首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
The potential market for single-ribbed bellies and Boston butts in South Korea was characterized and quantitative selection criteria were identified for use by U.S. packers when selecting pork for export. South Korean retail meat market managers and traders/wholesalers in Seoul and Pusan were interviewed and asked to identify the quality attributes that are considered when making pork-purchasing decisions. In addition, pork labeling characteristics and meat display case measurements and space allocations were recorded in each retail store. Data from box labels were recorded in retail storage coolers to characterize pork products currently being merchandized in South Korea. Sample retail packages of belly and butt slices were collected and sent to a commercial laboratory for analysis of iodine values, ether-extractable fat content, total aerobic plate count (APC), total coliform count (TCC), and generic Escherichia coli count (ECC). No quality attributes of U.S. products exceeded the expectations of retailers. Quality attributes of U.S. pork products that exceeded the expectations of traders included presence of foreign material, marbling, tenderness, juiciness, flavor, and overall eating satisfaction. Traders/wholesalers assigned negative ratings for overall workmanship and adherence to purchase criteria for U.S. pork products. Retail APC for South Korean belly samples were higher (P < 0.05) than APC for U.S. belly samples. Retail TCC and ECC for butts and belly samples and APC for butt samples did not differ by country of origin. Retail prices for South Korean bellies were higher (P < 0.05) than prices for retail U.S. and Danish bellies. Pork butt prices did not differ (P > 0.05) by country of origin. Beef, pork, and poultry products comprised 66.8, 27.8, and 5.4%, respectively, of the total meat display case frontage. U.S. beef products occupied, on average, 18% of the total beef display area, whereas U.S. pork products comprised 2.6% of the total pork display case area.  相似文献   

2.
Crossbred pigs (n = 216) were used to test the interaction, if any, of ractopamine (RAC) and dietary fat source on the characteristics of fresh pork bellies. Pigs were blocked by BW (77.6 +/- 6.5 kg) and allotted randomly to pens (6 pigs/pen). After receiving a common diet devoid of RAC for 2 wk, pens within blocks were assigned randomly to 1 of 4 treatments arranged in a 2 x 2 factorial design, with 5% fat (beef tallow vs. soybean oil) and RAC (0 vs. 10 mg/kg). At the conclusion of the 35-d feeding period, pigs were slaughtered at a commercial pork packing plant (average BW of 108.8 +/- 0.6 kg), and fresh bellies were captured during carcass fabrication. Neither RAC (P = 0.362) nor fat source (P = 0.247) affected belly thickness. Subjective (bar-suspension) or objective (compression test) measures of belly firmness were not (P > or = 0.148) affected by the inclusion of RAC in the diet; however, bellies from pigs fed soybean oil (SBO) were softer than those from pigs fed beef tallow (BT), as indicated by perpendicular (P < or = 0.005) and parallel (P < 0.001) suspensions. Moreover, bellies from BT-fed pigs required more (P = 0.096) force to compress 50% of their thickness than bellies from SBO-fed pigs (52.29 vs. 43.51 kg). Color (L*, a*, and b* values) of the belly lean and fat was not (P > or = 0.131) affected by RAC, and lean color was similar (P > or = 0.262) between fat sources; however, belly fat from BT-fed pigs was lighter (P = 0.030) and redder (P = 0.013) in color than belly fat from SBO-fed pigs. Bellies of SBO-fed pigs had greater (P < 0.001) proportions of PUFA and lower (P < 0.001) proportions of SFA and MUFA than belly fat from pigs fed BT. Regardless of the RAC inclusion level, PUFA:SFA and iodine values were lower in belly fat from pigs fed BT than SBO; however, within SBO-fed pigs, PUFA:SFA and iodine values were further increased by feeding RAC (RAC x fat source, P < 0.001). As expected, dietary fat source altered the fatty acid composition of fresh pork bellies, which subsequently impacted fresh belly firmness. Interestingly, including RAC in swine finishing diets exacerbated the effect of feeding SBO on pork fat polyunsaturation.  相似文献   

3.
The objective of this research was to make available bioelectrical impedance technology for the prediction of kilograms of lean and kilograms of fat-free muscle of Boston butts. Seventy butts were removed from 70 pork carcasses according to standard procedures (NAMP, #406), with the exception that the fat was not removed. After the weight in kilograms (BUTT) and internal temperature in degrees centigrade (TEMP) were recorded, each butt was measured for resistance (Rs, ohms), reactance (Xc, ohms), and distance (L, centimeters) between detector terminals four different ways: parallel or perpendicular to the top of the carcass and on either lean surface or fat surface of the cut. Each cut was physically separated into lean, fat, and bone. Chemical composition (moisture, protein, and fat) was determined on the lean portion. Variable selection analysis was used to develop equations for predicting kilograms of lean and kilograms of fat-free muscle of Boston butts. Results of measurements of the four sites were quite similar; however, measuring perpendicularly on the lean surface is recommended. The prediction equation for kilograms of lean from measurements thus taken is as follows: .461-.0304 x TEMP + .576 x BUTT - .0118 x Rs + .00845 x Xc + .0630 x L. The respective coefficients of these independent variables for predicting kilograms of fat-free muscle are .537, -.0415, .479, -.0139, .00804, and .0764. In an industry application of these coefficients, recording temperature would not be imperative because the temperature range would be sufficiently narrow to render temperature of little practical influence when separating butts according to leanness.(ABSTRACT TRUNCATED AT 250 WORDS)  相似文献   

