首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 375 毫秒
1.
Bio-materials have ignited a quest among research fraternity to be used in every possible field of applications like automobile, sports, medical, civil and textile industry. Application spectrum of natural fiber reinforced polymer composites is spreading globally in every field of engineering having structural and tribological applications. The present work investigates the tribological performance of regionally available inexpensive plant based natural fiber reinforced polymer composites. In this work, three different types of natural fibers (jute, hemp, and flax) were reinforced with epoxy matrix to fabricate natural fiber reinforced polymer composites (NFRP) and their hybrid composites (jute/hemp/Epoxy, hemp/flax/epoxy and jute/ hemp/flax/epoxy) using hand-layup technique. Tribological performance of the developed bio-composites were evaluated in terms of frictional characteristics and sliding wear under dry contact condition at different process parameters, such as applied load (10-50 N), sliding speed (1-5 m/s) and sliding distance (1000-2000 m). Experimental results of wear analysis confirmed that incorporation of natural fibers into epoxy polymer matrix significantly improved the wear behavior of the developed NFRP composites in comparison to neat epoxy polymer. Among all the developed composites, jute/epoxy composite achieved the highest coefficient of friction, frictional force and specific wear rate. Dynamic mechanical analysis (DMA) was also analyzed to evaluate the viscoelastic behavior of the developed composites. The surface morphology of samples after wear test was examined by scanning electron microscopy to investigate and propose the possible wear mechanism of the developed composites.  相似文献   

2.
This research is intended to improve the interface between the fibers and the matrix and limit water absorption of bio-based material thereby decreasing degradation of the composites when they are exposed to external environment such as high temperature and humidity. In this study, flax fibers were treated with an organic surface coating containing SiO2 nanoparticles. This coating was a dispersion of silica fume in epoxy. One composite was also made with raw fibers as reference as well as one sample of pure PLA. Flax fibers/PLA composites were manufactured by hot pressing by stacking 4 PLA films and 3 pieces of flax fabric. Morphology and dispersion of the coating on the fibers was observed by scanning electron microscopy (SEM), small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM). Accelerated ageing was carried out on the 3 materials by placing them in a 50 °C water bath until saturation to investigate the influence of the coating on water diffusion. Mechanical properties of the different composites were investigated by tensile (before and after conditioning) and short beam shear (SBS) testing in order to evaluate the impact of the coating on the interfacial properties of the materials. The results show that the fibers surface was homogenized and that a better adhesion was reached because of the coating. Coating the fibers also allowed the decrease in water uptake by more than 10 % and their protection during conditioning, preserving their mechanical properties.  相似文献   

3.
Spectrophotometric, morphologic and dielectric properties of polyacrylonitrile (PAN) composite films in the presence of pyrrole derivatives were reported in this paper. The composite films were fabricated by oxidative polymerization of pyrrole (Py), N-methyl pyrrole (NMPy) and N-phenyl pyrrole (NPhPy) by cerium(IV) on polyacrylonitrile matrix. The effect of temperature on the dielectric properties was studied in the frequency range from 0.05 Hz up to 10 MHz and in the temperature range from 0 °C up to 250 °C. Conductivity was increased with temperature due to increase of the mobility of charge carriers in the composite films. By increasing the temperature, the dipoles become free and respond to the applied electric field in composite structure; thus, the polarization and dielectric constant increases. PNPhPy-PAN composite films exhibited the highest dielectric constant, AC conductivity and tan delta.  相似文献   

4.
The effects of adding surface modified graphene nanoplatelets (GNPs) in various weight percentages (0, 0.1, 0.2, 0.3, 0.4, 0.5 with respect to matrix) on the high velocity impact response of basalt fibers/epoxy composites were evaluated. High speed mechanical stirrer and ultrasonic waves were used for the dispersion of GNPs in the epoxy matrix, and hand layup method was utilized for the fabrication of the composite samples. High velocity impact testing was performed using a conical projectile. The results demonstrated that the maximum improvement in the impact limit velocity and energy absorption occurred in the 0.3 wt.% GNPs nanocomposite, i.e., 11 and 23 %, respectively. Also, the electron microscopy studies revealed that the addition of GNPs contributed in improving the impact properties by influencing the matrix and thus enhancing the interfacial characteristics between the basalt fibers and the matrix.  相似文献   

