首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 171 毫秒
1.
Abstract

Surface horizons from Podzolic and Gleysolic soils were collected in various parts of the province of Quebec, Canada, and equilibrated with various amounts of KH2PO4 in 0.01 M CaCl2 for 48 hours. P sorption data conformed to the linear form of the Langmuir and Freundlich equations. P solubility isotherms showed evidence of hydroxyapatite formation in most samples studied, whereas equilibration solutions of only few samples were saturated with respect to either dicalcium phoshate dihydrate or octocalcium phosphate. These reaction products were associated to soil pH and levels of added phosphate. The average values of the Langmuir sorption maximum for these studied Gleysolic and Podzolic samples were 763 and 1096 μg/g respectively. These values were higher than those obtained by the segmented and modified Freundlich models.

Relationships between the soil characteristics and P sorption parameters were evaluated by regression analysis. Among all variables, oxalate‐extractable Fe plus Al content of the Podzolic samples and the ratio of oxalate—extractable Al to clay of the Gleysolic samples gave the best significant correlation coefficients. Furthermore, soil pH and various ratios such as pyrophosphate‐extractable Fe and Al, oxalate‐extractable Fe and organic matter to clay were found to be significantly correlated only with the P sorption parameters of the Gleysolic samples.  相似文献   

2.
Abstract

Phosphate (P) sorption characteristics of six natural Ghanaian Oxisols, selected because of their hydrological and topographical suitability for agriculture, were evaluated. Availability of P appears to be adequate for half of the soils as suggested by the Bray P1 test and determination of the standard P requirement (SPR), i.e., the amount of P sorbed at a concentration of 0.2 ppm P (6.46 μM). The SPR was found to be very closely related to Pmax (Langmuir P sorption capacity), which in turn, was significantly correlated with oxalate‐extractable aluminum (Al) (Alo) and iron (Fe) (Feo) and related (not significantly) to the difference between dithionite‐citrate‐bicarbonate‐extractable Fe (Fed) and oxalate‐extractable Fe. Accordingly, Pmax is fairly well predicted by the model of Borggaard: Pca]e=0.211#lbÀlo+0.115#lbFeo+ 0.05#lb(Fed‐Feo)+0.3, except for one soil strongly enriched in Fe oxides, mainly goethite. This goethite was found by X‐ray diffraction analysis to consist of crystals larger than normally found for pedogenic Fe oxides. The difference between Pmax and Pcalc for this soil could, therefore, be attributed to the occurrence of these large Fe oxide crystals, because P sorption will decrease with increasing crystal size (decreasing specific surface area).  相似文献   

3.
Abstract

Studies were conducted to investigate phosphorus (P)‐sorption characteristics of some intensely weathered soils in south‐central Kentucky. Phosphorus adsorption characteristics reflected the chemical and mineralogical properties of the soils studied. All adsorption data were adequately described by first order kinetic reactions which implied that the soils have uniform surfaces for P sorption. In spite of the limitations of the Langmuir equation, its usefulness in summarizing data into one adsorption maximum value was demonstrated by nearly identical adsorption maxima estimated by three linear transformations of the equation and small deviations from the observed maxima. Variations in adsorption maxima between surface and subsoils and among soils were best correlated with extractable aluminum (Al) (r = 0.93, p<0.01) and crystalline iron (Fe) oxy‐hydroxides (r = 0.97, p<0.01). Clay content was also highly correlated with P sorption (r = 0.97, p <0.01) as well as with extractable Al (r = 0.83, p<0.05) and crystalline Fe oxides (r = 0.92, p<0.01) suggesting that its contribution may have been through its association with these soil components. In contrast, organic matter had a negative association with P sorption (r = ‐0.83, p<0.05). The results indicate higher P sorption in subsoil than in surface horizons, controlled mainly by extractable Al and crystalline Fe oxyhydroxides.  相似文献   

