A simultaneous estimation procedure for the parameters of the maximum size–density line and self-thinning curve to predict stand development of fast-growing tropical species     

Susumu Kurinobu  Tomiyasu Miyaura 《Journal of Forest Research》2011,16(6):522-525

A simultaneous estimation procedure for the parameters of two functions, i.e., the maximum size–density line and the self-thinning curve, is presented to predict stand development for fast-growing tropical species. This procedure assumes that the rate of periodic reduction in stand density with increasing quadratic mean diameter on a logarithmic scale (r) will increase inversely proportionally to the distance from the maximum size–density line and consequently equals the slope of the line at distance 0. Under this assumption, the maximum size–density line can be incorporated into the self-thinning curve to form an integrated equation with three parameters: k and m, the slope and constant of the maximum size–density line, and a, the rate of reduction of r of the self-thinning curve. These parameters are estimated simultaneously using measurement data on stand density, quadratic mean diameter, and the corresponding r. This procedure was evaluated by application to two data sets: 186 measurements of Acacia mangium and 95 measurements of Paraserianthes falcataria, for which the parameters k and m have previously been calculated. The parameters estimated using this procedure were in good agreement with previous ones based on the A. mangium data set, and the differences found for the P. falcataria data set were also small, within the error variances. Therefore, it is concluded that the proposed procedure would give almost the same estimates from a single calculation step as the previous procedure that required two separate calculation steps.  相似文献   

Understory thinning reduces wood-production efficiency and tree species diversity in subtropical forest in southern Japan     

Shinjiro Fujii  Yasuhiro Kubota 《Journal of Forest Research》2011,16(3):253-259

  相似文献   

Structural unit of xylans from sugi (<Emphasis Type="Italic">Cryptomeria japonica</Emphasis>) and hinoki (<Emphasis Type="Italic">Chamaecyparis obtusa</Emphasis>)     

Takashi Yamasaki  Ayumi Enomoto  Atsushi Kato  Tadashi Ishii  Kazumasa Shimizu 《Journal of Wood Science》2011,57(1):76-84

Arabinoglucuronoxylans (AGXs) isolated from the holocellulose of sugi (Cryptomeria japonica) and hinoki (Chamaecyparis obtusa) contained one 4-O-methyl-d-glucopyranosyluronic acid (4-O-Me-d-GlcAp) residue per 6.2 d-xylopyranose (d-Xylp) residues and one 4-O-Me-d-GlcAp residue per 3.8 d-Xylp residues. These AGXs were subjected to partial acid hydrolysis. Analyses by size exclusion chromatography and electrospray-ionization mass spectroscopy of the neutral sugar fractions in the hydrolysates showed the presence of xylooligosaccharides having a degree of polymerization of 2-8 in addition to d-Xyl, suggesting that the AGXs from sugi and hinoki contained unsubstituted chains consisting of at least eight d-Xyl residues. The acidic sugars in the hydrolysates were separated into two series of aldouronic acids composed of 4-O-Me-d-GlcAp and d-Xylp by ion-exchange chromatography. The first series included aldouronic acids from aldobiouronic acid (4-O-Me-d-GlcAp-Xyl) to aldopentaouronic acids (4-O-Me-d-GlcAp-Xyl₄). The second series were aldouronic acids composed of two 4-O-Me-d-GlcAp residues and 2-4 d-Xyl residues. In these acidic sugars, the uronic acid side chains were located on two contiguous d-Xyl residues. These facts indicated that AGXs from sugi and hinoki had a structural unit containing two 4-O-Me-d-GlcAp residues on two contiguous d-Xyl residues as well as AGXs from spruce and larch.  相似文献   

Nondestructive measurement of cross-sectional shape of a tree trunk     

Akio Koizumi  Keisuke Ikeda  Kei Sawata  Takuro Hirai 《Journal of Wood Science》2011,57(4):276-281

To evaluate windthrow resistance with respect to stem breakage, a nondestructive method for determining the shape of trunk cross sections was developed. In this method, the coordinates of multiple gauge points set on the perimeter of a trunk are calculated by measuring the distances between them. The shape between the gauge points is generated with the use of a profile gauge placed between them. Measurement tests were conducted using profile gauges with lengths of 300 and 900 mm on model specimens with four shape patterns and four different diameters. The accuracy of the estimation was verified by comparing the section modulus calculated for the generated image and for the photograph. The average ratio of section modulus (generated/photo) for all specimens was 0.994, which indicates that the proposed method is highly accurate. The section moduli of hollow trunks can be evaluated using the profile method together with the drill resistance technique on the condition that 26% of the trunk diameter could be drilled without skew.  相似文献   

