Surface deterioration of wood-flour polypropylene composites by weathering trials   总被引：1，自引：0，他引：1  

Makoto Kiguchi  Yutaka Kataoka  Hiroshi Matsunaga  Koichi Yamamoto  Philip D. Evans 《Journal of Wood Science》2007,53(3):234-238

The market for wood-fiber plastic composites (WPCs) is expanding rapidly in many countries including Japan, where WPCs are mainly used for exterior products. In such applications, WPCs undergo undesirable color change, chalking, and shrinkage and swelling, and accordingly there is a need to better understand the mechanisms responsible for the weathering of WPC and develop methods of improving their weathering resistance. In this study, weatherability of WPC was assessed by natural and accelerated weathering trials. Discoloration (whitening) of WPC during exposure was caused by degradation of both wood and plastic. Darker color pigments as additives improved the color stability of WPC; however, chalking on the surfaces still occurred. The color stability of WPC was improved by application of exterior coatings. Preweathering of WPC (before coatings were applied) increased the absorption of coatings by the WPC and had a positive effect on the color stability and prevented chalking of the composites. Parts of this study were presented at the IUFRO XXII World Congress Meeting, Brisbane, August 2005 and the IAWPS 2005, Yokohama, November 2005  相似文献   

Mechanical behavior of the crystal lattice of natural cellulose in wood under repeated uniaxial tension stress in the fiber direction     

Takahisa Nakai  Hiroyuki Yamamoto  Tetsuya Nakao  Masatoshi Hamatake 《Wood Science and Technology》2006,40(8):683-695

This study investigated the relationship between the cellulose crystal lattice strain (crystalline region) and the macroscopic surface strain in specimens of Chamaecyparis obtusa wood under repeated uniaxial tension stress in the fiber direction. Changes in the strain of the crystal lattice were measured from the peak of (004) reflection using the transit X-ray method. The macroscopic surface strain of each specimen was measured with a strain gauge. In both loading and unloading, the surface strain changed linearly with changes in stress. However, crystal lattice strain was not linear but exhibited changes along a curve with changing stress. Under stressed conditions, the crystal lattice strain was always less than the surface strain, regardless of the frequency of repetition in the loading and unloading cycle. The ratio of the crystal lattice strain to the surface strain showed a negative correlation for stress in both loading and unloading. That is, the ratio decreased with increasing stress, and finally tend to converge to a specific value. The ratio (I/I ₀) between the diffracted intensity (I ₀) in the (004) plane in the unloaded condition and the diffracted intensity (I) in the (004) plane in the loaded condition tend to converge on a specific value with increasing frequency of repetition. When the substantial tension Young’s modulus of the wood in the longitudinal direction decreased, the ratio of the strain of the crystal lattice to the surface strain also decreased. Moreover, the ratio decreased with increasing microfibril angle of the specimen.  相似文献   

Predicting individual stem volumes of sugi (Cryptomeria japonica D. Don) plantations in mountainous areas using small-footprint airborne LiDAR     

Tomoaki Takahashi  Kazukiyo Yamamoto  Yoshimichi Senda  Masashi Tsuzuku 《Journal of Forest Research》2005,10(4):305-312

This study investigated which predictor variables with respect to crown properties, derived from small-footprint airborne light detection and ranging (LiDAR) data, together with LiDAR-derived tree height, could be useful in regression models to predict individual stem volumes. Comparisons were also made of the sum of predicted stem volumes for LiDAR-detected trees using the best regression model with field-measured total stem volumes for all trees within stands. The study area was a 48-year-old sugi (Cryptomeria japonica D. Don) plantation in mountainous forest. The topographies of the three stands with different stand characteristics analyzed in this study were steep slope (mean slope ± SD; 37.6° ± 5.8°), gentle slope (15.6° ± 3.7°), and gentle yet rough terrain (16.8° ± 7.8°). In the regression analysis, field-measured stem volumes were regressed against each of the six LiDAR-derived predictor variables with respect to crown properties, such as crown area, volume, and form, together with LiDAR-derived tree height. The model with sunny crown mantle volume (SCV) had the smallest standard error of the estimate obtained from the regression model in each stand. The standard errors (m³) were 0.144, 0.171, and 0.181, corresponding to 23.9%, 21.0%, and 20.6% of the average field-measured stem volume for detected trees in each of these stands, respectively. Furthermore, the sum of the individual stem volumes, predicted by regression models with SCV for the detected trees, occupied 83%–91% of field-measured total stem volumes within each stand, although 69%–86% of the total number of trees were correctly detected by a segmentation procedure using LiDAR data.  相似文献   

