Potential potassium buffer capacity of Kamchatka volcanic soils     

E. A. Zharikova 《Eurasian Soil Science》2011,44(5):493-499

The volcanic soils of Kamchatka are characterized by low and very low values of their potential potassium buffer capacity. The largest amount of readily exchangeable potassium (-ΔK ₀) is observed in the surface layers of the natural soils and is due to the active biogenic accumulation. The soddy horizons have a high content of strongly fixed potassium (K _X ). The main factors determining the content of the labile potassium and its mobility are the contents of physical clay, humus, and exchangeable potassium. The extremely nonuniform distribution of all the potassium status parameters throughout the soil profile reflects the discrete character of the volcanic pedogenesis. The low values of the potential buffer capacity for the potassium (PBC^K) at the high values of the equilibrium potassium potential (AR ₀) and the medium content of the labile potassium in the light-textured synlithogenic soils simultaneously indicate both the good potassium supply of the plants and the incapability of the soils to resist potassium exhaustion under agricultural production conditions for a long time.  相似文献   

Skull size and shape variation in Psammomys spp. (Rodentia,Gerbillinae) from Tunisia,with emphasis on the impact of allometric variation on species recognition     

Hanene Khemiri  Paolo Colangelo  M’barek Chétoui  Saïd Nouira 《African Zoology》2016,51(3):145-152

In Tunisia both Psammomys obesus and P. vexillaris are found. These taxa have been the subject of taxonomic controversy for some time, due to variability in the classical morphological characters used for taxonomic recognition. In this study we investigated skull size and shape variation in the genus Psammomys by using geometric morphometrics to evaluate the extent of intra- and interspecific shape variation and explicitly tested for the impact of allometric shape variation on species discrimination. Eleven populations of the two species from 10 localities in Tunisia were studied. Statistical analyses of size and shape showed large size variation within P. obesus, but no shape differences were revealed among populations of this species. Interspecific analysis revealed that P. vexillaris had the smallest skull. Principal component analysis and Procrustes distances showed good discrimination between the two species after removal of the allometric component of shape variation. The results obtained show that allometric-related shape variation could mask discrimination between the two Psammomys species. This finding might explain the uncertainty in classification of these species in the past. The interspecific allometric-free phenotypic differences observed may be associated with adaptive processes linked to the different environmental and trophic preferences of the two species.  相似文献   

Tenogenic induction of equine mesenchymal stem cells by means of growth factors and low-level laser technology     

Chiara Gomiero  Giulia Bertolutti  Tiziana Martinello  Nathalie Van Bruaene  Sarah Y. Broeckx  Marco Patruno  Jan H. Spaas 《Veterinary research communications》2016,40(1):39-48

Tendons regenerate poorly due to a dense extracellular matrix and low cellularity. Cellular therapies aim to improve tendon repair using mesenchymal stem cells and tenocytes; however, a current limitation is the low proliferative potential of tenocytes in cases of severe trauma. The purpose of this study was to develop a method useful in veterinary medicine to improve the differentiation of Peripheral Blood equine mesenchymal stem cells (PB-MSCs) into tenocytes. PB-MSCs were used to study the effects of the addition of some growth factors (GFs) as TGFβ3 (transforming growth factor), EGF2 (Epidermal growth factor), bFGF2 (Fibroblast growth factor) and IGF-1 (insulin-like growth factor) in presence or without Low Level Laser Technology (LLLT) on the mRNA expression levels of genes important in the tenogenic induction as Early Growth Response Protein-1 (EGR1), Tenascin (TNC) and Decorin (DCN). The singular addition of GFs did not show any influence on the mRNA expression of tenogenic genes whereas the specific combinations that arrested cell proliferation in favour of differentiation were the following: bFGF2 + TGFβ3 and bFGF2 + TGFβ3 + LLLT. Indeed, the supplement of bFGF2 and TGFβ3 significantly upregulated the expression of Early Growth Response Protein-1 and Decorin, while the use of LLLT induced a significant increase of Tenascin C levels. In conclusion, the present study might furnish significant suggestions for developing an efficient approach for tenocyte induction since the external administration of bFGF2 and TGFβ3, along with LLLT, influences the differentiation of PB-MSCs towards the tenogenic fate.  相似文献   