Evaluation of biological activities of extracts from the fruiting body of <Emphasis Type="Italic">Pleurotus citrinopileatus</Emphasis> for skin cosmetics     

Tian-Xiao Meng  Shoko Furuta  Sayaka Fukamizu  Ryoko Yamamoto  Hiroya Ishikawa  Enos Tangke Arung  Kuniyoshi Shimizu  Shoji Ohga  Ryuichiro Kondo 《Journal of Wood Science》2011,57(5):452-458

Pleurotus citrinopileatus Singer has recently become a popular delicacy in East Asian countries. We prepared a methanol extract, soluble fractions from the methanol extract, and a hot water extract of the fruiting bodies of P. citrinopileatus. The biological activities such as melanin biosynthesis inhibition, tyrosinase inhibition, antioxidant activities [1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging, oxygen radical absorbance capacity (ORAC), and superoxide dismutase (SOD)-like activity], antibacterial activities, and antihyaluronidase activities of these extracts were evaluated. We found that the n-hexanesoluble, diethyl ether-soluble, and ethyl acetate-soluble fractions exhibited melanin biosynthesis inhibition in B16 melanoma cells, as well as antioxidant (ORAC) and antibacterial activities. However, the n-butanol-soluble and water-soluble fractions and the methanol and hot water extracts exhibited antioxidant (DPPH radical scavenging, SOD-like activity) and antihyaluronidase activities. These results indicate that the fruiting bodies of P. citrinopileatus have the potential to be used as an ingredient in skin cosmetics.  相似文献   

Small-angle X-ray scattering study on nanostructural changes with water content in red pine,American pine,and white ash     

Weidong Cheng  Xueqing Xing  Dehong Wang  Kunhao Zhang  Quan Cai  Guang Mo  Zhongjun Chen  Zhonghua Wu 《Journal of Wood Science》2011,57(6):470-478

Wood is a highly sophisticated and multihierarchical material. The nanoscale structures in natural cell walls of red pine, American pine, and white ash specimens were investigated using the small-angle X-ray scattering (SAXS) technique. A tangent-by-tangent method was used to analyze the SAXS data. The results demonstrate that the multihierarchical scatterers in the three specimens can be divided into two dominant components, i.e., a sharp component and a wide component. The sharp component mainly corresponds to the contribution of cellulose microfibrils, and its size is almost unaffected by the water content. However, the wide component includes voids or microcracks and cellulose microfibril aggregates; its size changes, reflecting swelling and water accumulation in the voids or microcracks. Because of the different morphological features of the cell walls, softwood (red pine and American pine) displays different tendencies from hardwood (white ash) in terms of changes in the wide component with water content: the average scatterer size of the wide component has an incremental tendency with the water content in softwood, but it has a descending tendency in hardwood. Fractal analysis further revealed that in white ash the surface of scatterers is coarser and the scatterers form more compact nanostructures than in the two pine woods. All this nanostructural information can be used to explain well the difference of swelling behaviors between the two pines and the white ash.  相似文献   

Development of an air-injection press for preventing blowout of particleboard II: improvement of board properties using small-diameter holes for air injection     

Hideaki Korai  Nan Ling 《Journal of Wood Science》2011,57(6):507-511

An air-injection press, which has holes punched in the heating plates, injects high-pressure air through the holes of one plate into boards during press heating. The air-injection press can manufacture boards from high-moisture-content particles by controlling blowouts of the boards. In this study, boards were manufactured from particles that had a moisture content of 25% by using the air-injection press, which reduced the required pressing time. Boards manufactured by injecting air through holes of 5 mm in diameter were of poor quality with a low internal bond strength of only 0.31 MPa. When the hole diameter was reduced to 1 mm, the internal bond strength increased to 0.44 MPa. A high air-injection pressure of 0.55 MPa also resulted in improved board properties over those for boards manufactured at lower pressures. This was probably because a large amount of binder was released from boards through the 5-mm holes, together with water vapor, during air injection; the small-diameter holes reduced the release of binder, resulting in better board properties.  相似文献   

