共查询到20条相似文献，搜索用时 39 毫秒
1.
N-halamine precursor 2,2,6,6-tetramethyl piperidinol (TMP), a hindered amine light stabilizer, was bonded onto cotton fabric by using 1,2,3,4-butanetetracarboxylic acid (BTCA) as a crosslinking agent. A variety of treating conditions including TMP concentration, curing temperature and time, and catalyst were studied. The treated fabrics were characterized using FTIR spectra and scanning electron microscope (SEM). The cotton fabric treated with TMP precursor could be rendered biocidal upon exposure to dilute household bleach. The chlorinated cotton swatches showed great efficacy and inactivated 100 % of Staphylococcus aureus with 7.1 log reduction with 5 min of contact and 83.25 % of E. coli O157:H7 at 10 min of contact. In addition, the wrinkle recovery angle of the treated cotton fabrics increased from 229 ° of untreated cotton fabrics to 253 °. This study provided a practical finishing process to produce cotton fabrics with easy care and antibacterial functionalities at the same time. 相似文献
2.
Our study proposes an enzymatic scouring method for cotton fabrics using the enzyme cutinase. We established cutinase treatment
conditions for cotton fabrics from their relative activity at different pH levels, temperatures, enzyme concentrations, and
treatment times. Weight loss, moisture regain, K/S value, tensile strength, and SEM micrographs of cotton fabrics were analyzed. We determined the optimum cutinase treatment
conditions to be as follows: pH of 9.0, temperature of 50°C, cutinase concentration of 100 %, and a treatment duration time
of 60 min. We discovered that this cutinase treatment hydrolyzed the cuticle of cotton fabrics. The cutinase treatment did
not decrease the moisture regain and the K/S value. The optimum concentrations of Triton X-100 and calcium chloride, which were used as auxiliaries for cutinase treatment,
were found to be 0.5 % (v/v) and 70 mM, respectively. Some cracks were observed on the surface of the cotton fibers; however,
the tensile strength did not decrease. 相似文献
3.
The surface morphology of the CO2 laser treated grey cotton fabrics was studied which showed a characteristics sponge-like structure on cotton fibres after
treating with CO2 laser irradiation. The laser treatment parameters ranging from 100 to 150 pixel time and 40 to 70 dot per inch (dpi) were
irradiated on the grey cotton fabrics directly and the degree of physical modifications, such as surface morphology, wettability
and fabric strength, were changed accordingly with various laser treatment parameters. The surface morphology, wettability
and tensile strength of cotton fibre treating with laser were evaluated using different instruments, such as Scanning Electron
Microscope (SEM), contact angle meter and tensile strength machine. In spite of creating a sponge-like structure on fibre
surface after treating with laser, the wettability of the samples was highly improved but the tensile strength was decreased. 相似文献
4.
The aim of this paper is to improve moisture regain of PET fabrics using a lipase treatment. Effects of nine lipase sources,
lipase activator and nonionic surfactant on moisture regain of PET fabrics are examined. Moisture regains of lipase-treated
samples improve by two times in average compared with untreated and buffer-treated samples. Alkaline treatment creates larger
pitting by more aggressive attack into fiber which is proved by SEM and water contact angle measurement. Moisture regain by
alkaline treatment (0.568 % ± 0.08) does not improve. However, lipase-treatment (L2 treatment) improves moisture regain up
to 2.4 times (1.272 % ± 0.05). Although lipase treatment is more moderate than alkaline treatment, lipase hydrolysis on PET
fabrics improves moisture regain, efficiently. K/S values improved confirm that carboxyl and hydroxyl groups are produced
on the surface of PET fabrics by lipase hydrolysis. Moisture regain and dyeability improve by lipase hydrolysis on PET fabrics. 相似文献
5.
Cotton fabrics exhibiting superhydrophobic and antibacterial properties were prepared through a non-solvent induced phase separation method using hydrophobic poly(vinylidene fluoride) (PVDF) and its hybrids with photocatalytic zinc oxide nanoparticles (nano-ZnO) as surface modifying agents for cotton fabric. The effects of coagulating medium and temperature on microstructural morphology and surface hydrophobictity of the cotton fabrics were investigated by FE-SEM observation and contact angle measurement. Superhydrophobic cotton fabrics exhibiting water contact angle higher than 150 ° could be obtained by coating the fabrics with solutions of PVDF and nano-ZnO followed by coagulation in ethanol as non-solvent. This phenomenon is considered to be originated from both chemically hydrophobic PVDF layer and physical micro- and nano-bumps formed on the surface of cotton fabric, which are essential requirements for Lotus effect. Moreover, antibacterial properties could be synergistically obtained by utilizing photocatalytic effect of nano-ZnO. 相似文献
6.
