首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 437 毫秒
1.
Lamb carcasses (n = 278) were selected immediately after slaughter and fat thickness was measured with the SP2 Hennessy grading probe (HP) at the interface of the 12th and 13th ribs, 3.8 cm from the backbone. After a 24-h chilling period, carcasses were graded by a USDA grader and probed with the HP to obtain a fat thickness measure on the chilled carcass. One hundred sixty-five carcasses were fabricated into wholesale cuts (.64 cm of external fat trim), and 113 carcasses were fabricated into tray-ready retail cuts (.25 cm of external fat trim). Carcass weight, fat thickness (metal probe), adjusted fat thickness, hot and chilled carcass HP fat measures, as well as kidney and pelvic fat percentage and USDA yield grade, were highly correlated to cutting yield for both fabrication methods. Regression models developed to predict wholesale cut yields using HP or grader-collected measures were similar with respect to predictive accuracy. Fat thickness explained most of the variation in wholesale and tray-ready cut yields among the variables collected by the grader. Kidney and pelvic fat accounted for more of the variation in yield of wholesale cuts during stepwise regression to determine HP equations, but for predicting tray-ready yields, fat thickness taken with the HP accounted for the largest amount of variation. Equations developed to predict tray-ready retail cut yields using the HP or USDA grader-collected carcass measures were similar in the amount of variation explained. Kidney and pelvic fat percentage must be included in equations to maximize predictive accuracy when this depot site is left in carcasses.  相似文献   

2.
Seven hundred and three native and crossbred Chinese Yellow cattle (mean live weight: 523 ± 38 kg) were slaughtered, chilled and segmented. The hot carcass weight (HCW, kg), fat thickness (FT, cm) and rib eye area (REA, cm2) were measured to predict weights and percentages of beef cattle retail cuts. A correlation analysis showed that the HCW and REA were positively correlated with the weights of the total retail cuts (TRC, kg), top grade retail cuts, prime retail cuts and percentage of total carcass weight. A regression analysis indicated that HCW and REA were the best predictors for the weight of total retail cuts (Y = ?16.71 + 0.382 HCW + 0.593 REA), and the HCW explained more of the variation than REA. Meanwhile, HCW and REA accounted for 62% of the variation of percentage of total retail cuts (Y = 43.24 ? 0.025 HCW + 0.170 REA), whereas the REA was more valuable than the HCW. The FT contributed little in estimating weight or percentage of retail cuts.  相似文献   

3.
The objective of this study was to develop prediction equations for estimating proportional carcass yield to a variety of external trim levels and bone-in and boneless pork primal cuts. Two hundred pork carcasses were selected from six U.S. pork processing plants and represented USDA carcass grades (25% USDA #1, 36% USDA #2, 25% USDA #3, and 14% USDA #4). Carcasses were measured (prerigor and after a 24 h chill) for fat and muscle depth at the last rib (LR) and between the third and fourth from last rib (TH) with a Hennessy optical grading probe (OGP). Carcasses were shipped to Texas A&M University, where one was randomly assigned for fabrication. Selected sides were fabricated to four lean cuts (ham, loin, Boston butt, and picnic shoulder) then fabricated progressively into bone-in (BI) and boneless (BL) four lean cuts (FLC) trimmed to .64, .32, and 0 cm of s.c. fat, and BL 0 cm trim, seam fat removed, four lean cuts (BLS-OFLC). Total dissected carcass lean was used to calculate the percentage of total carcass lean (PLEAN). Lean tissue subsamples were collected for chemical fat-free analysis and percentage carcass fat-free lean (FFLEAN) was determined. Longissimus muscle area and fat depth also were collected at the 10th and 11th rib interface during fabrication. Regression equations were developed from linear carcass and OGP measurements predicting FLC of each fabrication point. Loin muscle and fat depths from the OPG obtained on warm, prerigor carcasses at the TH interface were more accurate predictors of fabrication end points than warm carcass probe depth obtained at the last rib or either of the chilled carcass probe sites (probed at TH or LR). Fat and loin muscle depth obtained via OGP explained 46.7, 52.6, and 57.1% (residual mean square error [RMSE] = 3.30, 3.19, and 3.04%) of the variation in the percentage of BI-FLC trimmed to .64, .32, and 0 cm of s.c. fat, respectively, and 49.0, 53.9, and 60.7% (RMSE = 2.91, 2.81, and 2.69%) of the variation in the percentage of BL-FLC trimmed to .64, .32, and 0 cm of s.c. fat, respectively. Fat and loin muscle depth from warm carcass OGP probes at the TH interface accounted for 62.4 and 63.5% (RMSE = 3.38 and 3.27%) of the variation in PLEAN and FFLEAN, respectively. These equations provide an opportunity to estimate pork carcass yield for a variety of procurement end point equations using existing on-line techniques.  相似文献   

