Influence of Ammoniacal Copper Quaternary treatments on mechanical properties of blue-stained Lodgepole Pine wood   总被引：1，自引：0，他引：1  

江京辉任海青  吕建雄骆秀琴　吴玉章 《林业研究》2007,18(3):213-216

Three concentrations （2.8%, 2.0%, 1.2%） of Ammoniacal Copper Quaternary （ACQ） was selected to treat Lodgepole pine wood for evaluating ACQ treatment on mechanical properties of blue-stained wood. The bending modules of elasticity （MOE）, modules of rupture （MOR）, toughness and shearing strength parallel to grain on tangential surface, are tested according to the criteria GB1927-1943-91. Non-treated sample were also tested according to the same procedure. The results showed that the three groups specimen impregnated by different concentrations of ACQ solution met the AWPA standard 2003 of America （UC4A 6.4g/cm^3）. There were significant difference of toughness between treated wood and non-treated wood （p=0.01）, but there were no statistically significant differences among three concentrations in terms of toughness, and toughness of treated wood was approximately 20% lower than non-treated. MOR, MOE as well as sheafing strength parallel to grain were found to be not significantly different between treated wood and non-treated one, and there were no statistically significant difference among three concentrations of ACQ too. Toughness, MOR, MOE and sheafing strength parallel to grain increased with decrease of concentration of ACQ, but they were hardly affected by ACQ preservatives.  相似文献   

Checklist of Eumolpidae （Coleoptera,Chrysomeloidea） from Mao＇ershan region including one new record species from China     

LI Xing-peng LI Cheng-de 《林业研究》2007,18(1):65-68

  相似文献   

Spectrophotometrical characteristics in the near infrared region in beech (<Emphasis Type="Italic">Fagus crenata</Emphasis>) and pine (<Emphasis Type="Italic">Pinus densiflora</Emphasis>) litters at the various decomposing stages     

Kenji Ono  Motohiro Hasegawa  Makoto Araki  Masahiro Amari  Masakazu Hiraide 《Journal of Forest Research》2007,12(4):255-261

We examined the relationships between the absorptional characteristics in the near infrared region and the chemical changes of decomposing beech (Fagus crenata) and pine (Pinus densiflora) litters. Spectra as well as the concentrations of chemical substances approached each other and converged with decomposition, although both initial characteristics differed markedly between beech and pine. This indicated that the fundamental chemical structures were almost the same, although their organochemical composition differed. Specific absorption bands for lignin, polysaccharide, and protein were identified at 2,140 and 1,670 nm, 2,270, 1,720, 1,590, and 1,216 nm, and 2,350 nm, respectively. Absorbance at 1,670 nm, peculiar band of aromatics, showed a positive correlation with lignin concentration, which suggested the relative increment of aromatics due to condensed lignin in decomposing litters. Absorbance at 2,140 nm, characterized as the C–H bond in HRC = CHR, showed a negative correlation with lignin concentration, which suggested the decrements of some structures such as side-chains in lignin polymers unrelated to aromatics. Absorbance at 2,270, 1,720, and 1,216 nm, specified to O–H/C–O/C–H bonds in saccharide, might reflect the change of polysaccharide during decomposition because they showed a positive correlation to polysaccharide concentration. In the same way, absorbance at 2,350 nm, identified to the C–H/CH₂ bonds in protein, showed a negative correlation to nitrogen concentration in decomposing litters, which might indicate that the C–H/CH₂ bonds in protein decreased with decomposition due to microbial consumption of carbon in protein. Our findings suggested the possibility that the spectral changes indicate the litter digestibility during decomposition and that also explain the compositional change in decomposing litters.  相似文献   

The influences of boiling and drying treatments on the behaviors of tension wood with gelatinous layers in <Emphasis Type="Italic">Zelkova serrata</Emphasis>     

Kentaro Abe  Hiroyuki Yamamoto 《Journal of Wood Science》2007,53(1):5-10

This study examined how boiling and drying treatments influenced various physical properties of the tension wood with gelatinous fibers (G-fibers) of a 29-yearold Zelkova branch. By boiling treatment, tension wood with numerous G-fibers contracted considerably in the longitudinal direction and the longitudinal Young’s modulus decreased in spite of the water-saturated condition. The drying treatment caused green tension wood and boiled tension wood with numerous G-fibers to shrink longitudinally and increased their longitudinal Young’s moduli. These specific behaviors in tension wood were highly correlated with the proportion of G-fibers in a specimen and were probably caused by the microscopic behavior of cellulose microfibril (CMF) in the gelatinous layers (G-layers). The longitudinal shrinkage of tension wood due to drying suggests the existence of a hygro-sensible, noncrystalline region in the CMF, which is abundant in the G-layer. Furthermore, the noncrystalline region in the CMF softens during boiling treatment, resulting in the reduction of the longitudinal Young’s modulus in tension wood. The longitudinal contraction of tension wood with G-fibers by boiling might be caused by the tensile growth stress remaining in green G-layers. However, no changes were detected in the 004 d-spacing of cellulose crystal in tension wood from the boiling and drying treatments, regardless of the proportion of G-fibers.  相似文献   

Criterion for estimating humidity control capacity of materials in a room     

Toshiro Morooka  Yoko Homma  Misato Norimoto 《Journal of Wood Science》2007,53(3):192-198