4.
This study was designed to observe the effects of conjugated linoleic acid (CLA) supplementation on lean content of pork carcass primal cuts (hams, loins, and bellies) and to determine the ability of total body electrical conductivity (TOBEC) to predict lean content. A total of 64 crossbred growing-finishing barrows were placed on a control (soybean oil) or CLA (0.75%) diet at an average weight of 40 kg. Pigs were penned in pairs according to diet and stress genotype (negative, carrier, and positive) and slaughtered at 115 kg. Stress genotype was included because of known variations in lean content. Hams (IMPS 401A; n = 64), loins (IMPS 410; n = 24), and bellies (IMPS 408; n = 63) were fabricated from carcasses at 24 h postmortem and scanned for electromagnetic (EM) absorption by a MQ-25 EM scanner. Each wholesale cut was scanned in triplicate at 2.5 MHz to yield a peak mean average (PMA) value then separated into lean, fat, bone, and skin components. Bellies were skinned prior to scanning then subjected to a belly bar firmness test before dissection. Supplementation with CLA had no effect (P > 0.05) on lean ham composition. Regression analysis was used for lean weight prediction using primal weight and PMA value as predictors. Lean content prediction of hams by TOBEC resulted in an R2 of 0.80. Loins from CLA-supplemented pigs exhibited increased lean weight (P < 0.05) and PMA values (P < 0.05) compared to controls. Lean prediction of loins by TOBEC resulted in an R2 of 0.66. Bellies from CLA-supplemented pigs had a higher percentage of moisture (P < 0.03) and protein (P < 0.01) and decreased percentage of lipid (P < 0.01). The R2 values from the regression analysis predicting protein, moisture, protein + moisture, and fat-free soft tissue composition of the skinless bellies were 0.67, 0.68, 0.71, and 0.78, respectively.  相似文献   

5.
Crossbred pigs (n = 216) were used to test the effect of supplemental L-carnitine (CARN) on the fatty acid composition and quality characteristics of fresh pork bellies from pigs fed diets formulated with different inclusion levels of corn oil. Pigs were blocked by BW (43.6 ± 1.0 kg) and allotted randomly to pens of 6 pigs within blocks. Then, within blocks, pens were assigned randomly to 1 of 6 dietary treatments in a 2 × 3 factorial arrangement, with either 0 or 100 mg/kg of supplemental CARN and 3 dietary inclusion levels (0, 2, or 4%) of corn oil (CO). When the lightest block weighed 125.0 kg, all pigs were slaughtered, and left-side bellies were captured during carcass fabrication for quality data collection. Fresh pork bellies were evaluated for length, width, thickness, and firmness (bar-suspension and Instron-compression methods) before a 2.5-cm-wide strip of belly was removed and subsequently dissected into subcutaneous fat, primary lean (latissimus dorsi), secondary lean (cutaneous trunci), and intermuscular fat for fatty acid composition determination. Although belly length, width, and thickness of fresh pork bellies were not affected by CARN (P ≥ 0.128) or CO (P ≥ 0.073), belly firmness decreased linearly (P < 0.001) with increasing dietary CO, but there was no (P ≥ 0.137) effect of CARN on any belly firmness measure. Dietary CARN increased (P < 0.05) the proportion of total SFA in the intermuscular fat layer, increased (P < 0.05) the proportion of total MUFA in the primary and secondary lean layers, and decreased (P < 0.05) the proportion of total PUFA in the intermuscular fat and secondary lean layers of pork bellies. Moreover, the SFA and MUFA compositions decreased linearly (P < 0.001) with increasing dietary CO, and the rate of the decrease in SFA composition was greater (P < 0.001) in the fat layers than the lean layers. Conversely, the PUFA content increased linearly (P < 0.001) with increasing dietary CO, and the rate of the increase in PUFA was greater (P < 0.001) in the fat than the lean layers, and greater (P = 0.022) in the primary than secondary lean layer. Results from this study would indicate that differences in the amount and rate of fatty acid deposition associated with feeding increased amounts of CO, along with moisture differences among the belly layers, combine to negatively affect fresh pork belly firmness.  相似文献   