4.
Feedlot traits, carcass traits and distribution of commercial cuts of crossbred intact male progeny (n = 556) from young and mature Hereford, Red Poll, Hereford X Red Poll, Red Poll X Hereford, Angus X Hereford, Angus X Charolais, Brahman X Hereford and Brahman X Angus dams were evaluated. First-calf heifers were bred to Red Angus bulls; Santa Gertrudis sires were used for each cow's second and third breeding seasons. Calves from these young dams were slaughtered at 13 mo. Calves of mature dams were all sired by Limousin bulls and slaughtered at 12 mo. Dam breed was a major source of variation in most bull traits. Progeny of Brahman-cross dams were inferior (P less than .01) in daily gain, final weight, carcass weight and in edible cuts/day of age compared with progeny from Bos taurus dams. Intact male progeny of Angus X Charolais dams ranked highest in longissimus area, cutability, and edible cuts/day of age. The range of dam breed means in percentage of steak, roast, bone-in cuts (chuck short ribs and back ribs), short plate and thin cuts, and lean trim was just over 1%. Greater variation among dam breeds existed in fat measurements. Analyses in which Hereford-Red Poll diallel data for young dams and mature dams were combined showed positive maternal heterosis for dressing percentage (P less than .05), carcass weight (P less than .05), carcass weight/day of age (P less than .05), estimated carcass fat (P less than .05), fat thickness (P less than .01) and marbling score (P less than .01). Reciprocal effects were inconsequential. Results illustrate the importance of dam breed-type effects in formulating breeding strategies for commercial beef herds.  相似文献   

5.
Pork carcasses (n = 133) were used to investigate the influence of carcass fatness and muscling on composition and yields of pork primal and subprimal cuts fabricated to varying levels of s.c. fat. Carcasses were selected from commercial packing plants in the southeastern United States, using a 3 x 3 factorial arrangement with three levels of 10th rib backfat depth (< 2.03, 2.03 to 2.54, and > 2.54 cm) and three levels of loin eye area (LEA; < 35.5, 35.5 to 41.9, and > 41.9 cm2). Sides from the selected carcasses were shipped to the University of Georgia for carcass data collection by trained USDA-AMS and University of Georgia personnel and fabrication. Sides were fabricated to four lean cuts (picnic shoulder, Boston butt, loin, and ham) and the skinned belly. The four lean cuts were further fabricated into boneless cuts with s.c. fat trim levels of 0.64, 0.32, and 0 cm. The percentages of four lean cuts, boneless cuts (four lean cuts plus skinned, trimmed belly) at 0.64, 0.32, and 0 cm s.c. fat, fat-free lean, and total fat were calculated. Data were analyzed using a least squares fixed effects model, with the main effects of 10th rib backfat and LEA and their interaction. Fatness and muscling traits increased (P < 0.05) as 10th rib backfat and LEA category increased, respectively. However, fat depth measures were not affected greatly by LEA category, nor were muscling measures greatly affected by backfat category. The percentage yield of cuts decreased (P < 0.05) as backfat category increased. Cut yields from the picnic shoulder, Boston butt, and belly were not affected (P > 0.05) by LEA category, whereas the yield of boneless loin and ham increased (P < 0.05) as LEA category increased. Compositionally, the percentage of four lean cuts, boneless cuts at varying trim levels, and fat-free lean decreased incrementally (P < 0.05) as backfat depth increased, whereas parentage total fat and USDA grade increased (P < 0.05) as backfat depth increased. As LEA increased, percentage boneless cuts trimmed to 0.32 and 0 cm s.c. fat and fat-free lean increased and total fat decreased; however, the difference was only significant in the smallest LEA category. Collectively, these data show that decreased carcass fatness plays a greater role in increasing primal and subprimal cut yields and carcass composition than muscling even in lean, heavily muscled carcasses.  相似文献   