Deep eutectic solvent, urea-choline chloride (URC), was used to control surface of poly(ethylene terephthalate) (PET) fabric under microwave irradiation with or without sodium hydroxide (NaOH) for hydrophilic-hydrophobic properties. Wicking and contact angle evaluations indicated that the URC-treated PET fabric drastically changed its surface characteristics from highly hydrophobic to highly hydrophilic (or vice versa) by carefully adjusting alkali concentration and microwave irradiation time. For instance, an instant wicking was achieved on URC-treated PET with 1 % NaOH at 60 s of microwave irradiation, whereas highly hydrophobic PET surface with 2600 s wicking time and 135.6 ° contact angle was acquired by adding 5 % NaOH at the same microwave irradiation. Methylene Blue staining and FTIR analyses suggested that a minimal hydrolysis occurred through URC-treatment with NaOH under microwave irradiation and hydrophilicity was mainly achieved by physical disruption of the fiber. The treated fabrics were further analyzed by DSC, TGA, and SEM. Therefore, a rapid control of hydrophilic-hydrophobic surface of PET fabric was achieved with a little side reaction by using environmentally-benign, biodegradable URC deep eutectic solvent. 相似文献
7.
Hydrophobic polypyrrole-coated fabrics with improved electrical conductivity were produced embedding oleic acid as counter-ion. Hydrophobisation of polypyrrole was carried out by means of an ion exchange process after deposition of polypyrrole on cotton fabrics. The fabrics coated with oleic acid-doped polypyrrole showed contact angle of 111°, drop absorption time of 7 minutes and high water repellence, while electrical conductivity increased of ～2 times and heat generation improved, too. Moreover, oleic acid demonstrated a great stability as counter-ion in polypyrrole matrix being present also after washing. 相似文献
8.
In this study, traditional dip-pad-cure (DPC) process and electron beam (EB) irradiation were used to graft cotton fabrics with fluorine containing chemical, 1H,1H,2H,2H-perfluorooctyl acrylate (PFA). The grafted cotton fabrics were characterized by FT-IR and SEM. The water repellent properties were measured by contact angle, hydrostatic pressure, and spry test. It was found that there was no significant difference between the grafted cotton fabrics with DPC and EB methods, and the treated fabrics showed good water-resistant properties. The grafted cotton fabrics also showed good washing stability. By measuring the bending rigidity and bending hysteresis, it was found that the cotton fabrics grafted with PFA became softer than untreated samples. 相似文献
9.
The stearyl methacrylate modified polysiloxane/nanocomposite was synthesized by graft copolymerization between stearyl methacrylate modified polysiloxane with pendent epoxy groups and amino-functionalized nano silica. Then it was utilized to fabricate the superhydrophobic cotton fabric by one-step method. The structures, chemical compositions, thermal properties, surface morphology and wettability were characterized by Fourier Transform Infrared Spectrum (FT-IR), X-ray photoelectron spectroscopy (XPS), Thermo-gravimetric analyzer (TGA), Scanning electron microscopy (SEM) and Static contact angle analyzer. Results showed that a hydrophobic polysiloxane film and many nano-scaled tubercles were coated on the surface of the treated cotton fabrics plus their inherent microscaled roughness, which were the reasons why cotton fabric changed from hydrophilicity to hydrophobicity. In addition, with increase of the amount of nanocomposite, hydrophobicity of the treated cotton fabric would be enhanced; water contact angle of this fabric could attain 157°, which was higher than 141.5° reached by the fabric treated with stearyl methacrylate modified polysiloxane. The superhydrophobic cotton fabric also possessed favorable washing durability. On the other hand, its air permeability, color and softness would not be influenced instead. 相似文献
10.
Jelena?Vasiljevi? Marija?Gorjanc Ivan?Jerman Brigita?Tom?i? Martina?Modic Miran?Mozeti? Boris?Orel Barbara?Simon?i?
