首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 34 毫秒
1.
Polyglycolic acid-poly lactic glycolic acid (PGA-PLGA) electrospun nanofibers containing silver nanoparticles have been produced and twisted into the nanofibrous yarn. The morphology of nanofibers and produced yarns, as well as the mechanical properties of the yarns, were investigated. Furthermore, in vitro antibacterial properties and in vitro degradation behavior of yarns containing various silver nanoparticles were studied. SEM images confirmed that the addition of the silver nanoparticles into the polymer solution increases the fiber diameters. The result of the mechanical test of the yarns alone and used in two different forms of the knots was measured and results showed that the strength of the yarns without the knot was significantly more than that of others. The biodegradability test showed that the mechanical properties and the weight of the yarns were quickly reduced after subjecting to in vitro condition. The result of the antibacterial test indicated that the nanofiber yarns containing %3 silver nanoparticles were the most appropriate sample with a considerably antibacterial activity against both gram-positive bacterium Staphylococcus aureus and gram-negative bacterium Escherichia Coli with inhibition zones of 8.1 and 9.5 mm, respectively; which demonstrated that silver nanoparticles retained their effectiveness after the electrospinning process. Therefore the nanofibrous yarns containing silver nanoparticles could be successfully produced by the electrospinning process with the proper antibacterial property as a candidate for the surgical sutures.  相似文献   

2.
Biocompatible polyvinyl alcohol (PVA)-styrylpyridinium (SbQ)/β-cyclodextrin (β-CD) composite nanofibers were obtained by electrospinning in this study. PVA-SbQ was used as the foundation polymer as well as crosslinking agent, β-CD was incorporated to achieve expected properties such as improved mechanical properties and thermal stability. The Fourier transform infrared spectroscopy (FTIR) spectra confirmed the existence of β-CD, and the morphologies and average fiber diameters of the electrospun composite nanofibers were also analyzed by SEM. X-ray diffraction patterns (XRD) of PVA-SbQ/β-CD composite nanofibers revealed that the inclusion of β-CD in the nanofibers affected the ordered phase of PVA. Besides, the thermal analyses revealed the improvement in the thermal properties for PVA-SbQ/β-CD composite nanofibers. It was found that the crosslinked composite nanofibers showed a clear higher tensile strength (TS) as well as a greater elongation at break (EB). Eventually, antifungal drug griseofulvin (GSV) has been loaded into the composite nanofibers by formation of its inclusion complex with β-CD in aqueous solution, ultraviolet light (UV-Vis) spectral analysis showed that the drug-loading nanofibers had certain sustained release effect.  相似文献   

3.
PLA/PLA-g-ABS blends were prepared and evaluated for mechanical properties performance. Firstly, carboxylic acid functionalized ABS particles were synthesized by grafting polymethacrylic acid (PMAA) onto ABS particle surface using potassium persulfate as an initiator. The reaction was followed by FTIR analysis. The resultant carboxylated ABS was melt mixed with virgin PLA in an internal mixer to obtain PLA/PLA-g-ABS blends. The obtained PLA/PLA-g-ABS blends were subject to injection molding to obtain specimens for testing evaluation. It was found that impact resistance values significantly outperformed neat PLA by 60 %, 87 %, and 150 % for PLA/PLA-g-ABS 10 wt%, PLA/PLA-g-ABS 20 wt%, and PLA/PLA-g-ABS 30 wt%, respectively. A significant increase in impact strength was contributable to ABS rubber which exhibited even dispersion and good interfacial adhesion. The impact strength was dependent on the percent loading of PLAg-ABS; the more the PLA/PLA-g-ABS the higher the impact strength value. In a similar manner, tensile strength increases when loaded with PLA/PLA-g-ABS albeit at lesser effect. Considering the percent elongation, a massive increase in percent elongation was recorded in case of PLA/PLA-g-ABS 20 wt% and PLA/PLA-g-ABS 30 wt%, implying that these blends were extremely flexible and tough when compared to neat PLA, control, and PLA/PLA-g-ABS 10 wt%.  相似文献   

