C/N ratio control and substrate addition for periphyton development jointly enhance freshwater prawn Macrobrachium rosenbergii production in ponds     

M. Asaduzzaman  M.A. Wahab  M.C.J. Verdegem  S. Huque  M.A. Salam  M.E. Azim 《Aquaculture (Amsterdam, Netherlands)》2008,280(1-4):117-123

The present research investigated the effect of carbon/nitrogen ratio (C/N ratio) control in ponds with or without substrate addition for periphyton development on production of giant freshwater prawn. C/N ratios of 10, 15 and 20 were investigated in 40 m^− 2 ponds stocked with 2 prawn juveniles (5.023 ± 0.02 g) m^− 2 with or without added substrates for periphyton development. The various treatment combinations of C/N ratio and periphyton substrate addition are abbreviated as ‘CN10’, ‘CN15’, ‘CN20’, ‘CN10 + P’, ‘CN15 + P’ and ‘CN20 + P’, P representing periphyton substrate. A locally formulated and prepared feed containing 30% crude protein with C/N ratio10 was applied. Tapioca starch was used as carbohydrate source for manipulating C/N ratio and applied to the water column separately from the feed. Increasing the C/N ratio from 10 to 20 reduced (P < 0.001) the total ammonia-nitrogen (TAN), nitrite–nitrogen (NO₂–N) and nitrate–nitrogen (NO₃–N) in water column and total Kjeldahl nitrogen (TKN) in sediment. The addition of substrates only influenced the NO₂–N concentration in the water column (P < 0.001). Increasing the C/N ratio raised the total heterotrophic bacterial (THB) population in the water column, sediment and periphyton (P < 0.001). It also increased the dry matter (DM), ash free dry matter (AFDM), and chlorophyll a content of periphyton (P < 0.001). The lowest specific growth rate (SGR), the highest food conversion ratio (FCR), and the lowest protein efficiency ratio (PER) were recorded in treatment CN10 (P < 0.05). The addition of substrates did not influence size at harvest (P > 0.05) but improved the survival from 62.8 to 72% (P < 0.001). Increasing the C/N ratio from 10 to 20 increased the net yield by 40% and addition of substrate increased the net yield by 23%. The combination of C/N ratio control and substrate addition increased the net yield by 75% from 309 (CN10) to 540 (CN20 + P) kg ha^− 1 (120 days)^− 1. This 75% higher production concurred with (1) a lower inorganic nitrogen content in the water column, (2) a higher THB abundance supplying additional single cell protein to augment the prawn production, and (3) an improved periphyton productivity and quality.  相似文献   

Antimicrobial activity of Securinega leucopyrus     

L. Md. Bakshu  A. Jeevan Ram  R. R. Venkata Raju   《Fitoterapia》2001,72(8)

Extracts of the leaves of Securinega leucopyrus exhibited a broad spectrum of antimicrobial activity.  相似文献   

孟加拉涝原地区村林居住的宗教社团偏爱的乔木和灌木树种及使用的造林材料研究     

Md.DaneshMiah MohammadMoshiurRahman 《林业研究》2004,15(1):55-60

2002年1月至6月对孟加拉涝原地区两个不同的宗教部落(印度教和穆斯林教)的传统家园森林进行了探索性研究，包括印度教和穆斯林教社团对树种(乔木和灌木)的偏爱度、类似性、造林材料及来源、植树地点和间距。研究发现Mangifera indica作为乔木树种，Ocimum sanctum作为灌木树种为印度教社团最喜爱的树种；Artocarpus heterophyllus和Lawsonia inermis分别为穆斯林社团最喜爱乔木树种和灌木树种。两中不同宗教社团选择乔木数种的相同性为86．57％，灌木树种为78．48％。两个宗教部落使用种子和苗木作为造林材料最多。乔木树种的造林材料主要来自家园(39％)灌木树种主要来自自然界(40％)。表3参27。  相似文献   

Reckoning social forestry in Bangladesh: policy and plan versus implementation   总被引：2，自引：0，他引：2  

Muhammed  Nur; Koike  Masao; Sajjaduzzaman  Md.; Sophanarith  Kim 《Forestry》2005,78(4):373-383

