首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 125 毫秒
1.
Vegetable oils provide boron retention of about 30% of initial amount depending on oil drying properties. Linseed oil is the most efficient, followed by soybean oil and rapeseed oil. Durability of C. japonica and F. crenata wood specimens has been enhanced by application of linseed oil alone but not enough to reduce termite’s attack of Coptotermes formosanus. Treating wood with a 1.0% w/w boric acid solution prior to oil treatment protects C. japonica from termite and fungi degradations. Efficiency against termites is mainly due to boron retention by oil but hydrophobic oil also forms a barrier decreasing fungi penetration. Boron efficacy threshold around 0.7 kg/m3BAE, lower than classical boron treatments thresholds indicates that oil water-repellence reinforces boron biostatic effect.  相似文献   

2.
Leachability,decay, and termite resistance of wood treated with metaborates   总被引：1，自引：0，他引：1  
The formation of insoluble metaborates in wood was investigated by impregnating the wood with borax and metallic salts, after which their properties (e.g., leachability in running water and biological resistance) were evaluated. The solubility of three metaborates in acidic solutions was also evaluated. Double-diffusion treatment was carried out to form the precipitates of metaborates in sapwood specimens of Japanese cedar (Cryptomeria japonica) at room temperature. Water-saturated wood specimens were first impregnated by a saturated borax solution and then diffuse-penetrated with Zn2+, Ca2+, or Pb2+ solution. The precipitates of the three metaborates in the wood proved to be insoluble or hardly soluble in water by the leaching test. With the decay test using a brown-rot fungus (Fomitopsis palustris) and a white-rot fungus (Trametes versicolor) and with the termite test using a virulent subterranean termite (Coptotermes formosanus), the metaborate-treated woods showed generally good decay and termite resistance with negligible mass loss of the specimens. Particularly, the lead metaborate formed in the wood provided superb biological resistance against decay and termite attacks. In addition, the precipitates of these metaborates were found to be soluble in acidic solution, suggesting a way to remove these chemicals from wood when disposing of waste materials.  相似文献   

3.
Summary We are investigating wood decay biocides that are both effective in protecting wood from decay and more environmentally compatible than other biocides. A series of halophenyl sulfonamides were synthesized and characterized by infrared and neuclear magnetic resonance spectroscopy. Wood impregnated with these compounds was tested for resistance to decay as well as water leaching. Wood impregnated with para-iodophenyl or para-fluorophenyl para-tolyl sulfonamides resisted decay by brown- and white-rot fungi. For wood impregnated with para-iodophenyl para-tolyl sulfonamide, threshold retention with the brown-rot fungus Gloeophyllum trabeum was 9.1 mmol/ 100 g solution for unleached blocks. For leached blocks, weight loss was very high (24.6%), which indicated that threshold retention will be substantially higher than 9.1 mmol/100 g solution. With the white-rot fungus Coriolus versicolor, threshold retentions were 2.9 and 5.6 mmol/100 g solution, respectively, for unleached and leached blocks. Leaching of the blocks treated with the iodo compound slightly decreased resistance to decay by C. versicolor. For wood impregnated with parafluorophenyl para-tolyl sulfonamide, threshold retentions with both G. trabeum and C. versicolor were very close to 9.0 and 9.2 mmol/100 g solution, respectively, for leached and unleached blocks. Leaching had a little effect on resistance to decay by both fungi. Wood impregnated with parachlorophenyl or bromophenyl para-tolyl sulfonamide was ineffective in resisting decay by both fungi.  相似文献   

4.
We examined the ability of chemically modified tannin and tannin-copper complexes to penetrate wood and the ability of the treated wood to resist termites. Only the tannin-treated wood retained the agents after treatment. Wood with untreated mimosa tannin (MT) retained the least amount, followed by wood with resorcinolated tannin (RMT) and that with catecholated tannin (CMT). When RMT or CMT was mixed with ammonia-copper, the wood retained twice as much of these solutions as the MT -ammonia-copper solution. The degree of retention of RMT-NH3-Cu and CMT-NH3-Cu ranged from 268 to 326kg/m3. The solutions penetrated 2–13 mm from the tangential sections of the logs. We also measured the termite resistance conferred by these solutions. Most of the tannin-NH3-Cu solutions showed contact lethality for termites in the contact toxicity test. However, the termites were fed cellulose treated with those solutions and most survived the oral toxicity test (14 days). Moreover, these solutions reduced the amount of damage to the wood by termites. However, the mortality rate of the termites during the eating-damage test (>21 days) did not reach 100% for any of the solutions except for RMT. As a result of the field stake test with the same log's used for the penetrability test, the mass loss of wood treated with RMT or CMT alone or with RMT + NH3 + CuCl2, was about one-third to one-half that of the controls. Because these solutions have good wood penetrability and good termite resistance, they have potential use as low-toxicity wood preservatives.  相似文献   