4.
In this study, two biodegradable polymers, polycaprolactone (PCL) and polyvinyl alcohol (PVA) were used to fabricate nanofiber nonwovens (NFNs). Also, the silver nanoparticles (AgNPs) successfully reduced by using tea polyphenols (TP) and incorporated in the NFNs via electrospinning. The morphologies of the NFNs and AgNPs were analyzed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), respectively. The PCL nanofibers and PVA nanofibers interweaved each other, and AgNPs with average diameter 1.53±0.15 nm were embedded in the PVA nanofibers. The properties of electrospun NFNs were characterized by pore property, swelling/weight loss, water contact angle, mechanical property, and antibacterial activity. The nanofibers cross-linked to each other forming the 3Dnetwork porous structure with diameter about 1-1.5 μm. Although the hydrophobic PCL was added in the hybrid NFNs, the NFNs still showed hydrophilic propriety, high swelling degree (i.e. swelling degree is 330 % for 48 h), and low weight loss (i.e. weight loss is 22.4 % for 48 h). Also, the hybrid PCL/PVA/AgNPs NFNs exhibited a suitable mechanical property for wound dressings (i.e. tensile strength is 4.27 MPa, and breaking elongation is 88 %). Moreover, the hybrid NFNs effectively inhibited growth of Escherichia coli and Staphylococcus aureus. In summary, this PCL/PVA/AgNPs NFNs may provide a promising candidate for accelerating wound healing.  相似文献   

5.
Phytoncides are volatile organic compounds released from trees and plants and are well known for their natural antibacterial activity. In this study, emulsion electrospinning was used to encapsulate phytoncide in the core of nanofibers, with the aim of developing environmentally friendly, functional nanofibers with a sustained release of the encapsulated component. Core/sheath structured phytoncide/poly(vinyl alcohol) nanofibers were successfully prepared by emulsion electrospinning using an ordinary single-nozzle electrospinning setup. An oil-in-water emulsion of an aqueous solution of poly(vinyl alcohol) (as the aqueous phase) and phytoncide (as the oil phase) was used to prepare the core/sheath structured nanofibers. Nanocomposite fibers were electrospun under various spinning conditions and emulsion formulations to find the suitable processing conditions for fabricating nanofibers with core/sheath structures. The resulting nanofibers exhibited a well-aligned core/sheath structure with fiber diameters of 250-350 nm. The release profile of phytoncide from the core of nanofibers over a 21 day period showed that phytoncide was released in a sustained manner over 14 days. The core/sheath structured phytoncide/poly(vinyl alcohol) nanofibers exhibited 99.9 % bacterial reduction against both Staphylococcus aureus and Escherichia coli, indicating that the encapsulated phytoncide in the fiber provided strong antimicrobial effects.  相似文献   

6.
GSP/gelatin composite nanofiber membranes containing silver nanoparticles were successfully fabricated as a novel biomaterial by electrospinning. The silver nanoparticles (AgNPs) were synthesized with the grape seed polyphenols (GSP) as reducing agent in aqueous solution of gelatin, and then the GSP/gelatin/AgNPs mixed solution was electrospun into nanofibers at 55 °C. The scanning electron microscopy (SEM) confirmed that the composite fibers were uniform and the average fiber diameter ranged between 150 nm and 230 nm with an increase in applied potentials from 14 kV to 22 kV. And the transmission electron microscopy (TEM) showed that silver nanoparticles distributed individually in the fibers with the average particle size of about 11 nm. Furthermore, the ultraviolet visible spectrophotometer (UV-vis spectroscopy) test demonstrated that all of Ag+ converted to Ag0 when the concentration of gelatin was 24 wt% and the mass ratio of GSP to AgNO3 was about 5:2. The antibacterial activities of the fiber membranes against E.coli and S.aureus were measured via a shake flank test and demonstrated good performance after the importation of silver nanopaticles. Cytotoxicity testing also revealed that fiber membranes contained silver nanoparticles had no cyto-toxic. All the results indicated that the GSP was effective for the formation and stabilization of silver nanoparticles in composite nanofibers mats which had the potential for applications in antimicrobial tissue engineering and wound dressing.  相似文献   