6.
The effects of fat supplementation of swine diets, packaging, and storage conditions on sensory evaluations and processing characteristics of bacon were evaluated. Five corn-soy dietary treatments, with eight replications each, were supplemented with one of the following fat sources: 10% catfish oil (10FO); 10% catfish meal (10FM); 10% restaurant grease (10RG); 5% catfish meal (5FM); 5% catfish oil (5FO); 13.99% protein corn-soybean meal non-supplemented control (C). After collecting back fat samples for fatty acid analysis, the bellies were processed into bacon, cut into thirds, sliced, and vacuum-packaged or packed in a micarin-coated corrugated cardboard box. After initial evaluation for color scores, surface texture values, and fishy and rancid odors, they were assigned to either vacuum or non-vacuum packaging and either refrigerated or frozen storage for 1, 7, or 13 wk. There were few differences (P>0.05) in fat texture, or fishy or rancid odors in the fresh product. Sensory panel results showed that bacon from hogs fed a 10FO diet scored lower (P<0.05) in overall liking than bacon from C, 10FM, or 5FO diets. Sliced non-vacuum-packaged, frozen bacon was more rancid (P<0.05) and was totally inferior to vacuum-packaged, refrigerated or vacuum-packaged, frozen bacon after 7 and 13 wk storage.  相似文献   

7.
The objective of this study was to develop prediction equations for estimating proportional carcass yield to a variety of external trim levels and bone-in and boneless pork primal cuts. Two hundred pork carcasses were selected from six U.S. pork processing plants and represented USDA carcass grades (25% USDA #1, 36% USDA #2, 25% USDA #3, and 14% USDA #4). Carcasses were measured (prerigor and after a 24 h chill) for fat and muscle depth at the last rib (LR) and between the third and fourth from last rib (TH) with a Hennessy optical grading probe (OGP). Carcasses were shipped to Texas A&M University, where one was randomly assigned for fabrication. Selected sides were fabricated to four lean cuts (ham, loin, Boston butt, and picnic shoulder) then fabricated progressively into bone-in (BI) and boneless (BL) four lean cuts (FLC) trimmed to .64, .32, and 0 cm of s.c. fat, and BL 0 cm trim, seam fat removed, four lean cuts (BLS-OFLC). Total dissected carcass lean was used to calculate the percentage of total carcass lean (PLEAN). Lean tissue subsamples were collected for chemical fat-free analysis and percentage carcass fat-free lean (FFLEAN) was determined. Longissimus muscle area and fat depth also were collected at the 10th and 11th rib interface during fabrication. Regression equations were developed from linear carcass and OGP measurements predicting FLC of each fabrication point. Loin muscle and fat depths from the OPG obtained on warm, prerigor carcasses at the TH interface were more accurate predictors of fabrication end points than warm carcass probe depth obtained at the last rib or either of the chilled carcass probe sites (probed at TH or LR). Fat and loin muscle depth obtained via OGP explained 46.7, 52.6, and 57.1% (residual mean square error [RMSE] = 3.30, 3.19, and 3.04%) of the variation in the percentage of BI-FLC trimmed to .64, .32, and 0 cm of s.c. fat, respectively, and 49.0, 53.9, and 60.7% (RMSE = 2.91, 2.81, and 2.69%) of the variation in the percentage of BL-FLC trimmed to .64, .32, and 0 cm of s.c. fat, respectively. Fat and loin muscle depth from warm carcass OGP probes at the TH interface accounted for 62.4 and 63.5% (RMSE = 3.38 and 3.27%) of the variation in PLEAN and FFLEAN, respectively. These equations provide an opportunity to estimate pork carcass yield for a variety of procurement end point equations using existing on-line techniques.  相似文献   

8.
An experiment was conducted to determine prediction equations that used readings for total body electrical conductivity (TOBEC) in the model for estimation of total fat-free lean and total fat weight in the pork carcass. Ultrasound measurements of live hogs were used to select 32 gilts that represented a range in weight, muscling, and fatness. The TOBEC readings were recorded on warm carcass sides, chilled carcass sides, and the untrimmed ham from the left carcass side. Physical dissection and chemical analyses determined fat-free lean and fat weight of the carcass. All of the ham tissues were analyzed separately from the remainder of the carcass tissues to incorporate ham measurements for prediction of total fat-free lean and total fat weight in the entire carcass. Prediction equations were developed using stepwise regression procedures. An equation that used a warm carcass TOBEC reading in the model was determined to be the best warm TOBEC equation (R2 = 0.91; root mean square error = 0.81). A three-variable equation that used chilled carcass TOBEC reading, chilled carcass temperature, and carcass length in the model was determined to be the best chilled TOBEC equation (R2 = 0.93; root mean square error = 0.73). A four-variable equation that included chilled carcass side weight, untrimmed ham TOBEC reading, ham temperature, and fat thickness beneath the butt face of the ham in the model was determined to be the best equation overall (R2 = 0.95; root mean square error = 0.65). The TOBEC and the fat-free lean weight of the ham are excellent predictors of total carcass fat-free lean weight.  相似文献   