5.
Recently, carbon fiber composites have been widely used as structural reinforcement materials of buildings, replacing reinforcing bars or concrete. And the increase in use of super fibers such as aramid and high strength PE, which is aimed at improving the reinforcement properties, has resulted in a demand for a resin system with excellent mechanical and thermal properties. In this research, a fiber-reinforced composite has been produced by using the super fibers such as carbon fiber or aramid fiber, reinforcement resin and the silica hybrid compound containing epoxy group. This study was carried out to confirm the effect of the silica hybrid on mechanical properties, heat resistance and adhesion strength of a fiber-reinforced epoxy composite, which was produced by blending silica or introducing silica hybrid through covalent bonds. And the silica hybrid containing epoxy group, which may be introduced to the structure of fiber-reinforced epoxy composite through covalent bonds caused by reaction with a hardener, has been used, so that the heat resistance and adhesion strength could be improved.  相似文献   

6.
Single walled carbon nanotubes (SWNTs) are considered as a highly potential reinforcement material for the epoxy composites. Dispersion of SWNTs in epoxy and poor interfacial strain transfer are two major challenges. Surface functionalization is one efficient way to change the dispersion and interfacial properties of SWNTs. In this study, five different modification methods of SWNTs were used, and the functional groups on the SWNTs were tested by X-ray photoelectron spectroscopy and Raman spectroscopy. The SWNTs/epoxy composite were prepared using dimethylformamide (DMF) as the solvent. SWNTs at two concentration levels of 0.05 wt% and 0.5 wt% and with five different surface modifications were filled in to epoxy resins. The dispersion of the nanotubes in epoxy resin was evaluated by light optical microscope (LOM), with high content of SWNTs more aggregates appear. The interfacial strain transfer was tested by Raman shift of the 2D band when applying a strain on the epoxy composite sample. With equal strain levels in the composite more strain was transferred from epoxy matrix to SWNTs with 0.05 wt% of SWNTs than the 0.5 wt% of SWNTs filled epoxy resin. Mechanical properties were influenced by the strain transfer efficiency and the curing degree of the samples.  相似文献   

7.
Many works deal with the mechanical properties of flax fibers cultivated for textile applications and today used for the reinforcement of polymers. Nevertheless, quantities of oleaginous flax fiber are obtained each year and not promoted. The aim of this work is to study the mechanical properties of single linseed flax fiber as a function of variety, culture year, dew-retting degree and agronomic factors. Five varieties of oleaginous flax have been characterized by tensile tests on elementary fibers and compared to four varieties of textile flax. These tensile experiments have been carried out on with the same equipment, experimental protocol and environmental conditions.The results show that interesting mechanical properties were obtained with the oleaginous variety and are close of those of textile varieties, such as Agatha or Electra. Considering the diameters and specific properties of these oleaginous fibers, we evidenced that they are good candidates for the substitution of glass fibers in composite materials. To increase the development of flax fibers, it is important to have a better control of the spread of their mechanical properties. This point could be observed with the Everest variety cultivated for 4 years and no conclusion could be made.We have evidenced that the retting degree has no influence on the diameters and mechanical properties of the fibers; the same conclusion is obtained with agronomic factors such as seeding rate and plant height.  相似文献   

