Development of a joint system using a compressed wooden fastener I: evaluation of pull-out and rotation performance for a column—sill joint     

Kiho Jung  Akihisa Kitamori  Kohei Komatsu 《Journal of Wood Science》2009,55(4):273-282

Compressed wooden plates and dowels were used to connect members in post-and-beam structures as a substitute for a steel fastener. In order to take advantage of the characteristic properties of compressed wood and to achieve optimum joint performance, two compressed wooden plates were used in each joint to give multiple shear planes for each compressed wooden dowel. Consequently, this type of joint showed very good properties in pull-out and momen-trotation performance, and its engineering design could be further optimized. This joint is expected to be introduced to many kinds of structural systems, including long-span frame structures made of domestic timber found in Japanese residential houses.  相似文献   

Overwintering of <Emphasis Type="Italic">Taphrina wiesneri</Emphasis> within cherry shoots monitored with species-specific PCR     

Masabumi Komatsu  Machiko Taniguchi  Norihisa Matsushita  Yukiko Takahashi  Taizo Hogetsu 《Journal of General Plant Pathology》2010,76(6):363-369

Taphrina wiesneri, the pathogen of witches’ broom of cherry, is highly pathogenic to Cerasus × yedoensis, the most widely planted ornamental cherry species in Japan. For adequate control of this disease, it is necessary to understand the life history of T. wiesneri. However, sites inhabited by T. wiesneri within infected trees are little understood, except during flowering and leafing periods in spring. Therefore, we attempted to detect the location of T. wiesneri in shoots of witches’ broom before flowering and leafing in spring using PCR with a T. wiesneri-specific primer pair that was designed from 69 sequences in rDNA-internal transcribed spacer region of 32 Taphrina species. DNA extracted from symptomatic and asymptomatic C. × yedoensis sampled before leafing was amplified by PCR. T. wiesneri was detected in every bud and 5-mm stem segment of symptomatic shoots, except for one stem segment, and locally inside buds and the inner bark of stem segments. These results indicate that T. wiesneri overwinters inside symptomatic shoots. Fungal hyphae were observed with an epifluorescence microscope in intercellular spaces of young leaves in symptomatic buds but not in asymptomatic ones in thin sections stained with fluorescein-isothiocyanate-conjugated concanavalin A. This observation supports the results of PCR detection.  相似文献   

Azimuthal variations of sap flux density within Japanese cypress xylem trunks and their effects on tree transpiration estimates     

Kenji Tsuruta  Tomonori Kume  Hikaru Komatsu  Naoko Higashi  Toshihiro Umebayashi  Tomo’omi Kumagai  Kyoichi Otsuki 《Journal of Forest Research》2010,15(6):398-403

Sap flow techniques are practical tools for estimating tree transpiration. Though many previous studies using sap flow techniques did not consider azimuthal variations of sap flux density (F _d) on xylem trunk to estimate tree transpiration, a few studies reported that ignoring the azimuthal variations in F _d could cause large errors in tree transpiration estimates for some tree species. Therefore, examining azimuthal variations in F _d for major plantation tree species is critical for estimating tree transpiration. Using the thermal dissipation method, we examined azimuthal variations in F _d in six trees of Japanese cypress Chamaecyparis obtusa (Sieb. et Zucc.) Endl., which is one of the most common plantation tree species in Japan. We recorded considerable variations among F _d at four different azimuthal directions. The F _d value for one aspect was more than 100% larger than those for the other aspects. We calculated differences between tree transpiration estimates based on F _d for one to three azimuthal directions and those based on F _d for four aspects. The differences relative to tree transpiration estimates based on F _d for four aspects were typically 30, 20, and 10% in accordance with the F _d for one, two, and three measurement aspects, respectively. This finding indicates that ignoring azimuthal variations could cause large errors in tree transpiration estimates for Japanese cypress.  相似文献   

Expression of two novel cytochrome P450 3A131 and 3A132 in liver and small intestine of domestic cats     