9.
Crossbred pigs (n = 216) were used to test the interactive effect, if any, of ractopamine (RAC) and dietary fat source on the performance of finishing pigs, pork carcass characteristics, and quality of LM chops during 5 d of simulated retail display (2.6 degrees C and 1,600 lx warm-white fluorescent lighting). Pigs were blocked by BW and allotted randomly to pens (6 pigs/pen), and, after receiving a common diet devoid of RAC for 2 wk, pens within blocks were assigned randomly to 1 of 4 diets in a 2 x 2 factorial arrangement, with 5% fat [beef tallow (BT) vs. soybean oil (SBO)] and RAC (0 vs. 10 mg/kg). Diets were formulated to contain 3.1 g of lysine/Mcal of ME and 3.48 Mcal/kg of ME. Across the entire 35-d trial, pigs fed RAC had greater (P < 0.01) ADG and G:F, but RAC did not affect (P = 0.09) ADFI; however, performance was not affected (P >or= 0.07) by dietary fat source. Carcass weight, LM depth, and lean muscle yield were increased (P < 0.01), whereas fat depth was decreased (P = 0.01), in carcasses from RAC-fed pigs; however, carcass composition measures were similar (P >or= 0.27) between fat sources. Feeding 10 mg/kg of RAC reduced (P 相似文献   

10.
Pea chips are produced as a by-product when field peas are processed to produce split peas for human consumption. The objective of this experiment was to test the hypothesis that inclusion of pea chips in diets fed to finishing pigs does not negatively influence pig growth performance, carcass composition, and the palatability of pork. A total of 24 barrows (initial BW: 58.0 ± 6.6 kg) were allotted to 1 of 4 treatments and fed early finishing diets for 35 d and late finishing diets for 35 d. A corn-soybean meal (SBM) control diet and 3 diets containing pea chips were formulated for each phase. Pea chips replaced 33.3, 66.6, or 100% of the SBM in the control diet. Pigs were housed individually, and all pigs were slaughtered at the conclusion of the experiment. Overall, there were no differences (P > 0.11) in final BW, ADFI, and G:F of pigs among treatments, but there was a quadratic response in ADG (P = 0.04), with the smallest value observed in pigs fed the control diet. Dressing percentage linearly decreased (P = 0.04) as pea chips replaced SBM in diets, but there were no differences (P > 0.20) among treatments in HCW, LM area, 10th-rib backfat, lean meat percentage, and marbling. Likewise, pH in loin and ham, drip loss, and purge loss were not influenced (P > 0.13) by treatment. However, there was a quadratic response (P = 0.08) in 24-h pH in the shoulder, with the smallest value present in pigs fed the diet, in which 66.6% of the SBM was replaced by pea chips. Subjective LM color and Japanese color score standard were reduced (quadratic, P = 0.03 and 0.05, respectively) and LM b* values and hue angle were increased (quadratic, P = 0.09 and 0.10, respectively) when pea chips replaced SBM in the diets. Ham L* (quadratic, P = 0.04), a* (linear, P = 0.02), b* (quadratic, P = 0.07), color saturation (linear, P = 0.02), and hue angle (quadratic, P = 0.05) were increased when pea chips replaced SBM. However, there were no differences (P > 0.16) in shoulder and fat color. Moreover, cook loss percentage, shear force, juiciness, and pork flavor of pork chops were not different (P > 0.10) among treatments, but tenderness of pork chops linearly decreased (P = 0.04) as SBM replaced pea chips. It is concluded that all the SBM in diets fed to growing-finishing pigs may be replaced by pea chips without negatively influencing growth performance or carcass composition. However, pigs fed pea chips will have pork chops and hams that are lighter, and chops may be less tender if pigs are fed pea chips rather than corn and SBM.  相似文献   

11.
The M. quadriceps femoris from USDA Choice (n = 12) and USDA Select (n = 12) carcasses were fabricated traditionally (COLD) or innovatively (HOT), in which the seams it shares with the top round and bottom round were separated prerigor to evaluate positional and locational effects on Warner-Bratzler shear force (WBSF), sensory attributes, and objective color. At slaughter, paired USDA Choice and USDA Select carcasses were alternately assigned either the HOT or COLD treatment. At 48 h postslaughter, subprimals were removed, vacuum-packaged, and aged for an additional 5 d. After aging, the M. quadriceps femoris was cut into 2.54-cm-thick steaks and allowed to bloom 1 h. For the M. rectus femoris (REC) and M. vastus lateralis (VAL), L* values significantly (P < 0.050) decreased when moving from the proximal to distal position within the muscle. Similarly, a* and b* values decreased in the VAL when moving from the proximal to the distal aspect. After color measurement, steaks were vacuum-packaged and frozen (-26 degrees C) until shear and sensory data were collected. Significant position (proximal to distal) and location effects (cranial to caudal) were noted for both muscles. However, treatment did not affect WBSF of the VAL. Although intramuscular variation existed, WBSF and sensory panel tenderness ratings were acceptable for the REC. Although WBSF values were greater and tenderness ratings were less than the REC, the VAL were not extremely tough and therefore could be used in enhancement applications.  相似文献   