The history of scientific forest management in Bangladesh datesback to the nineteenth century with defined forest policiesand laws. Due to various socio-economic and socio-politicalfactors, forest cover of the country reduced drastically andall such policy initiatives proved ineffective. Although traditionalforest management objectives covered a wide range from economicbenefit to ecological stability, these have never been attainedfully. Huge population and limited land area compelled policymakers to think about alternatives to traditional forest management.One alternative, social forestry, was introduced in Bangladeshin early 1980s and has proved to be extremely successful. Whiletraditional forest management resulted in a net loss of forestresource cover, social forestry on the other hand, is playinga vital role in the expansion of forest cover (40 387 ha ofnew forest cover and 48 420 km new strip plantation since themid-1980s) benefiting thousands of poor people. Results showthat during the last four years (2000–2003) more than23 000 individuals benefited from the final felling of differentsocial forestry plantations (woodlot, agroforestry and stripplantation). This generated a total income of US$ 5.6 millionfor the government and US$ 5.3 million for participants plusUS$ 1.2 million for the Tree Farming Fund – a 10 per centdepository reserve to sustain the practice in the long run.Although average individual final returns (US$ 223 person^–1)are not so attractive, some people got about US$ 5000 to US$8500 from final felling, sufficient to improve their standardof living and social position. Despite the success so far achieved,social forestry in Bangladesh still suffers from various institutionaldeficiencies like organization, skilled manpower, legitimateusufruct rights, peoples' participation from policy to implementationand clear budgetary arrangements. Besides, until now the roleof relevant actors is not well defined in all the steps of socialforestry practice in Bangladesh. Unless the participants aregiven clear legitimate usufruct rights, they will remain scepticaltowards this programme. They should have good and meaningfulaccess from planning to implementation. In the context of institutionaldevelopment, there are governmental policy guidelines and a20-year Master Plan for Bangladesh. Although some steps havebeen partially completed, there is still much to do to complywith forest policy guidelines and the Master Plan. It is shownthat in the last seven years (1995/96–2001/2002) onlyUS$ 15.41 million a^–1 has actually been spent againstan allocated sum of US$ 68.37 million a^–1. Therefore,if the intention is to institutionalize social forestry in Bangladesh,government and policy makers should actively come forward. Otherwisethe full potential of social forestry in Bangladesh will notbecome a reality.  相似文献   

Quantification and Understanding of Above and Belowground Biomass in Medium Saline Zone of the Sundarbans,Bangladesh: The Relationships with Forest Attributes     

Md. Salim Azad  Md. Kamruzzaman  Akira Osawa 《Journal of Sustainable Forestry》2020,39(4):331-345

ABSTRACT

The relationship between stand attributes and biomass accumulation pattern in a mangrove forest has been intensively studied in this study. We assessed above (AGM) and belowground mass (BGM) and examined the relationship between forest attributes and aboveground mass in the Sundarbans, Bangladesh. The study was conducted with 18 plots having total area of 1.08 ha. The mean AGM and BGM of the study sites were 234.08 and 132.85 Mg ha^?1 respectively. H. fomes contributed the highest amount (82.9% of total AGM and 80.53% of total BGM) of above (193.56 Mg ha^?1) and belowground mass (107.09 Mg ha^?1) at the study site. Our study revealed structural attributes (tree diameter, height, and basal area) positively correlated with AGM. In contrast, species richness and species diversity negatively correlated with AGM. Our study indicated that lack of positive relationship between species diversity and AGM which may be attributable to high AGM of the dominant species (H. fomes) and may have a considerable consequence in AGM of the study area. Thus, maintaining large trees (DBH and height) rather than species diversity in the Sundarbans mangrove forest might be an effective approach for increasing aboveground mass.  相似文献   

Effect of intermittent heat treatment on crystallinity in wood cellulose     

Md. Tariqur Rabbani Bhuiyan  Nobuyuki Hirai  Nobuo Sobue 《Journal of Wood Science》2001,47(5):336-341

The effect of intermittent heat treatment on cellulose crystallites in wood was studied to evaluate quantitatively the changes of crystallinity induced by intermittent and continuous heating. The changes in crystallinity were found to be strongly affected by the intermittent heat treatment. The increased crystallinity, the width of the crystals, and the piezoelectric properties were the same for the first intermittent heating as for continuous heating. Further intermittent heating for the same time duration and temperature had no effect on the above properties, probably due to the stopping of the thermal reaction during the interval. Our results suggested that intermittent heat treatment has certain critical cooling temperatures that stop the thermal reaction and are closely related to the duration of the interval. Samples once exposed to a certain duration of heat treatment and then cooled need more time, about twice that of the first duration of intermittent heating compared with continuous heating, to reach maximum crystallinity in wood cellulose.  相似文献   

