首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Seventy‐one races of maize representing races from Latin America were analyzed for microstructural features such as the degree of compaction of the endosperm cell bodies, starch granule size and morphology, and hard‐soft endosperm relationship. Flours were analyzed using rapid visco analysis and differential scanning calorimetry. Compaction grade was the most important microstructural feature of the maize kernels that related to thermal and rheological properties. Highly compact kernels developed low peak and final viscosities; small, polygonal starch granules; and required more time and higher temperature to gelatinize. The opposite was the case for less compact kernels. This indicates that the characteristic protein matrix of highly compact kernels represents a physical barrier to water migration into the granules, retarding the gelatinization process.  相似文献   

2.
The relative amounts of amylose and amylopectin in maize starch were determined in samples representing hard and soft endosperm. Although differences were small, amylose content differed significantly (P < 0.001 and P < 0.05) between the two types of endosperm, with hard endosperm containing a higher percentage of amylose. Scanning electron microscopy was used to determine that the surface appearance of starch granules from hard and soft endosperm differed. Starch granules from soft endosperm had randomly distributed pores on their surfaces, which had a rough appearance. Few pores were observed on granules from hard endosperm. A fairly common occurrence with starch granules from soft endosperm was the development of wrinkles or fissures upon prolonged exposure to the beam of the electron microscope. Thus, a correlation existed between endosperm hardness, amylose content, and susceptibility to wrinkling and fissures. The granules of the soft endosperm of maize, presumably less mature than the granules of the hard endosperm, have a lower amylose content (20.5 ± 1.9% vs. 23.0 ± 1.0%), exhibit more surface pores, and are more susceptible to wrinkling in an electron beam, compared with granules of the hard endosperm. Results suggested that the composition and internal architecture of the starch granule differ depending on the hardness of the endosperm from which it was obtained.  相似文献   

3.
Starches were isolated from 12 soft wheat (Triticum aestivum L.) cultivars and were characterized for waxy (Wx) allelic expression, thermal pasting characteristics, and starch granule size. Gels were produced from the thermally degraded starches and were evaluated using large deformation rheological measurements. Data were compared with cultivar kernel texture, milling characteristics, starch chemical analyses, and flour pasting characteristics. Larger flour yields were produced from cultivars that had larger starch granules. Flour yield also was correlated with lower amylose content and greater starch content. Harder starch gels were correlated with higher levels of amylose content and softer kernel texture. The cultivar Fillmore, which had a partial waxy mutation at the B locus, produced the highest peak pasting viscosity and the lowest gel hardness. Softer textured wheats had greater lipid‐complexed amylose and starch phosphorus contents and had less total starch content. Among these wheats of the soft market class, softer textured wheats had larger starch granules and harder textured wheats had smaller starch granules. In part, this may explain why soft wheats vary in texture. The smaller granules have larger surface area available for noncovalent bonding with the endosperm protein matrix and they also may pack more efficiently, producing harder endosperm.  相似文献   

4.
Granule size distribution of wheat starch is an important characteristic that can influence its chemical composition, which in turn may affect its functionality. The granule size distribution and chemical composition of soft wheat starches were characterized and compared and relationships among those properties were identified. Thirty-four starch samples from 12 soft wheat cultivars grown in the eastern half of the United States were examined. Granule size distribution was characterized using a laser light-scattering technique. Amylose and phospholipid contents were determined using colorimetric procedures. A clear trimodal distribution of granule sizes was shown by 26 out of 34 starch samples: small granules with diameters <2.8 μm, midsize granules with diameters of 2.8–9.9 μm, and large granules with diameters >9.9 μm. Volume% distribution of granules within the three size classes had ranges of 9.7–15.2% (small), 13.4–27.9% (medium), and 57.9–76.9% (large). Highly significant differences were seen among the cultivars for volume% of granules within the ranges of 9.9–18.5 μm and 18.5–42.8 μm. Cultivar specific surface area means also differed. The environment affected granule size distribution, with some cultivars exhibiting more variation than others. Pioneer 2555 was the least variable, whereas Pioneer 2550 and Geneva were the most variable cultivars. Mean total amylose (TAM), apparent amylose (AAM), and lysophospholipid (LPL) values varied significantly among cultivars. TAM was positively correlated with the volume% of granules of 9.9–18.5 μm. LPL was negatively correlated with mean starch granule diameter and positively correlated with specific surface area of granules, indicating smaller granules tended to have higher lipid contents. Results suggest that significant differences exist in granule size distribution of soft wheat starches and affect starch chemical composition. Data also suggest it is possible that lipid is preferentially associated with the biosynthesis of small starch granules.  相似文献   

