应用积分GM(1,1)模型进行杉木炭疽病预测预报的研究   总被引：1，自引：0，他引：1  

朱建华  叶剑雄  张再福  陈红梅  傅瑞树 《福建林业科技》2002,29(1):23-25

以积分生成代替传统的累加生成方法 ,并用双向差分建立积分GM (1,1)灰色预测模型进行杉木炭疽病预测预报的研究 ,结果表明积分GM (1,1)模型能较好地预测杉木炭疽病在三明市的发生  相似文献   

羊草＋杂类草群落生物量动态模式的研究   总被引：4，自引：0，他引：4  

多立安  田德昌  李敬兰  赵彬  佟振宇 《黑龙江畜牧兽医》1994,(8):4-6

对黑龙江肇州县羊草＋杂类草群落地上生物量的季节动态、地下生物量的分布以及地上生物量与降雨量、温度之间的关系进行了分析．结果表明，在生长季内，群落地上生物量动态模式呈单峰型，符合四次多项式模型增长，最大地上生物量出现在８月５日，其值为１９７．３ｍ２而后下降；群落地下生物量分布由上至下呈负幂函数变化，其模型为：Ｂｕ＝Ｙ·（Ｄ＋１０）－ｘ．其中在０－３０ｃｍ土层中，群落地下生物量占总地下生物量的７７％～８２％．  相似文献   

WEPP模型中的CLIGEN与BPCDG应用对比研究     

缪驰远  何丙辉  陈晓燕  吴咏 《勤云标准版测试》2004,(6)

通过对遂宁组紫色土产流、产沙侵蚀的观测,运用迄今为止最为复杂的土壤侵蚀预测模型WEPP模型进行单次降雨侵蚀预测,与实测值比较,并对比通过气候生成器CLIGEN和断点生成器BPCDG的产生的气候参数对预测值的影响。通过分析比较结果,认为WEPP模型对遂宁组紫色土侵蚀过程预测合理,而且利用断点生成器BPCDG的预测结果要优于气候生成器CLIGEN的预测结果。  相似文献   

Re-defining tillage erosion: quantifying intensity–direction relationships for complex terrain     

T.A. Quine  Y. Zhang 《Soil Use and Management》2004,20(2):124-132

Abstract. Current tillage erosion models account for the influence of tillage direction in the magnitude of the soil (tillage) transport coefficient. It is argued here that this is counter-intuitive and causes significant problems in modelling tillage erosion in areas of complex terrain. This article examines whether a re-modelling of tillage erosion is possible that separates tillage direction (an interaction with the landform) from the soil transport coefficient (a measure of tillage intensity representing the combination of implement erosivity and soil erodibility). Experimental data for mouldboard ploughing upslope, downslope and cross-slope at Coombe Barton Farm, Devon are examined. Integration of data for all directions into a single relationship, which relates translocation in the direction of tillage to slope in the direction of tillage and translocation perpendicular to tillage to slope perpendicular to tillage, is not possible using previously published methods of analysis. However, when total translocation distance is regressed against the tangent of the slope at 45° to the tillage direction (bisecting the tillage direction and the direction of overturning) it is found that a single relationship can be used to describe tillage in all three directions. Therefore, this relationship is used to determine a single value of the soil transport coefficient ( k _fTa) for constant soil and implement conditions but different tillage directions. This redefinition of tillage is important both for true estimation of tillage erosion severity, the adirectional coefficient being 40% larger than the directional coefficient, and for modelling of tillage erosion in complex terrain. These improvements are vital when tillage erosion simulation is used to direct soil conservation strategies.  相似文献   

黄淮夏大豆主要农艺性状的遗传分析     

贺春林  段贵娥  柴建新 《中国油料作物学报》1993,(4)

利用黄淮地区的12个高产夏大豆品种(系),通过NCⅡ交配设计,对12个主要农艺性状的遗传进行了分析。结果表明,所有性状的加性方差大于显性方差。主茎节数、株高、每簇荚数和主茎荚数的加性成分占绝对优势,遗传力较高。分枝荚数、单株粒数和单株粒重的显性成分比例大,遗传力较低,其中单株粒重趋于完全显性。主茎节数的显性成分很少,其它性状均为部分显性。建立了单株产量与产量因子之间的逐步回归方程。  相似文献   

互联网环境下的暖通CAD组件模块的开发方法研究     

张泉  张国强  陈在康 《湖南农业大学学报(自然科学版)》2003,30(5)

针对单机环境下暖通CAD软件重复开发量大、开发周期长等现状，提出了基于互联网环境的三层体系结构及其开发的通用环境，即整个暖通CAD系统被分为不同逻辑块，开发和管理的工作向服务器方转移，从而使分布处理数据成为可能，基于组件的软件开发是互联网环境中应用软件的主要开发方式，以构架为组装蓝图，以可重用组件为组装预制块，支持组装式软件重用，从而克服人力和物力的浪费，进而为了重用暖通CAD已开发出的功能模块，给出组件逆向工程的开发方法、组装流程和组件管理过程。  相似文献   

哈达门国家森林公园游客量动态预测   总被引：3，自引：0，他引：3  

韩鹏  王胜兴 《内蒙古林学院学报》1996,18(2):28-32

根据哈达门国家森林公园的票房数据，应用灰色系统理论建立旅游量灰色动态模型。基此，对哈园游客量进行了中短期预测，其预测检验精度为９３．７２。旨在对该园建设、管理等项决策提供科学依据。  相似文献   

楸树自然变异与良种选择     

郭从俭  张新胜  赵北林  王华荣  楚福民  杨留成 《河南农业大学学报》1994,(4)

对楸树中７种与生长相关的变异因子进行了数量化分析，得出树高、胸径、单株立木材积的主要因子与生长的相关关系，并建立了线性回归方程。提出了良种这样及早期测定的形质性状标准。  相似文献   

哈尔滨市工农兵钢箱索梁桥模型试验研究     

高伟  贾艳敏 《森林工程》1996,12(2):50-51

对哈尔滨市工农兵钢箱索梁桥的模型进行了试验和分析。结果表明,该桥设计采用的理论与试验结果基本相符,为桥梁的修复设计提供了可靠依据。  相似文献   

Performance Evaluation of the ADS 1000 Ventilator Using a Lung Model     

L.S. Faudskar DVM  M. R. Raffe DVM  MS  D. A. Randall BS  D. R. Bing BS  RRT 《Journal of Veterinary Emergency and Critical Care》1997,7(1):49-58

A laboratory evaluation was performed to evaluate the performance characteristics of a new veterinary ventilator. The ventilator studied was configured according to manufacturer's directions and attached to a test lung via a pneumotachograph and differential pressure transducer interfaced to a pulmonary mechanics analyzer system. Constant resistance (R=10 cm H₂O/L/sec) and compliance (C=3 ml/cm H₂O) factors were maintained for all trials. The ventilator operated at the manufacturer's preprogrammed parameters. In the first trial, body weight was the only variable. In the second trial, an endotracheal tube was placed in series between the ventilator's breathing circuit and the pneumotachograph. Body weights from 1–20 kgs were evaluated. Mean values for respiratory rate (RR), minute ventilation (VE), inspiratory time (Ti), peak inspiratory pressure (PIP), and peak inspiratory flow (Fpki) displayed on the ventilator control panel; tidal volume (VT), calculated from the displayed minute volume, and identical parameters measured by the pulmonary mechanics system at each body weight, were compared using a two factor analysis of variance. Significant differences (P< 0.05) were found between mean displayed and measured values for RR, PIP, and Fpki.  相似文献