Leaf-fall phenology along a topography-mediated environmental gradient in a cool–temperate deciduous broad-leaved forest in Japan     

Ryunosuke Tateno  Takanobu Aikawa  Hiroshi Takeda 《Journal of Forest Research》2005,10(4):269-274

Leaf-fall phenology was studied in a cool–temperate deciduous broad-leaved forest in central Japan in relation to the topographic environmental gradients that occur along a short mountain slope. Leaf-fall phenology was described quantitatively using data from leaf litter collected along the slope. In autumn, leaf fall at the study site tended to occur slightly earlier on the upper slope than on the lower slope. This pattern was found at both the stand and the species levels. Our results suggest that leaf-fall phenology may be affected by difference in microclimatic conditions, because environmental conditions are thought to be more severe on the upper slope than on the lower slope. The less intensive methods used in this study, the litter trap method, and Dixon’s model succeeded in quantifying the phenological patterns of leaf fall within stands and within species along the short mountain slope.  相似文献   

Accuracy of shear properties of wood obtained by simplified Iosipescu shear test     

Yoshitaka Kubojima  Hiroshi Yoshihara  Hisashi Ohsaki  Masamitsu Ohta 《Journal of Wood Science》2000,46(4):279-283

We examined the accuracy of the shear properties of wood by the Iosipescu shear test using specimens whose shape was simplified. Quartersawn boards of sitka spruce (Picea sitchensis Carr.) and shioji (Japanese ash,Fraxinus spaethiana Lingelsh.) were used. Two types of specimen for the Iosipescu shear test were compared: a standard specimen whose notch angle is 90° and a keyhole type specimen, which is more easily prepared than the standard type. The shear modulus, yield shear stress, and failure shear stress of the keyhole-type specimen were compared to those of the standard specimen. Shear stress analysis was conducted using the finite element method (FEM). The results obtained were as follows: (1) The failure pattern obtained by the simplified Iosipescu shear test was similar to that seen with the standard Iosipescu shear test. (2) The shear modulus, yield stress, and failure stress obtained by the simplified Iosipescu shear test coincided with those by the standard Iosipescu shear test. (3) The principal strain angle and principal stress angle of the simplified Iosipescu shear test were about 45°. (4) It is recognized that pure stress is applied to the strain-gauge regions in the simplified Iosipescu shear test, and it is expected that the shear properties are independent of the notch angle.  相似文献   

Energy and carbon dioxide (CO2) balance of logging residues as alternative energy resources: system analysis based on the method of a life cycle inventory (LCI) analysis   总被引：1，自引：0，他引：1  

Takuyuki Yoshioka  Kazuhiro Aruga  Toshio Nitami  Hiroshi Kobayashi  Hideo Sakai 《Journal of Forest Research》2005,10(2):125-134

Using the method of a life cycle inventory (LCI) analysis, the energy balance and the carbon dioxide (CO₂) emission of logging residues from Japanese conventional forestry as alternative energy resources were analyzed over the entire life cycle of the residues. The fuel consumption for forestry machines was measured in field experiments for harvesting and transporting logging residues at forestry operating sites in Japan. In addition, a total audit of energy consumption was undertaken. It involved an assessment of materials, construction, and the repair and maintenance of forestry machines as well as the costs associated with an energy-conversion plant. As a result, the ratio of energy output to input was calculated to be 5.69, indicating that the system examined in this study could be feasible as an energy production system. The CO₂ emission per MWh_e (e: electricity) of the biomass-fired power generation plant was calculated to be 61.8kgCO₂/MWh_e, while that of coal-fired power generation plants in Japan is 960kgCO₂/MWh_e. Therefore, the reduction in the amount of CO₂ emission that would result from replacing coal with biomass for power generation by as much as 3.0 million dry-t/year of logging residues in Japan was estimated to be 1.66 million tCO₂/year, corresponding to 0.142% of the national CO₂ emission. This study provides evidence that Japan could reduce its domestic CO₂ emission by using logging residues as alternative energy resources.  相似文献   

Assignment of the 1H and 13C NMR spectra of 2-aminobenzamide-labeled galacto- and arabinooligosaccharides     

Tadashi Ishii  Hiroshi Ono  Ikuko Maeda 《Journal of Wood Science》2005,51(3):295-302

