水氮耦合对黑土稻作产量与氮素吸收利用的影响     

秦子元  张忠学  孙迪  宋健  张作合  李铁成 《农业机械学报》2021,52(12):324-335,357

为探明不同水氮耦合模式下黑土区水稻产量形成和氮素吸收利用的规律,设置常规淹灌（F）、浅湿灌溉（W）和控制灌溉（C）3种灌溉模式,0、85、110、135kg/hm2（N0、N1、N2、N3）4个施氮量水平,共12个处理,研究不同水氮耦合模式对水稻干物质、产量、氮素吸收转运、水氮利用效率的影响。结果表明：常规淹灌和浅湿灌溉模式下,水稻地上部各器官干物质累积量随施氮量的增加而增大,而控制灌溉模式随施氮量的增加先增大后减小;水稻地上部不同器官氮素累积量随施氮量的增加而增大,相同施氮水平,控制灌溉模式的叶、茎鞘和穗氮素累积量较常规淹灌提高了27.80%~43.42%、18.32%~24.97%、13.85%~24.25%,较浅湿灌溉提高了0.96%~13.18%、10.73%~12.86%、10.53%~12.61%;3种灌溉模式下,水稻地上部干物质、氮素累积速率均随施氮量的增加而增大,且控制灌溉模式高于浅湿灌溉和常规淹灌模式,干物质、氮素累积始盛期随施氮量增加而提前;水稻植株平均氮素累积速率达到峰值时间比平均干物质累积速率达到峰值时间提前11.39d;相较于常规淹灌和浅湿灌溉模式,控制灌溉模式更有利于提高水稻产量,其中CN2处理产量最大,为10272.57kg/hm2;控制灌溉模式显著提升氮肥农学利用效率和氮肥偏生产力;相同灌溉模式下,叶、茎鞘氮素转运率以及穗部氮素转运贡献率随施氮量增加而减小。水稻产量与灌溉水分利用效率、水分生产效率、氮肥农学利用效率、百千克籽粒吸氮量之间呈极显著正相关（P<0.01）,与氮素籽粒生产效率之间呈极显著负相关（P<0.01）。适宜水氮耦合模式可提高水稻产量和氮素吸收利用,综合考虑CN2处理为最佳水氮耦合模式。  相似文献   

基于MCR-ANN-CA模型的包头市生态用地演变模拟   总被引：1，自引：0，他引：1  

刘建华  张启斌  YANG Di  岳德鹏  于强  杨斓 《农业机械学报》2019,50(2):187-194

以内蒙古自治区包头市为研究区,耦合最小累积阻力(MCR)模型、人工神经网络(ANN)和元胞自动机(CA)构建MCR-ANN-CA模型。利用MCR模型量化包头市各用地类型演变为生态用地时的阻力,构建CA适宜性规则;利用ANN模型提取CA邻域转换规则,基于包头市2006、2011年土地利用数据及归一化植被指数(NDVI)、高程、坡度、水体距离、人口密度多项数据,对2016年生态用地演变情景进行模拟,以2016年实际生态用地分布为参照,将该模型模拟结果与CA-Markov模型的模拟结果进行对比(以2016年实际景观分布为参照),结果显示,两种模型模拟结果的卡帕一致性指数(Kappa index of agreement,KIA)分别为0. 89和0. 87,相对误差分别为3. 10%和5. 31%,MCR-ANN-CA模型显示了较高的模拟精度。  相似文献   

磴口县地下水空间异质性分析及其对景观格局变化的响应   总被引：1，自引：0，他引：1  

刘建华  于强  YANG Di  岳德鹏  张启斌  武英达 《农业机械学报》2019,50(12):205-211

应用地统计学和地理信息系统方法,分析内蒙古自治区巴彦淖尔市磴口县地下水埋深对景观格局演变的响应。首先,通过半变异函数模型分析了磴口县地下水埋深的空间异质性特征,进而利用克里金插值对研究区2008、2016年的地下水埋深空间分布进行了拟合;其次,基于磴口县2008年与2016年的景观格局分布数据,研究了其景观格局演变特点;最后利用GIS叠加分析手段,将地下水埋深变化与景观格局演变数据进行耦合,分析了地下水埋深对景观格局演变的响应机制。研究结果如下：①空间上,磴口县地下水埋深大体遵循由东北向西南逐渐加深的趋势,研究时段内其空间异质性呈上升趋势,空间异质性中的随机扰动增强。②县域主要景观类型为林地,其次为沙地、裸地与水体,研究时段内建筑用地与水体增加明显,耕地与沙地略有减少。③景观格局演变对地下水埋深有较明显的影响,建筑用地的扩张使其加深,地表灌溉系统的不断完善使其上升。总体来看,磴口县地下水资源利用效率有较明显的提高。  相似文献   