12.
Growth, development, and carcass composition in five genotypes of swine.   总被引：3，自引：0，他引：3  
An experiment with 127 barrows representing five genotypes, 1) H x HD, 2) SYN, 3) HD x L[YD], 4) L x YD, and 5) Y x L (H = Hampshire, D = Duroc, SYN = synthetic terminal sire line, L = Landrace, and Y = Yorkshire), was conducted to evaluate growth and development of swine from 59 to 127 kg live weight. Animals were allowed ad libitum access to a pelleted finishing diet containing 18.5% CP, .95% lysine, and 10.5% fat, with an energy density of 3,594 kcal of ME/kg. Pigs were serially slaughtered at either 59, 100, 114, or 127 kg live BW. After slaughter, carcasses were chilled and backfat was measured at four locations. The right side of each carcass was fabricated into primal cuts of ham, loin, Boston Butt, picnic, and belly. Composition of each primal cut was determined by physical dissection into lean, fat, bone, and skin. Estimated allometric growth coefficients for carcass length, carcass weight, and longissimus muscle area relative to BW; carcass lean, fat, bone, and skin relative to both BW and carcass weight; and lean in each of the primal cuts relative to total carcass lean did not differ (P greater than .05) among genotypes. Relative to BW, the pooled growth coefficient(s) for carcass weight was (were) greater (P less than .001) than unity, whereas those for carcass length, longissimus muscle area, and backfat at first rib were smaller (P less than .001) than unity. Those for other backfat measurements were close to 1.00. Relative to either BW or carcass weight, the pooled coefficient(s) for fat was (were) greater (P less than .001) than unity, whereas those for lean, bone, and skin were smaller (P less than .001) than unity. Growth of lean, backfat, bone, and skin in the carcass were nearly linearly associated with increases in BW. The increase in fat weight was curvilinear as the pig grew and was accelerated in later growth stages, indicating that carcass fat percentage increased with increased BW.  相似文献   

13.
One hundred eighty barrows were evaluated to determine the effects of ractopamine hydrochloride (RAC) on lean carcass yields and pork quality. The pens were blocked by weight (six pens per block) with starting block weights of 69.0, 70.7, 73.8, 76.6, 78.4, and 84.3 kg. Pens within a block were assigned randomly to one of three RAC treatments so each treatment in a block was replicated twice. Treatments (as-fed basis) included control diet, 10 ppm of RAC added (R10), and 20 ppm of RAC added (R20) and ranged from 25 to 41 d depending on block. Pigs were slaughtered by blocks when block average live weights were 109 kg. Gain and feed efficiency were improved (P < 0.05) with increasing dietary concentrations of RAC, but feed intake did not differ (P > 0.05). Dressing percentage was higher (P < 0.05) for RAC-treated pigs. Subjective color, firmness, marbling scores, and Minolta L* reflection of the LM were not different (P > 0.05) among treatments. Carcass weights were heavier (P < 0.05) for pigs treated with RAC compared with control pigs and were higher for R20 than for R10. The RAC-fed pigs had greater (P < 0.05) yields (actual and percentage of HCW) of the following Institutional Meat Purchase Specification (IMPS) cuts than control pigs: trimmed, boneless ham (IMPS-402C and IMPS-402G), loin (IMPS-414), sirloin, and Boston butt (IMPS-406A). Pigs treated with RAC had a greater (P < 0.05) percentage of fat-free lean trimmings (IMPS-418) than did control pigs. Pigs treated with the R20 concentration had increased (P < 0.05) water-holding capacity compared with control pigs. Purge loss decreased linearly (P < 0.05) with increasing RAC compared with control for 14-d aged, non-enhanced loins. Warner-Bratzler shear (WBS) force values measured for nonenhanced chops were greater for RAC-treated pigs than for control pigs with a low dose response (P = 0.001). Enhanced chop (salt and phosphate injection) WBS values did not differ (P > 0.05) among dietary treatments. Trained sensory evaluation panel results for tenderness decreased in a low-dose plateau response fashion for nonenhanced chops (P = 0.004). Tenderness of enhanced chops decreased linearly (P = 0.04) with increasing RAC concentrations. No differences (P > 0.05) were found in juiciness or flavor of enhanced or nonenhanced chops. Feeding RAC to late-finishing swine resulted in faster growing, more efficient animals with increased boneless subprimal yields, and it had little effect on pork juiciness and flavor.  相似文献   

