共查询到20条相似文献，搜索用时 31 毫秒
1.
Mark Alexander Butler Joseph Dahlen Thomas L. Eberhardt Cristian Montes Finto Antony Richard F. Daniels 《Annals of Forest Science》2017,74(1):20
Key message
Loblolly pine ( Pinus taeda ) logs can be evaluated using acoustic velocity whereby threshold acoustic velocity values can be set to ensure lumber meets specified mechanical property design values for modulus of elasticity.Context
There is a need to better sort logs according to lumber quality for improved decision making and wood utilization because merchantable logs are being harvested from different stand types including natural forests, conventional plantations, and intensively managed plantations, all with differences in rotation ages, growth rates, and wood quality traits.Aims
This study aimed to link tree- and lumber-length log acoustic velocity with the resulting lumber properties as tested in static bending from five intensively managed loblolly pine stands in the Atlantic Coastal Plain of Georgia.Methods
Acoustic velocity was measured using the resonance-based approach on 87 tree-length logs and 244 lumber-length logs. The logs were then processed into 797 pieces of 38 mm by 89 mm (2×4), 140 mm (2×6), 184 mm (2×8), and 235 mm (2×10) dimension lumber, dried, and tested in static bending.Results
Mean MOE of the lumber had moderate relationships with acoustic velocity of the logs (R 2 = 0.49) whereas MOR and acoustic velocity did not have a strong relationship (R 2 = 0.20). Accounting for log position increased the performance of the mean lumber MOE model (R 2 = 0.62) which was further increased by adding green density and small-end diameter (R 2 = 0.67). Utilization of acoustics was effective for segregating logs based on lumber modulus of elasticity and did not depend on knowing tree or stand information such as age, site quality, and silviculture history.Conclusion
Acoustic velocity evaluation of tree- and lumber-length logs could be employed to segregate logs within the supply chain to ensure that lumber would meet specified design values.2.
Guillermo Riesco Muñoz Andrés Remacha Gete Manuel Gasalla Regueiro 《Annals of Forest Science》2013,70(7):695-706
Context
The commercial feasibility of sawmilling depends on the expected volume and value of sawn planks. Models that predict the volume of sawn timber of a particular quality and produced from logs of known characteristics are therefore very useful.Aims
The objectives were to study variation in sawing yield and to obtain models that predict lumber volume and grade recovery on the basis of easy-to-measure predictor variables of saw logs.Methods
Forty-six oak trees growing in Galicia (NW Spain) were felled and cut into logs. The logs were visually graded and sawn mainly into quartersawn planks, which were dried, planed and visually graded for structural purposes.Results
The total volumetric sawing yield was 47.6 %. The sawing yield for planks of structural dimensions (cross-section, 70?×?120 or 70?×?170 mm) was 43.4 %, but decreased to 8.4 % for structural sized and quality grade beams because of wane and biotic damage in many pieces. Log grade did not significantly affect sawing yield in the sample analysed, despite the wide range of diameter over bark at the smallest end in the sampled logs (22–77 cm). The sawing pattern affected total sawing yield (F?=?4.913; p value?=?0.001) and the sawing yield for structural planks (F?=?6.142; p value?=?0.0002); radial sawing with one cut and live sawing of half logs provided the highest yields. Three models were proposed for estimating sawn volume in timber products, with the small-end log diameter over bark as the predictor variable and R adj 2 between 0.31 and 0.78 (p value?<?0.01).Conclusion
For the purpose of producing oak timber destined for structural use, the presence of bark and sapwood in planks must be reduced in the sawing process; this would decrease the total lumber recovery but increase the timber value yield. Air drying must be accelerated to reduce biotic damage in sawn planks. Geometric mean diameter over bark at the smallest end (d) outperforms other measures as a predictor variable for total or structural sawn timber volume. 相似文献3.