7.
Dry bacterial cellulose nanofiber (BC) sheet coated with poly(lactic acid) (PLA) was developed and characterized towards acute wound healing applications. This new approach of PLA coating on BC revealed enhanced physical and antibacterial properties. Commercial BC sheets originated from the manufacturing of nata de coco jelly were dried and coated with the PLA at various concentrations of 2, 4, 6, 8, 10 and 12 % w/v for the purpose of improving the mechanical properties and followed by loading of antiseptic such as benzalkonium chloride (BAC). PLA has been proposed for the use of coating materials at a concentration of 8 %, the biocomposite sheet started exhibiting a low moisture uptake, prolonged swelling in simulated wound fluid solution and high tear (9.17 Nm2/kg) and burst indices (32.5 kPa·m2/g). The 8 % PLA coating revealed porous fiber-like morphology as observed under scanning electron microscope. Therapeutic loading capacity of the BC/8 PLA was substantially higher than the pristine BC. Furthermore strong antimicrobial activities against Staphylococcus aureaus and Escherichia coli were observed for the BC/8PLA biocomposite film. These reports were clearly suggestive of the fact that synthetic biodegradable polymers, such as PLA, may be exploited for the synergistic combination with BC for antimicrobial and acute wound management. This new and modified fiber source material could reduce the dependency on plant based cellulose for more demanding biomedical applications such as wound healing materials, vascular graft, cartilage replacement, drug delivery and tissue engineering.  相似文献   

8.
Fruits obtained from shrubs of the Crataegus elbursensis (C. elbursensis) plant demonstrate significant antioxidant and antibacterial properties. In this study, natural dye was sono-extracted from fresh and dried fruits and applied in dyeing and antibacterial finishing of wool. The maximum sono-extraction yield was obtained when optimal conditions of ethanol/ water (4/1 v/v) as extracting solvent, time 30 min, pH 4, temperature 50 oC, and C. elbursensis concentration 10 g/l were used. When wool yarns were dyed with the extracted natural dye, the maximum dye uptake was achieved using dye concentration 75 % owf, and dyeing condition of 100 oC, 60 min, pH 4, and LR 100:1. Different metal salts like aluminum sulfate, copper sulfate, and tin chloride were applied on wool by pre-mordanting method and their effects on dye uptake, color variation, and color fastness were examined. Results showed that the natural dye itself had relatively high uptake and good color fastness on un-mordanted wool. Further, each mordant had different effect on dye uptake, color variation, and color fastness properties depending on its coordination ability with dye molecules and wool chains. Moreover, dyed yarns showed good antibacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) bacteria.  相似文献   

9.
A water soluble quaternary ammonium chitosan derivative, N-benzyl-N,N-diethyl chitosan quaternary ammonium salt (BDCQA), was prepared for antibacterial finish of cotton textiles. The effects of concentrations of finish agents and treatment time on the add-on ratio of cotton treated BDCQA (BDCQA-cotton) were studied in details. The morphology and thermal property of BDCQA-cotton were characterized by scanning electron microscopy (SEM) and thermagravimetric (TG) analysis. Gram-positive bacterium Staphylococcus aureus (S. aureus) and Bacillus cereus (B. cereus), Gram-negative bacterium Escherichia coli (E. coli) and drug-resistant bacterium Methicillin-resistant Staphylococcus aureus (MRSA), were used to evaluate the antibacterial activity and durability of BDCQA-cotton. The results showed that BDCQA-cotton possessed good antibacterial activity and high durability against broad spectrum bacterium. The preliminary investigation on the antibacterial mechanism was discussed in this work.  相似文献   

10.
This study aimed to produce poly(4-vinyl pyridine) and hydroxypropyl methacrylamide (HPMA)-based bilayer wound dressings materials enhancing healing mechanism for the wounds which have self-healing problem and high infection risk. These materials were designed to protect wound from secondary traumas caused microorganism invasion and do not have toxic substance release problem. Synthesis of quaternary poly(4-vinyl pyridine) (poly(Q4-VP)) which is the antibacterial layer of wound dressing material was carried out in two stages. At first stage, poly(4-vinyl pyridine) polymer was synthesized from 4-vinyl pyridine monomer by free radical polymerization. Then, poly(Q4-VP) was synthesized from poly(4-VP) by alkylation reaction with 6-bromocaproic acid. Resulted polymer was structurally characterized by FT-IR. The macroporous spongy structure, as the lower layer of wound dressing material, was prepared by cryogelation of HPMA. Then, the antibacterial polymer was electrospun onto the cryogel structure and bilayered material was obtained. Cryogel structure, fiber morphology and layer integration was examined by SEM. In order to enhance wound healing process, ascorbic acid (vitamin C) was loaded to cryogel layer and release was followed by spectrophotometrically. The antimicrobial properties of the materials were examined against Escherichia coli, Staphylococcus aureus and Candida albicans, respectively. According to the results, bilayered, antibacterial and antifungal against Staphylococcus aureus and Candida albicans, temporary wound dressings which can stimulate wound healing and have high swelling capacity were obtained successfully.  相似文献   

