical dough development (MDD) work input (WI) significantly increased when nitrogen (N) fertilizer was applied without sulfur fertilizer (S) during crop cultivation. With combined N and S fertilization, laboratory and industrial WI remained close to levels for grain grown without fertilizer. Reductions in extensigraph resistance to extension (Rmax) and increases in extensigraph extensibility (Ext) due to S fertilization also were observed. None of the observed changes in WI, Rmax, or Ext due to S fertilization significantly affected end‐product quality as measured by loaf volume, crumb grain, and bake score. The nexus between WI and Rmax was weakened by combined N and S fertilization in the first trial, but remained strong in the second trial. Both WI and Rmax increased as N fertilizer and flour nitrogen increased, but at different rates. This observation indicated that by applying N fertilizer to improve dough strength, a disproportionate and disadvantageous increase in WI also resulted, which could be tempered by S fertilization. In this regard, an optimum N:S fertilizer ratio of 3:1 was indicated, although this ratio would be dependent on the balance of available N and S in the soil. Flour N:S ratios <12.5 kept WI to levels desirable in an industrial MDD bakery. Correlations between laboratory WI, mixograph development time (except in the SN1 trial), and farinograph development time were significant. The 125‐g MDD mixers appeared to be more responsive when measuring mixing requirements than the mixograph and farinograph to variations in quality due to environmental and agronomic influences and correlated better with industrial performance. 相似文献
19.
Liming Cai Induck Choi Choon‐Ki Lee Kwang‐Keun Park Byung‐Kee Baik 《Cereal Chemistry》2014,91(4):398-405
Variations in physical and compositional bran characteristics among different sources and classes of wheat and their association with bread‐baking quality of whole grain wheat flour (WWF) were investigated with bran obtained from Quadrumat milling of 12 U.S. wheat varieties and Bühler milling of six Korean wheat varieties. Bran was characterized for composition including protein, fat, ash, dietary fiber, phenolics, and phytate. U.S. soft and club wheat brans were lower in insoluble dietary fiber (IDF) and phytate content (40.7–44.7% and 10.3–17.1 mg of phytate/g of bran, respectively) compared with U.S. hard wheat bran (46.0–51.3% and 16.5–22.2 mg of phytate/g of bran, respectively). Bran of various wheat varieties was blended with a hard red spring wheat flour at a ratio of 1:4 to prepare WWFs for determination of dough properties and bread‐baking quality. WWFs with U.S. hard wheat bran generally exhibited higher dough water absorption and longer dough mixing time, and they produced smaller loaf volume of bread than WWFs of U.S. soft and club wheat bran. WWFs of two U.S. hard wheat varieties (ID3735 and Scarlet) produced much smaller loaves of bread (<573 mL) than those of other U.S. hard wheat varieties (>625 mL). IDF content, phytate content, and water retention capacity of bran exhibited significant relationships with loaf volume of WWF bread, whereas no relationship was observed between protein content of bran and loaf volume of bread. It appears that U.S. soft and club wheat bran, probably owing to relatively low IDF and phytate contents, has smaller negative effects on mixing properties of WWF dough and loaf volume of bread than U.S. hard wheat bran. 相似文献
20.
The effects of increasing levels of eight commercial fungal enzymes enriched in four types of activity (α‐amylase, protease, xylanase, or cellulase) on Japanese‐style sponge and dough bread quality and processing characteristics have been studied using a Canadian red spring wheat straight‐grade flour. At optimum levels, the enriched α‐amylases, xylanases, and cellulases increased loaf volume and bread score and reduced crumb firmness, while the proteases only reduced crumb firmness. For α‐amylases, xylanases, and cellulases, optimum levels for crumb firmness were obtained at higher levels of addition than for loaf volume and bread score. At high levels of addition, all four enriched enzyme types reduced loaf volume and bread score and increased crumb firmness relative to optimum levels, with the proteases showing the most dramatic effects. α‐Amylases and cellulases had little impact on dough mixing requirements, while xylanases increased and proteases greatly reduced mixing requirements. All enzymes at optimum levels reduced sheeting work requirements, resulting in softer more pliable dough. Optimum bread properties for α‐amylases, xylanases, and cellulases were attained within a relatively narrow range of dough sheeting work values. This similarity in response suggests a dominant common nonspecific mechanism for their improver action, which is most likely related to water release and the resulting impact on physical dough properties. 相似文献