14.
This study evaluated the use of visible and near-infrared (VISNIR) spectroscopy to predict lean color stability in pork loin chops. Spectra were collected immediately after and approximately 1 h after rib removal on 1,208 loins. Loins were aged for 14 d before a 2.54-cm chop was placed in simulated retail display. Spectra were collected on aged loins immediately after removal from the vacuum package and on chops 10 min after cutting. Instrumental color measurements [L*, a*, b*, hue angle, chroma, and E (overall color change)] were determined on d 0, 1, 7, 11, and 14 of display. Principal components analysis of display d 0 and 14 values of these traits identified a factor (first principal component; PC1) explaining 67% of the variance that was related to color change. Partial least squares regression was used to develop 3 models to predict PC1 values by using VISNIR spectra collected in the plant, on aged loins, and on chops. Loins with predicted PC1 values less than 0 were classified as having a stable color, whereas values greater than 0 were classified as having a labile lean color. Loins classified as stable by the in-plant model had smaller (P < 0.05) L* values than those classified as labile. Hue angle and ΔE values were less (P < 0.05) and a* and chroma values were greater (P < 0.05) after d 7 of display in loins predicted to have a stable color than in loins predicted to have a labile lean color. Similarly, chops from loins classified as stable using the aged loin model had smaller (P < 0.05) L* values than those from loins classified as labile. Furthermore, loins predicted to be stable had smaller (P < 0.05) hue angle and ΔE values and greater (P < 0.05) a* and chroma values after d 7 of display than did loins predicted to be labile. Results for the chop model were similar to those from the 2 loin models. Chops predicted to have a stable lean color had smaller (P < 0.05) L* values than did those predicted to have a labile lean color. Chops classified as stable had smaller (P < 0.05) hue angle and ΔE values and greater (P < 0.05) a* and chroma values after d 7 of display compared with chops classified as labile. All 3 models effectively segregated chops based on color stability, particularly with regard to redness. Regardless of the model being used, d 14 display values for a*, hue angle, and ΔE in loins classified as stable were similar to the d 7 values of loins classified as labile. Thus, these results suggest that VISNIR spectroscopy would be an effective technology for sorting pork loins with regard to lean color stability.  相似文献   

15.
The objectives of this study were to determine the value of supplementing creatine monohydrate (CMH) in a complete swine finishing ration and determining its effects on meat quality. Crossbred barrows (n = 59) were allotted five pens per treatment with three pigs per pen. Dietary treatments, including 20 g CMH x pig(-1) x d(-1) fed for 5, 10, or 15 d before slaughter, were compared to control pigs that received no CMH. The basal diet was a corn-soybean meal finishing diet. At 123.5 kg, pigs were delivered to a commercial packing plant (80 km) and slaughtered according to industry practices. After a 24-h chill at 4 degrees C, right-side loins were collected from the fabrication line and vacuum-packaged for delivery to the University of Missouri Meat Lab. Hams were scanned for lean content by a primal cut electromagnetic scanner. After scanning, ham pH and light reflectance (L*, a*, b*) were obtained on the gluteus medius muscle. Loin pH and light reflectance were obtained at the 10/11th-rib juncture. The posterior section of the boneless loin was weighed, vacuum-packaged, and stored for 7 d at 1 degree C. After aging, light reflectance, weights, and Warner/Bratzler shear force measurements were taken. A linear trend (P = 0.071) was observed for ham 24-h L* values, and a cubic trend was observed for ultimate loin pH (P = 0.102). Hunter L* values of the longissimus possessed a negative linear contrast (P = 0.009) after aging, revealing that the loins of those animals treated for 10 and 15 d exhibit higher L* values. A cubic trend (P = 0.057) was shown for percentage of moisture lost as purge; 5- and 10-d treatments were intermediate to control and 15-d treatments. Warner/Bratzler shear force measurements for chops aged 7 d increased in a linear fashion (P = 0.024). This data suggests that 5-d supplementation of CMH before slaughter improves several pork quality attributes. However, it seems that supplementing CMH in swine diets for 10 or 15 d could reduce the quality of fresh pork.  相似文献   

16.
The objective of the current study was to create an in vitro model that duplicated the development of PSE pork. Postrigor pork chops with various pH values and normal color were vacuum-packaged, and heated at approximately 42 degrees C for various times (0, 15, 30, 60, 120, or 240 min), or heated to temperatures that occur early postmortem (34, 37, 39, or 42 degrees C for 60 or 120 min) in a water bath. Chops were cooled and allowed to bloom, after which changes in Minolta and Hunter color values were assessed, and purge loss was determined. Warming postrigor pork with normal color and pH to early postmortem body temperature for various times successfully duplicated the characteristics of PSE pork. After 60 to 120 min at 42 degrees C or above, chops with pH < 5.8 lightened until L values were similar to those typical of PSE pork (Minolta L = 61.0). Change in chop color depended on length of time the samples were warmed, as well as on pH. Below 34 degrees C, temperature had no (P > or = 0.28) effect on color (Minolta L, a, b, and Hunter L*, a*, b*); however, at higher temperatures, color change depended on pH and warming time. A comparison of the time and temperature relationships for changes in lightness and purge suggested that the mechanisms of the two processes are not identical. The similarities in the dynamic range of color change, change in absolute color values, and time frame for changes in vitro and in vivo suggest similarity of the processes creating PSE in a carcass and in the in vitro model.  相似文献   