5.
One oat cultivar grown in Idaho (three field sites) was pin-milled and separated by sieving to investigate whether starch from oat bran differs from the remainder of kernel. Ground oat particles were classified into three sieve fractions: 300–850 μm, 150–300 μm and <150 μm). β-Glucan content in sieve fractions was analyzed and starch was extracted from kernels without milling and from kernels of each sieve fraction. β-Glucan contents of 300–850, 150–300, and <150 μm sieve fractions were 4.2, 2.3, and 0.8%, respectively. Therefore, starch in bran (300–850 μm sieve fraction) and endosperm (<150 μm sieve fraction) were separated. Starch isolated from entire kernels had significantly higher apparent and absolute amylose content than starch from the 300–850 μm sieve fraction. Starch from different sieve fractions was not significantly different in the apparent amylose, absolute amylose, amylopectin molecular weight, gyration radii, starch gelatinization, and amylose-lipid complex thermal transition temperatures. Starch from the 150–300 μm sieve fraction had significantly lower peak, final, and setback viscosity compared with the starch isolated from the 300–850 μm and <150 μm sieve fractions. Starch removed from the oat bran fraction during β-glucan enrichment may have different applications compared with starch obtained from other kernel compartments. Because pin-milling decreased apparent amylose content and shortened amylopectin branch chains, its potential to alter starch structure should be considered.  相似文献   

6.
Dent corn (Zea mays L.) and sorghum (Sorghum bicolor L. Moench) sample sets representative of commonly grown hybrids and diverse physical attributes were analyzed for alkaline cooking performance. The influence of kernel characteristics including hardness, density, starch properties (thermal, pasting, and crystallinity), starch content, protein content, and prolamin content on alkaline cooking performance was also determined. Corn nixtamal moisture content was lower for hard, dense kernels with high protein contents; sorghum nixtamal moisture content was lower for kernels with low moisture contents and low starch relative crystallinities. Statistically significant (P < 0.05) regression equations showed that corn nixtamal moisture content was influenced by TADD (tangential abrasive dehulling device) index, kernel moisture content, starch content, and protein content; sorghum nixtamal moisture content was influenced by starch relative crystallinity, kernel moisture content, and abrasive hardness index. Pericarp removal was not strongly correlated with kernel characterization tests. Location (environmental) and hybrid (genetic) factors influenced most kernel characteristics and nixtamalization processing variables.  相似文献   

7.
Samples of Argentine maize from 12 landraces were analyzed for starch and amylose content and were evaluated for hardness parameters. Amylose contents of these Argentine landraces were generally higher than for typical dent hybrids grown in the United States. Hardness, as estimated by near‐infrared reflectance; from wavelength shift of the near‐infrared transmittance spectrum absorbance maximum (λmax) in the 610–680 nm region; and by percentage of γ‐zein in zein‐2 (determined by reversed‐phase HPLC), correlated well with classical definitions of endosperm type and with amylose content. Starch content correlated negatively with hardness. Flint landraces varied substantially in amylose and starch content. The strong correlation between amylose content and maize endosperm hardness confirms and strengthens previous observations, and may provide a compositional basis for endosperm quality.  相似文献   

8.
An automated single kernel near‐infrared (NIR) sorting system was used to separate single wheat (Triticum aestivum L.) kernels with amylose‐free (waxy) starch from reduced‐amylose (partial waxy) or wild‐type wheat kernels. Waxy kernels of hexaploid wheat are null for the granule‐bound starch synthase alleles at all three Wx gene loci; partial waxy kernels have at least one null and one functional allele. Wild‐type kernels have three functional alleles. Our results demonstrate that automated single kernel NIR technology can be used to select waxy kernels from segregating breeding lines or to purify advanced breeding lines for the low‐amylose kernel trait. Calibrations based on either amylose content or the waxy trait performed similarly. Also, a calibration developed using the amylose content of waxy, partial waxy, and wild‐type durum (T. turgidum L. var durum) wheat enabled adequate sorting for hard red winter and hard red spring wheat with no modifications. Regression coefficients indicated that absorption by starch in the NIR region contributed to the classification models. Single kernel NIR technology offers significant benefits to breeding programs that are developing wheat with amylose‐free starches.  相似文献   

