Fungal decomposition of sapwood and heartwood of European aspen,Populus tremula L.     

Camilla Wikstrm 《Forest Pathology》1975,5(6):349-356

In contrast to the woodrotting fungi which can only attack Populus tremula after felling, Phellinus tremulae successfully invades the central part of the living tree. Possible causes for this difference were investigated. It was found that sterile wood samples were decomposed more rapidly by saprophytic fungi than by parasitic fungi. With both types of fungi, heartwood was more resistant to decay than sapwood. It is postulated that living sapwood inhibits infection by most woodrotting fungi, but that P. tremulae can successfully overcome this barrier. This postulate cannot be confirmed by experiments using sterilized wood samples.  相似文献   

Cutter head forces and load cell scanning     

Jan Palmqvist  Matz Lenner  Stig-Inge Gustafsson 《Wood Science and Technology》2003,37(3-4):199-211

Among the machinery found in wood manufacturing industries, routers and planers are the most commonly used. These tools, which many times are mounted on metal cylinders, actually operate only briefly, i. e., when a chip is cut from a piece of wood under process. The rest of the time the knife follows the cylinder surface and a cycloid is formed relative to the work piece, which in turn is fed into the machine. A number of knives are mounted on the cutter, which ascertain that the planed surface will become sufficiently planed and does not show too a wavy pattern. This works fine for high revolutions and low feeding speeds even if problems sometimes occur. Factories, however, naturally want to increase the overall manufacturing speed, which means that at the same time more defects are introduced at the planed surface. These defects are the result of the cutting process. In this paper, we examine, by use of a load cell, how the cutting forces vary during the formation of a wood chip. Wood is not an isotropic material and knots and other anomalies make the evaluation harder. In order to simplify the conditions, experiments are also shown from the cutting of a plastic polymer material as well as Medium Density Fibreboard (MDF). It is shown that the work piece vibrated intensely which littered all output data from the cell. Experience from the experiments however made it possible to design a computerised filter which saved only those registrations which were of interest while the others were set to zero. For beech, the forces were found to be of the magnitude 50 N/cm opposite to the feeding direction while the tranverse forces changed signs and had a magnitude of about 5 N/cm.  相似文献   

Optimising ash wood chairs     

S. I. Gustafsson 《Wood Science and Technology》1997,31(4):291-301

In Sweden, forest research has been emphasised on mainly two species of wood, i.e. pine and spruce. However, we have also a number of hardwoods which could be utilised for furniture manufacturing, cabinets etc. Nowadays, these hardwoods are a slumbering resource in our country. Most of our broad leafed species are found as small stands inside our soft wood forests and hence not utilised in the most profitable way. For example, much of our birch wood is ground to paper fibres even if it would be perfect for high valued veneer. Instead, most of our birch. veneer is imported from Finland. In order to increase the interest for Swedish hardwoods we therefore have started research in this field and have now designed a chair made of ash wood,Fraxinus excelsior. Most chairs are made up of structural elements called indetermined frames which makes it a rather tedious task to analyse the internal forces in the frame. However, by using the Finite Element Method, FEM, it has been possible to reduce this drawback. This paper shows how a chair could be analysed, and designed, by use of methods common in other disciplines than furniture manufacturing. We also present results, in the form of stress-strain diagrams, from tests made on Swedish ash.The author wants to thank NUTEK, the Swedish National Board for Industrial and Technical Development for financial support and professor Larsgunnar Nilsson who provided the FEM-program PCFEMP, which was used for all the calculations. Acknowledgement is also made to Bo Skoog who elaborated all testings of the wood specimens  相似文献   

Shear strength of beam splice joints with glued-in rods     

J?rgen Lauritzen?JensenEmail author  Per-Johan?Gustafsson 《Journal of Wood Science》2004,50(2):123-129