Honda K  Komatsu T  Koyama F  Kubota A  Kawakami K  Asakura H  Uno Y  Kitazawa T  Hiraga T  Teraoka H 《The Journal of veterinary medical science / the Japanese Society of Veterinary Science》2011,73(11):1489-1492

  相似文献   

Sleep and lying behavior of milking Holstein cows at commercial tie‐stall dairy farms     

Michiru Fukasawa  Tokushi Komatsu  Yumi Higashiyama 《Animal Science Journal》2019,90(9):1313-1319

The aim of this study was to clarify cow's sleep behavior on farm and to examine the influence of some environment and management factors on cow's sleep. Total 85 behavior data (summer 41, autumn 44) were corrected from 12 commercial tie‐stall dairy farm in northern Tohoku area. Daily duration, bout frequency, and averaged bout duration of sleep and lying were measured. Even though there was no significant difference in any lying measurements, daily duration, bout frequency, and averaged bout duration of sleep was significantly different among farms (p < 0.01, p < 0.01, and p < 0.05, respectively). However, we could not find that any managements influence on sleep. There was significant seasonal difference in daily sleep duration (p < 0.01) and sleep bout frequency (p < 0.05). On the other hand, daily lying duration and averaged lying bout duration were significantly different between seasons (p < 0.001 and p < 0.05, respectively). Primiparous cows slept longer and more frequent than multiparous (both p < 0.001). Milk solid‐non‐fat content was positively correlated with daily sleep duration (p < 0.05) and bout frequency (p < 0.01). These results might imply the productive importance of sleep related with anabolic hormones release.  相似文献   

The use of accelerometer to measure sleeping posture of beef cows          下载免费PDF全文

Michiru Fukasawa  Tokushi Komatsu  Yumi Higashiyama  Akinori Oshibe 《Animal Science Journal》2018,89(2):488-493

Sleep is one of the essential behaviors for mammals. The aims of this study were to validate the use of accelerometer for measuring sleeping posture of cattle. Duration of sleeping posture of seven Japanese Black cows from 19.00 to 07.00 hours was measured by both accelerometer and video, and a total of 67 accelerometer and video measurement sets were collected. We calculated Cohen's κ coefficient between accelerometer and video measurements and 91.5% of the κ‐values were >0.80. Intra‐ and inter‐observer coefficient of variance showed that specific acceleration waveform patterns of sleeping posture could be easily and accurately detected by independent observers. There were no significant differences in the frequency of sleeping posture occurrences between accelerometer and video measurements. We compared averaged sleeping posture bout, and the total sleeping posture time between accelerometer and video measurements using regression. In each trait, the slope was close to 1 and the intercept was not different from 0, which showed a strong agreement between accelerometer and video measurements. This shows that an accelerometer could accurately detect sleeping postures of cattle. We conclude that adequate measurements of sleeping postures can be made using an accelerometer.  相似文献   

Relationships between soil CO2 concentration and CO2 production, temperature, water content, and gas diffusivity: implications for field studies through sensitivity analyses     

Shoji Hashimoto  Hikaru Komatsu 《Journal of Forest Research》2006,11(1):41-50

Soil CO₂ levels reflect CO₂ production and transport in soil and provide valuable information about soil CO₂ dynamics. However, extracting information from soil CO₂ profiles is often difficult because of the complexity of these profiles. In this study, we constructed a simple numerical model that simulated soil CO₂ dynamics and performed sensitivity analyses for CO₂ production rates, soil water content and temperature, and gas diffusivity at the soil surface to clarify the relationships among these parameters. Increased soil surface CO₂ flux did not always coincide with higher soil CO₂ concentrations; increased CO₂ production at shallow depths had little effect on soil CO₂ concentrations, while the opposite may be true for high levels of soil water content. Higher soil CO₂ concentration did not always coincide with greater soil surface CO₂ flux; under high soil water conditions, soil surface CO₂ flux sometimes decreased despite increased soil CO₂ concentration. Increases in soil water content did not always enhance both soil surface CO₂ flux and soil CO₂ concentration. Under high soil water conditions, increases in soil water content could lower soil surface CO₂ flux and increase soil CO₂ concentration. Increases in soil temperature resulted in greater soil surface CO₂ flux and higher soil CO₂ concentration in our simulation (extremely high temperatures were not assumed in this study). Gas diffusivity in very shallow layers did affect, albeit weakly, soil CO₂ concentration. The findings of this study may help direct future observations and aid in the interpretation of their results.  相似文献   