Variations of wood basic density with tree age and social classes in the axial direction within Pinus massoniana stems in Southern China 总被引：1，自引：0，他引：1
Xiangwen Deng Liyun Zhang Pifeng Lei Wenhua Xiang Wende Yan 《Annals of Forest Science》2014,71(4):505-516
Context
Reliable estimates of wood density (WD) within individual trees could maximize the value of Pinus massoniana for specific end-use.Aim
We examined and quantified the axial patterns of WD in trees with different social status in the stands.Methods
Wood disks were sampled at the bottom, breast height, and middle of each 1-m sections from 108 stems, harvesting from three social classes in subtropical forests. A mixed-effects model was designed to quantify axial variation.Results
The WD at different height was significantly different from the whole-stem WD (WWD) except the relative height of 0.1. An overall decrease of 133.8 kg m?3 in WD was found from stem base to top. WD was significantly influenced by relative heights, tree age, and social class. WD of each relative height in mature trees was significantly higher than that of younger trees. Tree social class can affect WD development in the axial direction at age classes 2 and 3. Combining the fixed plus random effects, the final model explained 91 % of the observed variation in WD.Conclusion
The WD development patterns in the axial direction vary considerably among tree age, diameter at breast height, and social class. To distinguish and supply timber for specific end-uses, we should use the axial variation in disk WD (DWD) instead of WWD directly. The accurate predictions of WD provided by the model could be used to optimally classify logs into different product classes and maximize economic benefits. We can use DWD at the relative height of 0.1 instead of WWD of a single tree. 相似文献4.
Javier Puntieri Javier Grosfeld Luis Tejera Víctor Mondino Leonardo Gallo 《Annals of Forest Science》2013,70(5):471-479
? Context
There is evidence that Nothofagus nervosa (= N. alpina) is suitable for timber production in temperate regions due to its wood quality and fast growth. However, high intra-specific variability in the architectural traits of this species limits its usefulness.? Aims
This study was aimed at evaluating intra-specific variability in the architecture of N. nervosa trees at the population level, with emphasis on traits related to the suitability of trees for timber production.? Methods
The size of 13-year-old trees installed in an experimental field population and the extent of differentiation between trunk and branches were compared among families (trees derived from different mother trees).? Results
The large majority of trees exhibited architectural features indicative of high suitability for timber production: clear differentiation between trunk and main branches and few occurrences of permanent trunk forks, apex deaths, and sylleptic branching. Trees belonging to different families differed in height and trunk diameter. Micro-environmental conditions had a very significant effect on most architectural traits, including the trunk differentiation.? Conclusions
N. nervosa emerges as a suitable option for timber production in temperate regions. Trunk growth seems to be under both environmental and genetic control in this species. 相似文献5.
6.
David P. Blackburn Matthew G. Hamilton Chris E. Harwood Thomas G. Baker Brad M. Potts 《Annals of Forest Science》2013,70(5):461-470
Context
Stem straightness is an important trait for growers and processors of Eucalyptus globulus logs for solid-wood products.Aims
The aims of the study were to determine the extent of genetic variation in stem deviation from straightness in E. globulus and assess the utility of a six-point subjective scoring method as a selection criterion for stem straightness.Methods
Two E. globulus progeny trials, grown under solid-wood product regimes, were studied. At age 9 years (post-thinning), stem straightness was measured using both image analysis and a six-point subjective scale. Diameter at breast height (DBH; 1.3 m) was measured at both age 5 (pre-thinning) and age 9 years.Results
Significant additive genetic variation was observed. Strong, positive and significant additive genetic correlations were observed between the stem straightness assessment methods and between DBH at ages 5 and 9 years. Significant positive genetic correlations were shown between subjectively scored stem straightness and DBH at both ages 5 and 9 years.Conclusion
The six-point subjective scoring method is a cost-effective selection criterion for stem straightness in E. globulus. The image measurement technique may be applied where objective estimates of stem straightness are required, for training purposes and to verify subjective scores. 相似文献7.