Oxygen plasma pre-treatment was applied to cotton fabric with the aim of improving the water repellency performance of an inorganic-organic hybrid sol-gel perfluoroalkyl-functionalized polysilsesquioxane coating. Cotton fabric was pre-treated with low-pressure oxygen plasma for different treatment times and operating powers. Afterward, 1H,1H,2H,2H-perfluorooctyltriethoxysilane (SiF) was applied to the cotton fabric samples using the pad-dry-cure method. The surfaces of the untreated and modified cotton fibers were characterised using Fourier transform infrared spectroscopy, Xray photoelectron spectroscopy, scanning electron microscopy, and atomic force microscopy. The water repellency of the SiF-coated fabric samples was evaluated using static and sliding contact angle measurements with water. The results show that the plasma treatment with the shortest treatment time (10 s) and the lowest operating current (0.3 A) increased the atomic oxygen/carbon ratio of the cotton fiber surface from 0.6 to 0.8 and induced the formation of a nano-sized grainy surface. Increasing the plasma treatment time and/or operating current did not intensify the surface changes of the cotton fibers. Such saturation effects were explained by the large influence of reactive oxygen atoms during the plasma treatment. The measured static water contact angles on the surface of the untreated and plasma pre-treated and SiF-coated cotton fabrics showed that the oxygen plasma pre-treatment enabled the increase of the water contact angle from 135° to ≈150°, regardless of the applied plasma treatment time and discharge power. This improvement in the hydrophobicity of the SiF coating was followed by a decrease in the sliding angle of water droplets by more than 10° compared to the plasma untreated and SiF-coated sample characterized by a water sliding angle of 45°. Additionally, measurements of the water sliding angle revealed that the increase of the static contact angle from 149° to 150° corresponded to a drop of the water sliding angle from 33 to 24°, which suggests that the plasma pre-treatment of 20 s at an operating current of 0.3 A produced the best water-repellent performance of the SiF-coated cotton fabric. 相似文献
11.
The cotton fabrics were dyed by exhaust method using the pigment dispersions as colorant, and meanwhile the effects of particle character on dyeing performance were further investigated. The results showed that the larger zeta potentials, the higher K/S value, pigment uptakes, rubbing and washing fastness of the dyed cotton fabrics were. Adsorption isotherms were belonging to Langmuir type when zeta potentials were about 0.46 mV and 31.39 mV respectively. The cotton fabrics that dyed by the pigment dispersions with small particles had high K/S value, rubbing and washing fastness. The chemical structure of pigment had little influence on pigment uptakes, and all kind of pigment dispersions reach to 98 % uptakes after 30 min but exhibit various uptake rates at initial stage. 相似文献
12.
Danko Abramiuc Luminita Ciobanu Rodica Muresan Magda Chiosac Augustin Muresan 《Fibers and Polymers》2013,14(11):1826-1833
The paper discusses a method to functionalize cotton fabrics using biologically active natural compounds to achieve the antibacterial characteristics required for medical application. The biologically active natural compounds include propolis, beeswax, and chitosan. Three 100 % cotton knitted fabrics with different degrees of compactness were impregnated in the emulsions containing the active ingredients and fabric variant G3 with the highest degree of impregnation was considered for the evaluation of the antibacterial properties and comfort characteristics. The results show that the treated cotton fabric had high antibacterial activity against both gram positive bacteria Staphylococcus aureus and Streptococcus β haemolytic, and gram negative bacteria Escherichia coli and Pseudomonas aeruginosa. The presence of the biologically active natural compounds on the cotton substrates modified the surface of the textile fibers as seen in the SEM images. The treatment also improved fabric comfort properties, the cotton substrates became less air permissive and more hygroscopic after the treatment. The experimental results indicated that propolis, beeswax and chitosan can be applied as an emulsion to functionalize cotton textile materials. The antibacterial performance of the functionalized fabrics suggested that the cotton fabrics treated with those biologically active natural compounds have the potentials to be used in medical fields. 相似文献
13.