17.
One hundred seventy-seven pigs were used to determine the interaction effects of fasting and length of transport prior to harvest on pork muscle quality. The study design was a 2 x 2 x 3 factorial, which involved two genetic sources, fasting (F) or no fasting (N) of pigs 48-h prior to harvest, and three transport times (0.5, 2.5, or 8.0 h) on a semitrailer to the packing plant. Genetic source was a significant source of variation (P < 0.05) for most composition and muscle quality variables. Fasting reduced hot carcass weight 3.6% (P < 0.05), but length of transport did not affect hot carcass weight (P > 0.05). There were no differences (P > 0.05) in percent lean among fasting and transport treatments. Fasted pigs had higher longissimus dorsi (LD) ultimate pH (pHu), darker lean color, higher marbling score and lower 7-d purge loss, 24-h drip loss, and cooking loss (P < 0.05) than nonfasted pigs. Meat from pigs that were transported 8.0 h had lower glycolytic potential (GP), higher LD and semimembranosus (SM) pHu, darker lean color, and lower L*, 7-d purge loss, 24-h drip loss, cooking loss, and shear force values than meat from pigs transported 0.5 h (P < 0.05). Meat from pigs transported 2.5 h had higher LD and SM pHu and lower L*, 7-d purge loss, 24-h drip loss, and cooking loss than meat from pigs transported 0.5 h (P < 0.05). Meat from pigs transported 8.0 h had higher LD pHu and color scores and lower L* and cooking loss than meat from pigs transported 2.5 h (P < 0.05). The fasting x transport interaction was significant for SM pHu, L*, color score, and drip loss. Fasting improved SM pHu, L*, color score, and drip loss for pigs that were transported 0.5 h (P < 0.05), but when pigs were transported for 2.5 h or 8.0 h, fasting had little or no effect on these muscle quality traits. Fasting lowered GP and increased LD pHu for pigs from the genetic source with the higher initial pork quality (P < 0.05), while fasting had no effect on pork quality for pigs from the genetic source with the lower initial pork quality (P > 0.05). Longer transport times resulted in lower GP and higher LD pHu regardless of genetic source. Fasting and length of transport each had positive effects on pork quality, but length of transport effects was greater in magnitude. When pigs were transported for 0.5 h, fasting for 48 h prior to harvest improved pork quality, but when pigs were transported 2.5 or 8.0 h, fasting had little effect on pork quality.  相似文献   

18.
An experiment was conducted to determine the effect of dietary betaine (0, 0.125, 0.250, or 0.500%) on growth, carcass traits, pork quality, plasma metabolites, and tissue betaine concentrations of cross-bred finishing pigs. Four replications of three pigs (two barrows and one gilt) each were used for each treatment. The basal diet contained 0.85 (69 to 88 kg BW) or 0.65% Lys (88 to 115 kg BW). Overall ADG and gain:feed were not affected (P > 0.10) by betaine, but overall ADFI was decreased (quadratic, P < 0.05; 0 vs betaine, P < 0.01) by betaine; pigs fed 0.250% betaine had the lowest ADFI. Loin muscle area, average back-fat, dressing percentage, percentage lean, total fat, lean:fat, and leaf fat weight were not affected (P > 0.10) by betaine. Tenth-rib backfat thickness was decreased (quadratic, P < 0.05; 0 vs betaine, P < 0.05); pigs fed 0.250% betaine had the lowest 10th-rib backfat thickness. Carcass length was increased (linear, P < 0.05; 0 vs betaine, P < 0.10) as the level of betaine was increased. Fat-free lean, lean gain per day, ham weight, ham fat-free lean, and ham percentage lean were increased (quadratic, P < 0.10), but percentage fat, total ham fat, percentage ham fat, and butt-fat thickness were decreased (quadratic, P < 0.10); these traits were respectively highest or lowest in pigs fed 0.250% betaine. Thaw loss and 24-h pH were increased (quadratic, P < 0.10; 0 vs betaine, P < 0.05) and cook loss was decreased (linear, P < 0.05) in pigs fed betaine. The CIE L* value for the biceps femoris was decreased (quadratic, P < 0.10; 0 vs betaine, P < 0.10); pigs fed 0.250% betaine had the lowest CIE L* value. Subjective color, firmness-wetness, marbling, percentage moisture and bound water of the loin muscle, and shear force were not affected (P > 0.10) by betaine. Betaine was not detectable (< 0.07 mg/g) in the loin muscle of pigs fed 0% betaine, but betaine was detectable and relatively constant in pigs fed 0.125, 0.250, or 0.500% betaine (0.22, 0.17, and 0.21 mg/g, respectively). Plasma urea N, total protein, albumin, triglycerides, and HDL cholesterol concentrations were not affected (P > 0.10). Plasma total cholesterol (linear, P < 0.10) and NEFA (quadratic, P < 0.10) were increased in pigs fed betaine. Betaine improved carcass traits when provided at 0.250% of the diet and improved some aspects of pork quality.  相似文献   