11.
One step thermochromic pigment printing and antibacterial functionality of cotton (100 %) and cotton/polyester blend (50/50 %) were demonstrated in this study. The improvement in antimicrobial activity against G+ve (Bacillus cereus) and G-ve (E. coli), and pigment printability were achieved by inclusion of Ag-NPs (30 g/kg) into pigment printing paste followed by printing and microwave curing at 700 W for 5 min. Modes of interactions were proposed, and surface modification was also confirmed by SEM and EDX analysis that proved the presence of Ag-NPs in cotton and cotton/ polyester blended samples. The results indicated that the colour fastness to wash and rubbing was excellent, the surface roughness reduced, and exhibited good antibacterial activity against Bacillus cereus and E. coli bacteria.  相似文献   

12.
Silver nanoparticles (AgNPs) were attached to glass fiber filters to improve their antibacterial properties using glycidyltrimethylammonium chloride (GTAC), a type of quaternary ammonium salt. The glass fiber filters treated with GTAC were placed into the Ag colloid and heat-treated at 43 °C for 90 min to attach AgNPs to the glass fiber filters. The glass fiber filters with the attached AgNPs were then analyzed by scanning electron microscopy and atomic force microscopy (AFM). The surface morphology of the glass fiber filters treated with GTAC and AgNPs was observed. The Ag atomic % of the glass fiber filters was analyzed according to the GTAC concentration, Ag colloid concentration, and AgNPs treatment temperature. The surface roughness of the glass fiber filters with the attached AgNPs was measured by AFM. The antibacterial tests of the GTAC and AgNP-treated glass fiber filters highlighted the sufficient antibacterial effects against E. coli, S. aureus, and P. aeruginosa. In particular, the antibacterial properties of glass fiber filters against S. aureus and P. aeruginosa were improved when the glass fiber filters were treated with both GTAC and AgNPs.  相似文献   

13.
New generation wound dressings require the criteria that both bioactive and conventional wound dressing materials can recompense the fundamental properties like defense of wound from microbial invasion, dehydration during the wound care duration and mimic the healing process. In this study, functional double-layered nanofibrous composite membranes were fabricated via electrospinning method. The matrices consist of a sheet of ampicillin loaded poly(2-hydroxylethyl methacrylate/polyacrylic acid (pHEMA/pAA) nanofibers on the upper side (first layer: pH sensitive antibacterial barrier) and a sheet of poly(ε-caprolactone) (PCL)/gelatin nanofibers (second layer: bioactive part). Ampicillin was successfully incorporated to double-layered matrices which greatly changed the mechanical properties, biodegradability and water uptake ratios (up to 4 fold higher values). The success of the antimicrobial activity of ampicillin on Staphylococcus aureus and Escherichia coli was indicated by the inhibition zone test. pH sensitivity was confirmed by the swelling and ampicillin release studies by shifting pH value to basic environment. Thus, double-layered pHEMA-pAA nanofibers suggest as a potential wound dressing material for its pH sensitive drug delivery ability and its bioactive part.  相似文献   

14.
Pre-loading of monochlorotriazinyl β-Cyclodextrin (MCT-βCD) onto/within viscose/wool (V/W) and cotton/wool (C/W) blended fabrics provide hosting cavities that can form host-guest inclusion complexes with reactive dyes in postprinting as well as with triclosan derivative or silver nanoparticles/hyperbranched polyamide-amine (AgNPs/HBPAA) composite in subsequent final antibacterial finishing step. Coloration properties, antibacterial activity against (S. aureus) and (E. coli) pathogenic bacteria, durability of the obtained products, according to the above mentioned route, to wash, surface morphology and composition of selected samples were investigated. Results obtained signify that premodification of the nominated substrates with MCT-βCD (10 g/l), followed by reactive printing with mono-or bifunctional reactive dye (20 g/l), and subsequent post-finishing with triclosan derivative or AgNPs/HBPAA composite (15 g/l each) is an efficient treatments sequence for attaining reactive prints with significant antibacterial efficacy and noticeable durability to wash. Surface depositions of selected active ingredients were also confirmed using SEM and EDX analysis.  相似文献   