α-amylase and pectinase showed good compatibility. A desizing ratio of 95.4 %, a pectin removal rate of 80.4 % and a capillary effect height of 7.1 cm for cotton fabrics treated with α-amylase and pectinase were obtained by a one-bath for bio-desizing and bio-scouring process under the condition of 90 °C for 30 min. After the treatment of the nonionic surfactant Peregal O at 100 °C for 20 min, these important properties for the cotton fabrics were further improved to 98.7 %, 96.8 %, and 18.4 cm separately. The capillary effect height of desized cotton fabrics was improved from 0.2 cm to 6.4 cm by the removal of waxes because its hydrophobic nature of the cotton fabrics. The whole time for this new combining process with high temperature treatment was significantly shortened and it only took about 55 minutes. 相似文献
14.
α,ω-di[(4-butoxy-piperazin-1-yl)-phosphinic acid methyl ether]-terminated linear polysiloxane (PNPDMS) was synthesized and utilized as the flame retardant and hydrophobing agent. The flame retardance and thermal decomposition behaviors of cotton fabrics were systematically estimated by limiting oxygen index (LOI), thermogravimetric analysis and vertical burning test, respectively. It was found that the LOI of cotton fabric treated with PNPDMS enhanced to 29.82 % compared with cotton fabric without treatment, whose LOI was only 18.00 %. The treated cotton fabric showed a shorter char length, a shorter After-flame time, and no After-glow time as revealed in vertical burning test. The mechanical property in treated cotton fabric was slightly decrease. Furthermore, the grade of water repellency of treated cotton fabric reached to 90 and water contact angle (WCA) increased to 141.90° compared with cotton fabric without treatment whose WCA was 62.80°. The result showed that the cotton fabric treated with PNPDMS exhibited excellent flame retardance and hydrophobic properties. 相似文献
15.
A poly(tetrafluoroethylene) (PTFE) sputtering technique was employed to introduce water repellency onto the surfaces of commercial
cotton fabrics. Sputtering power, time, and argon pressure were varied as processing parameters, when PTFE coatings were applied
on the fabrics. Total 27 different samples were prepared to compare their water repellent properties, which were investigated
by contact angle measurements. Morphology of the PTFE coatings were probed by scanning electron microscopy (SEM) and atomic
force microscopy (AFM). Also, the extent of the coating was examined by X-ray photoelectron spectroscopy (XPS). Maximum hydrophobicity
was obtained when PTFE coating was extensive enough to cover cotton fabrics almost completely, and the extensive coating was
the roughest among the samples prepared in this study. 相似文献
16.
UV curing of perfluoro-alkyl-polyacrylate resins able to impart water as well as oil-repellency to cotton fabrics was studied
in comparison with conventional thermal polymerization. The process was assessed through weight gain and gel content measurements
while the properties conferred to cotton fabrics were determined in terms of water and oil contact angles, moisture adsorption,
and water vapor permeability. The polymerization yields were of the same order (>80 %) of those obtained with thermal curing
as well as the high contact angles with water (>127°) and oil (>118°) even at low resin add-on (3 %). UV cured resins yielded
oil contact angles mostly higher than 120° denoting super oil-repellent surfaces. Moreover the water and oil-repellency was
adequately maintained after washing. The moisture adsorption of finished fabrics was lower than that of untreated cotton,
but slightly higher for UV cured than thermally treated fabrics. Water vapor transmission rate showed that the finish treatment,
thermal as well as by UV curing, does not reduce the breathability of the original cotton. DSC analysis demonstrated that
the fiber pyrolysis is affected by the polymer add-on, while FTIR-ATR spectra of all finished fabrics showed typical peaks
of ester and C-F groups. XPS analysis showed small differences between thermal and UV curing coatings with each resin, while
coatings with the lowest percentage of fluorine groups did not affect the water and oil-repellency. 相似文献
17.
Liping Liang Chenlu Wang Hongfang Wang Haihua Zhan Xu Meng 《Fibers and Polymers》2018,19(9):1828-1834
The cotton fabric was modified with dopamine methacrylamide (DMA) based on mussel-inspired reaction and polymerized with zwitterionic sulfobetaine methacrylate (SBMA) through free radical polymerization reaction. The poly(DMA-SBMA) contained not only key chemical constituents of dopamine hydrochloride, which strongly adsorbed to fabric substrates, but also hydrophilic groups, providing a hydrophilic surface for fabric due to its strong interaction with water via electrostatic interactions. The chemical structure, surface topography, and surface wettability of the fabric were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and contact angle experiments, respectively. The results showed that the water contact angle (WCA) of the treated fabric was ~0 °, whereas the underwater oil contact angle (OCA) was ~161 °, as compared to ~25 ° for the control one. It is expected that as-prepared fabrics could be applied in oil/water separation due to such special superhydrophilicity and superoleophobicity. 相似文献
18.