4.
Abstract

Phosphate sorption isotherms were determined for 16 representative major soils developed from different parent materials on Okinawa. Phosphate sorption characteristics were satisfactorily described by the Langmuir equation, which was used to determine phosphorus (P) sorption maxima of the soils. Phosphate sorption maxima ranged from 630 to 2208 mg P kg‐1 soil (mean 1,362 mg P kg‐1). The standard P requirement (i.e., the amount of P required to attain 0.2 mg P L‐1 equilibrium solution) followed the same trend as sorption maximum (r =0.94***), with values ranging from 132 to 1,020 mg P kg‐1 soil (mean 615 mg P kg‐1). This mean value corresponds to fertilizer addition of 923 kg P ha‐1 indicating that the soils have high P fertilizer requirements. Results of simple linear regression analysis indicated that sorption maximum was significantly correlated with clay content, organic matter, oxalate iron (Fe), pyrophosphate Fe, DCB aluminum (Al), oxalate Al, and pyrophosphate Al, but not with DCB Fe, pH, or available P content. The best regression model for predicting sorption maximum was the combination of clay, organic matter, pyrophosphate Fe, and DCB Al which altogether explained 79% of the variance in sorption maximum. The equation obtained could offer a rapid estimation of P sorption in Okinawan soils.  相似文献   

5.
Abstract

The extractant Mehlich‐1 is routinely used in Brazil for determination of soil nutrients, whereas Mehlich‐3 has been suggested as a promising extractor for soil fertility evaluation. Both were used for extraction of molybdenum (Mo) in Brazilian soils with Mo dosage by the KI+H2O2 method. The Langmuir and Freundlich isotherms were used to study soil Mo adsorption. Mehlich‐1 extracted more Mo than Mehlich‐3 in soils with high contents of organic matter, clay, and iron (Fe) oxides. Mehlich‐3 and Mehlich‐1 extractions correlated positively and significantly with amorphous Fe oxides, crystalline Fe oxides, and organic matter. Molybdenum recovering rates correlated to crystalline Fe oxides and clay contents but not to organic matter, pH, and Mo adsorption capacity. Amorphous and crystalline Fe oxides, clay, and organic matter were responsible for most of the Mo adsorption. The Langmuir isotherm described better the Mo adsorption to soil amorphous Fe oxides and organic matter than the Freundlich isotherm.  相似文献   

6.
The dependency of the retention of dissolved organic carbon (DOC) on mineral phase properties in soils remains uncertain especially at neutral pH. To specifically elucidate the role of mineral surfaces and pedogenic oxides for DOC retention at pH 7, we sorbed DOC to bulk soil (illitic surface soils of a toposequence) and corresponding clay fraction (< 2 μm) samples after the removal of organic matter and after removal of organic matter and pedogenic oxides. The DOC retention was related to the content of dithionite‐extractable iron, specific surface area (SSA, BET‐N2 method) and cation exchange capacity (pH 7). The reversibility of DOC sorption was determined by a desorption experiment. All samples sorbed 20–40 % of the DOC added. The DOC sorption of the clay fractions explained the total sorption of the bulk soils. None of the mineral phase properties investigated was able to solely explain the DOC retention. A sorption of 9 to 24 μg DOC m–2 indicated that DOC interacted only with a fraction of the mineral surface, since loadings above 500 μg m–2 would be expected for a carbon monolayer. Under the experimental conditions used, the surface of the silicate clay minerals seemed to be more important for the DOC sorption than the surface of the iron oxides. The desorption experiment removed 11 to 31 % of the DOC sorbed. Most of the DOC was strongly sorbed.  相似文献   

7.
We used the specific surface area (SSA), the cation exchange capacity (CEC) and the content of dithionite‐extractable iron (Fed) to predict the content of organic carbon in illitic clay fractions of topsoils from loess. We determined SSA (BET‐N2 method) and CEC of clay fractions after removing organic C or reducing oxides or both. The CEC and the SSA of the carbon‐ and oxide‐free clay fraction explained 56% and 54% of the variation in C content, respectively. The Fed content of the clay fractions was strongly and negatively related to the C content, and with the SSA of the carbon‐free clay fraction it predicted C content almost completely (R2 = 0.96). The results indicate that the amount of cations adhering to the silicate clay minerals and the size of the silicate mineral surface area are important properties of the mineral phase for the storage potential of C. The reason for the negative relation between iron oxides and C content remains unclear.  相似文献   

8.
Abstract

Surface soils from ten soil series representing five great groups were collected from Alaska. These soils were selected from the important agricultural areas covering a wide geographic distribution. These soils can be divided into two distinct groups based on their parent material: loess and volcanic ash. Phosphorus sorption maxima were calculated based on the Langmuir isotherms. The volcanic ash soils (Cryandept and Cryorthods) showed an average P‐sorption maxima of 10,122 mg/kg and loess soils averaged 3,934 mg/kg. Both groups have similar portions of phosphorus in the organic form (19%) and occluded form (8 to 9%). The nonoccluded‐P in the volcanic ash soils and the loess soils was 68% and 43% respectively, and the Calcium‐P was 4% and 29% respectively.