Miloš Ivković Washington Gapare Harry Wu Sergio Espinoza Philippe Rozenberg 《Annals of Forest Science》2013,70(5):525-534
? Context
The correlation between tree ring width and density and short-term climate fluctuations may be a useful tool for predicting response of wood formation process to long-term climate change.? Aims
This study examined these correlations for different radiata pine genotypes and aimed at detecting potential genotype by climate interactions.? Methods
Four data sets comprising ring width and density of half- and full-sib radiata pine families were used. Correlations with climate variables were examined, after the extraction of the effect of cambial age.? Results
Cambial age explained the highest proportion of the ring to ring variation in all variables. Calendar year and year by family interaction explained a smaller but significant proportion of the variation. Rainfall had a positive correlation with ring width and, depending on test site, either a negative or positive correlation with ring density. Correlations between temperature during growing season and ring density were generally negative.? Conclusion
Climate variables that influence ring width and wood density can be identified from ring profiles, after removing the cambial age effect. Families can be selected that consistently show desirable response to climate features expected to become prevalent as a result of climate change. 相似文献8.
??Context
In the construction sector, wood is facing competition with other materials such as concrete, steel or plastics. Therefore, there is a need for more efficiency in the forest–wood chain by improving silvicutural management and wood processing technologies.??Aims
The objective of the study is to analyse the influence of log diameter and quality to recovery rate, veneer quality and economic benefit.??Methods
The trees used in the study came from a 30-year-old Pinus taeda L. thinning trial in Southern Brazil. In total, 57 logs (20.7 to 67.0 cm) were peeled following the standard industrial processing methods of the plywood mill.??Results
Average recovery rate was 54 % ranging from 35 to 72.6 %, with a linear trend (R 2?=?0.48) of increasing recovery with an increment on the log small-end diameter. Results show that the gap between theoretically possible and real recovery was lower in the logs with bigger diameters, indicating their higher efficiency in industrial processing. Moreover, the economic analysis detected that the current prices for log assortments reflect only the industrial potential of low-quality pruned logs. An optimised pruning strategy would result in higher industrial efficiency, which would allow higher log prices.??Conclusion
The results indicate that the recovery rate of bigger logs is higher in terms of volume of peeled veneer. The quality and therefore the value obtained from each log were negatively influenced by inadequate pruning strategies. Management of pines for higher value utilisation requires optimized thinning and pruning strategies in order to meet high growth rates and proportionally bigger dimensions of clear wood. 相似文献9.
? Context
A clear understanding of the genetic control of wood properties is a prerequisite for breeding for higher wood quality in Populus tomentosa Carr. hybrid clones.? Aims
The experiments aimed at unraveling genetic and environmental effects on wood properties among triploid hybrid clones of P. tomentosa.? Methods
We used 5-year-old clonal trials established in Northern China to assess the heritability of wood density and fiber traits. Two hundred seventy trees from nine clones were sampled in five sites.? Results
Site had a very significant effect on all recorded traits. Despite this large site effect, a tight genetic control was detected and clonal repeatability varied between 0.53 and 0.95. Significant genotype?×?environment interactions were detected for most of the traits. Moderate to tight correlation were evidenced among traits but they were not consistent with that in several cases that were site-dependent.? Conclusions
Our results revealed a tight genetic control over several wood properties and therefore breeding programs might be able to improve wood density, fiber length, and coarseness in these hybrids. 相似文献10.
Christopher D. Morhart Gerry C. Douglas Christian Dupraz Anil R. Graves Michael Nahm Pierluigi Paris Udo H. Sauter Jonathan Sheppard Heinrich Spiecker 《Annals of Forest Science》2014,71(5):527-542
Context
Current production from natural forests will not satisfy future world demand for timber and fuel wood, and new land management options are required.Aims
We explore an innovative production system that combines the production of short rotation coppice in wide alleys with the production of high-value trees on narrow strips of land; it is an alternative form of alley cropping which we propose to call ‘alley coppice’. The aim is to describe this alley coppice system and to illustrate its potential for producing two diverse products, namely high-value timber and energy wood on the same land unit.Methods
Based on a comprehensive literature review, we compare the advantages and disadvantages of the alley coppice system and contrast the features with well-known existing or past systems of biomass and wood production.Results
We describe and discuss the basic aspects of alley coppice, its design and dynamics, the processes of competition and facilitation, issues of ecology, and areas that are open for future research.Conclusion
Based on existing knowledge, a solid foundation for the implementation of alley coppice on suitable land is presented, and the high potential of this system could be shown. 相似文献11.