15.
A novel antibacterial agent polysulfopropylbetaine (PSPB) bearing carboxyl groups was synthesized and its application on cotton fabric to provide durable antibacterial property was also presented. The successful synthesis of PSPB and its immobilization onto the cotton fabric surface were verified by a series of tests including FTIR, 1H NMR, XPS and SEM. Viable cell counting method was employed to investigate antibacterial properties of the finished cotton fabrics. It was found that the cotton fabrics treated with PSPB were endowed with desirable antibacterial activity against both gram-negative bacteria Esherichia coli (E.coli, AATCC 6538) and gram-positive bacteria Staphylococcus aureus (S.aureus, AATCC 25922), with the bacterisotatic rates of 99.69 % and 99.95 %, respectively. Notably, the bacterial reduction rates still maintained over 90 % against both bacteria even after 50 consecutive laundering cycles. Moreover, tests concerning the hydrophilicity, air permeability, water vapor transmission, mechanical properties as well as thermal properties were carried out systematically. The experimental results indicated the hydrophilic performance, air permeability and moisture penetrability of the cotton fabrics finished with PSPB were improved greatly in spite of a slight reduction in thermal performance and little obvious influence on mechanical performance. The antibacterial cotton fabric has the potential to be applied in sportswear, underwear, household textiles, medical fields and much more.  相似文献   

16.
Functionalization of cellulosic nanofibers was established to develop antibacterial bandages. The functionalization was conducted through preparation of carboxymethyl cellulose (CMC) containing different metal nanoparticles (MNPs) such as copper nanoparticles (CuNPs), iron nanoparticles (FeNPs) and zinc nanoparticles (ZnNPs). Fourier Transform Infrared spectroscopy was used to characterize CMC containing MNPs and scanning electron microscopy coupled with high energy dispersive X-ray (SEM-EDX) to study the surface morphology of CMC with and without MNPs. Furthermore, back scattering electron detector was used to show the position of metal nanoparticles on the microcrystalline CMC. In addition, UV-visible spectroscopy was used to confirm MNPs formation. Nanofiber mats of CMC containing MNPs were synthesized using electrospinning technique. Surface morphology of electrospun CMC containing MNPs was characterized using SEM. The obtained data revealed that elctrospun CMC nanofibers containing MNPs were smooth and uniformly distributed without bead formation. The average fiber diameters were in the range of 150 to 200 nm and the presence of MNPs in the nanofiber did not affect the size of the electrospun nanofiber diameter. Transmission electron microscopy (TEM) images displayed that MNPs were existed inside and over the surface of the electrospun nanofibers without any agglomeration. The average particle diameters of MNPs were 29-39 nm for ZnNPs, 23-27 nm for CuNPs and 22-26 nm for FeNPs. Moreover, Water uptake of electrospun nanofiber mats and the release of MNPs from nanofibers were evaluated. Nevertheless, electrospun CMC nanofibers containing MNPs had an excellent antibacterial activity against Gram-negative bacteria Escherichia coli and Gram-positive bacteria Staphylococcus aureus.  相似文献   

17.
Cobaltous sulfate heptahydrate (CoSO4·7H2O) was incorporated as filler into diglycidyl ether of bisphenol A (DGEBA) based epoxy resin system, to prepare organic-inorganic polymer hybrid materials. Mechanical tensile studies and dynamic mechanical analysis (DMA) were carried out in order to study the static and dynamic mechanical properties of the prepared hybrid films. Mechanical tensile studies were carried out at room temperature, at a test speed of 30 mm/min. Highest tensile strength of 24.74±2.42 MPa was achieved for 4.44 wt% filler level (FL), along with an increase in the value of Young’s modulus. Storage modulus (E′), loss modulus (E″), damping factor (tan δ) were obtained by DMA studies. Glass transition temperature (Tg) was obtained for pure epoxy and filled epoxy, for various FLs varying from 0.28 wt% to 5.00 wt%. Pure epoxy showed highest Tg value compared to filled epoxy hybrids. Highest storage modulus of 9.5 GPa was obtained for 2.22 wt% FL, which also showed highest loss modulus peak. Parameters like effectiveness coefficient (C) and crosslink density were calculated from the storage modulus data. Loss modulus and tan δ curves were analyzed to study the energy dissipation properties of prepared hybrid films. Activation energy (Ea) value for glass transition was obtained from damping factor (tan δ), which showed highest Ea value of 630.5 kJmol-1, for 4.44 wt% FL. DMA studies for various FLs were carried out at different test frequencies in order to study the changes in dynamic mechanical properties of the prepared hybrid materials with respect to frequency  相似文献   