Regression analysis indicated that aluminum and iron are primarily responsible for P‐sorption. The dithionite extractable Al is responsible for P‐sorption in volcanic ash soils, while oxalate extractable Al is responsible for P‐sorption in loess soils. Dithionite and oxalate extractable Fe probably play a secondary role in P‐sorption. The sorption isotherm, regression analysis and the P‐fractionation data provide the agronomist with useful information to estimate P requirement of newly cleared soils.  相似文献   

9.
Abstract

Few studies have utilized a statistical approach for the evaluation and comparison of breakthrough profiles obtained from soil column investigations. Our objective was to investigate the use of nonlinear estimation techniques to identify the phosphorus (P) breakthrough point and other parameters endemic to breakthrough data. Four soils exhibiting a range in physical and chemical properties were leached under saturated‐flow conditions with a 10 mg P/L solution for 34 d. Leachate P concentrations were analyzed by flow injection colorimetric analysis. A four‐parameter segmented exponential model provided a good fit for the breakthrough data in each soil tested. In addition to identifying the breakthrough point, the model parameters provided estimates of other identifiable aspects of a breakthrough profile including background P concentration, equilibrium P concentration, and the rate of concentration change once breakthrough is attained. Estimation of these parameters also facilitated statistical comparison of breakthrough profiles from different soils. Single and joint hypothesis tests showed that significant differences existed among the breakthrough profiles, the breakthrough points, and the rates of concentration change. Additionally, simulation was used to examine the correlation structure between the estimated breakthrough point and 17 soil properties. The simulation showed that 6 soil properties— ammonium oxalate extractable aluminum (Al) and iron (Fe), citrate dithionite extractable Al, CaCl2 and acetate extractable P, and P sorption capacity— were strongly correlated with P breakthrough.  相似文献   

10.
Phosphate sorption and desorption in soils are markedly influenced by iron oxides, although little is known on how the common iron oxides differ in their behaviour towards added phosphate. In this study, we investigated phosphate sorption and desorption in the clay fractions of 12 Terre Rosse that ranged widely in Fe oxide content, had very low contents of oxalate-extractable Fe oxides and different hematite/goethite ratios. Phosphate sorption at an equilibrium concentration of 1 mg P 1?1 was correlated with the goethite but not with the hematite content of the clay fractions. When phosphate was desorbed by electro-ultrafiltration, the difference in desorption half-time between untreated and deferrified clays was positively correlated with the goethite but not with the hematite content. These results suggest that goethite is more active than hematite in phosphate sorption and retention by soils.  相似文献   

11.
Abstract

Copper (Cu) is bound strongly to organic matter, oxides of iron (Fe) and manganese (Mn), and clay minerals in soils. To investigate the relative contribution of different soil components in the sorption of Cu, sorption was measured after the removal of various other soil components; organic matter and aluminum (Al) and Fe oxides are important in Cu adsorption. Both adsorption and desorption of Cu at various pH values were also measured by using diverse pasture soils. The differences in the sorption of Cu between the soils are attributed to the differences in the chemical characteristics of the soils. Copper sorption, as measured by the Freundlich equation sorption constants [potassium (K) and nitrogen (N)], was strongly correlated with soil properties, such as silt content, organic carbon, and soil pH. The relative importance of organic matter and oxides on Cu adsorption decreased and increased, respectively, with increasing solution Cu concentrations. In all soils, Cu sorption increased with increasing pH, but the solution Cu concentration decreased with increasing soil pH. The cumulative amounts of native and added soil Cu desorbed from two contrasting soils (Manawatu and Ngamoka) during desorption periods showed that the differences in the desorbability of Cu were a result of differences in the physico‐chemical properties of the soil matrix. This finding suggests that soil organic matter complexes of Cu added through fertilizer, resulted in decreased desorption. The proportions of added Cu desorbed during 10 desorption periods were low, ranging from 2.5% in the 24‐h to 6% in the 2‐h desorption periods. The desorption of Cu decreased with increasing soil pH. The irreversible retention of Cu might be the result of complex formation with Cu at high pH.  相似文献   

12.
Abstract

Phosphorus sorption studies were conducted on volcanic ash influenced surface horizons of 29 northern Idaho soils. Results show that the amount of P sorbed was significantly correlated with citrate‐dithionite extractable aluminum (r = .64**), but not with Fe. Other significantly correlated soil properties were: percent base saturation (r = ‐.73**), percent clay (r = .42**), and exchangeable acidity (r = .39*).  相似文献   

13.