6.
This study was conducted to determine the ability of additional ultrasound measures to enhance the prediction accuracy of retail product and trimmable fat yields based on weight and percentage. Thirty-two Hereford-sired steers were ultrasonically measured for 12th-rib fat thickness, longissimus muscle area, rump fat thickness, and gluteus medius depth immediately before slaughter. Chilled carcasses were evaluated for USDA yield grade factors and then fabricated into closely trimmed, boneless subprimals with 0.32 cm s.c. fat. The kilogram weight of end-point product included the weight of trimmed, boneless subprimals plus lean trim weights, chemically adjusted to 20% fat, whereas the fat included the weight of trimmed fat plus the weight of fat in the lean trim. Prediction equations for carcass yield end points were developed using live animal or carcass measurements, and live animal equations were developed including ultrasound ribeye area or using only linear measurements. Multiple regression equations, with and without ultrasound rump fat thickness and gluteus medius depth, had similar R2 values when predicting kilograms of product and percentages of product, suggesting that these alternative variables explained little additional variation. Final unshrunk weight and ultrasound 12th-rib fat thickness explained most of the variation when predicting kilograms of fat. Rump fat and gluteus medius depth accounted for an additional 10% of the variation in kilograms of fat, compared with the equation containing final weight, ultrasound ribeye area, and ultrasound 12th-rib fat thickness; however, the two equations were not significantly different. Prediction equations for the cutability end points had similar R2 values whether live animal ultrasound measurements or actual carcass measurements were used. However, when ultrasound ribeye area was excluded from live animal predictions, lower R2 values were obtained for kilograms of product (0.81 vs 0.67) and percentages of product (0.41 vs 0.17). Conversely, the exclusion of ultrasound ribeye area had little effect on the prediction accuracy for kilograms of fat (0.75 vs 0.74) and percentage fat (0.50 vs 0.40). These data substantiate the ability of live animal ultrasound measures to accurately assess beef carcass composition and suggest that the alternative ultrasound measures, rump fat and gluteus medius depth, improve the accuracy of predicting fat-based carcass yields.  相似文献   

7.
Over the past 3 yr, 100 carcasses (64 steers, 24 bulls, and 12 heifers) were fabricated into closely trimmed (6 mm maximum fat cover), boxed beef and further evaluated for percentage of retail yield at the Iowa State University Meat Laboratory. Hot carcass weight ranged from 235 to 399 kg with a least squares mean (LSM) and standard error across all sex classes of 318 +/- 3 kg. Additionally, fat cover ranged from .30 to 1.78 cm with an average of .91 +/- .05 cm. The LSM for longissimus muscle area (LMA) across all sex classes was 81.6 +/- 1.0 cm2. Bulls had significantly less subcutaneous fat (P less than .01) and greater LMA (P less than .01) than did either steers or heifers. Retail yield from the boxed chuck, expressed as a percentage of cold carcass weight, was 19.2 for bulls and 14.8 for steers. This difference was due primarily to a reduction of intermuscular fat. Similarly, bulls had a greater yield (P less than .01) of the boxed round than did steers. When cattle of differing frame sizes were compared, only percentage of retail yield of the boxed round was significant (P less than .01): large-framed cattle yielded 14.3 +/- .2%, compared with 12.8 +/- .2% for the small-framed cattle. When all possible regression analyses were run, sex class differences accounted for 25.7% of the variation in retail yield. The current USDA retail yield equation accounted for only 37.2% of the variation. Percentage of closely trimmed, boneless round had an R2-value of .57.(ABSTRACT TRUNCATED AT 250 WORDS)  相似文献   