18.
With the increased risk of disease transmissions and cross-infection caused by microorganisms, the control of microbial infections becomes a very important issue in modern societies. Moreover, with the emergence of antibio-resistant bacterial strains, it is necessary to control the bacterial growth. One of ways to limit the bacterial proliferation is to develop antimicrobial surfaces. The present work describes the synthesis process of a direct linking of propargyled Triclosan to a modified Kraft Pulp. Propargylated Triclosan, and azidated Kraft Pulp were linked in the presence of Cu(I) catalyst, a type of Huisgen’s 1,3-dipolar azide-alkyne cycloaddition reaction, leading to the formation of Triclosan linked to kraft Pulp fibers. The modified Kraft Pulp fibers are characterized by Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). This novel material has been investigated for its antibacterial properties against Escherichia coli, Staphylococcus aureus, Bacillus cereus and Pseudomonas aeruginosa. The developed material showed an important antibacterial activity. Although Triclosan is covalently grafted onto Kraft Pulp, its antibacterial properties are maintained.  相似文献   

19.
There has been growing interest in the use of bioresource waste for natural dyeing and finishing. This paper discusses dye extraction from the novel source fruit shell waste of Sterculia foetida and its application on mulberry silk fabric to confer aesthetic coloration and wellness properties such as ultra-violet (UV) protection and antibacterial properties. Treated fabrics showed a substantial increase in color depth and adequate wash, light, and rubbing fastness properties for dyed silk fabrics with and without mordanting. Pre-and post-mordanting of silk fabrics were carried out using mordants such as alum, harda (myrobalan), and copper sulfate. UV-visible spectrophotometric analysis of fruit shell extract (FSE) at different pHs and FSE with three different mordants at neutral pH was used to understand the phenomena of dye-fiber interaction. The treated fabrics characterised by ATR-FTIR, SEM-EDS, and XRD analysis indicate the nature of dye fiber interaction justifying the multifunctional properties. The treated fabric also showed very good ultraviolet protection property and antibacterial properties both against S. aureus and E. coli bacteria even after ten washes. The results indicate that Sterculia foetida fruit shell extract offers an excellent potential as coloration, antibacterial, and ultraviolet protective agent for mulberry silk fabric.  相似文献   

20.
A series of novel polyacrylonitrile fibers (PANF) with organophosphorus groups (OPh-PANF) showing unique antibacterial activities were synthesized in our previous studies. To understand the antibacterial mechanism of OPh-PANF, E. coli was selected as the model of Gram-negative bacteria and a list of biological experiments were conducted and analyzed in the current study. Results from scanning electron microscope (SEM), transmission electron microscope (TEM) and flow cytometry (FCM) analyses showed that the integrity of the cell membrane was severely damaged, causing a large number of intracellular potassium ions and macromolecular proteins leaking out of the cells. In addition, OPh-PANF can disrupt the intracellular enzyme systems by FCM analysis. Results from sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and mass spectrometry (MS) analyses showed that after exposure to OPh-PANF, specific protein bands disappeared or weakened, indicating that OPh-PANF mainly inhibited synthesis and expression of structural proteins (OmpA) and functional proteins (HtpG, AhpC, FNM, CAD). On the basis of the above results, an antibacterial mechanism was proposed for OPh-PANF against E. coli. When OPh-PANF was exposed to E. coli, the first step was to adsorb E. coli on its surface, then organophosphorus groups pre-grafted on the fibers began to execute the function of killing bacteria through three combined ways, i.e. destruction of cell membrane structure, disordering of enzyme system and inhibition of protein synthesis.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号