Purpose

We review 2,4-dichlorophenoxyacetic acid (2,4-D) and other phenoxy herbicide sorption experiments.

Methods

A database with 469 soil–water distribution coefficients K d (in liters per kilogram) was compiled: 271 coefficients are for the phenoxy herbicide 2,4-D, 9 for 4-(2,4-dichlorophenoxy)butyric acid, 18 for 2-(2,4-dichlorophenoxy)propanoic acid, 109 for 2-methyl-4-chlorophenoxyacetic acid, 5 for 4-(4-chloro-2-methylphenoxy)butanoic acid, and 57 for 2-(4-chloro-2-methylphenoxy)propanoic acid. The following parameters characterizing the soils, solutions, or experimental procedures used in the studies were also compiled if available: solution CaCl2 concentration, pH, pre-equilibration time, temperature, soil organic carbon content (f oc), percent sand, silt and clay, oxalate extractable aluminum, oxalate extractable iron (Oxalate Fe), dithionite–citrate–bicarbonate extractable aluminum, dithionite–citrate–bicarbonate extractable iron (DCB Fe), point of zero negative charge, anion exchange capacity, cation exchange capacity, soil type, soil horizon or depth of sampling, and geographic location. K d data were also compiled characterizing phenoxy herbicide sorption to the following well-defined sorbent materials: quartz, calcite, α-alumina, kaolinite, ferrihydrite, goethite, lepidocrocite, soil humic acid, Fluka humic acid, and Pahokee peat.

Results

The data review suggests that sorption of 2,4-D can be rationalized based on the soil parameters pH, f oc, Oxalate Fe, and DCB Fe in combination with sorption coefficients measured independently for humic acids and ferrihydrite, and goethite.

Conclusions

Soil organic matter and iron oxides appear to be the most relevant sorbents for phenoxy herbicides. Unfortunately, few authors report Oxalate Fe and DCB Fe data.  相似文献   

14.
Phosphate sorption was studied in samples (0 - 20 cm depth) of five soils from Egypt (pH 7.4 - 8.7), four soils from Ethiopia (pH 3.9 - 5.3) and six soils from Germany (pH 3.3 - 7.2). Sorption parameters were calculated according to Pagel and Van Huay (1976) and according to Langmuir (Syers et al., 1973). Phosphate sorption parameters and oxalate extractable Fe and Al (Feox, Alox) were related to the phosphate uptake by young rye plants in Neubauer pot experiments. P sorption parameter after Pagel and Van Huay (A) correlated significantly positively with the Feox and Alox content in acid (r = 0.73) as well as in calcareous soils (r = 0.89) if the whole equilibrium concentration range (0 - 14 mg P/L) was considered. The relations calculated after Langmuir (B) were similar. P uptake by rye in acid soils was negatively correlated with the affinity constant n (r = ?0.76, (A)). In calcareous soils, a negative correlation between P uptake and affinity constant was calculated in the lower P equilibrium range (0 - 2.8 mg P/L) only for (B). Thus, P uptake decreased with increasing strength of P bonding to soil. From these results it is concluded that phosphate sorbed to Fe/Al oxides is an important P source for plants in acid and calcareous soils.  相似文献   