油菜覆膜打孔穴播机打孔装置设计与试验     

廖庆喜  王迪  姚露  林翩  王磊  张青松 《农业机械学报》2020,51(8):62-72

为实现油菜等小粒径作物覆膜种植中膜上均匀打孔的功能,针对传统膜上成穴装置结构庞大复杂、工作时易黏土挑种及撕挑地膜等问题,设计了一种法兰式滚轮与螺纹式圆锥型锥钉组合式结构的打孔装置,确定了其主要结构参数范围;构建了打孔装置运动学模型,分析了打孔锥钉关键点的运动轨迹,确定了膜上打孔过程,并基于轨迹方程分析了膜孔尺寸参数;运用ADAMS运动学仿真,采用四因素三水平正交试验方法,以打孔锥钉顶角、打孔锥钉直径、打孔滚轮半径、机组前进速度为试验因素,以膜孔长度、膜孔间距偏差为试验考核指标,进行了打孔装置结构和运动参数的仿真试验。仿真结果表明:影响膜孔长度的因素主次顺序为打孔滚轮半径、打孔锥钉顶角、打孔锥钉直径、机组前进速度;影响膜孔间距偏差的因素主次顺序为打孔滚轮半径、机组前进速度、打孔锥钉顶角、打孔锥钉直径;基于参数优化,获得较优参数组合为:打孔锥钉顶角53°、打孔锥钉直径16 mm、打孔滚轮半径65 mm、机组前进速度4 km/h。以打孔装置较优结构参数组合进行了田间验证试验,结果表明:打孔装置所打膜孔形状较规则,普遍呈类圆形状,膜孔长度均在18 mm以上,膜孔间距较为均匀,与仿真结果基本一致;各行膜孔长度一致性变异系数为4.98%,各行膜孔间距均匀性变异系数为3.44%。结果表明试验参数组合选取合理,打孔装置符合设计要求。  相似文献   

Processing tomato quality as affected by irrigation scheduling   总被引：5，自引：0，他引：5  

Fabio Favati  Stella Lovelli  Fernanda Galgano  Vito Miccolis  Teodoro Di Tommaso  Vincenzo Candido 《Scientia Horticulturae》2009,122(4):562-571

In Southern Italy the paucity of water is a very important problem and due to the fundamental importance of the water for the processing tomato, in this study the influence of irrigation on processing tomato quality was investigated in the years 2002 and 2003. A hybrid processing tomato (Lycopersicon esculentum L. Mill cv. Ability) was treated with different water regimes obtained combining amount of water and irrigation interval. The effects of the trials were evaluated taking into account the physical and chemical characteristics of the fruits, as well as the content in antioxidants moieties. Furthermore, the relationship among all the quality parameters and the seasonal amount of irrigation water was evaluated.The results, comparing different water regimes obtained combining amount of water and irrigation interval, gave useful indications on the possibility to improve nutritional tomato quality by reducing irrigation water during tomato cropping. In particular, relatively to the Mediterranean areas of tomato cultivation and to the texture of the soil considered in this study, the best compromise between quality and quantity of the processing tomato fruit was achieved both with the extension of the irrigation interval (L40 or L60) and with the limitation of irrigation volume for the second part of the tomato crop cycle (thesis 100-50). Extending the irrigation interval and limiting irrigation volume for the second part of the tomato crop cycle, appeared to be the best management strategy to optimize the yield and nutritional quality of processing tomato.  相似文献   

甘蓝与萝卜属间杂交及其胚挽救技术优化     

扈新民  李锡香  梁燕  方智远  沈镝  邱杨 《中国蔬菜》2009,1(10):7-12

以甘蓝显性雄性不育系C08-11为母本,以萝卜自交系Q07-12为父本进行属间杂交,对杂交子房和胚珠进行离体培养,筛选适合甘蓝与萝卜属间杂种胚挽救的适宜取材时间、培养基及外源添加物。结果表明,胚珠培养优于子房培养;所有处理子房培养仅获得3株杂交苗,取材时间以授粉后第9天为宜,B5培养基中添加合适的生长调节剂、水解酪蛋白和活性炭为子房培养所必需;胚珠培养各处理共获得29株杂交苗,适宜取材时间为蕾期授粉后第14天、花期授粉后第16天,对生长调节剂的需求取决于不同取材时期及培养基。  相似文献   

敌百虫对鲫鱼的急性毒性研究   总被引：3，自引：0，他引：3  

卢彤岩  吴京蔚  王获  王进 《水产学杂志》2008,21(1):68-73

通过96h急性毒性实验敌百虫对鲫鱼的LC50为63.97mg/L,95%可信限为1.81±0.048 mg/L,95%可信区间为57.81～72.11 mg/L.分别选取1/2、1/4、1/8及1/16LC50为染毒浓度,于实验开始后24、48、72及96h采样分析,结果表明随着暴露时间的延长,各浓度组实验鱼血浆胆碱酯酶的活性均有一定的升高,但各浓度组间没有表现出明显的区别.实验剂量下的敌百虫对鲫鱼血浆CST活性有一定的影响,呈现出较为明显的先扬后抑的结果.1/2LC50实验组血浆CAT在实验进行至96h活性明显高于对照组,而其他剂量组在实验期间CAT活性没有明显的改变.本实验中敌百虫对鲫鱼的遗传性在微核率上未表现出差异,但高浓度核异常率在实验24、48h明显高于对照组.  相似文献   

