Hepatic microvascular dysplasia (HMD) is a disease involving a microscopic shunting of blood through the liver without the presence of a macroscopic portosystemic shunt (PSS). Data was collected from medical records and telephone conversations with referring veterinarians and owners of 24 dogs diagnosed with HMD. Criteria for diagnosis included histopathological evidence of microvascular dysplasia on hepatic biopsy as well as surgical exploration and a normal mesenteric portogram to rule out a macroscopic PSS. Dogs with HMD frequently have less severe clinical signs and a better long-term prognosis than do those with a PSS that are managed medically. 相似文献
Steam explosion of corn stalk in the presence of 3% sulphuric acid at 200 °C for 5 min gave the highest recovery of lignin. Lignin has Mw = 2640 and Mz = 93,994. In the UV spectrum absorptions at λ = 231 and 280 nm were recorded. 1H NMR spectrum of lignin showed signals attributable to cinnamaldehyde units, guaiacyl units, and syringyl units. Syringyl and guaiacyl units are in 1:1 ratio. 13C NMR spectrum showed signals for guaiacyl, syringyl, and p-hydroxyphenyl units. The spectrum showed a prevalence of guaiacyl units. The 13C NMR spectrum is in agreement with the presence of cinnamic units. The same characterization was performed on lignin from pine. The irradiation of lignin from pine from steam explosion process in the presence of oxygen, in conditions described for the formation of superoxide ion, for different irradiation time was followed isolating the lignin and determining the average molecular weight. The experiments showed that, until 8 h irradiation, Mn decreases, while Mw and Mz increases. After 8 h irradiation an inverse behaviour was observed, with an increase of Mn and a decrease of Mw and Mz. These results are in agreement with an initial polymerization process followed by a photoinduced degradation. Ozonization was carried out in acetonitrile–methanol solution. The reaction showed a zero-order kinetics. After 50 min the average molecular weight of lignin is the half. The reaction mixture was analyzed by using GC–MS. Oxalic acid was determined. 相似文献
When Norway spruce trees were inoculated with Ceratocystis polonica, a dose-dependent response was recorded. Local resinosis near the inoculation sites decreased with increasing inoculum density; parallelled by an increasing degree of sapwood staining, and tree mortality. Suppressed trees, and trees showing growth decline appeared more susceptible than trees suffering less competition. 相似文献
Summary To better understand the curing and bonding behavior of phenol-formaldehyde (PF) resin under dynamic conditions, flakeboards were manufactured either by conventional pressing at 7% or 12% mat moisture content or by steam injection pressing with 10 or 20 seconds steaming duration. Resin-impregnated glass-cloth samples and lap-shear tension specimens were embedded in the core of each flakeboard. After the flakeboards were pressed for various periods of times, the samples and specimens were quickly retrieved. The degree of resin cure was determined on the resin-impregnated glass-cloth samples by dynamic mechanical analysis. The bond strengths were measured from the lap-shear tension specimens on a mechanical testing machine. The results of resin curing and bonding were then correlated to the performance of the resin-bonded boards, which were evaluated by internal bond, modulus of rupture, modulus of elasticity, and thickness swelling. Resin curing and lap-shear bonding did not proceed simultaneously. In conventional pressing, the mat moisture content (MC) at 12% favored resin curing, but slightly retarded lap-shear bonding, as compared to 7%MC. In steam injection pressing, the rates of resin curing and lap-shear bond strength development were much faster for 20 seconds than for 10 seconds of steaming duration. Longer press times were needed to obtain boards with maximum strength in the 12%MC conventional pressing and the 20-s steam duration steam injection pressing than in those conditions where moisture content was lower or steam time was less. The need for longer press times must be attributed to higher internal vapor pressures and/or lower wood and resin component strengths, rather than to incomplete cure or bonding.This material is based on work supported by the Ministry of International Affairs, Quebec Government, the Natural Sciences and Engineering Research Council of Canada, and Laval University (Quebec City). The work was also supported by the U.S. Department of Agriculture under research joint venture agreement FP-92-1835 相似文献
Summary The effects of temperature and relative humidity on phenol-formaldehyde resin bonding were evaluated. Two flakes in a lap-shear configuration were bonded under an environment of controlled temperature (110 °C, 120 °C, 130 °C, 140 °C) and relative humidity (41%, 75%, 90%) for a series of time periods (0.25 to 16 min). The lap-shear specimens were then shear-tested on a mechanical testing machine and the results were used to establish a family of bond strength development curves at each temperature and level of relative humidity. At 110°C, the higher relative humidity appeared to retard resin bonding. The effects of relative humidity diminished as temperature increased to 140 °C. Bond strength development was chemical ratecontrolled. The rate of bond strength development at each relative humidity follows a first order reaction mechanism. The activation energy of resin-wood bonding, determined by bonding kinetics, was higher than that of resin alone, determined by differential scanning calorimetry. This comparison indicates that to form a strong resin-wood bond, a higher energy level might be required.This material is based on work supported by the Ministry of International Affairs, Quebec Government, the Natural Sciences and Engineering Research Council of Canada, and Laval University (Quebec City). The work was also supported by the U.S. Department of Agriculture under research joint venture agreement FP-92-1835 相似文献
