Assessing raindrop impact energy at the forest floor in a mature Japanese cypress plantation using continuous raindrop-sizing instruments     

Kazuki?NankoEmail author  Norifumi?Hotta  Masakazu?Suzuki 《Journal of Forest Research》2004,9(2):157-164

The raindrop size distribution of throughfall and open rainfall was monitored continuously during a rainfall event using laser raindrop-sizing instruments (LD gauges), in order to calculate the raindrop impact energy in a plantation of mature Japanese cypress (Chamaecyparis obtusa), where surface erosion at the forest floor had been a problem. Data from two rainfall events were analyzed. The LD gauges recorded qualitative raindrop size distribution, and the capture rate during each rainfall event was used to manipulate raindrop data quantitatively. Throughfall and open rainfall comparisons revealed several important differences. First, throughfall raindrops were fewer in number and larger in size than open rainfall drops. In one rainfall event, for example, throughfall raindrops were less than one-fifth as frequent as open rainfall raindrops; in addition, the maximum throughfall raindrop diameter was 6.35mm compared to 3.31mm for open rainfall raindrops. Second, throughfall raindrops that were larger than the largest open rainfall raindrops comprised 63.8% of the throughfall precipitation by volume. Third, total raindrop impact energy from throughfall was over twice that of open rainfall. Moreover, comparison of throughfall events implied that throughfall raindrops did not always have a uniform distribution between different events or among different periods of time in one rainfall event, in contrast to findings in previous studies which showed that throughfall raindrops had a uniform size distribution independent of rainfall intensity. It is possible that an abrupt transition of throughfall intensity from low to high changes the distribution of throughfall raindrops.  相似文献   

Relationship between fracture toughness and acoustic emission during cleavage failure in adhesive joints     

M. Suzuki  A. P. Schniewind 《Wood Science and Technology》1987,21(2):121-130

Summary Fracture toughness in mode I was determined for wood bonded with various adhesive systems. Tapered double-cantilever beam (TDCB) specimens were used, with attached transducer connected to instrumentation for monitoring acoustic emission. Adhesives used fro bonding the TDCB specimens included urea-formaldehyde resin, phenol-resorcinol resin, and emulsion polymer isocyanate, among others. Test parameters measured included critical load for cleavage fracture and number of events (stress waves) emitted, from which fracture toughness and cumulative count of acoustic emission were computed. It was found that there was a well defined, linear relation between fracture toughness and cumulative counts of acoustic emission per fracture area. The fracture toughness values of systems containing polyvinyl acetate and of epoxy resin were larger than those of thermosetting resins such as urea-or phenol formaldehyde. The high fracture toughness imparted by polyvinyl acetate was attributed to viscous movement of linear molecular chain segments, as compared with the more brittle behavior of the crosslinked molecular structure of such resins as ureaformaldehyde.  相似文献   

Vertical profiles of environmental factors within tropical rainforest, Lambir Hills National Park, Sarawak, Malaysia     

Tomo’omi Kumagai  Koichiro Kuraji  Hironori Noguchi  Yuri Tanaka  Katsunori Tanaka  Masakazu Suzuki 《Journal of Forest Research》2001,6(4):257-264

Environmental factors, such as global solar radiation, wind speed, air temperature, humidity, and CO₂ concentration, were measured above and within the canopy of a tropical rainforest in Lambir Hills National Park, Sarawak, Malaysia. Few data concerning the environment of this forest have been reported. Intensive observations were carried out in 1998, 1999, and 2000 with the following results: (1) The fraction of global solar radiation reaching the upper layer of the canopy varied with global solar radiation above the canopy. Even though the global solar radiation above the canopy fluctuated, the fraction of that reaching the lower canopy and the ground was constantly approximately 5%. (2) The fraction of wind speed reaching each layer of the canopy increased with wind speed above the canopy. Little wind was usually present at the lower canopy. (3) The daytime air temperature at the canopy top was higher than that near the ground. The maximum difference between the air temperature at the canopy top and that at the ground was about 5°C, and the diurnal temperature ranges at the canopy top and those at the ground were about 8°C and about 5°C, respectively. The highest daytime water vapor pressure occurred within the canopy and particularly near the ground. Vertical gradients of water vapor pressure during the day were steep, probably because of high transpiration. (4) In the 1998 observation the minimum and the maximum CO₂ concentrations were 360 ppm in the day and 450 ppm at night, while in the 2000 observation the minimum and the maximum CO₂ concentrations were 350 ppm in the day and 540 ppm at night. The higher CO₂ concentration in the daytime and the lower concentration at night observed during the 1998 observation period were probably due to reduced photosynthesis and soil respiration caused by exceptional dry conditions during the observation period.  相似文献   