9.
玉米应力裂纹的显微分析   总被引：7，自引：1，他引：7  
观察了３种应力裂纹类型（单裂、双裂、龟裂）玉米的内部显微结构和应力裂纹产生的位置、数量、宽度，分析了应力裂纹在胚乳中扩展的情况以及应力裂纹对胚乳结构产生的影响。裂纹的类型不同，裂纹的形态、数量及大小亦不同。应力裂纹生成在粉质胚乳的中心部位，沿淀粉颗粒的边缘向外扩展。应力裂纹是内部裂纹，只能扩展到种皮附近，接近糊粉层。  相似文献   

10.
The variability in grain and starch characteristics and their relationship with the accumulation of starch granule associated proteins were investigated in five maize landraces of Northwest Mexico (Blando de Sonora, Chapalote, Elotero de Sinaloa, Reventador, and Tabloncillo). Significant differences were observed in grain hardness related traits, starch physicochemical properties, and structural properties. Blando de Sonora showed very soft grains, whereas the hardest grains were observed for Chapalote and Reventador. Starch granules isolated from landraces with hard grains contained more amylose and showed polygonal shapes, lower crystallinity and enthalpy of gelatinization, and greater retrogradation and proportion of long amylopectin chains. Proteomic analysis identified the enzymes granule‐bound starch synthase I (GBSSI), starch synthase I and IIa, starch branching enzyme IIb, sucrose synthase 1, and pyruvate phosphate dikinase 2 as granule‐associated proteins. The abundance of GBSSI correlated significantly with amylose content, consistent with the positive correlation observed between amylose and grain hardness. These results showed that the variability in the characteristics evaluated was mainly related to changes in the proportion of amylose in the starch granules, which were associated with differences in the expression of GBSSI. This information may be useful to define strategies for the exploitation and conservation of the landraces.  相似文献   

11.
Protein and starch determinants of maize kernel hardness and extruded products were characterized to better define the role of endosperm texture during extrusion. Maize physical properties were correlated with total proteins and zein subclasses (p < 0.01). The extrusion process significantly altered protein solubility and increased protein fragmentation as measured by RP-HPLC and size exclusion chromatography. Harder grits and extrudates demonstrated higher amylose content, lower degree of starch damage, and fragmentation at different screw speeds than softer grits and extrudates. Differences in extrudate expansion ratio, water absorption index, water solubility index, oil absorption capacity, and breaking stress between harder and softer hybrids were related to protein aggregation and fragmentation as well as starch damage and fragmentation.  相似文献   

12.
Broken corn created by grounding sound corn kernels was added back at levels of 0, 4, 8, 12, or 16%, by weight, to whole kernels of three corresponding hybrids: FR27 × FRMo17 (a soft endosperm corn), FR618 × FR600 (amedium‐hard endosperm corn), and FR618 × LH123 (a hard endosperm corn). The samples had been dried from 28% moisture content to 15% moisture content either by using ambient air at ≈25°C or at 110°C. Samples were steeped for 36 hr at 52°C in 0.15% sulfur dioxide and 0.5% lactic acid steeping solution. The steepwater characteristics, such as water absorption, solids and protein content in the steepwater, and steepwater pH, were measured by periodic sampling and analyzed. Broken corn level has a significant effect on the amount of solids released during steeping and steepwater protein content for all samples. Both steepwater solids and protein content increased linearly as broken corn content increased. Corn drying temperature, kernel hardness, and interactions between drying temperature and kernel hardness has a significant effect on steepwater solids and protein content and steepwater pH in both broken and unbroken corn. Corn dried at low temperature released more soluble solids and protein into the steepwater than corn dried at high temperature. Soft endosperm and medium‐hard endosperm corn released more soluble solids and protein into the steepwater than hard endosperm corn. Soft endosperm corn resulted in a higher steepwater pH than medium‐hard and hard endosperm corn. No significant effect of broken corn content on final moisture content of steeped corn and steepwater pH was observed.  相似文献   