5.
The treatability of wood (sapwood ofCryptomeria japonica D. Don) and wood-based composites (particleboard, waferboard, medium-density fiberboard, plywood) with vapor-boron was good, and the treated materials proved to be resistant to decay fungi and subterranean termites in laboratory bioassays. No difference in effectiveness was noted between vapor-boron and liquid-boron treatment of wood. Toxic threshold values determined for solid wood were 0%–0.24%, 0.26%–0.51%, and 0.26%–0.51% BAE (boric acid equivalent), respectively, against the white-rot fungusTrametes versicolor (L.: Fr.) Pilat, the brown-rot fungusFomitopsis palustris (Berk. et Curt.), and the subterranean termiteCoptotermes formosanus Shiraki. A concentration of less than 1% BAE seemed sufficient to control biological attacks on composites, although the toxic limits could not be determined more accurately because of the tested range of boron retention. High boron retention was needed to meet the performance requirements for slow-burning materials when a fire-retardant agent was not incorporated into the glue line.  相似文献   

6.
A laboratory no-choice termite bioassay was conducted to evaluate the ability of copper HDO (CX-A or copper xyligen) to protect radiata pine (Pinus radiata D. Don) wood samples from attack by two subterranean termite species, Reticulitermes speratus and Coptotermes formosanus. A series of sapwood samples were pressure treated with either 0.25%, 0.50%, 0.75%, or 1.00% copper HDO solution. Samples treated with equivalent concentrations of a benchmark preservative, CCA-C, were used as treated controls. All samples (including controls) were subjected to an artificial weathering schedule before the bioassay. The samples were exposed to 30-day R. speratus tests and 3-week C. formosanus tests. Copper HDO was shown to deter termites from significant feeding on the treated wood. At a retention of 5.8 kg/m3 (treated with 0.75% solution) or higher, the mass loss from termite feeding did not exceed 3% for both the 30-day R. speratus tests and the 3-week C. formosanus tests. At each of the retentions tested, copper HDO performed comparably with equivalent retentions of CCA-C; however, field data are needed to validate these laboratory results. The preliminary findings are that copper HDO pressure treatment has potential as a viable method of protecting wood from attack by both termite species tested.  相似文献   

7.
Studies on the wood preserving techniques against subterranean termites have been undertaken with a view to promote the use of inorganic indigenous pesticides in our country. The thin films of gelatine solution (glue of animal hides) containing 10% calcium carbonate or 5% copper sulphate as well as sodium silicate solution containing 12% calcium carbonate +10% zinc oxide coated separately on wooden stakes prevented termite attack in soil up to 2, 4 and 5 years, respectively. Whereas control wooden stakes were found to be severely damaged by termites within 6 months. Stakes coated with Solignum®-white used as standard wood preservative for comparison remained free from termite infestation for a period of 5 years.  相似文献   

8.
In this study, the use of polyvinyl alcohol (PVA) as boron fixative agent was investigated. Two levels of PVA (2.5 and 4%) were evaluated with disodium octaborate tetrahydrate (DOT) at three concentrations (1, 2 and 4% boric acid equivalent (BAE)) using a double vacuum impregnation process on Scots pine sapwood specimens. Leaching was performed according to a laboratory leaching procedure. Boron analysis using atomic absorption spectrometer showed a significant reduction in boron leachability for the samples treated with both concentrations of PVA when compared to the stand-alone boron treatment leading to boron retentions capable of preventing wood biological degradations. Decay resistance of the leached specimens was evaluated using the brown rot fungus Poria placenta. Even if complete protection was not fully achieved, an improvement in decay resistance was observed for the samples treated with DOT in presence of PVA. This leak of efficacy was attributed to a decrease in the biological activity of the complexed boron against fungi. Durability of treated wood against termite attack, evaluated using Reticulitermes santonensis, indicated a significant enhancement for the samples treated in presence of the fixative agent compared to the pure boron treatment.  相似文献   