8.
In order to improve the interfacial adhesion property between Poly(p-phenylene benzobisoxazole) (PBO) fiber and epoxy, the surface modification effects of PBO fiber under dielectric barrier discharge treatments in different time were investigated. The samples were tested for surface morphology, functional groups, surface wettability and interfacial shear strengths (IFSS) in epoxy using scanning electron microscope, Fourier transform infrared spectroscopy, water contact angle measurements and Micro-bond pull out tests, respectively. The results indicated that fiber surface morphology after plasma treatment was rougher than untreated one. Some polar groups were introduced on fiber surface in plasma treatment. Moreover, surface wettability and the IFSS between fiber and epoxy had much improvement after plasma treatment, the contact angle decreased with the treatment time increasing and reached the lowest value when the treated time was 60 s, and the IFSS was improved by 117.3 %. On the other hand, no significant difference in single fiber tensile test was observed between treated and untreated fibers when the processing time was shorter than 75 s, but the tensile strength declined by more than 10 % after 75 s treatment as a result of the excessive plasma etching.  相似文献   

9.
In order to develop composites with better mechanical properties and environmental performance, it becomes necessary to increase the hydrophobicity of the natural fibers and to improve the interface between matrix and natural fibers. Graft copolymerization of natural fibers is one of the best methods to attain these improvements. Only few workers have reported the use of graft copolymers as reinforcing material in the preparation of composites. So in the present paper, we report the preparation of graft copolymers of flax fibers with methyl acrylate (MA) using Fenton’s reagent (FAS-H2O2) as redox system. Synthesized flax-g-poly(MA) was characterized with FTIR, TGA/DTA, scanning electron microscopy (SEM), and X-ray diffraction (XRD) techniques. Composites were prepared using flax-g-poly(MA) as a reinforcement and phenolformaldehyde (PF) as the binding material. Mechanical properties of phenol-formaldehyde composites were compared and it has been found that composites reinforced with flax-g-poly(MA) showed improvement in mechanical properties. Composites reinforced with flax-g-poly(MA) showed better tensile strength (235 N) and compressive strength (814 N) in comparison to composites reinforced with original flax fiber which showed lesser tensile strength (162 N) and compressive strength (372 N). Composites reinforced with flax-g-poly(MA) shows the improved MOR, MOE, and SP.  相似文献   

10.
The aim of the presented research was to study the influence of surface layer material on improvement of impact, dielectric, EMI shielding and sound absorption properties of sandwich composites. The sandwich composite structure consisted of Kevlar or Carbon woven fabric at the surface layer, recycled high loft nonwoven in the center and a mixture of carbon particles/epoxy matrix as a binder to hold the surface layer and core together. The carbon particles were incorporated in epoxy in order to improve failure mechanism and enhance dielectric properties or electromagnetic shielding of sandwich composites. The biggest improvements on impact properties of sandwich composites were obtained when Kevlar fabric was used as surface layer. However, surface layer of carbon fabric was found to provide better dielectric properties and improve EMI shielding of sandwich composites against Kevlar fabric surface layer.  相似文献   

11.
The aim of this paper is to develop a green composite using only flax fiber material for thermal insulations and sound absorbing using flax-tows and thus enhance the less noble part of the flax plant. The Lin-K process is a simple patented manufacturing process used to develop these self-linked materials. Thermal conductivity, absorbing acoustic coefficient, hydric properties and the effect of several parameters on these performances are reviewed. The use of fine flax-tows leads to extract more organic substances of the inner fibers during the microwave treatment which improves the mechanical performances and reduces the thermal conductivities of these materials. The environment has very significant effects on thermal stability and durability of these materials.  相似文献   

12.
In this research work, aramid and semi-carbon fibers (SCFs) were hybridized in the form of interlayer or layer by layer into epoxy matrix by hand lay-up method. Afterward, the effect of hybridization on the thermal and mechanical properties of epoxy composites was characterized by thermal analysis; horizontal burning; tensile and bending tests. Based on the results of the mechanical tests, increasing SCFs to aramid fibers ratio decreased tensile strength, elastic and flexural modulus. But with increasing this ratio to 53 % failure strain reduced, whereas in the ratios of more than 53 %, the failure strain enhanced. The results of thermal analysis curves indicated that there are three stage mass loss at the temperature ranges of 100-220, 270-470 and 500-620 °C. It was also found that with increasing the SCFs to aramid fibers ratio decreased the third-stage of the mass loss. The results of horizontal burning showed that increasing the SCFs to aramid fibers ratio decreased the rate of burning.  相似文献   

