Structure liming enhances aggregate stability and gives varying crop responses on clayey soils     

Jens Blomquist  Magnus Simonsson  Ararso Etana  Kerstin Berglund 《Acta Agriculturae Scandinavica, Section B - Plant Soil Science》2018,68(4):311-322

It has been suggested that liming can improve soil structure and thereby decrease losses of particles and associated nutrients. In this study, two types of structure lime, slaked lime (Ca(OH)₂) and a mixed product of calcium carbonate (CaCO₃) and slaked lime (Ca(OH)₂), were applied at three different rates in field trials on clayey soils (23%–40% clay). A combination of primary tillage and structure liming was also studied, in a split-plot trial on a clayey soil (25% clay). Aggregate (2–5?mm) stability, measured as reduction in turbidity (which is strongly correlated with losses of particulate phosphorus), was significantly increased with the highest application rates of both structure lime products. Aggregate size distribution was also improved with structure lime, creating a finer tilth in the seedbed. Yield response to structure lime was not consistent, with both negative and positive responses over the four-year study period. Positive yield responses can possibly be attributed to the finer tilth preventing evaporation in two dry growing seasons. Negative yield responses were probably an effect of impaired phosphorus availability associated with limited precipitation in May-July in 2011 and 2013. Two years after liming, soil pH levels were significantly elevated in plots with the highest application rate of structure lime, whereas no significant increases were found three years after liming. However, a lingering effect of liming was still detectable, as manganese concentration in barley grain was significantly lower in plots with the highest application rates of both structure lime products in the fourth study year. These results indicate that structure liming can be used as a measure to mitigate phosphorus losses from clayey soils, thereby preventing eutrophication of nearby waters. However, the yield response was varying and unpredictable and thus further investigations are needed to determine the circumstances in which field liming can act efficiently not only to prevent phosphorus losses, but also to ensure consistent yield increases.  相似文献   

Fitness costs of infection with Serratia symbiotica are associated with greater susceptibility to insecticides in the pea aphid Acyrthosiphon pisum          下载免费PDF全文

Marisa Skaljac  Phillipp Kirfel  Jens Grotmann  Andreas Vilcinskas 《Pest management science》2018,74(8):1829-1836

  相似文献   

Suitability of common models to estimate hydrology and diffuse water pollution in North-eastern German lowland catchments with intensive agricultural land use     

Muhammad WASEEM  Frauke KACHHOLZ  Jens TR&#  NCKNER 《农业科学与工程前沿(英文版)》2018,5(4):420

Various process-based models are extensively being used to analyze and forecast catchment hydrology and water quality. However, it is always important to select the appropriate hydrological and water quality modeling tools to predict and analyze the watershed and also consider their strengths and weaknesses. Different factors such as data availability, hydrological, hydraulic, and water quality processes and their desired level of complexity are crucial for selecting a plausible modeling tool. This review is focused on suitable model selection with a focus on desired hydrological, hydraulic and water quality processes (nitrogen fate and transport in surface, subsurface and groundwater bodies) by keeping in view the typical lowland catchments with intensive agricultural land use, higher groundwater tables, and decreased retention times due to the provision of artificial drainage. In this study, four different physically based, partially and fully distributed integrated water modeling tools, SWAT (soil and water assessment tool), SWIM (soil and water integrated model), HSPF (hydrological simulation program– FORTRAN) and a combination of tools from DHI (MIKE SHE coupled with MIKE 11 and ECO Lab), have been reviewed particularly for the Tollense River catchment located in North-eastern Germany. DHI combined tools and SWAT were more suitable for simulating the desired hydrological processes, but in the case of river hydraulics and water quality, the DHI family of tools has an edge due to their integrated coupling between MIKE SHE, MIKE 11 and ECO Lab. In case of SWAT, it needs to be coupled with another tool to model the hydraulics in the Tollense River as SWAT does not include backwater effects and provision of control structures. However, both SWAT and DHI tools are more data demanding in comparison to SWIM and HSPF. For studying nitrogen fate and transport in unsaturated, saturated, and river zone, HSPF was a better model to simulate the desired nitrogen transformation and transport processes. However, for nitrogen dynamics and transformations in shallow streams, ECO Lab had an edge due its flexibility for inclusion of user-desired water quality parameters and processes. In the case of SWIM, most of the input data and governing equations are similar to SWAT but it does not include water bodies (ponds and lakes), wetlands and drainage systems. In this review, only the processes that were needed to simulate the Tollense River catchment were considered, however the resulted model selection criteria can be generalized to other lowland catchments in Australia, North-western Europe and North America with similar complexity.  相似文献   