9.
The field of wood protection is currently changing due to the restrictions imposed by the Biocidal Products Regulation. The need for development of new wood protection technologies is therefore growing. In this work, the resistance of European beech (Fagus sylvatica L.) wood impregnated with nano-dispersions of zinc oxide (nano-ZnO) and zinc borate (nano-ZnB) against the termite Reticulitermes grassei Clement was investigated. Three different concentrations (0.5%, 1%, 2%) of the nanocompounds were tested. The effects of water leaching were also investigated. A severe effect in terms of termite workers mortality was induced by both dispersions, even at the lowest concentration. In terms of termite feeding, nano-ZnO dispersions appeared to be more efficient than nano-ZnB as they induced significant improvement at concentrations as low as 0.5%. Nano-ZnB was applied at 1% or higher concentrations in order to impart similar changes. Nano-ZnB dispersions were efficient in terms of termite resistance for a concentration at least 1%. Further increasing concentration to 2% resulted in a respective increase of wood efficacy against termites. For both tested nanocompounds, water leaching did not result in any significant increase of termite feeding.  相似文献   

10.
The distributions of boron in Japanese cedar (Cryptomeria japonica D. Don) sapwood blocks treated with aqueous or methanolic boric acid [B(OH)3] solutions were explored through Raman spectroscopy and prompt gamma-ray analysis (PGA). B(OH)3 was the sole boron species observed in Raman spectra of the wood blocks treated with either solution. Plots of weight gain of the treated wood blocks versus boron concentration in treatment solutions were found to be linear. The results indicated that the methanolic solution makes it possible to impregnate wood with much larger amounts of boron than the aqueous solution. PGA confirmed that B(OH)3 was highly enriched near the end grains of the treated wood blocks. Raman measurements suggested that boron content in the bulk of the wood block is not as large as expected from the weight gain of the treated wood blocks when an ordinary air-drying method is used. It was concluded that the aqueous solution impregnates the cell walls of wood with boron more easily than the methanolic solution. Part of this report was presented at the 55th (Kyoto, March 2005) and 56th (Akita, August 2006) Annual Meetings of the Japan Wood Research Society. This article follows the previous rapid communication “Analysis of boron in wood treated with boric acid solutions using Doppler broadening method of prompt gamma-rays.” J Wood Sci (2006) 52:279–281  相似文献   

11.
Furfuryl alcohol has a sufficiently small molecular size, which allows impregnation into wood and can be polymerized in the cell walls. Polymerization can be accomplished using a catalyst, heat or penetrating radiation. This research illustrates a natural wood polymer composite (NWPC) that was obtained under the catalytic effect of borates. Furfuryl alcohol (FA) and borates were mixed at different ratios before treatment. When borates alone are used, they were totally leached from wood after cyclic leaching periods. However, this was not encountered with the mixture of furfuryl alcohol and borates. Furfuryl alcohol considerably improved antiswelling efficiency by about 85% for both Japanese cedar ( Cryptomeria japonica) and Scots pine ( Pinus sylvestris L.) wood specimens. Results of the leaching tests of borate indicated that boric acid readily lost its boron content in the early cycles of the leaching periods and the highest leaching rate of boron was observed at the first leaching cycle (512 ppm). When furfuryl alcohol mixed with borates, boron was released to the leaching water at slower amounts, suggesting the possibility of longer protection of treated wood in service.  相似文献   

12.
Summary Particle boards are of increasing economic importance. Without special treatment they are destroyed by termites. Deterioration of unprotected material as well as possibilities and present knowledge of preservation against termite attack are briefly described. Recent laboratory experiments with particle board treated to make it resistant to humidity and basidiomycete fungi showed that only one organic preservative out of four protected the boards also against termite attack; one of two water-soluble preservatives gave promising results. Heterotermes indicola (Wasmann) from India proved to be more aggressive and resistant to the preservatives than Coptotermes amanii (Sjöstedt) from Kenya and Nasutitermes nigriceps (Haldemann) from Guatemala. Kalotermes flavicollis (Fabr.) from Italy was also very tolerant to the fungicidal preservatives. Further development of treatments of particle board against termites is required.Part of this paper was prepared for the World Consultation on the Use of Wood in Housing, Vancouver, B. C., Canada, July 5–16, 1971.  相似文献   