Immunological and pathological investigations in equine experimental uveitis     

Galina P. Simeonova  Svetozar Z. Krastev  Radostin S. Simeonov 《Veterinary research communications》2016,40(3-4):107-115

  相似文献   

Organic and mechanical properties of Cervidae antlers: a review     

P. P. Picavet  M. Balligand 《Veterinary research communications》2016,40(3-4):141-147

There is a resurgence of interest in the study of deer antlers. Recent research advocates their potential for use in bone xenografts. Using this working hypothesis, we can formulate many questions: do antlers really present unique or interesting mechanical properties, and if so, which factors affect these properties? Many other issues, including tissue compatibility, could be discussed; however, this article will focus on the biomechanical features of antlers. This paper reviews some answers found within current published material, and could help determine the optimal selection of some antlers for further experimental studies and clinical trials. Some general elements like anatomy and histology of deer antlers are briefly summarised. This paper will attempt to define the fundamental differences between skeletal bone and antler bone in terms of their organic and mechanical properties. We will then compare the previously published data, which details the mechanical properties of antlers from different species of Cervidae, by reviewing several aspects such as: sex; geographical situation; morphology; hydration state; and mineral composition. Some findings emerge: mechanical properties do not vary with gender or latitude, and the most important determining factor appears to be the species, alongside morphology and use of antlers. The state of hydration and mineral composition also has an influence on the mechanical properties of Cervidae antlers.  相似文献   

Measured and estimated water use and crop coefficients of grapevines trained to overhead trellis systems in California’s San Joaquin Valley     

Larry E. Williams  Matthew W. Fidelibus 《Irrigation Science》2016,34(6):431-441

The use of overhead trellis systems for the production of dry-on-vine (DOV) raisins and table grapes in California is expanding. Studies were conducted from 2006 to 2009 using Thompson Seedless grapevines grown in a weighing lysimeter trained to an overhead arbor trellis and farmed as DOV raisins for the first two years and for use as table grapes thereafter. Maximum canopy coverage for the two lysimeter vines across years was in excess of 80 %. Seasonal (15 March–31 October) evapotranspiration for the lysimeter vines (ET_Lys) was 952 mm in 2007 (farmed as DOV raisins) and 943 and 952 mm (when farmed as table grapes). The maximum crop coefficient (K _cLys) across all 4 years ranged from 1.3 to 1.4. These maximum values were similar to those estimated using the relationship where K _c is a function of the amount of shaded area measured beneath the canopy at solar noon (K _c = 0.017 × percent shaded area). Covering the lysimeter’s soil surface with plastic (and then removing it) numerous times during the 2009 growing season (1 June–14 September) reduced ET_Lys from an average of 6.4 to 5.6 mm day^?1 and the K _c from 1.07 to 0.93. A seasonal basal K _c (K _cb) was calculated for grapevines using an overhead trellis system with a 13 % reduction in the K _cLys across the growing season.  相似文献   

Crop response of drought-tolerant and conventional maize hybrids in a semiarid environment     

Ryan B. Mounce  Susan A. O’Shaughnessy  Brock C. Blaser  Paul D. Colaizzi  Steven R. Evett 《Irrigation Science》2016,34(3):231-244

In the High Plains, corn (Zea mays L.) is an important commodity for livestock feed. However, limited water resources and drought conditions continue to hinder corn production. Drought-tolerant (DT) corn hybrids could help maintain high yields under water-limited conditions, though consistent response of such hybrids is unverified. In this two-year study, the effects of three irrigation treatments were investigated for a DT and conventional maize hybrid, Pioneer AQUAMax P0876HR and Pioneer 33Y75, respectively. In 2013, the drier of the 2 years, irrigation amounts and crop water use (ET_c) were greater for the conventional hybrid, but grain water use efficiency (WUE) and harvest index were significantly greater for the DT hybrid. In 2014, grain yields and WUE were not significantly different between hybrids. However, irrigation amounts, ET_c and biomass yields were greater for the conventional hybrid. Results from both years indicate that the DT hybrid required less water to maximize grain yield as compared to the conventional hybrid. Producing relatively high yields with reduced amounts of water may provide a means for producers to continue corn production in a semiarid environment with declining water supplies.  相似文献   