8.
Twenty Rambouillet wether lambs were given ad libitum access to a diet with (BAA, n = 10) or without (control, n = 10) 1 ppm of the beta-adrenergic agonist L644,969. Lambs were fed to a constant slaughter weight end point of 54.5 kg. Carcasses were fabricated to yield bone-in and boneless cuts that were trimmed progressively to 1.27, .64, .32, and .00 cm of s.c. fat remaining. Addition of BAA did not affect growth traits. Actual and adjusted fat thickness, body wall thickness, and percentage of kidney-pelvic fat did not differ between control and BAA lambs. However, BAA increased longissimus muscle area, longissimus muscle depth, and leg score while decreasing USDA yield grade. The BAA increased carcass conformation scores and decreased flank lean color scores. No other carcass quality measurements were affected by BAA. Addition of BAA did not affect overall carcass yields of bone-in retail cuts. However, BAA increased overall carcass yields of boneless retail cuts regardless of fat trim level. The BAA increased bone-in leg yield. Yield of boneless sirloin, bone-in loin and boneless loin were not affected by BAA. For these cuts, the percentage change from the control was highly dependent on fat trim level. There was no difference in short-cut, shank-off, semiboneless leg yield between control and BAA. Addition of BAA did not affect yield of bone-in rack regardless of fat trim level. However, BAA greatly increased yield of boneless ribeye. The BAA did not affect yield of bone-in or boneless shoulder.(ABSTRACT TRUNCATED AT 250 WORDS)  相似文献   

9.
Three experienced persons evaluated 158 carcasses 24 h postmortem for USDA yield grade (YG) and quality grade factors, nine subcutaneous (SC) fat indicators, and four intermuscular (IM) fat indicators. Forty sides (YG 1.1 to 3.8) were selected for determination of chemical composition, two measures of cutability, and total IM fat from the round, loin, rib, and chuck. The IM fat estimates at the 12th rib, rib-plate juncture, and 5th rib were correlated with percentage of chemical fat (r = -.72, -.70, and -.55, respectively). Simultaneous consideration of YG factors accounted for 61% of the variation in chemical fat. Substituting the IM fat estimate at the 12th rib for adjusted fat thickness (AFT) in the equation explained 60% of the variation in percentage of chemical fat. An equation containing two IM fat estimates, marbling score and longissimus muscle area explained 68% of the variation in chemical fat. Simultaneous consideration of the YG factors accounted for 59% of the variation in boneless, closely trimmed (6 mm SC fat and no IM fat) retail cuts from the round, loin, rib, and chuck. Substituting the IM fat estimate at the 12th rib for AFT in the equation accounted for 65% of the variation. These data from a fairly uniform set of steer carcasses show that percentage of chemical fat and cutability can be reliably predicted from IM fat estimates and other traits that can be visually estimated on hot-fat trimmed carcasses.  相似文献   

10.
An objective method for predicting red meat yield in lamb carcasses is needed to accurately assess true carcass value. This study was performed to evaluate the ability of the lamb vision system (LVS; Research Management Systems USA, Fort Collins, CO) to predict fabrication yields of lamb carcasses. Lamb carcasses (n = 246) were evaluated using LVS and hot carcass weight (HCW), as well as by USDA expert and on-line graders, before fabrication of carcass sides to either bone-in or boneless cuts. On-line whole number, expert whole-number, and expert nearest-tenth USDA yield grades and LVS + HCW estimates accounted for 53, 52, 58, and 60%, respectively, of the observed variability in boneless, saleable meat yields, and accounted for 56, 57, 62, and 62%, respectively, of the variation in bone-in, saleable meat yields. The LVS + HCW system predicted 77, 65, 70, and 87% of the variation in weights of boneless shoulders, racks, loins, and legs, respectively, and 85, 72, 75, and 86% of the variation in weights of bone-in shoulders, racks, loins, and legs, respectively. Addition of longissimus muscle area (REA), adjusted fat thickness (AFT), or both REA and AFT to LVS + HCW models resulted in improved prediction of boneless saleable meat yields by 5, 3, and 5 percentage points, respectively. Bone-in, saleable meat yield estimations were improved in predictive accuracy by 7.7, 6.6, and 10.1 percentage points, and in precision, when REA alone, AFT alone, or both REA and AFT, respectively, were added to the LVS + HCW output models. Use of LVS + HCW to predict boneless red meat yields of lamb carcasses was more accurate than use of current on-line whole-number, expert whole-number, or expert nearest-tenth USDA yield grades. Thus, LVS + HCW output, when used alone or in combination with AFT and/or REA, improved on-line estimation of boneless cut yields from lamb carcasses. The ability of LVS + HCW to predict yields of wholesale cuts suggests that LVS could be used as an objective means for pricing carcasses in a value-based marketing system.  相似文献   