Carmen Sotelo Montes John C. Weber Dimas A. Silva Clarice Andrade Graciela I. B. Mu?iz Rosilei A. Garcia Antoine Kalinganire 《Annals of Forest Science》2012,69(6):747-756
? Context
There is little information about inter- and intra-specific variation in fuelwood properties of trees/shrubs in West Africa.? Aims
We studied variation in fuelwood properties of Balanites aegyptiaca, Combretum glutinosum, Guiera senegalensis, Piliostigma reticulatum, and Zizyphus mauritiana in the Sahelian and Sudanian ecozones of Mali.? Methods
Trees were sampled on different soil (sandy, sandy/loam, or rocky), land use (parkland agroforest or woodland), and terrain (flat, temporarily flooded, or hill slope) types in five regions extending from the drier eastern to the more humid western parts of Mali. Basic density, volatile matter, fixed carbon, ash content, moisture content, gross calorific value, and fuel value index were measured for each tree and adjusted for tree age.? Results
All fuelwood properties differed significantly among species, but there were significant species by region interactions. Most fuelwood properties of four species differed significantly among regions. Soil and/or land use type had significant effects on a few fuelwood properties of four species.? Conclusion
In general, fuelwood production is recommended in all regions for G. senegalensis, in drier regions for B. aegyptiaca and C. glutinosum, in more humid regions for Z. mauritiana, and on rocky soils for all species. Fuelwood production of P. reticulatum is not recommended. 相似文献12.
Axel Albrecht Ulrich Kohnle Marc Hanewinkel Jürgen Bauhus 《Annals of Forest Science》2013,70(2):195-207
Context
Since storm damage has a large impact on forest management in Central Europe, we investigated the main storm risk factors for two important conifer species, Douglas-fir (Pseudotsuga menziesii [Mirbel] Franco) and Norway spruce (Picea abies [L.] Karst.).Aims
We compared general storm damage levels of Douglas-fir and Norway spruce, the latter being known to have high storm risk among European tree species.Methods
Generalized linear mixed models and boosted regression trees were applied to recorded storm damage of individual trees from long-term experimental plots in southwest Germany. This included two major winter storm events in 1990 and 1999. Over 40 candidate predictors were tested for their explanatory power for storm damage and summarized into predictor categories for further interpretation.Results
The two most important categories associated with storm damage were timber removals and topographic or site information, explaining between 18 and 54 % of storm damage risk, respectively. Remarkably, general damage levels were not different between Douglas-fir and Norway spruce.Conclusion
Under current forest management approaches, Douglas-fir may be considered a species with high storm risk in Central Europe, comparable to that of Norway spruce. 相似文献13.
? Context
The knowledge of how shrub–seedling interactions vary with summer drought, canopy opening, and tree species is crucial for adapting forest management to climate change.? Aims
The aim of this study was to assess variation in shrub–oak recruitment associations along a south–north drought climate gradient and between two levels of canopy cover in coastal dune forest communities in a climate change-adapted forest management perspective.? Material and methods
Mapped data of associational patterns of seedlings of three oak species with interspecific pooled shrubs were analyzed using a bivariate pair correlation function in 10 (0.315 ha) regeneration plots located in forest and recent gap sites along the climate gradient. An index of association strength was calculated in each plot and plotted against a summer moisture index.? Results
The association strength increased with increasing summer drought from wet south to dry north and from closed forests to gaps.? Conclusion
Consistent with facilitation theory, our results suggest that climate change may shift associational patterns in coastal dune forest communities towards more positive associations, in particular in canopy gaps. In a perspective of climate change, foresters may need to conserve understory shrubs in gaps in order to promote oak species regeneration. 相似文献14.