Water use estimates for various rice production systems in Mississippi and Arkansas     

M. C. Smith  J. H. Massey  J. Branson  J. W. Epting  D. Pennington  P. L. Tacker  J. Thomas  E. D. Vories  C. Wilson 《Irrigation Science》2007,25(2):141-147

Rice irrigation-water use was estimated in Mississippi (MS) and Arkansas (AR) in 2003 and 2004. Irrigation inputs were compared on naturally sloping (i.e. contour-levee system) and mechanically graded fields. In MS, rice production consumed, on average, 895 mm water, but irrigation inputs were greatly affected by production system. Contour-levee systems accounted for 35% of the production area and consumed 1,034 mm irrigation. Fields mechanically graded to a consistent slope of approximately 0.1% (i.e. straight-levee systems) consumed 856 mm irrigation and accounted for 60% of the production area. Fields devoid of slope (i.e. zero-grade system) accounted for 5% of the production area and consumed 382 mm irrigation. In AR, contour-levee rice production consumed 789 mm compared to 653 mm with a straight-levee system. Using low pressure, thin wall (9–10 mil) disposable irrigation tubing to deliver water to each paddy independently reduced irrigation inputs by 28% in MS and 11% in AR when compared to a single-point (levee-gate) distribution system.  相似文献   

Latent heat flux over Cabernet Sauvignon vineyard using the Shuttleworth and Wallace model     

S. Ortega-Farias  M. Carrasco  A. Olioso  C. Acevedo  C. Poblete 《Irrigation Science》2007,25(2):161-170

The Shuttleworth and Wallace model (SW) was evaluated to estimate latent heat flux above a drip-irrigated Cabernet Sauvignon vineyard, located in the Pencahue Valley, Region del Maule, Chile (35°22′ LS; 71°47′ LW; 150 m above sea level). The performance of the WS model (LE_ws) was evaluated against the eddy-covariance method (LE_ed) on a 30 min time interval. Results indicate that the root mean square error (RMSE) and mean absolute error (MAE) were 29 W m⁻² and 22 W m⁻², respectively. For the vine evapotranspiration (ETv), RMSE was 0.42 mm day⁻¹ and MAE was 0.36 mm day⁻¹. The largest disagreements between LE_ed and LE_ws were observed under dry atmospheric conditions. Also, the sensitivity analysis indicates that predicted ETv by the SW model was sensitive to errors of ±30% in leaf area index and mean stomatal resistance, but it was not affected by errors in the estimation of aerodynamic resistances.  相似文献   

Comparisons of two soil water flow models under variable irrigation     

K. O. Adekalu  H. O. Fapohunda 《Irrigation Science》2007,25(4):375-385

Performance of WATCOM (a numerical model) and CRPSM (a simple water balance model) were assessed in simulating root zone water storage and water balance components under cowpea in Nigeria using a line source sprinkler system. Three sets of field data were collected: the first was used for calibration and model parameters’ estimation and the other two for testing and comparisons. The simulated soil water storage and crop evapotranspiration with WATCOM and CRPSM were in good agreement with field-measured data though WATCOM performed significantly better (P < 0.05) under the stressed condition. The maximum average error between predicted and measured soil water storage was −0.95 and +1.47 mm for WATCOM and CRPSM, respectively, while that between measured and predicted actual crop evapotranspiration was +2.7 and +11.38 mm, respectively, for the two models. WATCOM gave generally higher cumulative deep percolation and lower evapotranspiration than that of CRPSM for all irrigation levels (P < 0.05), and values of deep percolation for WATCOM were in better agreement with field data than that of CRPSM. This suggests that drainage below the field capacity needs to be included in CRPSM and that WATCOM will be a more useful management tool when detailed soil parameter is required and under variable water regime.  相似文献