11.
Lamb carcass (n = 100) were selected from USDA yield grades (YG) 2, 3, and 4 and carcass weight (CW) groups 20.4 to 24.9, 25.0 to 29.5, and 29.6 to 34.0 kg. Lamb carcass were fabricated into semiboneless and boneless subprimals and trimmed to three s.c. fat trim levels: .64, .25, and .00 cm of fat remaining. Innovative subprimals were fabricated and yields were calculated for the subprimals and dissectible components (lean, bone, connective tissue, external fat, and seam fat) from each of the various subprimals. Carcass weight as a main effect in a two-way analysis of variance did not account for a significant amount of the variation in yield among trimmed subprimals or the percentage of the dissectible components, but USDA YG was a significant main effect in determining variation in yield for many of the subprimals or dissectible components. Muscle seaming of shoulders and legs and removal of excessive tails on the loin and rack resulted in a majority of the seam fat being removed from these cuts. Dissection data clearly showed that seam fat is a major component of rack and shoulder cuts and with increasing fatness or higher numerical yield grade there are clearly increased amounts of this depot. Increased trimming of external fat magnifies and draws more attention to the amount of seam fat remaining. Production of heavy, lean lambs would be more useful in an innovative type of program because of the larger-sized muscles. Heavy, fat lambs would not be as useful because of their decreased yields and excess seam fat located in cuts that cannot be muscled-seamed because of the loss of retail cut integrity. Seam fat was highly correlated to percentage of kidney and pelvic fat and to external fat thickness and with USDA yield grade but was not strongly correlated to carcass weight.  相似文献   

12.
Commercial slaughter steers (n = 329) and heifers (n = 335) were selected to vary in slaughter frame size and muscle thickness score, as well as adjusted 12th rib fat thickness. After USDA carcass grade data collection, one side of each carcass was fabricated into boneless primals/subprimals and minor tissue components. Cuts were trimmed to 2.54, 1.27, and .64 cm of external fat, except for the bottom sirloin butt, tritip, and tenderloin, which were trimmed of all fat. Four-variable regression equations were used to predict the percentage (chilled carcass weight basis) yield of boneless subprimals at different fat trim levels (.64, 1.27, and 2.54 cm) as influenced by sex class, frame size, muscle score, and adjusted 12th rib fat thickness. Carcass component values, total carcass value, carcass value per 45.36 kg of carcass weight, and live value per 45.36 kg of live weight were calculated for each phenotypic group and external fat trim level. Carcass fatness and muscle score had the most influence on live and carcass value (per 45.36 kg weight basis). Carcasses with .75 and 1.50 cm of fat at the 12th rib were more valuable as the trim level changed from 2.54 cm to .64 cm; however, for carcasses with 2.25 cm of fat at the 12th rib, value was highest at the 2.54 cm trim level. Value was maximized when leaner cattle were closely trimmed. There was no economic incentive for trimming light-muscled or excessively fat carcasses to .64 cm of external fat.  相似文献   