Effects of thinning on wind damage in Pinus thunbergii plantation ——Based on theoretlcal derlvation of risk—ratios for assessing wind damage     

ZHUJiao-jun LIFeng-qin CondaYutaka TakeshiMatsuzaki MasashiYamamoto 《林业研究》2003,14(1):1-8

Based on paper of “Theoretical derivation of risk-ratios for assessing wind damage in coastal forest“,wind damage in the pine coasteal forest,which was thinned at four levels in December of 1997,was investigated for four successive growing seasons.Besides wind damage,the wind profiles outside and inside the coastal forest stand and the distributions of optical stratification porosity (OSP) were also observed.Based on these data,risk-ratios of wind damage for both individual trees and stands were estimated according to the methods developed in “Theoretical derivation of risk-ratios for assessing wind damage in a coastal forest“.The results showed that risk-ratios of wind damage,which were calculated from the meen height and diameter only and from the combination of wind and stand sructure profiles,accurately predicted wind damage in the plantation.Relationships between different thinning ratios and incidence of wind damage showed that stand stability decreased soon after the thinning.This was due to the immediate effects of thinning on increasing the canopy roughness and wind load,and on decreasing the sheltering effects from surrounding trees.However,thinning strategies could improve the stability by long-term effects on growthand development of trees against extreme wind.Only canopy damage was recorded during the experimental period,no stem damage was found,even though the maximum 10-min wind speed outside the coastal forest attained 30.2m s^-1.The results obtained in this study indicate that thinning is the most effective silvicultural strategy available for managing coastal forest despite the increased probability of wind damage soon after thinning.  相似文献   

Chemical characteristics of squeezable sap of hydrothermally treated silver birch logs (Betula pendula): effect of treatment time and the quality of the soaking water in pilot scale experiment     

Akio Yamamoto  Anti Rohumaa  Eero Kontturi  Mark Hughes  Tapani Vuorinen 《Wood Science and Technology》2015,49(2):289-302

  相似文献   

Continuum contraction of tension wood fiber induced by repetitive hygrothermal treatment     

Sujan  KC  Yamamoto  Hiroyuki  Matsuo  Miyuki  Yoshida  Masato  Naito  Kazuhiro  Shirai  Tatsuya 《Wood Science and Technology》2015,49(6):1157-1169

Wood Science and Technology - Tension wood, when kiln-dried, is likely to deform hugely, which is probably caused by a gelatinous layer of the gelatinous fiber. To elucidate the mechanism behind...  相似文献   

Mitigation of nitrous oxide (N2O) emission from swine wastewater treatment in an aerobic bioreactor packed with carbon fibers          下载免费PDF全文

Takahiro Yamashita  Ryoko Yamamoto‐Ikemoto  Hiroshi Yokoyama  Hirofumi Kawahara  Akifumi Ogino  Takashi Osada 《Animal Science Journal》2015,86(3):358-368

