Regional mixed-effects height–diameter models for loblolly pine (<Emphasis Type="Italic">Pinus taeda</Emphasis> L.) plantations     

Guillermo Trincado  Curtis L. VanderSchaaf  Harold E. Burkhart 《European Journal of Forest Research》2007,126(2):253-262

A height–diameter mixed-effects model was developed for loblolly pine (Pinus taeda L.) plantations in the southeastern US. Data were obtained from a region-wide thinning study established by the Loblolly Pine Growth and Yield Research Cooperative at Virginia Tech. The height–diameter model was based on an allometric function, which was linearized to include both fixed- and random-effects parameters. A test of regional-specific fixed-effects parameters indicated that separate equations were needed to estimate total tree heights in the Piedmont and Coastal Plain physiographic regions. The effect of sample size on the ability to estimate random-effects parameters in a new plot was analyzed. For both regions, an increase in the number of sample trees decreased the bias when the equation was applied to independent data. This investigation showed that the use of a calibrated response using one sample tree per plot makes the inclusion of additional predictor variables (e.g., stand density) unnecessary. A numerical example demonstrates the methodology used to predict random effects parameters, and thus, to estimate plot specific height–diameter relationships.  相似文献   

First-year growth response of cold-stored,nursery-grown aspen planting stock     

Lee A. Martens  Simon M. Landhäusser  Victor J. Lieffers 《New Forests》2007,33(3):281-295

This research examined the first year growth characteristics of cold stored and transplanted nursery-produced aspen (Populus tremuloides) seedlings (container and bareroot (BR)) and compared it to the growth of seedlings that had not been transplanted (established from germinants in the field) and therefore had an unrestricted root system (UR). Prior to planting, nursery-produced seedlings were placed in cold storage (−3°C) and root growth potential (RGP) and total non-structural carbohydrate (TNC) root reserves were tested at 0, 10, 75 and after 150 (container) and 190 days (BR) of storage. Both container and BR stock had much lower root to shoot ratios (RSRs) and root carbohydrate reserves compared to UR seedlings after 170 days. During storage, root reserves in container stock declined faster than in the BR and UR seedlings. RGP in all nursery stock was the highest after 75 days of storage, while longer storage resulted in shoot dieback and reduced root growth. After the first growing season, UR seedlings were one tenth the size of the nursery stock; however, in the second growing season they had no stem dieback and grew twice the height and stem diameter. The higher RSRs and root reserves in the UR seedlings was likely caused by early bud set in its first year of growth. This suggests that inducing bud set earlier in the growing regime might allow seedlings to increase root mass and carbohydrate reserves.  相似文献   

Radial variation of vessel size and distribution in cork oak wood (<Emphasis Type="Italic">Quercus suber</Emphasis> L.)     

Sofia Leal  Vicelina B. Sousa  Helena Pereira 《Wood Science and Technology》2007,41(4):339-350

Quercus suber L. is an important species producing cork whose wood characteristics have not been investigated a lot. Cork oak wood vessels are a striking feature and the most abundant wood tissue largely influencing density and permeability. Vessel size and distribution were studied in approximately 40 year-old and never debarked cork oaks by continuously measuring along the radial direction in the transverse section of wood discs taken at 1.3 m of height using image analysis techniques. The vessel size increases with age from 7660 ± 2286 to 21136 ± 6119 μm², the conductive area from 5.4 ± 2.2 to 11.6 ± 3.9%, and the vessel density remains approximately constant between 5.2 ± 1.5 and 7.3 ± 3.5 vessels/mm². In comparison with ring-porous and some evergreen oaks, cork oaks show a similar conductive area but smaller vessels. Vessel architecture is known to play an important role on oaks tolerance to hydric stress, and these cork oak trees were growing under very harsh edaphoclimatic conditions, not tolerated by other oaks. The well-developed and deep root system allowing access to constant water supply may contribute to the cork oak’s relatively high conductive area.  相似文献   

日本北海道北部寒温带森林流域林冠层凋落物及其养分归还量的景观格局(英文)     