13.
A laboratory bioassay was conducted on the ability of didecyldimethylammonium chloride (DDAC) to protectPinus radiata D. Don wood specimens from attack by two of Australia's most economically important species of subterranean termite,Mastotermes darwiniensis Froggatt (Mastotermitidae) andCoptotermes acinaciformis (Froggatt) (Rhinotermitidae). Sapwood specimens ofP. radiata, treated to achieve nominal retentions of 0.5, 1.0, 2.0, 4.0 and 6.0 kg/m3 of active ingredient, were bioassayed against each of these termite species for four and eight weeks, respectively. Mean percentage mass loss data showed that between 2.0 and 4.0 kg/m3 of DDAC was necessary to protect specimens from significant attack by both species of termite. The usefulness of DDAC as a termiticide for timber, particularly in the above-ground situation, is discussed.With one table and one figure  相似文献   

14.
Four field trials were conducted with wood modified with dimethyloldihydroxy-ethyleneurea (DMDHEU) in contact with subterranean termites. Trials 1 to 3 were conducted with Coptotermes acinaciformis (Froggatt); 1 and 2 in south-east Queensland, and 3 in northern Queensland, Australia. Trial 4 was conducted in northern Queensland with Mastotermes darwiniensis (Froggatt). Four timber species (Scots pine, beech, Slash pine and Spotted gum) and two levels (1.3 M and 2.3 M) of DMDHEU were used. The tests were validated. DMDHEU successfully prevented damage by C. acinaciformis in south-east Queensland, but not in northern Queensland. It also did not protect the wood against M. darwiniensis. Except for beech in trial 4, DMDHEU led to reduced mass losses caused by termite attack compared to the unmodified feeder stakes. Slash pine (in trials 1 and 3) and Spotted gum (in trial 1) presented low mass losses. Modification of Scots pine was more effective against termite damage than the modification of beech.  相似文献   

15.
Any means helpful for the promotion of termite feeding activity has potential for use in a matrix in termite bait application. Therefore, energy transfer by gamma irradiation is worthy of consideration for converting wood into termite-accessible material. Wood specimens gamma-irradiated at 100 kGy and at lower levels were tested for their degrees of polymerization (DP) of cellulose and biological resistance. The DP of cellulose adversely decreased with increased doses of gamma irradiation. Termite wood consumption rates, which were determined by laboratory tests using undifferentiated larvae (workers) of Coptotermes formosanus Shiraki, were significantly higher at 100 kGy than at other doses. On the other hand, the decay resistance of gamma-irradiated wood against the fungi Fomitopsis palustris (Berkeley et Curtis) Murrill and Trametes versicolor (L. ex Fr.) Quel did not vary by irradiation dose.  相似文献   

16.
Silicic acid: boric acid complexes as wood preservatives   总被引：1，自引：0，他引：1  
Wood was treated with a low molecular-weight silicic acid: boric acid agent and examined for increased resistance to termites and combustion. Wood treated with silicic acid only exhibited increased termite resistance, but not to the marked extent observed after treatment with a mixture of silicic and boric acids. Increasing the quantity of boric acid also increased the termite mortality rate and shortened the time to death. Oral-toxicity tests using dyed silicic acid: boric acid suggested that the boric acid in the agent acted as a stomach poison. Field tests on stakes over three years showed that even if stakes were placed near the termite exit, those treated with silicic acid and high levels of boric acid had no attack by termites and maintained their original form. Though these specimens were installed in the field during three rainy seasons (about six months in total) in three years, the termite resistance ability of these chemicals was maintained. It became clear that this silicic acid: boric acid agent has a high water resistance ability worthy of application in the outdoors. Combustion tests showed that flame and glowing combustion times were shortened at high levels of boric acid. When a boric acid: methanol solution was added at of rate of not less than 25 ml for 100 g of colloidal silicic acid solution (CSAS), flaming and glowing combustion were not observed. Although the charring length of the wood specimen which was treated with a low molecular weight silicic acid: boric acid agent decreased to 2/3 of that of the control wood, the charring lengths were not influenced by the level of boric acid. However, the volume of smoke decreased relative to the amount of boric acid that had been added.  相似文献   