Stereochemistry and biosynthesis of 8-O-4′ neolignans in Eucommia ulmoides: diastereoselective formation of guaiacylglycerol-8-O-4′-(sinapyl alcohol) ether     

Nattaya Lourith  Takeshi Katayama  Toshisada Suzuki 《Journal of Wood Science》2005,51(4):370-378

Stereochemistry and biosynthesis of guaiacylglycerol-8-O-4′-(sinapyl alcohol) ether (GGSE), an 8-O-4′ neolignan, which consists of coniferyl and sinapyl alcohol moieties, in Eucommia ulmoides were investigated. Four 8-O-4′ neolignans, GGSE, syringylglycerol-8-O-4′-(coniferyl alcohol) ether (SGCE), guaiacylglycerol-8-O-4′-(coniferyl alcohol) ether (GGCE), and syringylglycerol-8-O-4′-(sinapyl alcohol) ether (SGSE), were synthesized. Their erythro and threo diastereomers were separated through acetonide derivatives, intermediates of the synthesis, and identified by means of nuclear magnetic resonance (NMR) spectroscopy. All of the erythro-acetonide derivatives have larger coupling constants (ca 9 Hz) for the C₇-H resonances than those of the threo ones (1.5–2 Hz). In the case of the four 8-O-4′ neolignans, the C₇-H coupling constants of the threo-isomers are not smaller than those of the erythro ones. GGSE isolated previously from this plant was identified as the erythro isomer by comparison of the ¹³C-NMR data with synthetic erythro-GGSE and threo-GGSE and the other 8-O-4′ neolignans mentioned as above. Administration of a mixture of [8-¹⁴C]coniferyl alcohol and [8-¹⁴C]sinapyl alcohol to excised shoots of E. ulmoides was carried out and the incorporation of ¹⁴C into erythro-[¹⁴C]GGSE was found to be higher than that in threo-[¹⁴C]GGSE. The occurrence of diastereoselective formation of erythro-GGSE by cross coupling of coniferyl and sinapyl alcohols is suggested.Part of this paper was presented at the 47th Lignin Symposium, Fukuoka, October 2002 and the 53rd Annual Meeting of the Japan Wood Research Society, Fukuoka, April 2003  相似文献   

Effect of particle shape on linear expansion of particleboard   总被引：2，自引：0，他引：2  

Kohta Miyamoto  Susumu Nakahara  Shigehiko Suzuki 《Journal of Wood Science》2002,48(3):185-190

Hinoki (Japanese cypress) strand with 0.6mm thickness was hammer-milled to prepare three types of particles that had the same thickness but different lengths and widths. Screen analysis and image analysis were conducted to evaluate the shape and distribution of the particle dimensions. Laboratory-scale particleboards were fabricated at three density levels using these particles. To determine the true effect of particle shape on the linear expansion (LE) of the board, these boards exhibited almost the same temperature behavior during pressing, the same density profile, and the same bending properties at each board density level. LE at 40°C and 90% relative humidity of the board was found to be affected by the particle shape. The board composed of small particles showed a larger LE at the same density level. It was considered that the out-of-plane orientation angle of the particles affected the LE of the boards. Thickness swelling and internal bond strength were also affected by the particle shape.Part of this report was presented at the 50th annual meeting of the Japan Wood Research Society, Kyoto, April 2000  相似文献   

Lignan production inDaphne odora cell cultures     

Tomoya Okunishi  Naohiro Takaku  Patcharawadee Wattanawikkit  Norikazu Sakakibara  Shiro Suzuki  Fukumi Sakai  Toshiaki Umezawa  Mikio Shimada 《Journal of Wood Science》2002,48(3):237-241

Lignan production in callus and cell suspension cultures ofDaphne odora is reported for the first time. The cell suspension culture produced pinoresinol, lariciresinol, secoisolariciresinol, matairesinol, and wikstromol. The production of matairesinol in the cell suspension culture was much higher than that inDaphne odora stem tissues.Part of this report was presented at the 51th annual meeting of the Japan Wood Research Society, Tokyo, April 2001  相似文献   