Splitting failure in beam splice joints with glued-in rods parallel to grain in endwood subjected to pure shear is considered. A simple theoretical expression based on beam-on-elastic-foundation theory and quasi-non-linear fracture mechanics is presented for calculation of the joint strength. Tests were conducted on jointed beams in a four-point bending test setup in which the joints were located at the point of pure shear force. Hardwood dowels with a diameter of 12mm and a glued-in length of 120mm were used as rods, and various beam cross sections and dowel configurations were tested. The theory presented is found to agree well with test results in all cases in which the edge distance of the glued-in rods is relatively small. Some test results indicate that the theory may be conservative in case of large edge distances.  相似文献   

Isolation and determination of alpha-dicarbonyl compounds by RP-HPLC-DAD in green and roasted coffee     

Daglia M  Papetti A  Aceti C  Sordelli B  Spini V  Gazzani G 《Journal of agricultural and food chemistry》2007,55(22):8877-8882

Glyoxal, methylglyoxal, and diacetyl formed as Maillard reaction products in heat-treated food were determined in coffee extracts (coffee brews) obtained from green beans and beans with different degrees of roast. The compounds have been reported to be mutagenic in vitro and genotoxic in experimental animals in a number of papers. More recently, alpha-dicarbonyl compounds have been implicated in the glycation process. Our data show that small amounts of glyoxal and methylglyoxal occur naturally in green coffee beans. Their concentrations increase in the early phases of the roasting process and then decline. Conversely, diacetyl is not found in green beans and forms later in the roasting process. Therefore, light and medium roasted coffees had the highest glyoxal and methylglyoxal content, whereas dark roasted coffee contained smaller amounts of glyoxal, methylglyoxal, and diacetyl. For the determination of coffee alpha-dicarbonyl compounds, a reversed-phase high performance liquid chromatography with a diode array detector (RP-HPLC-DAD) method was devised that involved the elimination of interfering compounds, such as chlorogenic acids, by solid phase extraction (SPE) and their derivatization with 1,2-diaminobenzene to give quinoxaline derivatives. Checks of SPE and derivatization conditions to verify recovery and yield, respectively, resulted in rates of 100%. The results of the validation procedure showed that the proposed method is selective, precise, accurate, and sensitive.  相似文献   

Virulence studies of Swedish net blotch isolates (Drechslera teres) and identification of resistant barley lines     

Rickard Jonsson  Tomas Bryngelsson  Mats Gustafsson 《Euphytica》1997,94(2):209-218

Six Swedish and one Canadian single spore isolate of Drechslera teres f. teres were used to screen 109 barley lines for disease resistance and to select a differential set of barley lines for use in assessing pathogen virulence. A large variation for net blotch resistance was found among the 109 barley lines which were classified into four groups, those showing: 1) only resistant reactions; 2) differential reactions; 3) only intermediate reactions and 4) only susceptible reactions. The European commercial varieties included, showed susceptibility to all Swedish isolates, but a few were resistant to the Canadian isolate. The 18- member differential set separated 25 Swedish and two Canadian isolates of D. teres into 14 pathotypes, three of which made up 59% of the isolates. Only one barley differential (CI 9776) was resistant to all net form isolates. Host selection on the pathogen seems to be present as all six isolates obtained from cv. Golf belonged to the same pathotype and 4 of 5 isolates from cv. Karin shared the same virulence pattern. The net form of net blotch (D. teres f. teres) predominated in the sampled regions and only one of 26 Swedish isolates was of the spot form (D. teres f. maculata). This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

Characterization of commercial kava-kava herbal drug and herbal drug preparations by means of nuclear magnetic resonance spectroscopy   总被引：1，自引：0，他引：1  

Bilia AR  Bergonzi MC  Lazari D  Vincieri FF 《Journal of agricultural and food chemistry》2002,50(18):5016-5025