13.
Chemical composition, molecular structure and organization, and thermal and pasting properties of maize and potato starches fractionated on the basis of granule size were investigated to understand heterogeneity within granule populations. For both starches, lipid, protein, and mineral contents decreased and apparent amylose contents increased with granule size. Fully branched (whole) and debranched molecular size distributions in maize starch fractions were invariant with granule size. Higher amylose contents and amylopectin hydrodynamic sizes were found for larger potato starch granules, although debranched molecular size distributions did not vary. Larger granules had higher degrees of crystallinity and greater amounts of double and single helical structures. Systematic differences in pasting and thermal properties were observed with granule size. Results suggest that branch length distributions in both amylose and amylopectin fractions are under tighter biosynthetic control in potato starch than either molecular size or amylose/amylopectin ratio, whereas all three parameters are controlled during the biosynthesis of maize starch.  相似文献   

14.
Development of high‐protein digestibility (HPD)/high‐lysine (hl) sorghum mutant germplasm with good grain quality (i.e., hard endosperm texture) has been a major research objective at Purdue University. Progress toward achieving this objective, however, has been slow due to challenges posed by a combination of genetic and environmental factors. In this article, we report on the identification of a sorghum grain phenotype with a unique modified endosperm texture that has near‐normal hardness and possesses superior nutritional quality traits of high digestibility and enhanced lysine content. These modified endosperm lines were identified among F6 families developed from crosses between hard endosperm, normal nutritional quality sorghum lines, and improved HPD/hl sorghum mutant P721Q‐derived lines. A novel vitreous endosperm formation originated in the central portion of the kernel endosperm with opaque portions appearing both centrally and peripherally surrounding the vitreous portion. Kernels exhibiting modification showed a range of vitreous content from a slight interior section to one that filled out to the kernel periphery. Microstructure of the vitreous endosperm fraction was dramatically different from that of vitreous normal kernels in sorghum and in other cereals, in that polygonal starch granules were densely packed but without the typically associated continuous protein matrix. We speculate that, due to the lack of protein matrix, such vitreous endosperm may have more available starch for animal nutrition, and possibly have improved wet‐milling and dry‐grind ethanol processing properties. The new modified endosperm selections produce a range that approaches the density of the vitreous parent, and have lysine content and protein digestibility comparable to the HPD/hl opaque mutant parent.  相似文献   

15.
优质小麦子粒淀粉组成与糊化特性对氮素水平的响应   总被引：1，自引：0，他引：1  
在大田条件下,选用3个不同类型优质小麦品种: 豫麦47（强筋品种）、山农8355（中筋品种）和豫麦50（弱筋品种）,设置3个氮肥水平: 施N 0、15和30 g/m2,研究了小麦子粒淀粉的粒度分布、直支链淀粉组成、糊化特性及其对氮素水平的响应。结果表明,优质小麦子粒中淀粉粒的粒径分布范围为1～45 μm,其数目分布呈单峰或双峰曲线变化,体积和表面积分布均呈双峰曲线变化,峰谷位于10 μm处; 据此可将淀粉粒分为两种类型: A型大淀粉粒（10～45 μm）和B型小淀粉粒（1～10 μm）。优质小麦子粒淀粉粒组成存在显著的基因型差异。强筋品种豫麦47子粒中B型淀粉粒的比例较高,弱筋品种豫麦50子粒中A型淀粉粒的比例较高,中筋品种山农8355居中。施氮水平对优质小麦子粒中淀粉的粒度分布存在显著影响。在本试验条件下,随氮素水平的提高,强筋品种豫麦47子粒中A型淀粉粒的比例提高,而B型淀粉粒的比例下降; 增施氮肥后弱筋品种豫麦50和中筋品种山农8355子粒中B型淀粉粒的比例增大,而A型淀粉粒的比例降低,且前者变化的幅度较大。适量增施氮肥提高优质小麦子粒中的淀粉含量,氮肥用量进一步增大后,淀粉含量降低; 增施氮肥后优质小麦子粒中直链淀粉含量降低。增施氮肥对优质小麦子粒淀粉的糊化特性存在较大影响,且此影响的趋势因基因型和施氮量而异。其中强筋品种豫麦47表现为低谷粘度、最终粘度、反弹值、糊化温度和峰值时间提高,而高峰粘度和稀懈值降低; 当氮肥用量增大至30 g/m2时,糊化温度和峰值时间降低,而以粘度为单位的参数均提高。弱筋品种豫麦50表现为增施氮肥后,RVA参数呈下降趋势,与之相对应中筋品种山农8355的呈上升趋势。相关性分析表明,B型淀粉粒的数目、体积和表面积比例与高峰粘度和稀懈值存在显著正相关; 与低谷粘度、最终粘度和反弹值存在显著负相关。子粒中直链淀粉含量、支链淀粉含量和总淀粉含量与高峰粘度和稀懈值呈显著负相关,与低谷粘度、最终粘度、反弹值和峰值时间呈一定程度正相关; 直链淀粉相对含量与RVA特征参数之间的相关趋势与子粒中直链淀粉含量的趋势一致,但均未达显著水平。由此可以认为,氮肥通过调控小麦子粒中淀粉的直、支链组成和粒度分布而影响其糊化特性。  相似文献   