Activity-guided separation of Chromolaena odorata leaf extract reveals fractions with rice disease-reducing properties     

Julián Rodríguez-Algaba  Jens Christian Sørensen  Hilmer Sørensen  Nguyễn Đắc Khoa  David B. Collinge  Hans Jørgen Lyngs Jørgensen 《European journal of plant pathology / European Foundation for Plant Pathology》2015,143(2):331-341

  相似文献   

Common vole (Microtus arvalis) ecology and management: implications for risk assessment of plant protection products     

Jens Jacob  Phil Manson  Ralf Barfknecht  Timothy Fredricks 《Pest management science》2014,70(6):869-878

Common voles (Microtus arvalis) are common small mammals in some European landscapes. They can be a major rodent pest in European agriculture and they are also a representative generic focal small herbivorous mammal species used in risk assessment for plant protection products. In this paper, common vole population dynamics, habitat and food preferences, pest potential and use of the common vole as a model small wild mammal species in the risk assessment process are reviewed. Common voles are a component of agroecosystems in many parts of Europe, inhabiting agricultural areas (secondary habitats) when the carrying capacity of primary grassland habitats is exceeded. Colonisation of secondary habitats occurs during multiannual outbreaks, when population sizes can exceed 1000 individuals ha^?1. In such cases, in‐crop common vole population control management has been practised to avoid significant crop damage. The species' status as a crop pest, high fecundity, resilience to disturbance and intermittent colonisation of crop habitats are important characteristics that should be reflected in risk assessment. Based on the information provided in the scientific literature, it seems justified to modify elements of the current risk assessment scheme for plant protection products, including the use of realistic food intake rates, reduced assessment factors or the use of alternativee focal rodent species in particular European regions. Some of these adjustments are already being applied in some EU member states. Therefore, it seems reasonable consistently to apply such pragmatic and realistic approaches in risk assessments for plant protection products across the EU. © 2013 Society of Chemical Industry  相似文献   

Plant species richness and diversity in urban and peri-urban gardens of Niamey,Niger   总被引：1，自引：0，他引：1  

Hannah Bernholt  Katja Kehlenbeck  Jens Gebauer  Andreas Buerkert 《Agroforestry Systems》2009,77(3):159-179

Urban and peri-urban agriculture (UPA) significantly contributes to food and nutritional security of urban dwellers in many African countries. Economic and demographic pressures often lead to transformation of subsistence-oriented traditional homegardens into commercial production units. Such transformation is claimed to result in decreasing plant diversity, particularly of local species. A study was therefore undertaken in 51 gardens of Niamey, Niger, to assess the factors determining plant diversity and the suitability of UPA for in situ conservation of plant genetic resources. In each garden, the number and abundance of all human-used plant species were determined, and species density, Shannon index and Shannon evenness were calculated. In the 51 surveyed gardens, a total of 116 plant species were cultivated, most of them for the production of fruits or vegetables. Annual vegetables dominated, particularly exotic species grown for sale. In the cold season, an average of 14 species were cultivated per garden, the Shannon index was 0.96 and evenness was 0.39. Commercial gardens had a species richness similar to that of subsistence gardens, but a lower evenness (P < 0.005), caused by the dominance of a few vegetable species. Gardens of immigrants had a lower Shannon index than those of members of the local Djerma ethnic group. Stepwise multiple regression analysis showed significant influence of various variables on plant species richness and diversity parameters: garden size (richness and Shannon index), ethnicity of the gardener (richness and evenness), gender of the gardener and cash-oriented production (evenness), household size (richness) and garden possession status (Shannon index). Cluster analysis revealed the existence of five garden types. The highest species richness and diversity, particularly of perennial and local species, was found in large, peri-urban, commercial gardens managed by relatively wealthy, elderly gardeners with large families and a regular non-agricultural income.  相似文献   

Losses of essential mineral nutrients by polishing of rice differ among genotypes due to contrasting grain hardness and mineral distribution     

Thomas H. Hansen  Enzo Lombi  Melissa Fitzgerald  Kristian H. Laursen  Jens Frydenvang  Søren Husted  Chanthakhone Boualaphanh  Adoracion Resurreccion  Daryl L. Howard  Martin D. de Jonge  David Paterson  Jan K. Schjoerring 《Journal of Cereal Science》2012