The efficiency of one- and two-dimensional NMR experiments in characterizing the content of the constituents of both herbal drugs and herbal drug preparations is demonstrated for kava-kava. These experiments directly detect active constituents represented by kavalactones in both a finely powdered herbal drug and a commercial extract. In addition, NMR spectroscopy can detect all other compounds present in the extract. As previously evidenced, NMR experiments can represent a generally applicable technique for rapid screening and are a complement to the classical analytical techniques such as high-performance thin-layer chromatography, high-performance liquid chromatography, capillary gas chromatography, and electrophoresis. These experiments can be considered a very simple and fast analytical method to obtain a fingerprint of the herbal drugs and their preparations, and to quantify the content of the active principles of the extract.  相似文献   

Use of a substrate/alliinase combination to generate antifungal activity in situ   总被引：5，自引：0，他引：5  

Fry FH  Okarter N  Baynton-Smith C  Kershaw MJ  Talbot NJ  Jacob C 《Journal of agricultural and food chemistry》2005,53(3):574-580

Allicin, an active ingredient of garlic, possesses a range of antimicrobial properties. Unfortunately, certain properties of the compound, such as chemical instability and low miscibility with water, have hampered its practical use in the past. Here, we show that it is possible to use a binary system consisting of the plant enzyme alliinase and its substrate alliin to generate allicin, and hence antifungal activity, in situ. During application, the two inactive components generate compounds that inhibit growth and infection-related development of the rice blast fungus Magnaporthe grisea. It is therefore possible to "trigger" biological activity in a controlled, yet effective manner. Apart from circumventing many of the drawbacks of allicin, this binary system has additional important advantages, such as low toxicity of its individual components and selective activation. Importantly, alliinase is also able to use different substrates, therefore paving the way to a range of novel, binary antimicrobial systems with custom-made chemical and biochemical properties.  相似文献   

Cassini measurements of cold plasma in the ionosphere of Titan     

Wahlund JE  Boström R  Gustafsson G  Gurnett DA  Kurth WS  Pedersen A  Averkamp TF  Hospodarsky GB  Persoon AM  Canu P  Neubauer FM  Dougherty MK  Eriksson AI  Morooka MW  Gill R  André M  Eliasson L  Müller-Wodarg I 《Science (New York, N.Y.)》2005,308(5724):986-989

The Cassini Radio and Plasma Wave Science (RPWS) Langmuir probe (LP) sensor observed the cold plasma environment around Titan during the first two flybys. The data show that conditions in Saturn's magnetosphere affect the structure and dynamics deep in the ionosphere of Titan. The maximum measured ionospheric electron number density reached 3800 per cubic centimeter near closest approach, and a complex chemistry was indicated. The electron temperature profiles are consistent with electron heat conduction from the hotter Titan wake. The ionospheric escape flux was estimated to be 10(25) ions per second.  相似文献   

Hotspots in cold climate: Conservation value of woodland key habitats in boreal forests     

Jonna Timonen  Lena Gustafsson  Janne S. Kotiaho  Mikko Mönkkönen 《Biological conservation》2011,(8):2061-2067

The concept of Woodland Key Habitats (WKH, small-scaled presumed hotspots of biodiversity) has become an essential component of biodiversity conservation in Fennoscandian and Baltic forests. There have been debates over the importance of WKHs in relation to the conservation of biodiversity in production forests. We applied a systematic review protocol and meta-analysis to summarize knowledge on comparisons of biodiversity qualities, such as dead wood and species richness, between WKHs and production forests in relevant countries. We also summarized the knowledge on the impact of edge effects by comparing WKHs surrounded by production forests to WKHs surrounded by clear cuts. Studies had been conducted in Finland, Norway and Sweden. Based on our meta-analysis, WKHs seem to be relative hotspots for dead wood volume, diversity of dead wood, number of species and number of red-listed species. There were some differences also between countries in these biodiversity qualities. Only two studies compared WKHs surrounded by production forests and clear cuts, respectively. Hence, the capability of WKHs to maintain their original species composition and support species persistence over time remains to be addressed, as well as their role in relation to other conservation tools.  相似文献