徐小牛  柴田英昭 《林业研究》2007,18(4):249-254

Within a forested watershed at the Uryu Experimental Forest of Hokkaido University in northern Hokkaido, overstory litterfall and related nutrient fluxes were measured at different landscape zones over two years. The wetland zone covered with Picea glehnii pure stand. The riparian zone was deciduous broad-leaved stand dominated by Alnus hirsuta and Salix spp., while the mixture of deciduous broadleaf and evergreen conifer dominated by Betula platyphylla, Quercus crispula and Abies sachalinensis distributed on the upland zone. Annual litterfall averaged 1444, 5122, and 4123 kg.hm^-2·a^-1 in the wetland, riparian and upland zones, respectively. Litterfall production peaked in September-October, and foliage litter contributed the greatest amount （73.4%-87.6 %） of the annual total litterfall. Concentrations of nutrients analyzed in foliage litter of the dominant species showed a similar seasonal variation over the year except for N in P glehnii and A. hirsuta. The nutrient fluxes for all elements analyzed were greatest on riparian zone and lowest in wetland zone. Nutrient fluxes via litterfall followed the decreasing sequence： N （11-129 kg.hm-2.aq） 〉 Ca （9-69） 〉 K （5-20） 〉 Mg （3-15） 〉 P （0.4-4.7） for all stands. Significant differences were found in litterfall production and nutrient fluxes among the different landscape components. There existed significant differences in soil chemistry between the different landscape zones. The consistently low soil C：N ratios at the riparian zone might be due to the higher-quality litter inputs （largely N-fixing alder）.  相似文献   

Fundamental studies on wood/cellulose-plastic composites: effects of composition and cellulose dimension on the properties of cellulose/PP composite   总被引：2，自引：0，他引：2  

Rashmi Kumari  Hirokazu Ito  Masahiro Takatani  Miho Uchiyama  Tadashi Okamoto 《Journal of Wood Science》2007,53(6):470-480

Although wood/cellulose-plastic composites (WPC) of low wood/cellulose content have been more accepted worldwide and are promoted as low-maintenance, high-durability building products, composites containing high wood/cellulose content are not yet developed on an industrial scale. In this study, flow properties, mechanical properties, and water absorption properties of the compounds of cellulose microfiber/polypropylene (PP) and maleic anhydride-grafted polypropylene (MAPP) were investigated to understand effects of the high cellulose content and the dimensions of the cellulose microfiber. The molding processes studied included compression, injection, and extrusion. It was found that fluidity is not only dependent on resin content but also on the dimension of the filler; fluidity of the compound declined with increased fiber length with the same resin content. Dispersion of the composite was monitored by charge-coupled device (CCD) microscope. Increasing the plastic content in the cellulose-plastic formulation improved the strength of mold in addition to the bond development between resin and filler, and the tangle of fibers. The processing mode affected the physicomechanical properties of the cellulosic plastic. Compression-molded samples exhibited the lowest modulus of rupture (MOR) and modulus of elasticity (MOE) and the highest water absorption, while samples that were injection-molded exhibited the highest MOR (70 MPa) and MOE (7 GPa) and low water absorption (2%).  相似文献   

Crystalline structure of heat-treated Scots pine [<Emphasis Type="Italic">Pinus sylvestris</Emphasis> L.] and Uludağ fir [<Emphasis Type="Italic">Abies nordmanniana</Emphasis> (Stev.) subsp. <Emphasis Type="Italic">bornmuelleriana</Emphasis> (Mattf.)] wood     

Mehmet Akgül  Esat Gümüşkaya  Süleyman Korkut 《Wood Science and Technology》2007,41(3):281-289

The aim of this study was to determine changes in crystallinity and crystalline unit cell type of heat-treated Scots pine (Pinus sylvestris L.) and Uludağ fir (Abies nordmanniana stev. subsp. bornmuelleriana Mattf.) wood samples by means of FT-IR spectroscopic method. Heat treatment was applied on the test samples in an oven at three different temperatures (120, 150, and 180°C) and for two different periods of time (6 and 10 h) under atmospheric pressure. It was designated that crystallinity of both Scots pine and Uludağ fir wood samples increased during heat treatment depending on the duration. However, monoclinic structure in crystalline unit cells of Scots pine and Uludağ fir wood samples converted to triclinic structure when heat treated. It was estimated that monoclinic structure was dominant in the crystalline unit cell. It was established that the crystalline structure of Scots pine wood samples was more affected by heat treatment than that of Uludağ fir wood samples.  相似文献   

Plant diversity of secondary forests in response to anthropogenic disturbance levels in montane regions of northeastern China   总被引：4，自引：0，他引：4  

Jiaojun Zhu  Zhihong Mao  Lile Hu  Jinxin Zhang 《Journal of Forest Research》2007,12(6):403-416