19.
A survey of beef muscle color and pH   总被引：4，自引：0，他引：4  
The objectives of this study were to define a beef carcass population in terms of muscle color, ultimate pH, and electrical impedance; to determine the relationships among color, pH, and impedance and with other carcasses characteristics; and to determine the effect of packing plant, breed type, and sex class on these variables. One thousand beef carcasses were selected at three packing plants to match the breed type, sex class, marbling score, dark-cutting discount, overall maturity, carcass weight, and yield grade distributions reported for the U.S. beef carcass population by the 1995 National Beef Quality Audit. Data collected on these carcasses included USDA quality and yield grade data and measurements of muscle color (L*, a*, b*), muscle pH, and electrical impedance of the longissimus muscle. About one-half (53.1%) of the carcasses fell within a muscle pH range of 5.40 to 5.49, and 81.3% of the carcasses fell within a longissimus muscle pH range of 5.40 to 5.59. A longissimus muscle pH of 5.87 was the approximate cut-off between normal and dark-cutting carcasses. Frequency distributions indicated that L* values were normally distributed, whereas a* and b* values were abnormally distributed (skewed because of a longer tail for lower values, a tail corresponding with dark-cutting carcasses). Electrical impedance was highly variable among carcasses but was not highly related to any other variable measured. Color measurements (L*, a*, b*) were correlated (P < 0.05) with lean maturity score (-.58, -.31, and -.43, respectively) and with muscle pH (-.40, -.58, and -.56, respectively). In addition, fat thickness was correlated with muscle pH and color (P < 0.05). There was a threshold at approximately .76 cm fat thickness, below which carcasses had higher muscle pH values and lower colorimeter readings. Steer carcasses (L* = 39.62, a* = 25.20, and b* = 11.03) had slightly higher colorimeter readings (P < 0.05) than heifer carcasses (L* = 39.20, a* = 24.78, and b* = 10.80) even though muscle pH was not different between steer and heifer carcasses. Dairy-type carcasses (pH = 5.59, L* = 37.56, a* = 23.40, and b* = 9.68) had higher muscle pH values and lower colorimeter readings than either native-type (pH = 5.50, L* = 39.55, a* = 25.13, and b* = 11.00) or Brahman-type (pH = 5.46, L* = 39.75, a* = 25.17, and b* = 11.05) carcasses (P < 0.05).  相似文献   

20.
The objectives of this study were to evaluate visual and chemical attributes of beefsteaks from various USDA quality grades and muscles packaged in high-oxygen (80% O2/20% CO2) modified-atmosphere packaging (MAP). A total of nine carcasses were selected to represent Select (n = 3), low Choice (n = 3), and high Choice (n = 3) USDA quality grades. The semimembranosus (SM), semitendinosus (ST), and biceps femoris (BF) muscles were removed from each carcass and allotted to two packaging types (MAP or polyvinyl chloride over-wrap) and were displayed for up to 10 d, with evaluation on d 1, 3, 5, 7, and 10. Fifty-four steaks were evaluated on each day by a five-member trained panel for visual color (lean color and discoloration) and were also analyzed with a Minolta Chroma Meter CR-310 for L* and a* values (lightness and redness, respectively). Chemical properties measured included percentage of metmyoglobin formation and fat content. Visual color scores did not differ (P > 0.05) at d 1 and 3 with respect to all quality grades, but decreased after d 3, with a greater reduction (P < 0.05) in high Choice steaks for both lean color and discoloration. The low Choice steaks packaged in MAP displayedhigher (P < 0.05) lean color scores and less (P < 0.05) discoloration at d 7 and 10 than did Select and high Choice steaks. Redness (a*) values also decreased (P < 0.05) after d 3, whereas (lightness) L* values declined (P < 0.05) from d 1 to 5. The high Choice steaks had higher (P < 0.05) metmyoglobin content than low Choice and Select steaks, but packaging had no effect (P > 0.05) on metmyoglobin content. Muscle type did affect metmyoglobin content; however, the metmyoglobin content of the SM was greatest (P < 0.05), followed by the BF, with the ST having the lowest (P < 0.05) metmyoglobin formation. Results indicate that low Choice steaks react the best in MAP, and the ST maintained greater storage characteristics regardless of quality grade or packaging.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号