Chien-Wen Chen Mu-Cheng Kuo Jyh-Horng Wu Ming-Shien Yen Sing-You Lai 《Fibers and Polymers》2017,18(10):1945-1955
A series of hybrid materials composed of zirconia, silica, and thiazole dyes were synthesized from zirconium npropoxide (ZNP) and tetraethoxysilane (TEOS) using heteroaryl 2-amino-thiazole azo dyes, and prepared via the sol-gel process. The heterocyclic 2-amino-thiazole azo dyes underwent a hydrolysis-condensation reaction with an appropriate proportion of ZNP under a catalyst, using a constant ratio of vinyltriethoxysilane (VTES) and TEOS. The structures of these hybrid materials composed of zirconia/silica/thiazole dyes were characterized using Fourier transform infrared (FT-IR) analysis. The surface morphologies of the polyethylene terephthalate (PET) fabrics were evaluated using scanning electron microscopy (SEM). The SEM images demonstrated the uniform dyeing of the PET fabrics, which confirmed the reaction of the hybrid materials with the PET fabrics. The water contact angle, washing fastness, color uniformity, and warmth retention of the PET fabrics dyed with the hybrid materials composed of the zirconia/silica/thiazole dyes were evaluated. The evaluation results indicated that these fabrics offered enhanced warmth retention properties and good water repellency. 相似文献
19.
A series of some novel hybrid materials prepared via a sol-gel process have been synthesized from methyltrimethoxysilane and titanium n-butoxide with heterocyclic thiazole azo dyes. Silica/titania/thiazole azo dyes hybrid materials were synthesized via a sol-gel process with a precursor system. Alternatively, the heterocyclic thiazole azo dyes were catalytically processed by means of hydrolysis-condensation reactions with appropriate amounts of a mixture of vinyltriethoxysilane, methyltrimethoxysilane, and titanium n-butoxide at a fixed molar ratio. The structure of these hybrid silica/titania/thiazole dye materials was characterized by Fourier transform infrared (FT-IR) analysis. The surface morphology of processed PET/PA6 nonwoven fabrics was evaluated by scanning electron microscopy (SEM). SEM images showed uniform dyeing, thereby confirming the reaction of the hybrid materials with the PET/PA6 nonwoven fabrics. The water contact angle, washing fastness, color evenness, air permeability, and weatherability characteristics of the as-prepared dyed PET/PA6 nonwoven fabrics were subsequently evaluated. Results revealed improved weatherability and good water repellency. Further, it was also revealed that dyeing and finishing could be achieved in a single bath, which is advantageous to reduce processing costs. 相似文献
20.
Alkaline hydrolysis is one of the most classic fiber finishing methods, however, its potential as tuning surface superhydrophobicity in mass scale has not been studied much. In this research, fine roughness was formed on the polyester fiber surfaces by alkaline hydrolysis at room temperature and fluorinated polymer mixtures were further coated. The developed superhydrophobic fabrics were evaluated in terms of structural changes, mechanical properties, surface hydrophobicity, and permeability for practical applications. As alkaline hydrolysis treatment time increased, surface roughness was increased as a lot of nano-craters were generated with the decrease of fabrics weight and tensile strength as well. As air pockets formed through nano-craters on the fiber surfaces, static contact angle increased, and shedding angle tended to decrease. In this study, the sample treated with alkaline hydrolysis for 20 minutes showed the highest static contact angle of 167.8±1.3° and lowest shedding angle of 4.4±2.3°. Considering tensile strength loss, however, the 15-minute alkaline hydrolyzed fabrics which showed static contact angle of 162.2±2.7° and shedding angle of 8.8±0.2° was selected as the optimal condition for practical application. The newly developed superhydrophobic fabrics were found to have higher water vapor and air permeability than those of untreated samples. At the same time, fluoropolymer coating played a certain role for tensile strength and water vapor permeability demonstrating the importance of understanding and designing proper fluorinated-compound treatment processes. 相似文献