Giulia Attocchi 《Annals of Forest Science》2013,70(7):663-673
Context
Avoidance or control of epicormic shoots is among the major silvicultural challenges for the production of high-quality oak timber. In northern Europe, contemporary oak silviculture aims to produce valuable timber on a relatively short rotation, applying early, heavy thinning combined with artificial pruning.Aims
The aim of this study was to analyse the effects of pruning and stand density on the production of new epicormic shoots on young trees of pedunculate oak (Quercus robur L.).Methods
The study was based on two field experiments in even-aged stands of pedunculate oak subjected to different thinning practices and early selection of potential future crop trees. From ages 13 to 15 years, stem density was reduced to 300 trees ha?1, 1,000 ha?1 or stands remained unthinned. Pruning was conducted on selected trees at ages 22–24 years. At that age, the stem density in unthinned control plots ranged from 2,500 to 3,100 ha?1. All treatments were replicated twice within each experiment.Results
Pruning led to an overall increase in the total production of new epicormic shoots. More epicormic shoots were produced in the lower part of the stem (0–3 m in height) than in the upper part (3–6 m). The number of new epicormic shoots increased with increasing stand density.Conclusion
Early, heavy thinning combined with high pruning at regular intervals may help shorten the rotation length for pedunculate oak without further reduction in wood quality than that which is caused by wider annual growth rings. 相似文献15.
Tahiana Ramananantoandro Miora F. Ramanakoto Andraina H. Rajemison Florent Eyma 《Annals of Forest Science》2013,70(6):649-658
Context
The knowledge of consumer preferences in wood furniture is crucial for the wood processing industries.Aim
This study aims to identify the attributes of wood that affect the preferences of consumers from the city of Antananarivo, Madagascar, for wooden furnishings.Methods
Quantitative measurements of the density and aesthetic properties of 12 wood species were carried out. The properties measured were the colour in the CIEL*a*b* colour space, the texture through greyscale image processing, and the density. Then, the wood specimens were subjected to sensory analysis with 100 consumers.Results
The results showed that the "density" was a prime criterion in choosing a wood species. Concerning the visual aspect, Antananarivo consumers generally liked slightly dark wood colour (L* around 52), tending towards yellow, with a visible oriented texture. The influence of socio-economic factors was also highlighted.Conclusion
These results are of prime importance in the search for alternative species to replace precious woods that are becoming rare. 相似文献16.
Andreas Rais Enrico Ursella Enrico Vicario Federico Giudiceandrea 《Annals of Forest Science》2017,74(2):28
Key message
Industrial computed tomography scanning of logs provides detailed information on timber quality prior to sawing. A sawing simulation—considering log rotation angle and knot size accuracy—revealed an average value increase of up to 20% for the best angle compared to the conventional horns-up position.Context
Computed tomography (CT) scanning has the potential to improve the value of products sawn from logs and meets the increasing demands of the wood industry for detailed information on log quality prior to processing.Aims
In a validation step, automated measurements of knot cluster variable DAB (DIN 4074-1:2012-06) using CT were compared with manual measurements. In a second optimization step, the hypothesis that the value of the sawn products is increased by sawing at the best rotation angle as opposed to the horns-up position was tested.Methods
A sample of 36 Douglas-fir logs were scanned in an industrial CT scanner, and sawn into boards. Knots on the boards were manually measured, and compared with the corresponding knots on virtual boards created from the CT data. The error of the DAB was measured by comparing CT data to manual measurements. An optimized sawing simulation was performed, using the measured DAB error to account for CT measurement errors, as well as a rotational error to account for errors in the log turning equipment. Using the results of the sawing simulation, Monte Carlo simulations were performed to show the potential and benefit of an industrial CT scanner.Results
The three largest DABs measured by the CT showed good correlation to the measurements on the manual boards. The simulation revealed an average increase of value from 4 to 20% compared to the conventional horns-up position depending on the relative price differences between the strength grades.Conclusion
By using a CT scanner to optimize sawing, sawmill owners can process logs in a better way to produce final products with increased added value.17.