15.
Sorption of phosphorus (P) in complete soil profiles in northern Europe is not adequately documented. I measured the sorption in genetic horizons of four cultivated soils (Inceptisols, Spodosol) in Finland using both field‐moist and air‐dried soil samples, fitted modified Freundlich equations (Q = a × Ib ? q) to the data, and presented the results in quantity/intensity (Q/I) graphs. Least‐squares‐estimates for the parameters of the modified Freundlich equation (a, b, q) were found to be imprecise measures of sorption. Values derived from the fitted equations (the amount of P sorbed at the P concentration of 2 mg litre?1 and P buffering capacity at the same concentration) were more precise. Both were correlated with concentrations of oxalate‐extractable iron and aluminium. In all soils, there was a distinct difference in sorption between the fertilized Ap horizons and the subsurface horizons, which retained P strongly. Most of the sorption capacity was located in the B horizons at depths between 0.3 and 0.7 m. The results demonstrate the effects of soil‐forming processes and human impact on the sorption of P in the soils. Drying the samples prior to the sorption experiments altered the shape of the Q/I graphs. It increased dissolution of P at small P concentrations, sorption at large P concentrations, and the estimates for P buffering capacity. The effects of drying soil samples on the results and the imprecision of the parameters estimated with the modified Freundlich equation should be taken into account when interpreting results of Q/I experiments.  相似文献   

16.
Abstract

The importance of various soil components on copper (Cu) retention by Spodosois was investigated. Copper sorption and extraction were conducted on samples from the B horizon from six Danish Spodosois. The investigation was conducted on untreated samples, on hydrogen peroxide‐treated samples (to remove organic matter), on oxalate‐treated samples [to remove amorphous to poorly crystalline aluminum (Al) and iron (Fe) oxides], on hydroxylamine‐treated samples [to remove manganese (Mn) oxides]. Subfractions treated with hydrogen peroxide (H2O2) were further treated with oxalate and citrate‐bicarbonate‐dithionite (CBD). Sorption of Cu from an initial 10‐6 M solution after 48 hours was determined in the pH range 3 to 7 using 0.1M sodium nitrate (NaNO3) as the background electrolyte. The pH‐dependent sorption curve (sorption edge) was shifted to a higher pH with decreasing Al oxide content in the soils, and for the treated sample after removal of organic matter and Al and Fe oxides. A negligible effect was seen after removal of the Mn oxides because of their low abundance. Extraction of sorbed Cu at pH 4 to 6 with 0.1M nitric acid (HNO3) for 24 hours confirmed the sorption results, in inasmuch as removal of the Al (and Fe) oxides increased Cu extractability. Therefore, it was concluded that in the soils investigated, Cu retention is mainly determined by the oxalate‐extractable Al fraction with a minor contribution due to crystalline Fe oxides.  相似文献   

17.
We evaluated the effect of 1 N NH4OAc and sodium-citrate dithionite extractable forms of soil Fe, Al, and Mn on P-sorption of a flooded acid sulfate soil (Sulfic Tropaquepts) and a non-acid sulfate soil (Typic Tropaquepts) under different soil oxidation-reduction and pH conditions. We used Maha-Phot soil (Sulfic Tropaquepts) and Bangkok soil (Typic Tropaquepts) from the Bangkok Plain, Thailand, and incubated them with 0.2% rice straw under aerobic (O2 atmosphere) and anaerobic (N2 atmosphere) conditions at three different levels of pH (4.0, 5.0, and 6.0) for 6 weeks in stirred soil suspensions with a soil to 0.01 M CaCl2 solution ratio of 1:7. After the incubation period, the soil suspensions in the first treatment (control) were not washed or pretreated with any extractants. For the second treatment (II), the soil suspensions were treated with 1 N NH4OAc (buffered to pH 4.0) to remove Fe, Al, and Mn in exchangeable form. In the third treatment (III), the soils suspensions were treated with sodium citrate dithionite solution (20%) to remove Fe, Al, and Mn in the form of free oxides. The soil residues were then equilibrated with KH2PO4 ranging from 0 to 500 mg P kg-1 soil. Sorption isotherms were described by the classical Langmuir equation. The P-sorption parameters under study were standard P requirement (SPR), Langmuir maximum sorption capacity (X m), Langmuir sorption constant (k), and buffering index (BI). Treating soils with 1 N NH4OAc reduced X m by 32–55%, SPR by 68–84%, and also decreased the differences in P-sorption due to the effects of pH and oxidation-reduction conditions. Significant correlations between the P-sorption parameters and the amount of free iron oxides indicated the primary role of iron oxides in P-sorption of acid sulfate soils. Aluminium oxides seemed to play a secondary role in P-sorption of these soils. Manganese also showed an important effect on P-sorption, but the mechanism is ambiguous.This is a contribution from the Wetland Biogeochemistry Institute, Louisiana State University, Baton Rouge, LA 70803-7511  相似文献   