13.
One hundred beef carcasses were selected to represent the mix of cattle slaughtered across the United States. Selection criteria included breed type (60% British/continental European, 20% Bos indicus, and 20% dairy carcasses), sex class (beef and Bos indicus: 67% steers, 33% heifers; dairy: 100% steers), USDA quality grade (4% Prime, 53% Choice, and 43% Select), USDA yield grade (10% YG 1, 43% YG 2, 40% YG 3, and 7% YG 4), and carcass weight (steers: 272.2 to 385.6 kg, heifers: 226.8 to 340.2 kg). One side of each carcass was fabricated into boneless subprimals and minor cuts following Institutional Meat Purchase Specifications. After fabrication, subprimals were trimmed progressively of fat in .64-cm increments beginning with a maximum of 2.54 cm and ending with .64 cm. Linear regression models were developed for each individual cut, including fabrication byproduct items (bone, fat trim) to estimate the percentage yield of those cuts reported by USDA Market News. Strip loin, top sirloin butt, and gooseneck rounds from heifers tended to have a higher percentage yield at the same USDA yield grade than the same cuts from steers, possibly resulting from increased fat deposition on heifers. Percentage of fat trimmed from dairy steers was 2 to 3% lower than that from other sex-class/carcass types; however, due to increased percentage of bone and less muscle, dairy steers were lower-yielding. Fat trimmed from carcasses ranged from 7.9 to 15.6% as the maximum trim level decreased from 2.54 to .64 cm.  相似文献   

14.
The most widely used system to predict percentage of retail product from the four primal cuts of beef is USDA yield grade. The purpose of this study was to determine whether routine ultrasound measurements and additional rump measurements could be used in place of the carcass measurements used in the USDA yield grade equation to more accurately predict the percentage of saleable product from the four primals. This study used market cattle (n = 466) consisting of Angus bulls, Angus steers, and crossbred steers. Live animal ultrasound measures collected within 7 d of slaughter were 1) scan weight (SCANWT); 2) 12th- to 13th-rib s.c. fat thickness (UFAT); 3) 12th- to 13th-rib LM area (ULMA); 4) s.c. fat thickness over the termination of the biceps femoris in the rump (URFAT; reference point); 5) depth of gluteus medius under the reference point (URDEPTH); and 6) area of gluteus medius anterior to the reference point (URAREA). Traditional carcass measures collected included 1) HCW; 2) 12th-to 13th-rib s.c. fat thickness (CFAT); 3) 12th- to 13th-rib LM area (CLMA); and 4) estimated percentage of kidney, pelvic, and heart fat (CKPH). Right sides of carcasses were fabricated into subprimal cuts, lean trim, fat, and bone. Weights of each component were recorded, and percentage of retail product from the four primals was expressed as a percentage of side weight. A stepwise regression was performed using data from cattle (n = 328) to develop models to predict percentage of retail product from the four primals based on carcass measures or ultrasound measures, and comparisons were made between the models. The most accurate carcass prediction equation included CFAT, CKPH, and CLMA (R2 = 0.308), whereas the most accurate live prediction equation included UFAT, ULMA, SCANWT, and URAREA (R2 = 0.454). When these equations were applied to a validation set of cattle (n = 138), the carcass equation showed R2 = 0.350, whereas the ultrasound data showed R2 = 0.460. Ultrasound measures in the live animal were potentially more accurate predictors of retail product than measures collected on the carcass.  相似文献   

15.
Cut-out data from 2,550 steer carcasses representing British, Continental and Zebu breeding were analyzed to evaluate yield grade classes based on three equations: 1) Ya = 2.5 + .984 AFT + .0084 HCW - .05 REA + .2 KPF; 2) Yb = same as Ya with intercept changed to 3.2 and KPF deleted; 3) Yc = 3.0 + .984 AFT + .0041 HCW - .03 REA, as proposed by USDA in 1984; where AFT = adjusted fat thickness (cm), HCW = hot carcass weight (kg), REA = rib-eye area (cm2), and KPF = kidney and pelvic fat (%). Essentially boneless, closely trimmed (8 mm) roasts and steaks of the four major retail cuts (MRC) were made from one side of each carcass. Cutability was calculated as: Ca, % = 100 (MRC/side) and Cb,c % = 100 (MRC/side, KPF removed). Cutability increased (P less than .01) an average of two percentage points when KPF was removed. In general, removing KPF from the estimation of cutability and changing the coefficients for REA and HCW resulted in a decrease in the number of carcasses yield graded 1 or 4 and an increase in the number of carcasses in yield grade 2. Redistribution of carcasses was greater for Yc than for Yb. Carcasses classified with equation Yc tended (P greater than .05) to have greater cutability in yield grades 1 and 2, and lower (P less than .01) cutability in yield grades 3, 4 and 5.(ABSTRACT TRUNCATED AT 250 WORDS)  相似文献   