New lignan, isoactifolin, fromChamaecyparis obtusa cv. Breviramea     

Naohiro Takaku  Keigo Mikame  Tomoya Okunishi  Shiro Suzuki  Toshiaki Umezawa  Mikio Shimada 《Journal of Wood Science》2001,47(6):493-496

A new lignan isoactifolin was isolated from young shoots (with leaves) ofChamaecyparis obtusa cv. Breviramea. The structure of the compound was determined based on spectroscopic evidence.Parts of this report were presented at the 44th lignin symposium, Gifu, October 1999  相似文献   

Stereochemistry of matairesinol formation by <Emphasis Type="Italic">Daphne</Emphasis> secoisolariciresinol dehydrogenase     

Tomoya?Okunishi  Norikazu?Sakakibara  Shiro?Suzuki  Toshiaki?UmezawaEmail author  Mikio?Shimada 《Journal of Wood Science》2004,50(1):77-81

Secoisolariciresinol dehydrogenase activity was detected for the first time from Daphne odora and Daphne genkwa (Thymelaeaceae), which are known to produce optically pure (+)-matairesinol. In sharp contrast, (–)-matairesinol was formed selectively over the (+)-antipode by the secoisolariciresinol dehydrogenase preparation from both D. odora callus and D. genkwa shoots.  相似文献   

Nickel-catalyzed carbonization of wood for coproduction of functional carbon and fluid fuels I: production of crystallized mesoporous carbon     

Tsutomu Suzuki  Kyoko Suzuki  Yukio Takahashi  Mitsuhiro Okimoto  Tetsuo Yamada  Noriyasu Okazaki  Yuichi Shimizu  Masashi Fujiwara 《Journal of Wood Science》2007,53(1):54-60

Japanese larch wood loaded with nickel (1%–4%) alone or with nickel and calcium (0.25%–1.5%) was carbonized at 800°–900°C for 0–120min with a heating rate of 5°–20°C min⁻¹ in a helium flow of 5.8−46.4 ml STP cm⁻² min⁻¹ to examine the influence of these variables on the crystallization of carbon (the formation of T component) and the development of mesoporosity. From the obtained results, reaction conditions suitable for effective production of carbon with the dual functions of adequate electroconductivity and adsorption capacity in liquid phase were established, thereby explaining the factors that govern the process. It was also confirmed that mesopore having a diameter of about 4 nm was selectively produced at the cost of specific (BET) surface area in parallel with the formation of T component. This result provided good insight into how the simultaneous dual function could be realized.  相似文献   

Fundamental studies on wood/cellulose-plastic composites: effects of composition and cellulose dimension on the properties of cellulose/PP composite   总被引：2，自引：0，他引：2  

Rashmi Kumari  Hirokazu Ito  Masahiro Takatani  Miho Uchiyama  Tadashi Okamoto 《Journal of Wood Science》2007,53(6):470-480

Although wood/cellulose-plastic composites (WPC) of low wood/cellulose content have been more accepted worldwide and are promoted as low-maintenance, high-durability building products, composites containing high wood/cellulose content are not yet developed on an industrial scale. In this study, flow properties, mechanical properties, and water absorption properties of the compounds of cellulose microfiber/polypropylene (PP) and maleic anhydride-grafted polypropylene (MAPP) were investigated to understand effects of the high cellulose content and the dimensions of the cellulose microfiber. The molding processes studied included compression, injection, and extrusion. It was found that fluidity is not only dependent on resin content but also on the dimension of the filler; fluidity of the compound declined with increased fiber length with the same resin content. Dispersion of the composite was monitored by charge-coupled device (CCD) microscope. Increasing the plastic content in the cellulose-plastic formulation improved the strength of mold in addition to the bond development between resin and filler, and the tangle of fibers. The processing mode affected the physicomechanical properties of the cellulosic plastic. Compression-molded samples exhibited the lowest modulus of rupture (MOR) and modulus of elasticity (MOE) and the highest water absorption, while samples that were injection-molded exhibited the highest MOR (70 MPa) and MOE (7 GPa) and low water absorption (2%).  相似文献