水分亏缺对不同小麦品种N、P、K分布与产量的影响     

李东晓  王红光  张迪  赵国英  贾彬  李雁鸣  李瑞奇 《麦类作物学报》2017,(8):1056-1064

为明确华北地区不同小麦品种在正常和缺水条件下N、P、K的吸收利用特点,进一步实现资源高效利用,选用3个不同生态类型品种(沧麦6001、邯麦9、济麦22),设置相对含水量分别为60%~80%(正常)和40%~60%(亏缺)两个浇灌水平,进行人工气候室箱体栽培试验,测定各小麦品种不同器官N、P、K含量和分配、干物质积累以及对籽粒产量构成要素的影响。结果表明,N、P、K含量和分配具有明显的器官特性,其中籽粒N和P含量显著高于其他部位,K含量最低。水分亏缺限制了沧麦6001籽粒N和K的吸收,同时促进了N和P向籽粒的转运;限制了邯麦9茎秆K的吸收,促进了P向颖壳的转运;限制了济麦22叶片、籽粒P的吸收,同时促进了N向颖壳和籽粒的转运,从而改变了小麦不同部位养分比例平衡以及干物质积累。N、P含量与干物质积累呈显著正相关,K含量与其呈显著负相关,但均未直接影响产量及其构成要素。亏缺灌溉下(亏缺量为24.39mm),邯麦9穗数、产量及济麦22穗数显著降低,而沧麦6001穗数、穗粒数和产量显著提高。因此,适度控制水分并提高营养元素向籽粒的转运效率是提高小麦产量和品质的重要途径。  相似文献   

High water content silk protein-based hydrogels with tunable elasticity fabricated via a Ru(II) mediated photochemical cross-linking method     

Di Zhang  Han Peng  Baochang Sun  Shanshan Lyu 《Fibers and Polymers》2017,18(10):1831-1840

Silk is very promising in the field of biomaterials as a natural biomacromolecule. Silk protein can be made into various forms of materials, including hydrogels. However, silk protein-based hydrogels have not attracted much attention due to its weak mechanical properties. Here, we report high water content silk protein-based hydrogels with tunable elasticity which were fabricated through Ru(II) mediated photochemically cross-linking tyrosine residues in regenerated silk protein. The regenerated silk protein was characterized by Fourier transform infrared spectroscopy (FTIR). The gelation kinetics of the silk protein was studied by rheology measurements. The compressive mechanical properties of the silk protein-based hydrogels was investigated using compressive tests and dynamic mechanical analysis (DMA). Compressive modulus of the hydrogels reached 349±64 MPa at 15 % strain. The fabricated silk protein-based hydrogels were also characterized by Scanning electron microscopy (SEM), revealing an interconnected porous network structure, typical of hydrogels, with an average pore size of approximately 130 μm. Finally, biocompatibility of the silk protein-based hydrogels was demonstrated through cell culture studies using a human fibroblast cell line, HFL1. The reported silk protein-based hydrogels represent a promising candidate for biomaterial applications.  相似文献   

The delay of flowering time in almond: a review of the combined effect of adaptation,mutation and breeding     

Pedro Martínez-Gómez  Angela S. Prudencio  Thomas M. Gradziel  Federico Dicenta 《Euphytica》2017,213(8):197

Regulation of flowering time in almond, as in other Prunus species, is a complex process involving both chill and heat requirements. Following exposure to appropriate consecutive periods of cold and warm temperatures, the buds break dormancy and sprout or flower depending on bud type. To maximize flowering and subsequent vegetative growth and fruit set, chilling and ensuing warm temperature requirements have to be fully satisfied. Because of its potential for very early flowering, flowering time in almond is a major determinant of its adaptation to new environments. In colder regions, Late-flowering is often necessary to avoid frost damage during and just after flowering. Consequently, the selection of delayed flowering times remains an important objective in almond improvement programs. Flowering time is considered a quantitative though highly heritable trait. In addition, a dominant gene (Late flowering, Lb), originally identified in a spontaneous mutation of the Californian almond cultivar ‘Nonpareil’, was also described. The objective of this review is a comparative analysis of the effects of regional adaptation, breeding and mutation on the delay of flowering time in new almond cultivars. Findings indicate that the adaptation of almonds from the Mediterranean basin to colder regions in Northern Europe and America has been mainly achieved through delayed flowering. These adapted late-flowering cultivars have usually been developed by selecting desired quantitative genes within each regional germplasm. Additional progress thus appears achievable with a more comprehensive understanding of the quantitative and qualitative genetics controlling this trait. The use of molecular markers for the early selection of genes conferring late flowering, including both spontaneous mutations as well as unique regional germplasm, should allow development of even later cultivars including ultra-late cultivars flowering as into April.  相似文献