The effect of different polishing techniques on loss of mineral elements from rice grains was quantified using a panel of indica and tropical japonica genotypes, previously classified as differing in ease of polishing. Gradients in mineral elements across the bran-endosperm interface were quantified using micro-scaled precision abrasive polishing in combination with inductively coupled plasma mass spectrometry and synchrotron X-ray fluorescence microscopy. Frictional polishing, similar to that of commercial mills, i.e. 8–10% loss of grain weight, reduced the concentration of Fe, Mg, P, K and Mn by 60–80% in all genotypes. Following gentler polishing (3–5% weight loss), genotypes classified as difficult to polish showed smaller decreases in Fe, Mg, P, K and Mn compared to genotypes classified as easy to polish. The concentration of other elements, e.g. Zn, S, Ca, Cu, Mo and Cd, showed comparable reductions (<30%) irrespective of polishing technique or ease of polishing. The different patterns of polishing losses of minerals reflected their distribution within the grain. Five-fold differences in the reduction of Zn concentration during polishing were observed for different genotypes which started with similar Zn concentrations in the unpolished grain, thus showing clear potential for selecting genotypes with reduced polishing losses of Zn.  相似文献   

Using the Gluten Peak Tester as a tool to measure physical properties of gluten     

John P. Melnyk  Jens Dreisoerner  Massimo F. Marcone  Koushik Seetharaman 《Journal of Cereal Science》2012

The functional properties of wheat are largely dictated by composition and interactions of the gluten proteins. All flours contain gliadin and glutenin, but produce baked products of varying quality, which provides evidence that gluten proteins from different wheats possess different properties. A common method to study differences in gluten properties, which is utilized in this study, is fractionation/reconstitution experiments to understand how various gliadin to glutenin ratios and how fractions from different wheat sources affect gluten aggregation properties. Gliadin and glutenin from a vital wheat gluten were fractionated with 70% ethanol and reconstituted at various gliadin to glutenin ratios. Gliadin and glutenin from a Canadian eastern soft, eastern hard and western hard wheat (14% moisture) were fractionated and substituted between flours at the native gliadin to glutenin ratio. Gluten combinations were evaluated with a Gluten Peak Tester at constant temperature and mixing. Varying gliadin to glutenin ratio showed that 50:50 is optimal for fast gluten aggregation while amount of glutenin dictates strength. Substitution experiments showed that replacing good quality gluten fractions with those from a lower quality wheat decreases gluten quality, and vice versa. Data also showed that cultivar specific differences in gliadin and glutenin are more important in dictating gluten strength (torque), while gliadin to glutenin ratio dictates aggregation time (PMT) independent of the source of fractions. The study demonstrated the ability of the improved method to evaluate gluten aggregation by controlling for all variables except the one being tested. The data also revealed information about gluten aggregation properties never before seen.  相似文献   

The Fish Industry—Toward Supply Chain Modeling     

Toke Koldborg Jensen  Jette Nielsen  Erling P. Larsen  Jens Clausen 《Journal Of Aquatic Food Product Technology》2013,22(3-4):214-226

Mathematical models for simulating and optimizing aspects of supply chains such as distribution, planning, and optimal handling of raw materials are widely used. However, modeling based on a holistic chain view including several or all supply chain agents is less studied, and food-related aspects such as quality and shelf-life issues enforce additional requirements onto the chains. In this article, we consider the supply chain structure of the fish industry. We discuss and illustrate the potential of using mathematical models to identify quality and value-adding activities. The article provides a first step toward innovative supply chain modeling aimed to identify benefits for all agents along chains in the fish industry.  相似文献   

NH3 Volatilization,N2O Emission and Microbial Biomass Turnover from 15N-Labeled Manure Under Laboratory Conditions     

Mariko Ingold  Gunadhish Khanal  Jens Dyckmans  Christine Wachendorf  Andreas Buerkert 《Communications in Soil Science and Plant Analysis》2018,49(5):537-551

On irrigated agricultural soils from semi-arid and arid regions, ammonia (NH₃) volatilization and nitrous oxide (N₂O) emission can be a considerable source of N losses. This study was designed to test the capture of ¹⁵N loss as NH₃ and N₂O from previous and recent manure application using a sandy, calcareous soil from Oman amended one or two times with ¹⁵N labeled manure to elucidate microbial turnover processes under laboratory conditions. The system allowed to detect ¹⁵N enrichments in evolved N₂O-N and NH₃-N of up to 17% and 9%, respectively, and total N, K₂SO₄ extractable N and microbial N pools from previous and recent ¹⁵N labeled manure applications of up to 7%, 8%, and 15%. One time manured soil had higher cumulative N₂O-N emissions (141 µg kg^?1) than repeatedly manured soil with 43 µg kg^?1 of which only 22% derived from recent manure application indicating a priming effect.  相似文献