13.
Present technological development and innovation needs a better class of material that meets all the practical applications along with its environmental friendly nature and economical value. Hybrid natural fiber composites, a sector of natural composites meets these requirements. This paper deals with fabrication, mechanical characterization of a hybrid (Jute+Flax+GFRP) composite and also the comparison of it with the (Jute+GFRP) based composite. These composites are fabricated using hand lay-up technique. The arrangement of hybrid composite is such that a layer of vertically laid flax fiber is flanked between layers of horizontally laid jute fiber. Epoxy resin alongside with HY951 hardener is used as the binding agent throughout the layer. Glass fiber laminates are used on both sides for improving the surface finish and surface hardness. The volumetric fraction is such that one third of total volume is occupied by Jute and Flax fibers. Test results shows that the hybrid natural composite has excellent properties under tensile, flexural loading. At last failure morphology analysis is done using Scanning Electron Microscope (SEM) and the internal structure of the broken specimen is discussed.  相似文献   

14.
Ni-coated short carbon fibers (Ni-SCFs) were prepared using an electrodeposition method. Short carbon fiber (SCF) reinforced epoxy composites were prepared by changing the fiber content (0.1–0.7 wt%). To investigate the effect of Ni-coated short carbon fibers on the mechanical and electrical properties of the composites, we prepared two kinds of reinforcements: the short carbon fibers treated by 400 °C (400 °C treated SCFs) and Ni-SCFs. Fracture characteristics of the composites revealed the Ni coatings and the epoxy matrix had a better interface, so that the results of tensile and bending strength were better in epoxy/Ni-SCFs composites than those in epoxy/400 °C treated SCFs composites. The 400 °C treated SCFs decreased the electrical resistivity of the epoxy composites, compared to the pure epoxy. However the epoxy/Ni-SCFs composites had lower electrical resistivity than epoxy/400 °C treated SCFs with the same fiber content.  相似文献   

15.
This paper presents an investigation of the influences causing failure in the materials comprising polymer matrix composites. Structures with differences in stacking sequences and design configuration are analysed. The objective of this study is to investigate and evaluate the reasons for the failure of composite lamination structures in terms of stress, strength, strain, and Young modulus within a morphology observation of composite materials. The materials selected for the study were a chopped strand mat (CSM) and a woven roving (WR) fabric. These materials are used as reinforcement and are produced by the hand lay-up technique using epoxy and polyester matrix resin. The experiment was performed using specimens made of notched (open-hole; OH) tension and un-notched (UN) shapes. The characteristics of different shapes, materials, and lamination structures are studied in this research. The results showed the failure phenomenon in the structure of the polymer matrix composite is dependent on the characteristics of the material used and the design configuration of both structures.  相似文献   

16.
Intra-layer and inter-layer hybrid composite laminates were made with epoxy resin and compositions were varied in six different proportions. In-plane compressive mechanical properties were studied using finite element analysis and experiments, and the results found were in good agreement. Properties of intra-layer and inter-layer hybrids were compared with plain carbon/epoxy and plain glass/epoxy composites, and a comparison among themselves was also made. It was found that intra-layer hybrids to some extent exhibit better compressive properties compared to inter-layer hybrids. Percentage enhancement in compressive failure strain was noticed. Negative hybrid effects on compressive strength was noticed for both intra-layer and inter-layer hybrid configurations. It was found that proportion of carbon fiber content plays a key role in determining the compressive properties. According to macro-scale observation all composite laminates failed catastrophically under compressive loading. SEM observation depicted that under compressive loading carbon fibers break first followed by glass fiber.  相似文献   