18.
Vertisols are important cropping soils in tropical and subtropical areas, but in many regions, decades of cropping has substantially reduced concentrations of plant-available phosphorus (P), especially in the subsoil layers. Phosphorus behaviour in P-depleted Vertisols has received comparatively little attention, and the availability of P following the addition of inorganic P fertilisers at different concentrations is poorly understood. In this study, we evaluated short-term P sorption and desorption behaviour in cropped Vertisols in relation to specific soil physical and chemical properties. We collected the surface and subsurface of 15 Australian soils with a broad range of physical and chemical properties, comprising nine Vertisols, three Ferralsols, two Lixisols and one Calcisol. For each soil, we generated sorption and desorption curves (fitted with a Freundlich equation), determined soil physical and chemical properties likely to influence P sorption and evaluated the relationships between the measured soil properties and the Freundlich equation sorption coefficients. The P sorption curves differed drastically between soils, with the sorption equation coefficients (aS × b) significantly correlated with the P buffering index (PBI) and clay content. Clay content itself was correlated with citrate-extractable Fe and Al oxides and BET surface area. Vertisols formed on basaltic parent materials had greater Fe and Al oxide concentrations, resulting in an overall greater P sorption capacity. Sorption and desorption hysteresis were mostly small. The reacting materials in these soils probably had limited ability to continue to react with P. The Vertisols differed in their capacity to replenish P in the soil solution by desorbing different proportions of previously sorbed P, although the proportion of desorbable P generally increased with greater concentrations of sorbed P. These results suggest that for fertiliser management in these soils, smaller volumes of P enrichment combined with higher P concentrations may result in a greater P recovery by the crop.  相似文献   

19.
Abstract

A study of sequential phosphate (P) extraction by water and iron oxide‐impregnated paper strip procedures was carried out on three Italian soils ranging widely in soil characteristics and enriched with three rates of fertilizer P. The degree of change was dependant on P addition, soil P properties, and type of extraction. For the Fe‐oxide strip procedure, a greater release of P than for water extraction was observed for soils with and without added P. At a given level of added P, more P was released from the soil with the lowest P sorption index (SI). However, at a given level of NaHCO3‐extractable P, less P was released from the soil with lower SI than from soil with a higher SI, indicating that a greater available P content was necessary for low P sorbing soils to maintain a given rate of P release. The variation of SI accounted for 96% and 92% of the variation in amount of water‐extractable and Fe‐oxide strip P at a given P addition. Furthermore, SI accounted for 97% and 98% of the variation in water‐extractable and Fe‐oxide P at a given increase in available soil P. Inclusion in a soil testing program of an estimate of the P Sorption Index, that accounts for the overall effect of soil properties affecting sorption in soils (clay content and type, iron and aluminum oxide content, surface area, etc.), may improve fertilizer P requirements for optimum crop growth for certain soils.  相似文献   

20.
As repeatedly reported, soil flooding improves the availability of P to rice. This is in contrast with an increased P sorption in paddy soils. The effects of soil flooding on the transformation of Fe oxides and the adsorption/desorption of P of two paddy soils of Zhejiang Province in Southeast‐China were studied in anaerobic incubation experiments (submerging with water in N2 atmosphere). Soil flooding significantly increased oxalate‐extractable Fe (Feox), mainly at the expense of dithionite‐soluble Fe (FeDCB), as well as oxalate‐extractable P (Pox), but decreased the ratio of Pox/Feox. Flooding largely increased both, P adsorption and the maximum P adsorption capacity. The majority of newly sorbed P in the soils was Pox, but also more newly retained P was found to be not extractable by oxalate. Flooding also changed the characteristics of P desorption in the soils. Due to a decrease of the saturation index of the P sorption capacity, P adsorbed by flooded soils was much less desorbable than that from non‐flooded soils. There are obviously significant differences in the nature of both, the Feox and Pox fractions under non‐flooded and flooded conditions. The degree of the changes in Feox, Pox, P adsorption and P desorption by flooding depended on the contents of amorphous and total Fe oxides in non‐flooded soils. Our results confirm that the adsorption and desorption behavior of P in paddy soils is largely controlled by the transformation of the Fe oxides. The reasons of the often‐reported improved P availability to rice induced by flooding, in spite of the unfavorable effect on P desorbability, are discussed.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号