1,4-Linked β-d-galactooligosaccharides with a degree of polymerization (DP) between 1 and 7 and 1,5-linked α-l-arabinooligosaccharides with a DP between 1 and 8 were labeled at their reducing ends with 2-aminobenzamide (2AB) in the presence of sodium cyanoborohydride. The 2AB-labeled oligosaccharides were shown to be homogeneous using high-performance anion-exchange chromatography (HPAEC) and by electrospray ionization mass spectrometry (ESI-MS). The signals in the ¹H and ¹³C nuclear magnetic resonance (NMR) spectra of the 2AB-labeled oligosaccharides were then assigned using one- and two-dimensional NMR spectroscopy. These NMR data will be useful for the structural analysis of enzymatically synthesized galactan and arabinan side chains derived from rhamnogalacturonan I.  相似文献   

Safety of the tram car for slopes examined by stress analysis of the ground structure     

Masaki Jinkawa  Hirokazu Yamaguchi  Kuniaki Furukawa  Toshiaki Satake  Hiroshi Kobayashi 《Journal of Forest Research》2006,11(2):77-88

For monorail systems, it is very important to ensure the safety of the ground structure. We developed a tram car for slopes that utilizes the mechanism of the monorail and analyzed the stress of the ground structure that had double rails. First, we divided the ground structure into seven components, and formulated a procedure for calculating the stress of the ground structure. As a result, the stress that acts upon the main rail and the main rail connecting part was near the allowable stress, and each calculated value was within the allowable stress. We measured the stress by running the vehicle, and compared the measured values with the calculated values. As a result, some measured values were larger than the calculated values. However, the ratio of measured value to allowable stress was 90% or less. Finally, we calculated the static loading coefficient for each part, results of which were as follows: main and subrail: 1.1; rail connection part and prop foundation part: 1.0; rail installation part: 1.3. In the recalculations, it became clear that the recalculated values exceeded the allowable stresses. These results suggest that we need to review the ground structure materials.  相似文献   

Life cycles of individual roots in fine root system of Chamaecyparis obtusa Sieb. et Zucc.     

Takuo Hishi  Hiroshi Takeda 《Journal of Forest Research》2005,10(3):181-187

Recent studies have remarked on differences in the life cycles of individual fine roots. However, the dynamics of individual roots with different life cycles, such as ephemeral and perennial, during root system development are still unknown. We examined individual roots during fine root system development in a mature stand of Chamaecyparis obtusa Sieb. et Zucc. (Cupressaceae) using the sequential ingrowth core method and an anatomical method. The visual classification, i.e., orange, red, brown, intact dead, and fragmented dead, of fine roots corresponded well with the anatomical classification. Orange and red roots contained passage cells, and brown roots contained cork cambium. The proportions of protoxylem groups differed among visual classes. Brown secondary roots were mainly triarch (43%) and tetrarch (40%) and rarely diarch (12%), whereas fragmented dead roots, which constituted more than 95% of the dead roots, were mainly diarch (67%). These results imply that triarch and tetrarch roots tend to form secondary roots, whereas diarch roots tend to become dead roots without secondary growth. Using the numbers of root tips and clusters, root system development could be classified into three stages: colonization, branching within the root system, and maintenance. During the colonization stage, mainly triarch and tetrarch roots, which tend to be secondary growth, invaded ingrowth cores. During the branching stage, primarily diarch roots, which tend to be ephemeral, emerged. Fine root system development involved the recruitment of different individual roots during the life cycle depending on the growth stage.  相似文献   

Preparation of novel reagents 4-alkoxytrityl chlorides and their reaction with methyl Α-d-glucoside     

Ifuku  Shinsuke  Kamitakahara  Hiroshi  Nakatsubo  Fumiaki 《Journal of Wood Science》2004,50(3):248-252

A series of novel 4-O-alkoxytrityl chlorides (1) with different chain lengths was synthesized as a novel reagent for obtaining 6-O-alkylated cellulose with high regioselectivity via trityl groups in one reaction step without the use of any protective groups. These chlorides were reacted with methyl -d-glucoside, which was used as a model compound, to examine the reactivities toward the primary hydroxyl groups of cellulose to afford a series of 6-O-alkylated methyl -d-glucosides in high yields. The product compounds were found to have interesting solubilities and thermal properties. Thus, newly prepared trityl chloride derivatives were found to be useful regioselective derivatization reagents on the primary hydroxyl group in carbohydrates, especially in cellulose.  相似文献   