As a measure of estimating humidity control capacity of materials in an airtight room under sinusoidal temperature variation, we used the Cb value, which is the ratio of the range of variation in relative humidity in a steel box lined with the material of interest to the range in an empty steel box. In order to clarify the factors that affect the Cb value, we focused on both the temperature variation rate and the area that is lined in the box. It was found that changing the rate of temperature variation over one period strongly affected the Cb value, although the amplitude of temperature variation did not. We further noticed that the difference between the time when peak temperature was reached and the time when peak absolute humidity was reached (peak time difference), was found to be useful for estimating the humidity control capacity of materials. Knowing the difference between the phase when peak temperature was reached and the phase when peak absolute humidity was reached (phase angle difference) was also useful. Because the Cb value was affected by both the variation period and the lined area in the box, we can draw a contour diagram of the period and the lined area for materials to give an overview of the humidity control capacity of a material. The materials of primary interest in this study were Japanese cedar and porous ceramics.  相似文献   

Effects of different ecological and silvicultural factors on beetle catches in the Turkish fir (<Emphasis Type="Italic">Abies bornmülleriana</Emphasis> Mattf.) ecosystems     

Oktay Yıldız  Derya Eşen  Süleyman Akbulut 《Journal of pest science》2007,80(3):145-150

To study the bark beetle attacks on Turkish fir stands and to determine the principle site and stand factors influencing beetle attacks, trap log method was used in the Western Black Sea Region of Turkey. The study was carried out in ten different locations prior to flying time in February 2003. On each experimental plot, three healthy fir trees with 30–50 cm diameter and 200 m apart were cut down with a chainsaw. From each sampling tree, needles were sub-sampled for determination of specific leaf-area and macro-nutrient concentrations. In addition, on each experimental plot, crown closure, basal-area, and stand density were measured. To determine the bulk density and nutrient concentrations of the soil, samples were taken around trees on each plot. The relationship between measured stand variables, the number of beetle species and beetle populations were evaluated using correlation and stepwise multiple regression procedure. Eight different species belonging to four different families from Coleoptera were identified in examining the trap logs. Six of these eight species (Pissodes piceae Illig., Pissodes notatus Fabr., Cryphalus piceae Ratz., Pityophthorus pityographus Ratz., Xyloterus lineatus Oliv., Pityokteines curvidens Germ.) were identified as harmful beetles (HB). The other two (Thanasimus formicarius L. and Rhizophagus dispar Payk.) were identified as predator species. The analysis showed that the total number of HB increased as the site’s slope and needle specific leaf area increased. However, as needle N concentrations increased, HB population decreased. Increased Ca concentration in fir needle reduced total insect attack.  相似文献   

Above- and belowground biomass measurements in an unthinned stand of Sitka spruce (<Emphasis Type="Italic">Picea sitchensis</Emphasis> (Bong) Carr.)     

Carly Green  Brian Tobin  Michael O’Shea  Edward P. Farrell  Kenneth A. Byrne 《European Journal of Forest Research》2007,126(2):179-188

Reporting carbon (C) stocks in tree biomass (above- and belowground) to the United Nations Framework Convention on Climate Change (UNFCCC) should be transparent and verifiable. The development of nationally specific data is considered ‘good practice’ to assist in meeting these reporting requirements. From this study, biomass functions were developed for estimating above- and belowground C stock in a 19-year-old stand of Sitka spruce (Picea sitchensis (Bong) Carr.). Our estimates were then tested against current default values used for reporting in Ireland and literature equations. Ten trees were destructively sampled to develop aboveground and tree component biomass equations. The roots were excavated and a root:shoot (R) ratio developed to estimate belowground biomass. Application of the total aboveground biomass function yielded a C stock estimate for the stand of 74 tonnes C ha⁻¹, with an uncertainty of 7%. The R ratio was determined to be 0.23, with an uncertainty of 10%. The C stock estimate of the belowground biomass component was then calculated to be 17 tonnes C ha⁻¹, with an uncertainty of 12%. The equivalent C stock estimate from the biomass expansion factor (BEF) method, applying Ireland’s currently reported default values for BEF (inclusive of belowground biomass), wood density and C concentration and methods for estimating volume, was found to be 60 tonnes C ha⁻¹, with an uncertainty of 26%. We found that volume tables, currently used for determining merchantable timber volume in Irish forestry conditions, underestimated volume since they did not extend to the yield of the forest under investigation. Mean stock values for belowground biomass compared well with that generated using published models.  相似文献   

Erratum to: Regulation effect of <Emphasis Type="Italic">Phyllostachys pubescens</Emphasis> methanol extractives on growth of seed plants     

Jun Mu  Tohru Uehara  Takeshi Furuno 《Journal of Wood Science》2007,53(1):85-85

Due to a processing error, first author's name is missing in the HTML version of this article abstract page. The correct authors are given below: Jun Mu, Tohru Uehara, Takeshi Furuno The online version of the original article can be found at  相似文献   

Family Forest Owners’ Familiarity with Conservation Programs in Mississippi,USA     

Edward Mutandwa  Robert K. Grala  Stephen C. Grado  Ian A. Munn 《Small-Scale Forestry》2016,15(3):303-319

  相似文献   

Chemical characterization of smoke from the production process of wood-plastic composites     

Wang Shi-fa Zhang Ai-jun 《中国林学(英文版)》2007,9(1):57-62

The chemical composition of unpleasant smell, emitted from the production process of wood-plastic composites using Manchurian ash sawdust (Fraxinus mandschurica Rupr.) and polypropylene powder as the raw material, was investigated. Wood sawdust and polypropylene powder were subjected to heat treatment to 290°C during 8 min (the conditions were similar to those employed on an industrial scale). The emitted compounds were collected and analyzed by gas chromatography-mass spectrometry (GC-MS). The analytical r...  相似文献