17.
We have observed acid fog in Mt. Oyama adjacent to the Kanto Plains in Japan, where acid fog under pH 3 has been frequently observed and natural fir forest (Abies firma) has been declining. We applied the simulated acid fog to the needles of fir twigs and the treatment removed calcium, boron, and cell-wall acidic sugars from the needles. We also observed high contents of calcium, boron, and acidic sugars in throughfall collected under the declining forest canopy. Ca++ and Mg++ ion leach via ion-exchange with major cations of fog-water and the amount of leached boron increased with the increase in the concentration of leached Ca++. The deficiency of calcium and boron by leaching could be one of the main causes of decline of the fir forest.  相似文献   

18.
The termite Nasutitermes corniger is attracted to weathered wood, but it is not known whether this attraction is of chemical or physical nature. This work examines whether wood extracts can change the attraction of N. corniger to a food substrate. In a first experiment, filter paper impregnated with a eucalyptus extract, Eucalyptus grandis, and another one with a solvent were placed in the foraging arena of N. corniger nests under laboratory conditions. The extracts used were from weathered or unweathered wood. During the second experiment, two tests were performed using eucalyptus wood. First, a piece of unweathered wood was impregnated with an extract of weathered wood (treatment) or solvent (control). In the second test, a piece of weathered wood was impregnated with an extract of unweathered wood (treatment) and another one with solvent (control). At the end of the tests, the number of termite recruitment on each substrate was quantified. Filter paper recruited more termites when treated with unweathered wood extracts or with extracts of weathered wood than when impregnated with the solvent. Unweathered wood treated with extracts of weathered wood recruited more termites than the control. However, weathered wood impregnated with extracts of unweathered wood recruited similar numbers of termites as the same wood impregnated with the solvent. It was verified that chemicals from weathered or unweathered wood increased the foraging activity of N. corniger in neutral substrates, but only chemicals from weathered wood altered the attraction of N. corniger to eucalyptus wood.  相似文献   

19.
Wood treated with CCB (chromated copper borate) has an expected service life of 20–50 years, depending on conditions of service and method of treatment. After this period, treated wood is discarded as special waste. Due to toxic elements (Cu, Cr, and B) in such treated wood, burning and landfill disposal are not considered as environmentally sound solutions. Chemical extraction seems more promising. The principle of the method is to convert fixed biocides in wood into soluble form and leach them out of the wood. In order to elucidate this process, copper(II) sulfate, potassium dichromate, and CCB-treated samples were leached using five different agents, namely, water, an aqueous solution of oxalic or acetic acid, and an aqueous solution of oxalic or acetic acid with ammonia. Afterwards, the amounts of leached copper and chromium were determined. In a parallel experiment, electron paramagnetic resonance measurements of wet- and dry-leached and unleached samples were performed in order to determine the paramagnetic complexes that were formed. The highest chromium leaching was achieved with the aqueous solution of oxalic acid, as chromium was converted into water-soluble chromium oxalate. While the mixture of oxalic acid and ammonia resulted in the highest copper leaching, EPR observation revealed that in this case water-soluble complexes of copper, oxalic acid, and ammonia were formed. We found out that oxalates formation is not the only mechanism responsible for copper or chromium leaching. High acidity may play an important role too.  相似文献   

20.
  • ? Wood used in outdoor conditions out of ground contact is susceptible to weathering, inducing both fungal decay and leaching of components to the environment.
  • ? This paper presents a methodology to determine these two parameters for untreated, preservative-treated and modified wood. Therefore, the wood was first leached and subsequently exposed to fungal decay of the most prominent wood-rotting fungi. The crustacean Daphnia magna was exposed to the leachates to provide information on their impact on the environment.
  • ? Combining both parameters reveals that preservative-treated wood and modified wood are capable of protecting the wood adequately for application under use class 3 conditions without posing a threat to the environment.
  • ? This proves the suitability of the concept of combining efficacy and ecotoxicology for the evaluation of new types of wood treatments.
    •   相似文献   

    设为首页 | 免责声明 | 关于勤云 | 加入收藏

    Copyright©北京勤云科技发展有限公司  京ICP备09084417号