16.
We evaluated 20 slaughtered cattle with ultrasound before hide removal to predict fat thickness and ribeye area at the 12th rib for possible use in carcass composition prediction. Carcasses were fabricated into boneless subprimals that were trimmed progressively from 2.54 to 1.27 to .64 cm maximum fat trim levels. Stepwise regression was used to indicate the relative importance of variables in a model designed to estimate the percentage of boneless subprimals from the carcass at different external fat trim levels. Variables included those obtained on the slaughter floor (ultrasound fat thickness and ribeye area; estimated percentage of kidney, pelvic, and heart [KPH] fat; and warm carcass weight) and those obtained from carcasses following 24 h in the chill cooler (actual fat thickness, actual ribeye area, estimated percentage of KPH fat, warm carcass weight, and marbling score). At all different subprimal trim levels, percentage KPH was the first variable to enter the model. In the models using measures taken on the slaughter floor, ultrasound fat thickness was the only other variable to enter the model. Ultrasound fat thickness increased R2 and decreased residual standard deviation (RSD) in models predicting subprimals at 2.54-cm maximum fat trim; however, at 1.27- and .64-cm trim levels, R2 and RSD increased. Models using the same two variables (except actual fat instead of ultrasound) in the cooler were similar to those using data from the slaughter floor. However, as more cooler measurement variables entered the models, R2 increased and RSD decreased, explaining a greater amount of the variation in the equation. Ultrasonic evaluation on the slaughter floor may be of limited application compared with the greater accuracy found in chilled carcass assessment.  相似文献   

17.
Feedlot and carcass characteristics of 276 steers from five closed lines of Hereford cattle and reciprocal crosses among these lines were studied. The traits studied were initial weight, final weight, 224-d gain, days on test, hot carcass weight, marbling score, longissimus muscle area, fat thickness, yield grade, dressing percentage and shear force. Year of record was a significant source of variation for most traits. Age of dam was a significant source of variation for growth traits but not carcass traits. Line of sire affected initial weight, final weight, 224-d gain, days on test, marbling score and dressing percentage. Significant heterosis was observed only for hot carcass weight. Heterosis estimates were 1.9% for initial weight, 2.2% for final weight, 2.5% for 224-d gain, -2.1% for days on test, .6% for hot carcass weight, -.6% for marbling score, 0 for carcass grade, .6% for longissimus muscle area, 2.3% for backfat thickness, .9% for yield grade, -.9% for dressing percent and -10.9% for shear force. Initial age on test affected only hot carcass weight. Hot carcass weight, dressing percentage, marbling score, longissimus muscle area and fat thickness were affected by slaughter weight. Slaughter age affected dressing percent and marbling score.  相似文献   

18.
Angus steers of known age (265 +/- 17 d) and parentage were used in a 2-yr study (yr 1, n = 40; yr 2, n = 45) to evaluate the relationship between percentage of i.m. fat content of the longissimus dorsi at the 12th rib and carcass characteristics during growth of nonimplanted steers. Steers were sorted by age and EPD of paternal grandsire for marbling into high- and low-marbling groups so that steers with varying degrees of genetic potential for marbling were evenly distributed across slaughter groups. All steers were fed a 90% concentrate corn-based diet. Steers were allotted to five slaughter groups targeted to achieve hot carcass weights (HCW) of 204, 250, 295, 340, and 386 kg over the course of the feeding period. Data were analyzed as a completely random design with a factorial arrangement of treatments (year, marbling group, and slaughter group). Marbling group did not affect backfat, LM area, yield grade (YG), or marbling score. Regression equations were developed to quantify the change in carcass characteristics and composition over slaughter groups. Hot carcass weight increased in a linear fashion and differed (P < 0.01) among the slaughter groups as anticipated by design. Yield grade followed a quadratic upward pattern (P < 0.01) as HCW increased. Slaughter group affected the degree of marbling linearly (P < 0.01). There were no slaughter group x marbling group interactions, indicating that no differences occurred in the pattern of marbling attributable to paternal grandsire EPD. Carcasses expressed small degrees of marbling at 266 kg of HCW and obtained a YG of 3.0 at 291 kg of HCW. Fractional growth rates decelerated with increasing HCW. Greater advances in marbling relative to total carcass fatness occurred at HCW less than 300 kg. Management practices early in growth may influence final quality grade if compensatory i.m. fat content development does not occur.  相似文献   