Mechanical stress grading of tropical timbers without regard to species     

Anita Firmanti  Efendi Tri Bachtiar  Surjono Surjokusumo  Kohei Komatsu  Shuichi Kawai 《Journal of Wood Science》2005,51(4):339-347

Some reports have shown that for single species the correlation between modulus of elasticity (MOE) and modulus of rupture (MOR) in bending is quite high. Tropical timbers consist of hundreds of species that are difficult to identify. This report deals with the mechanical stress grading of tropical timber regardless of species. Nine timber species or groups of species with a total number of 1094 pieces measuring 60 × 120 × 3000 mm, were tested in static bending. The MOE was measured flat wise, while MOR was tested edge wise. Statistical analysis of linear regression with a dummy model and analysis of covariance were used to analyze the role of MOE and the effect of species on prediction of MOR. The analysis showed that using MOE as a single predictor caused under/overestimation for one or more species and/or groups of species. The accuracy of prediction would be increased with species identification. An allowable stress and reference resistance for species and/or groups of species were provided to compare with the prediction of strength through timber grading. The timber strength class for species and/or groups of species was also established to support the application of mechanical timber grading.  相似文献   

On mechanical behavior of traditional timber shear wall in Taiwan II: simplified calculation and experimental verification     

Wen-Shao Chang  Min-Fu Hsu  Kohei Komatsu  Wei-Jye Chen 《Journal of Wood Science》2007,53(1):24-30

In the previous report of this ongoing study, results of an extensive field survey were collated and a theoretical model was proposed to predict the mechanical behavior of timber shear walls of traditional design in Taiwan. The initial objective of the present report was to propose a simplified calculation method for estimating the initial stiffness and yield strength of traditional timber shear walls. Based on the results of the field survey, a total of 15 full-scale specimens were tested to verify the theoretical model and simplified calculation proposed previously. Good agreement was found from comparison of analytical and experimental results. The results of this study show that the friction behavior between board units and beams plays the major role in resisting the lateral force applied on the timber shear wall, followed by the resistance supplied by embedment. The resistance provided by bamboo nails is minor due to the small section. Another trend found was that for set dimensions of a timber shear wall, the board width can be increased to obtain higher stiffness and strength of the shear wall.  相似文献   

Scaling-up from tree to stand transpiration for a warm-temperate multi-specific broadleaved forest with a wide variation in stem diameter     

Chen-Wei?ChiuEmail author  Hikaru?Komatsu  Ayumi?Katayama  Kyoichi?Otsuki 《Journal of Forest Research》2016,21(4):161-169

Previous studies have demonstrated a clear relationship between diameter at breast height (DBH) and tree transpiration (Q _T) in multi-specific broadleaved forests. However, these studies were conducted with a limited range of tree sizes and species, and thus many multi-specific broadleaved forests fall outside these conditions. Therefore, this study examined the relationship between DBH and Q _T in a warm-temperate multi-specific broadleaved forest (n = 12 species) with a wide range of tree sizes (5.0–70.0 cm DBH) using the Granier-type heat dissipation method. The results showed that, although sap flow density varied between individual trees and species, there was a significant relationship between log Q _T and log DBH (r ² = 0.66, P < 0.001) because of the strong dependence of sapwood area on DBH. This study confirmed the applicability of the relationship for the stand transpiration (E _C) estimates even in a multi-specific broadleaved forest with a wide variation in DBH. Our results also revealed that selecting the sample trees in descending order of DBH effectively reduced potential errors in E _C estimates for a specific sample size, as larger trees contribute more to E _C. This information should be useful for future studies investigating the transpiration of multi-specific broadleaved forests, reducing errors during the scaling-up procedure.  相似文献