17.
Lightweight concrete becomes an important subject of research because of its insulating properties. The main objective of this research is to present a process improving the flax shive behaviour in a cement matrix. Flax shives stem from flax culture. It is the major product (50% of biomass weight). To be used as aggregates, shives should have a hydrophobization treatment. The aim of this work is the treatment of shives with a biodegradable elastomer: poly(PEG-co-CA). This elastomer is synthesized by the polycondensation of polyethylenglycol (PEG) and citric acid (CA). After their treatment with PEC elastomer, flax shives show a decrease in water absorption. Then, they are incorporated in a cement matrix. Mechanical properties, thermal properties and behaviour towards water (dimensional variations) of concrete are determined. The shive treatment shows an improvement in compressive and flexural strengths but an increase in thermal conductivity. The extreme dimensional variations (EDVs) and drying shrinkage (DS) decrease also with concrete prepared with treated shives compared to the standard. Overall the lightweight concrete obtained exhibits performances close to those of wood concrete.  相似文献   

18.
The objective of this study is to characterize the fatigue strength of a Kevlar/epoxy laminate composite as well as the benefits obtained by using an epoxy matrix filled by cork powder. Twelve ply laminates, all in the same direction, of woven bi-directional Kevlar 292, were prepared by hand lay-up, using an SR 1500 epoxy resin. The composite sheets were produced by a vacuum moulding process. The addition of cork powder reduces the static strength, however, in terms of fatigue strength a similar behavior was found for both laminates.  相似文献   

19.
To improve interfacial adhesion between carbon fiber and epoxy resin, the epoxy matrix is modified with N-(2-aminoethyl)-3-aminopropylmethyldimethoxysilane (YDH602) and N-(2-aminoethyl)-3-aminopropyltrimethoxysilane (YDH792), respectively. And the effect of matrix modification on the mechanical performance of carbon/epoxy composites is investigated in terms of tensile, flexural and interlaminar properties. The flexural properties indicate that the optimum concentration of silane coupling agents YDH602 and YDH792 for the matrix modification is approximately 0.5 wt% of the epoxy resin system, and the mechanical properties of the YDH792-modified epoxy composites is better than that of the YDH602-modified epoxy composites at the same concentration. Compared to unmodified epoxy composite, the incorporation of 0.5 wt% YDH792 results in an increase of 4, 44 and 42 % in tensile, flexural and interlaminar shear strength (ILSS) values of the carbon/epoxy composite, respectively, while the corresponding enhancement of tensile and flexural modulus is 3 and 15 %. These improvements in mechanical properties can be considered to be an indication of better fiber/matrix interfacial adhesion as confirmed by SEM micrographs of the fracture surface after interlaminar shear testing. The viscosity of the modified epoxy resin system can be reduced by incorporation of silane coupling agent YDH792, which is beneficial for fiber impregnation or wetting during liquid composite molding process.  相似文献   

20.
A study on the tensile and flexural properties of jute-glass-carbon fibers reinforced epoxy hybrid composites in inter-ply configuration is presented in this paper. Test specimens were manufactured by hand lay-up process and their tensile and flexural properties were obtained. The effects of the hybridization, different fibers content and plies stacking sequence on the mechanical properties of the tested hybrid composites were investigated. Two-parameter Weibull distribution function was used to statistically analyze the experimental results. The failure probability graphs for the tested composites were drawn. These graphs are important tools for helping the designers to understand and choose the suitable material for the required design and development. Results showed that the hybridization process can potentially improve the tensile and flexural properties of jute reinforced composite. The flexural strength decreases when partial laminas from a carbon/epoxy laminate are replaced by glass/epoxy or jute/epoxy laminas. Also, it is realized that incorporating high strength fibers to the outer layers of the composite leads to higher flexural resistance, whilst the order of the layers doesn’t affect the tensile properties.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号