19.
Live animal and carcass data were collected from market barrows and gilts (n = 120) slaughtered at a regional commercial slaughter facility to develop and test prediction equations to estimate carcass composition from live animal and carcass ultrasonic measurements. Data from 60 animals were used to develop these equations. Best results were obtained in predicting weight and percentage of boneless cuts (ham, loin, and shoulder) and less accuracy was obtained for predicting weight and ratio of trimmed, bone-in cuts. Independent variables analyzed for the live models were live weight, sex, ultrasonic fat at first rib, last rib, and last lumbar vertebra, and muscle depth at last rib. Independent variables for the carcass models included hot carcass weight, sex of carcass, and carcass ultrasonic measurements for fat at the first rib, last rib, last lumbar vertebra, and muscle depth at last rib. Equations were tested against an independent set of experimental animals (n = 60). Equations for predicting weight of lean cuts, boneless lean cuts, fat-standardized lean, and percentage of fat-standardized lean were most accurate from both live animal and carcass measurements with R2 values between .75 and .88. The results from this study, under commercial conditions, suggest that although live animal or carcass weight and sex were the greatest contributors to variation in carcass composition, ultrasonography can be a noninvasive means of differentiating value, especially for fat-standardized lean and weight of boneless cuts.  相似文献   

20.
Mature beef cows (n = 83) were slaughtered to measure the influence of body condition score (BCS) on carcass characteristics and subprimal yields. All cows were weighed and assigned BCS, based on a 9-point scale, 24 h before slaughter. Cows were slaughtered, and, after a 48-h chilling period, quality and yield grade data were collected on the left side of each carcass. The right side was quartered, fabricated into primal cuts, and weighed. Each primal cut was further processed into boneless subprimal cuts, minor cuts, lean trim, fat, and bone. Cuts were progressively trimmed to 6.4 and 0 mm of external and visible seam fat. Weights were recorded at all stages of fabrication, and subprimal yields were calculated as a percentage of the chilled carcass weight. Live weight, carcass weight, dressing percentage, fat thickness, longissimus muscle area, muscle:bone ratio, and numerical yield grade increased linearly (P = .0001) and predicted cutability and actual muscle-to-fat ratio decreased linearly (P = .0001) as BCS increased from 2 to 8. Carcasses from BCS-8 cows had the most (P<.05) marbling. The percentage of carcasses grading U.S. Utility, or higher, was 16.7, 20.0, 63.6, 43.3, 73.3, 100.0, and 100.0% for cows assigned a BCS of 2, 3, 4, 5, 6, 7, and 8, respectively. At 6.4 mm of fat trim, carcasses from BCS-5 cows had higher (P<.05) shoulder clod yields than carcasses from cows having a BCS of 6, 7, and 8. Carcasses of BCS-2 cows had lower (P<.05) strip loin yields than carcasses from BCS-3, 4, 5, 6, and 7 cows. Top sirloin butt yields were higher (P<.05) for carcasses of BCS-2, 3, 4, and 5 cows than those of BCS-6, 7, or 8 cows. Carcasses from BCS-7 and 8 cows had lower (P<.05) tenderloin and inside round yields than carcasses of BCS-5, or less, cows. At both fat-trim levels, carcasses from BCS-5 cows had higher (P<.05) eye of round yields than cows assigned BCS of 2, 7, or 8. When subprimal cuts were trimmed to 6.4 mm of visible fat, carcasses from BCS-5 cows had higher (P<.05) total lean product yields than cows assigned a BCS of 2, 4, 7, and 8. Regardless of fat trim, total fat yields increased (P = .0001) and total bone yields decreased (P = .0001) linearly as BCS increased from 2 to 8. Although carcasses from BCS-5 and 6 cows had the highest yields of lean product, cattle producers and packers may benefit most by marketing and(or) purchasing BCS-6 cows because a higher percentage of their carcasses had quality characteristics deemed desirable for fabrication into boneless subprimal cuts.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号