Revisiting the mechanism of <Emphasis Type="Italic">β-O</Emphasis>-4 bond cleavage during acidolysis of lignin IV: dependence of acidolysis reaction on the type of acid     

Takaaki Imai  Tomoya Yokoyama  Yuji Matsumoto 《Journal of Wood Science》2011,57(3):219-225

The dependence of the acidolysis reaction of a C₆-C₃ dimeric nonphenolic β-O-4 type lignin model compound, 2-(2-methoxyphenoxy)-1-(3,4-dimethoxyphenyl) propane-1,3-diol (veratrylglycerol-β-guaiacyl ether, VG), on the type of acid applied was examined using three different acids [0.2 mol/l HCl, 0.2 mol/l HBr, and 0.1 mol/l (0.2 N) H₂SO₄ in 82% aqueous 1,4-dioxane at 85°C]. In the HCl system, the major reaction modes of the corresponding benzyl cation-type intermediate (BC), which is produced by protonation of the α-hydroxyl group of VG and successive release of the water molecule, are the abstraction of the β-proton and hydride transfer from the β-to the α-position. The liberation of formaldehyde from the γ-hydroxymethyl group of BC is the predominant reaction mode in the H₂SO₄ system. Apparently, an unknown reaction mode or modes is operative in the early stage of the HBr system that causes rapid disappearance of VG accompanied by the quantitative formation of 2-methoxyphenol without affording the common counterpart of a Hibbert’s ketone, 1-hydroxy-3-(3,4-dimethoxyphenyl) propan-2-one. The reaction mode in the HBr system changes with the progress of the reaction and is the same as that in the HCl system after the early stage.  相似文献   

Reductions in greenhouse gas emissions by using wood to protect against soil liquefaction     

Chihiro Kayo  Seiji Hashimoto  Atsunori Numata  Masanori Hamada 《Journal of Wood Science》2011,57(3):234-240

We compared the greenhouse gas (GHG) emissions from a log pile (LP) to those from a sand compaction pile (SCP) and from cement deep mixing (CDM) as measures against soil liquefaction, assuming that forest and waste management scenarios influence the GHG (CO₂, CH₄, and N₂O) balance of wood. We found little difference between the LP and SCP methods with respect to GHG emissions from fossil fuel and limestone consumption. However, GHG emissions from the CDM method were seven times higher than emissions from the LP method. In the GHG balance of wood, when the percentage of CH₄ emissions from carbon in underground wood was lower than 3.3%, permanent storage in the log achieved greater reductions in GHG emissions than using the waste log as fuel in place of coal or heavy oil. In order to obtain reductions in GHG emissions by replacing SCPs or CDM with LPs, sustainable forest management with reforestation and prevention of CH₄ emissions from the underground log are essential. Using reforestation, permanent storage of the log, no CH₄ emission from the log, and using logging residues instead of coal, the LP can achieve reductions in GHG emissions of 121 tonnes of CO₂ per 100 m² of improvement area by replacing CDM.  相似文献   

Bow variation in kiln-dried boxed-heart square timber of sugi (<Emphasis Type="Italic">Cryptomeria japonica</Emphasis>) cultivars     

Kana Yamashita  Yasuhiko Hirakawa  Shuetsu Saito  Hiroshi Nakatani  Motoyoshi Ikeda 《Journal of Wood Science》2011,57(5):363-370

To evaluate the bow variation in boxed-heart square timber of sugi (Cryptomeria japonica), bows from kiln-dried timber for five sugi cultivars with different longitudinal shrinkage trends were compared for two stem heights. Two general trends were observed, depending on the cultivar: (1) either the bow was larger at the lower than at the upper part of the stem, or (2) the bows at the lower and the upper parts of the stem were similar. In timber that had larger bow values, the gradients of longitudinal shrinkage were large across the radius and along the length of the timber. There was a positive relationship between the bow and longitudinal shrinkage. These results suggest that the bow variation between the timbers was caused by a variation in longitudinal shrinkage, which was affected by the microfibril angle. Furthermore, the bow was inversely proportional to the modulus of elasticity, which suggests that timber with a low modulus of elasticity is susceptible to a large bow due to large longitudinal shrinkage.  相似文献