16.
Samples from four market lots of hard red winter and soft red winter wheat containing sprout- and scab-damaged kernels were used to test a prototype single-kernel density micropycnometer. Fifteen kernels for each damage type and an equal number of healthy kernels were weighed to the nearest 0.01 mg, then measured for volume to the nearest 1.0 μL. Volume measurements for all kernels were performed three consecutive times with the micropycnometer, then kernels were evaluated for weight, size, moisture, and hardness using a Single Kernel Characterization System. The structure of the sampling plan and the goals of the study indicated that a mixed-model statistical analysis was needed. The fixed effects were wheat class and type of kernel, and the random effects included lot, the interaction of lot with class and kernel type, kernels within each lot, and repeated measures of single-kernel density. Results indicated that variability of the three measurements per kernel did not depend on type of kernel or class of wheat. The standard deviation for repeated density measurements was 0.0029 g/cm3. Kernel-to-kernel variability changed depending on the type of kernel; healthy and sprout-damaged kernels showed similar variability in density, whereas scab damaged kernels had a variance about four to five times higher. Type of kernel significantly affected mean density; healthy kernels averaged 1.28 g/cm3, sprout-damaged kernels averaged 1.19 g/cm3, and scab-damaged kernels averaged 1.08 g/cm3. Wheat class did not exert a significant influence on singlekernel density. Attempts to predict single-kernel density using kernel weight, size, moisture, and hardness found no relationships of practical importance.  相似文献   

17.
Abstract

Physical characteristics of corn (Zea mays L.) kernels influence end‐use. Agronomic practices including nitrogen (N) fertilization may influence kernel hardness. The objective of this study was to determine if com endosperm characteristics influence the effect of N fertilization on kernel hardness and breakage susceptibility. In 1988, six corn hybrids differing for endosperm were grown at two locations in Ohio and with two N rates (34 and 200 kg/ha). Kernels of the waxy hybrid were denser less susceptible to breakage than its near‐isogeneic normal counterpart. Soft kernels weighted less and were less dense than hard kernels, but these two hybrid classifications did not differ for breakage susceptibility. Hard kernels possessed a greater resistance to grinding than soft kernels. Increasing N fertilizer rate increased resistance to grinding and reduced susceptibility to breakage of both soft and hard endosperm types. Fertilization with N not only affects corn grain yield, but also affects physical characteristics that are important to end‐users.  相似文献   