The effects of anthropogenic disturbances on forest structure and plant diversity of secondary forest ecosystems were evaluated based on the classification by site factors in the montane regions of northeastern China. Forty-five sample plots containing 720 sub-plots of overstory species (8 m × 8 m), 1,440 quadrats of understory species (2 m × 2 m), and 1,440 quadrats of herbaceous layer species (1 m × 1 m) were clustered into five groups (G1, G2, G3, G4 and G5) by site variables with Hierarchical Cluster Analysis. Meanwhile, the disturbance levels corresponding to the five groups were determined according to the factors influencing human disturbances (D0-G2, D1-G1, D2-G3, D3-G5, and D4-G4). Species diversities of overstory, understory, herbaceous layer and overall species were evaluated using species number, Margalef index, Pielou index, Shannon–Wiener index, and Simpson index; and β-diversities (Whittaker index, Cody index). Basal area of stands exhibited a decreasing trend along the disturbance level due to a gradual increase in the extraction of timber by the human disturbances. The indices of species diversity suggested that overstory and understory species were distributed evenly among the groups or disturbance levels. There were no absolutely dominant tree species in the secondary forest ecosystems. The differences in site factors and the current disturbance intensities were not intense enough to lead to loose changes in overstory and understory species. The species diversity indices exhibited the maximum values at D3 (G5) for herbaceous layer species; this may suggest that the current disturbance intensities were intense enough to lead the changes of herbaceous layer species. Three rare and endangered species (Juglans mandshurica, Fraxinus mandshurica and Acanthopanax senticosus) were found within the secondary forests. These rare and endangered species appeared in each clustered group or disturbance level, which suggested that the current disturbance intensity in the study area was not strong enough to influence the distribution of rare and endangered species. The current disturbances in the secondary forests may not lead to a decrease in stability and complexity of the overstory and understory species, but the higher disturbance level may be intense enough to change the habitat fitness for the herbaceous species. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized authors.  相似文献   

林业生态工程效益补偿问题研究初探   总被引：1，自引：0，他引：1  

周金星  彭镇华  费世民  李冬雪  孙启祥  漆良华 《林业研究》2007,18(2):157-164

生态效益补偿对于促进林业生态工程建设、保护森林生产者和经营者的切身利益具有重要的作用.本文在分析国内外生态效益补偿现状的基础上,通过对建立森林生态效益补偿机制的必要性、原则、途径以及补偿标准等问题进行深入探讨,为进一步完善我国森林生态效益补偿机制提供科学依据.森林生态效益补偿资金的建立,不仅为森林资源管护提供稳定的资金来源,更是对森林生态效益价值的认可,从根本上解决了林业生态工程建设的动力和机制问题,将对中国林业和生态建设产生广泛而深远的影响.  相似文献   

Dynamics of Zn between soil and plant in Northeast Leymus chinensis grassland     

Zhou Xiao-mei  Guo Ji-xun  Wang Yong  Zhou Tian 《林业研究》2006,17(3):206-210

A study was conducted to determine the dynamic of Zn content between soil and plant in the natural protection zone of Leymus chinensis grassland in Changling County (44°30′–44°45′N; 123°31′–124°10′E), Jilin Province, China. Results showed that the total Zn content was lower, available Zn content had a moderate level in the soil, and the plants was not lack of Zn. During the growing season, content of total Zn and available Zn in soil showed a down-trend distribution along the soil profile. Content of total Zn had a significantly positive correlation with that of the organic matter, but it was negatively correlated to soil pH. Monthly dynamic of the average content of total Zn showed a “V” type curve in the growing season from May to August, and July was the nadir. The trend of the average content of available Zn was similar to the content of total Zn, but was down after August; Zn content variation in the organs and litter of L. chinensis was great, with the order of root>rhizome >leaf>stem>litter. The ratio of available Zn content in A layer versus B layer was more than 2 times that of the total Zn, which indicated that the soil of A layer had higher enrichment capacity of available Zn. The enrichment of Zn in the root of L. chinensis was 44.17 times as that in the soil. The absorbing intensity of root had a significantly negative correlation with the activity of Zn in the soil (r=−0.8800, p<0.01). Biography: ZHOU Xiao-mei (1966–), female, Ph.D., associate professor of Jilin Normal University, Siping 136000, P.R. China.  相似文献   

Effect of temperature and compression on the mechanical behavior of steam-treated wood   总被引：2，自引：0，他引：2  

Petri P. KÄrenlampi  Pekka TynjÄlÄ  Pasi StrÖm 《Journal of Wood Science》2003,49(4):298-304

The mechanical behavior of steamed spruce wood changes dramatically with compression along the grain, the change being much more moderate perpendicular to the grain. The stiffness decrement due to increased temperature is greatest in the tangential material direction. The stiffness decrement due to compression is greatest along the grain. Compression to 80% compressive strain at 131°C inverts the order of the material directions regarding stiffness, the stiffness being the least along the grain. Plastic strain due to compression is greater at higher temperatures. The compression-induced decrement of stiffness along the grain is greater at higher temperatures, but the off-axis decrement of stiffness is less at higher temperatures.  相似文献