Mitigation of nitrous oxide (N₂O) emission from swine wastewater treatment was demonstrated in an aerobic bioreactor packed with carbon fibers (CF reactor). The CF reactor had a demonstrated advantage in mitigating N₂O emission and avoiding NOx (NO₃ + NO₂) accumulation. The N₂O emission factor was 0.0003 g N₂O‐N/gTN‐load in the CF bioreactor compared to 0.03 gN₂O‐N/gTN‐load in an activated sludge reactor (AS reactor). N₂O and CH₄ emissions from the CF reactor were 42 g‐CO₂ eq/m³/day, while those from the AS reactor were 725 g‐CO₂ eq/m³/day. The dissolved inorganic nitrogen (DIN) in the CF reactor removed an average of 156 mg/L of the NH₄‐N, and accumulated an average of 14 mg/L of the NO₃‐N. In contrast, the DIN in the AS reactor removed an average 144 mg/L of the NH₄‐N and accumulated an average 183 mg/L of the NO₃‐N. NO₂‐N was almost undetectable in both reactors.  相似文献   

Changes in the cellulose crystallinity of moso bamboo cell walls during the growth process by X-ray diffraction techniques     

Keisuke Toba  Takahisa Nakai  Tatsuya Shirai  Hiroyuki Yamamoto 《Journal of Wood Science》2015,61(5):517-524

  相似文献   

Enantioseparation of isoxanthohumol in beer by hydroxypropyl-gamma-cyclodextrin-modified micellar electrokinetic chromatography     

Kodama S  Yamamoto A  Sato A  Suzuki K  Yamashita T  Kemmei T  Taga A  Hayakawa K 《Journal of agricultural and food chemistry》2007,55(16):6547-6552

Chiral resolution of isoxanthohumol (IX) in beer samples was performed by hydroxypropyl-gamma-cyclodextrin-modified micellar electrokinetic chromatography. The optimum running conditions were found to be 20 mM phosphate buffer (pH 7.0) containing 45 mM hydroxypropyl-gamma-cyclodextrin and 100 mM sodium dodecyl sulfate with an effective voltage of +20 kV at 20 degrees C using direct detection at 210, 295, and 370 nm. IX was detected in 12 beer samples and the total levels of (+)- and (-)-IX ranged from 0.15 to 1.4 mg/L. But the amount of xanthohumol (XN) was below the detection limit (0.017 mg/L). Each level of (-)-IX was almost the same as that of (+)-IX, suggesting that IX was a racemic mixture in these beer samples. The racemization of IX in beer could be attributed to the production of a racemic mixture from XN during boiling and to the fact that IX enantiomers were easily interconverted.  相似文献   

Effects of entrance design on catch efficiency of arabesque greenling traps: a field experiment in Matsumae, Hokkaido     

Yong Li  Katsutaro Yamamoto  Tomonori Hiraishi  Katsuaki Nashimoto  Hiroyuki Yoshino 《Fisheries Science》2006,72(6):1147-1152

ABSTRACT:   A field experiment was conducted in the Matsumae area of Hokkaido, Japan, during June and July 2002, to investigate the effects of different entrance designs on the catch efficiency of fish traps by fishing with commercial traps (entrance inclination angle [α] = 37°; funnel length of entrance [ L _f ] = 22 cm) and experimental traps. The experimental traps were of the same size and similar design as commercial traps, with different entrance inclination angles (trap E1: α = 46°; E2: α = 27°; E3: α = 0°; all L _f  = 22 cm) or funnel lengths (E4: α = 37°, L _f  = 8 cm). In total, 2200 fish during 200 trap hauls were captured. The catch was significantly higher using both traps E2 and the commercial trap than with trap E3 ( P  < 0.05), and the catch of trap E2 was higher than that of the commercial trap. There were no significant differences in mean fish body length or the frequency distributions of body length among trap types (E1, E2, E3 and commercial). The funnel length of the entrance also affected the catch of traps. Trap E4 had significantly higher catches than the commercial trap ( P  = 0.04) when traps were deployed for a 1-day soak time. Fish body length frequency distributions did not differ between trap E4 and the commercial trap. The results showed that catch can be greatly affected by trap entrance designs.  相似文献