Effect of board density on bending properties and dimensional stabilities of MDF-reinforced corrugated particleboard     

Koji?HayashiEmail author  Masaharu?Ohmi  Hiroshi?Tominaga  Kiyoharu?Fukuda 《Journal of Wood Science》2003,49(5):398-404

We investigated the bending properties of composite boards produced by reinforcing both sides of corrugated particleboard with medium-density fiberboard (MDF). Thickness swelling and linear expansion (LE) were measured to assess the dimensional stabilities of the composite board. Although the apparent density of the composite board was 0.48g/cm³, its strength was found to be equivalent to that of 18-type particleboard as described in JIS A 5908. The boards parallel/perpendicular anisotropy in strength was 0.9. The modulus of rupture (MOR) of the composite board increased with board density only up to a certain density, beyond which the MOR was constant. On the other hand, the thickness swelling of both corrugated particleboard and the composite board was smaller than that of flat-type particleboard, satisfying the JIS A 5908 standard of 12%. Linear expansion (soaking in water of ordinary temperature for 24h) of corrugated particleboard was 0.7%–0.9% in the parallel direction and 2.1%–3.1% in the perpendicular direction; hence, anisotropy in linear expansion existed in the corrugated particleboard. The linear expansion of the composite board was 0.6%–0.9% in the parallel direction and 1.8%–2.5% in the perpendicular direction. Although the LE of the composite board was lower than that of corrugated particleboard, it is necessary to improve the LE of composite board for practical use.  相似文献   

Shear strengths of wood measured by various short beam shear test methods     

Hiroshi Yoshihara  Toshifumi Furushima 《Wood Science and Technology》2003,37(3-4):189-197

We conducted three types of short beam shear tests of western hemlock (Tsuga heterophylla Sarg.) under various span/depth ratios, and examined whether the maximum shear stress was used as the shear strength. The following results were obtained. (1) In the short beam shear tests under the three-point loading method, it was difficult to have the specimen failing by horizontal shear. We thought that this method should not be recommended for determining the shear strength of wood. (2) In the short beam shear tests under the asymmetric four-point loading of the specimen with a rectangular cross-section, the failure caused by horizontal shear occurred under some span/depth ratio range. Nevertheless, this range was dependent on the specimen geometry and was quite restricted. We therefore think that this method should not be recommended for determining the shear strength of wood. (3) In the short beam shear tests under the asymmetric four-point loading of the I-shaped specimen, failure caused by horizontal shear occurred under the span/depth ratio range wider than that applicable for the asymmetric four-point loading of the specimen with a rectangular cross-section. The maximum shear stress was stable in a certain span/depth ratio range and the value of the maximum shear stress is effective as a parameter for comparing the shearing strength of materials with each other.  相似文献   

Chemical analysis of the product in acid-catalyzed solvolysis of cellulose using polyethylene glycol and ethylene carbonate     

Tatsuhiko Yamada  Masako Aratani  Satoshi Kubo  Hirokuni Ono 《Journal of Wood Science》2007,53(6):487-493

Degradation and decomposition of cellulose were studied in an acid-catalyzed solvolysis treatment of biomass using polyethylene glycol (PEG) and ethylene carbonate (EC). The solvolysis reaction was followed by a typical reaction system of wood liquefaction that uses sulfuric acid catalyst at 140° or 150°C at atmospheric pressure. The methods of fractionation and chemical analysis of the degraded cellulose in the solvolyzed product are discussed. The solvolyzed product was separated into several fractions, and they were hydrolyzed to release glucose and levulinic acid to determine the quantity of glucosides and levulinates in the solvolysis product. The data clearly showed that the solvolysis reaction had the same mechanism when using PEG or EC. Degradation of cellulose leads to the formation of glucosides, which then decompose, resulting in a levulinic acid structure, and producing a water-insoluble fraction. The conversion rates of both glucosides and levulinates strongly depend on the reaction conditions of the solvolysis. In particular, EC promotes faster conversion of the reactions. The method discussed here is a chemical analytical technique for characterization of the products of wood liquefaction.  相似文献