18.
Changes in the digestibility and the properties of the starch isolated from normal and waxy maize kernels after heat‐moisture treatment (HMT) followed by different temperature cycling (TC) or isothermal holding (IH) conditions were investigated. Moist maize kernels were heated at 80°C for 2 hr. The HMT maize kernels were subjected to various conditions designed to accelerate retrogradation of the starch within endosperm cells. Two methods were used to accelerate crystallization: TC with a low temperature of –24°C for 1 hr and a high temperature of 20, 30, or 50°C for 2, 4, or 24 hr for 1, 2, or 4 cycles, and IH at 4, 20, 30, or 50°C for 24 hr. The starch granules were then isolated from the treated kernels. The starch isolated from HMT normal maize kernels treated by TC using –24°C for 1 hr and 30°C for 2 hr for 2 cycles gave the greatest SDS content (24%) and starch yield (54%). The starch isolated from HMT waxy maize kernels treated by TC using –24°C for 1 hr and 30°C for 24 hr for 1 cycle had an SDS content of 19% and starch yield of 43%. The results suggest that TC after HMT changes the internal structure of maize starch granules in a way that results in the formation of SDS (and RS). They also suggest that thermal treatment of maize kernels is more effective in producing SDS than is the same treatment of isolated starch. All starch samples isolated from treated normal maize kernels exhibited lower peak viscosities, breakdown, and final viscosities and higher pasting temperatures than did the control (untreated normal maize starch). Although peak viscosities and breakdown of the starch isolated from treated waxy maize kernels were similar to those of the control (untreated waxy maize starch), their pasting temperatures were higher. The starch isolated from treated normal and waxy maize kernels with the highest SDS contents (described above) were further examined by DSC, X‐ray diffraction, and polarized light microscopy. Onset and peak temperatures of gelatinization of both samples were higher than those of the controls. Both retained the typical A‐type diffraction pattern of the parent starches. The relative crystallinity of the starch from the treated normal maize kernels was higher than that of the control, while the relative crystallinity of the starch from the treated waxy maize kernels was not significantly different from that of the control. Both treated starches exhibited birefringence, but the granule sizes of both starches, when placed in water, were slightly larger than those of the controls.  相似文献   

19.
The Perten Single Kernel Characterization system is the current reference method for determination of single wheat kernel texture. However, the SKCS 4100 calibration method is based on bulk samples. The objective of this research was to develop a single-kernel hardness reference based on single-kernel particle-size distributions (PSD). A total of 473 kernels, drawn from eight different classes, was studied. Material from single kernels that had been crushed on the SKCS 4100 system was collected, milled, then the PSD of each ground single kernel was measured. Wheat kernels from soft and hard classes with similar SKCS hardness indices (HI 40–60) typically had a PSD that was expected from their genetic class. That is, soft kernels tended to have more particles at <21 μm than hard kernels after milling. As such, a combination of HI and PSD gives better discrimination between genetically hard and soft classes than either parameter measured independently. Additionally, the use of SKCS-predicted PSD, combined with other low level SKCS parameters, appears to reduce classification errors into genetic hardness classes by ≈50% over what is currently accomplished with HI alone.  相似文献   

20.
Our report shows the calcium ion diffusion process through the different parts of maize kernels (pericarp, endosperm, and germ) during the traditional nixtamalization process as a function of steeping time (t) 0–24 hr. The cooking step of the nixtamalization process used 3 kg of maize kernels in 6L of water and 2% calcium hydroxide (w/w). The cooking temperature was 92°C for 40 min. The calcium content of the samples was measured using atomic absorption spectroscopy. We found that the whole instant corn flour, pericarp, endosperm, and germ, had a nonlinear relationship to steeping time, showing a local maximum at 9 hr. Analysis of the different parts of the nixtamalized kernels showed that in short steeping times (0–5 hr) calcium diffusion took place mainly in the pericarp. Calcium diffusion in the endosperm and germ occurred gradually over longer steeping times. However, the physical state of the kernels (broken kernels) accelerated the diffusion process. Calcium diffusion occurred first in the pericarp, followed by the endosperm and germ. Immediately after cooking (t = 0 hr), we found a 1.148% calcium content in the pericarp, 0.007% in the germ, and 0.028% in the endosperm. After 24 hr of steeping, the calcium contents were 2.714% in the pericarp, 0.776% in the germ, and 0.181% in the endosperm. In another study, the calcium content in the endosperm was measured by first separating the 10% from the outermost, followed by another 10% from the next endosperm tissue, and concluding with the remaining 80%. Calcium ions were present mainly in the outermost layers of the endosperm. The damaged kernels steeped for more than 5 hr showed greater calcium concentrations than the undamaged counterparts.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号