Compressive deformation of wood impregnated with low molecular weight phenol formaldehyde (PF) resin II: effects of processing parameters   总被引：1，自引：0，他引：1  

Md Iftekhar?ShamsEmail author  Hiroyuki?Yano 《Journal of Wood Science》2004,50(4):343-350

To obtain high-strength phenol formaldehyde (PF) resin-impregnated compressed wood at low pressing pressure, the effects of resin content, preheating temperature, pressing temperature, and pressing speed on the compressive deformation of oven-dried low molecular weight PF resin-impregnated wood was investigated. With an increase of PF resin content, the Youngs modulus of the cell wall perpendicular to the fiber direction decreases, and collapse-initiating pressure decreases linearly with the Youngs modulus. This indicates that the occurrence of cell wall collapse is strain-dependent. By increasing preheating temperatures, the collapse-initiating pressure increases due to the increment of the Youngs modulus of the cell wall. An increase in pressing temperature results in the thermal softening of the cell wall and causes collapse at a lower pressure. The wood is compressed effectively despite accelerated resin curing. The pressing speed significantly affects the viscoelastic deformation of the cell wall and the wood is well deformed with decreasing pressing speed, although the differences in density and mechanical properties are relatively small after a pressure-holding period of 30min. In all the parameters examined in this study, the Youngs modulus and bending strength increase with increasing density.  相似文献   

Intra-specific patterns of δ13C,growth and wood density variation at sites of contrasting precipitation with implications for modelling carbon sequestration of tropical tree species     

Halder  Nirmol Kumar  Chowdhury  Md. Qumruzzaman  Fuentes  David  Possell  Malcolm  Merchant  Andrew 《Agroforestry Systems》2021,95(8):1429-1443

Agroforestry Systems - Tropical agroforestry practices play a crucial role in mitigating global climate change by absorbing CO2 from the atmosphere through photosynthesis and storing carbon in...  相似文献   

CO2 elevation and soil warming reduce cold hardiness of jack pine under photoperiods of seed origin and latitudes of potential migration     

Newaz  Shah Md.  Dang  Qing-Lai  Man  Rongzhou 《New Forests》2021,52(5):777-790

New Forests - Climate change is predicted to cause northward migration of boreal tree species. However, the success of such a migration will be determined by trees’ ability to acclimate to...  相似文献   

Application of Biofloc Technology for the culture of Heteropneustes fossilis (Bloch) in Bangladesh: stocking density,floc volume,growth performance,and profitability     

Shamsuddin  Md  Hossain  M. Belal  Rahman  Moshiur  Kawla  Mst. Salamun  Shufol  Md. Badiul Alam  Rashid  Muhammad Mamunur  Md. Asadujjaman  Rakib  Md. Refat Jahan 《Aquaculture International》2022,30(2):1047-1070

Though Biofloc Technology is a new concept in Bangladesh, it provides advantages for improving aquaculture production in many countries, leading to achieve sustainable development goals. The objectives of this study were to determine the effects of stocking densities on the growth performance of stinging catfish (Heteropneustes fossilis) under Biofloc Technology and assess the economic prospects and business feasibilities. Fingerlings were stocked in unique 5000-L tanks with three stocking densities, i.e., 3500 fish/tank (Treatment-I), 4000 fish/tank (Treatment-II), 4500 fish/tank (Treatment-III). The treatments showed significant differences (P?<?0.05) considering the species-specific growth rate, feed conversion ratio, and protein efficiency ratio. Treatment-I had significantly ((P?<?0.05) higher final biomass (29.51 ± 0.04 kg/m³) than the other treatments. The present findings revealed that using a lower stocking density, the Biofloc Technology reduced ammonia (NH₃), nitrite (NO₂), nitrate (NO₃), TDS, and floc volume but significantly increased the dissolved oxygen. As a result, Treatment-I had generated significantly higher net income (BANGLADESHI TAKA—BDT 86,278.90) over the other treatments. Moreover, the NPV, net BCR, and RoR with 4% and 9% opportunity cost were also significantly higher in Treatment-I than other treatments. The internal rate of return (IRR) and SWOT analysis index indicates that investing in Biofloc Technology is far superior, and a stocking density of 3500 fish/tank (Treatment-I) resulted in a faster investment return.

  相似文献