Context
Pinus pinaster Ait. is found in the Iberian Peninsula under Mediterranean and Atlantic conditions. Both climates encounter each other in Galicia (NW Spain), where two bioclimatic regions can be differentiated: coastal and inland. A breeding program was launched in the coastal area, with two breeding and deployment areas delimited.Aims
We analyse plasticity patterns across regions in a coastal breeding population to assess the suitability of current breeding areas and how genetic material will likely respond to future climate.Methods
Total height at ages 3 and 8?years was assessed in 16 trials established along the coast and in inner Galicia. Clustering of environments with similar genotypic performance, family sensitivities to climatic factors and stability analyses were performed.Results
Sizeable genetic variation in plasticity was found among families, and crossover genotype-by-environment interactions were detected within and between regions. It was unfeasible to regionalize Galicia into alternative areas of stable genotypic performance. Only the cold regime was found to noticeably underlie the array of phenotypic responses to changing environmental conditions.Conclusions
Results suggest that previous delimitation in two breeding areas is pointless and indicate reduced effects of a changing climate towards Mediterranean conditions on decreasing population fitness. 相似文献18.
? Context
Models for predictions of soil compaction following forest traffic represent important decision tools for forest managers in order to choose the best management practices for preserving soil physical quality. In agricultural soil compaction research, analytical models are widely used for this purpose.? Aims
Our objective was to assess the ability of an analytical model to predict forest soil compaction under forwarder traffic.? Methods
We used the results from two experimental sites set up in north-eastern France in 2007 and 2008 to compare simulations using the SoilFlex model with observed bulk density following forwarder traffic.? Results
The best model-based predictions were found when considering the mean initial soil conditions and an increased rebound parameter in the upper soil layers (0–10 cm) in comparison to the deeper layers (10–50 cm). The need to increase the rebound parameter in the soil surface layer to improve model accuracy was attributed to a large soil organic matter content in the uppermost layers of forest soils. For the site where initial soil mechanical parameters were measured as a function of soil bulk density and water content, the model performance was good, with a root mean square error (RMSE) of 0.06. The model performed poorer (RMSE of 0.11), especially for the surface soil layer, for the second site that was wetter at the time of traffic and where soil mechanical properties were not measured but estimated by means of pedo-transfer functions.? Conclusions
SoilFlex was found to yield satisfactory predictions and could help forest managers estimate the risk of compaction and to select the most appropriate machinery for given soil conditions in order to preserve the soil from physical degradation during traffic in forest ecosystems. However, our results emphasise the need for research on soil mechanical properties of forest soils, in particular on the role of soil organic matter and roots on soil compressive properties. 相似文献19.
Iciar Alberdi Isabel Cañellas Laura Hernández Sonia Condés 《Annals of Forest Science》2013,70(3):277-285
Context
Old-growth trees play a very important role in the maintenance of biodiversity in forests. However, no clear definition is yet available to help identify them since tree age is usually not recorded in National Forest Inventories.Aims
To develop and test a new method to identify old-growth trees using a species-specific threshold for tree diameter in National Forest Inventories.Methods
Different nonlinear mixed models for diameter–age were generated using data from the Spanish Forest Inventory in order to identify the most appropriate one for Aleppo pine in its South-western distribution area. The asymptote of the optimal model indicates the threshold diameter for defining an old-growth tree. Additionally, five site index curves were examined to analyze the influence of site quality on these models.Results
The Hossfled III mixed model was found to be the most appropriate to fit diameter–age curves for Aleppo pine trees. The overall diameter at breast height threshold for old-growth trees was 40.6 cm, although over a range of sites with increasing site quality, the threshold figure was 36.0, 38.0, 40.4, 43.1, and 46.3 cm, respectively.Conclusions
This method allows the identification of old-growth trees and therefore of biodiversity hotspots, thus providing decision makers with a useful tool for management purposes. 相似文献20.
Andreas Rais Werner Poschenrieder Hans Pretzsch Jan-Willem G. van de Kuilen 《Annals of Forest Science》2014,71(5):617-626