I conducted a literature survey to assess the available information on relationships between size--expressed in terms of diameter and dry biomass--and hydraulic efficiency of woody structures at different scales, from stem segments to whole trees. Three data sets were constructed: the first described the relationship between segment diameter and hydraulic conductivity (k(h); kg m s(-1) MPa(-1)) in four species; the second, for the same four species, described the intraspecific trajectories of change in total hydraulic conductance (G; kg s(-1) MPa(-1)) during ontogeny, i.e., from saplings to mature trees, thereby providing a comparison between allometric scaling laws at the scales of segments and whole trees; the third comprised pooled means for nine species that described the interspecific trajectory of change in G with tree size. The scaling coefficients obtained were compared with predictions made with an architectural fractal-like model incorporating tissue-specific hydraulic architecture parameters (West et al. 1999). When data on segment k(h) were examined, the fractal-like model closely predicted the scaling of k(h) with segment diameter in four species. However, the model failed to predict accurately in all species the intraspecific scaling at the branch and whole-tree levels, and consistently overestimated the scaling coefficients. The results suggest that ontogenetic changes in tree size during the life cycle of one tree may result in tradeoffs between optimal hydraulic supply to the existing leaf area and maintenance costs of the supporting xylem tissue. The model of West et al. (1999) may be useful for understanding broad interspecific patterns, but not for understanding more subtle ontogenetic changes. 相似文献
Norway spruce trees (Picea abies (L.) Karst.) pretreated by wounding and fungal infection showed highly enhanced resistance to a subsequent challenge inoculation with the pathogenic bluestain fungus Ceratocystis polonica (Siem.) C. Moreau. This is the first time the effectiveness of the constitutive and inducible defenses has been shown to depend on prior wounding and infection in conifers, although such acquired resistance has previously been found in several angiosperms. Trees that were pretreated with a combination of 12 bark wounds (1.6 x 10 cm), four fungal inoculations and four sterile inoculations 1-15 days before mass inoculation with C. polonica at 400 inoculations per square meter over a 0.8 m stem section had significantly shorter necroses in the phloem, less bluestained sapwood, and less dead cambium than untreated control trees. Pretreatment with four fungal or sterile inoculations alone did not lead to enhanced resistance. Pretreatment by bark wounding alone seemed to provide an intermediate degree of resistance compared to bark wounding, fungal inoculations and sterile inoculations combined. All trees had a marked increase in the number of resin ducts in the year of inoculation compared with previous years, suggesting that formation of traumatic resin ducts play an important role in the development and maintainance of enhanced resistance. 相似文献
Field-grown olive trees (Olea europaea L. cv. Leccino) were used over two growing seasons to determine the effect of deficit irrigation regimes on virgin olive oil (VOO) quality. Drip irrigation was managed to maintain a predawn leaf water potential (PLWP): (a) higher than -1.1 MPa (full irrigation: FI); (b) between -1.0 and -3.3 MPa (deficit irrigation: DI); (c) higher than -4.2 MPa (severe deficit irrigation: SI). The fruit yield and oil yield of DI trees were over 90% of those of FI treatments in both years, respectively, whereas yields of SI trees ranged from 61 to 76%. The irrigation regime had minor effects on the free acidity, peroxide value, and fatty acid composition of VOO. The concentrations of phenols and o-diphenols in VOO were negatively correlated with PLWP. The concentrations of the dialdehydic form of decarboxymethyl elenolic acid linked to (3,4-dihydroxyphenyl)ethanol (3,4-DHPEA-EDA), the isomer of the oleuropein aglycon (3,4-DHPEA-EA), and the dialdehydic form of decarboxymethyl elenolic acid linked to (p-hydroxyphenyl)ethanol (p-HPEA-EDA) were lower in FI than in SI treatments. The concentrations of lignans (+)-1-acetoxipinoresinol and (+)-1-pinoresinol were unaffected by the irrigation regime. The tree water status had a marked effect on the concentration of volatile compounds, such as the C(6)-saturated and unsaturated aldehydes, alcohols, and esters. 相似文献
Methods of analysis of vitamin B2 in foods generally consist of the extraction of the sample, followed by enzymatic hydrolysis and quantitative measurement of the analyte, typically through RP-HPLC. The scope of our work here is to present a soft method to measure the free riboflavin content of a nontransparent and nonhomogeneous matrix such as milk, avoiding any extraction and separation of phases that are required in any published method for determination of the free RBF content in foods. We combine the front-face (FF) measurement of the light emission of milk with the ability of the apo-form of the riboflavin-binding protein (RBP) from chicken egg white to quench the riboflavin fluorescence. Thus, we titrate the RBF present in milk by gradually adding a solution of RBP to the milk sample and measuring, upon each addition, the FF residual emission due to uncomplexed RBF. The RBP binding capability has been measured in the same matrix of the analyte. Our results indicate a concentration of free RBF practically co-incident with the certified value for total B2 vitamin content in reference milk CRM 421. Keywords: Front-face fluorescence; riboflavin; apo-riboflavin-binding protein; milk fluorescence. 相似文献
The authors studied a population of 582 gilthead sea breams (Sparus aurata), aged 25–600 days, in order to describe the abnormalities of the opercular complex.
Particular attention was paid to: (1) the different degrees of abnormality of the opercular complex as a whole and of the individual dermal bones (preopercle, interopercle, subopercle and opercle) that compose it; (2) the ways in which the operculum folds into the gill cavity and the relevant histological characteristics. This study discusses the origin and nature of the abnormalities.
Though these abnormalities have a major impact on market value and product image, and are often linked to other disorders in fish, they are still difficult to eliminate. Gaining a basic understanding of these abnormalities will be a first step towards reducing their occurrence. 相似文献