Application OF SFRHSC IN Blast-Resistant Engineering     

JIAO Chu-jie  SUN Wei  GAO Pei-zheng  ZHOU Yun 《保鲜与加工》2007,(5):168-172

  相似文献   

Nanometer Scale Surface Roughness Measurement Based on AFM     

HAN Xian-wu  CHEN Xiao-an  YANG Xue-heng  BAI Hai-hui 《保鲜与加工》2007,(2):5-8

The datum line and mainly three profile height parameters of surface roughness are briefly introduced and the operation principle and system structure of AFM. IPC - 208B with high-resolution, which was successfully developed by Chongqing University, are described in detail, and the emphasis is laid on its application on the nanometer scale surface roughness. Taking stainless steel for example, its micro-structure was observed, and the surface data were analyzed and transacted by special evaluator and the values of three profile height parameters were obtained. Finally the experimental results are briefly analyzed.  相似文献   

强度参数统计特性对边坡稳定可靠性的影响     

桂勇  罗嗣海  邓通发 《保鲜与加工》2015,(4):67-76

由于对边坡强度参数统计特性考虑不全面,使得边坡可靠性指标计算值偏小,对应的失效概率偏大,常常超过10%,设计中难以采纳,造成地基可靠度规范的制定和执行进展缓慢。以某高速公路全风化花岗岩土质高边坡为工程背景,在分析土质参数统计特性的基础上,采用极限平衡理论和蒙特卡罗模拟法,系统地分析了土质强度参数的均值不定性、变异性、相关性、区间特性和空间变化性等对边坡稳定可靠性的影响。结果表明：土性参数的各种统计特性对边坡稳定可靠性均具有不同程度的影响。可靠性指标计算值随抽样距离的减小而增加,随c或φ均值的增大而增加,随c和φ的变异系数的增大而减小,随c和φ相关系数绝对值的增大而增加,考虑区间性后可靠性指标计算值也明显变大。即变异性对边坡稳定不利,而相关性、区间性和空间变化性对边坡稳定有利。因此,准确而全面地考虑土质参数的统计特性,尤其是在参数变异性和相关性的基础上加以考虑土性参数空间变化性和区间性会更加符合工程实际,且计算结果趋于安全,有利于地基可靠度规范的推广运用和边坡工程的安全评价。  相似文献   

用ImageWare实现缺损点云的曲面重构   总被引：1，自引：0，他引：1  

张景涛  卢章平 《农机化研究》2005,(5):90-92

针对有缺损的点云数据,提出了在逆行工程软件ImageWare平台下进行曲面重构的途径;介绍了运用逆向工程技术进行CAD模型设计的操作流程;用平行面截取点云数据,拟合出曲线线条;通过对曲线条的桥接,利用完整的曲线条重构出曲面。  相似文献   

闭式混凝土泵液压系统研究     

陈英  荆宝德  魏宏宇 《农业机械学报》2006,37(10):132-135

全面介绍了混凝土泵闭式液压系统及其快速换向、快速推进和柔和推送功能的实现。分析了闭式系统的压力切断和速度敏感控制。通过对闭式系统的分析,用功率键合图方法对泵送系统进行建模,并用Matlab/Simulink进行动态仿真,研究了液压系统的动态特性。  相似文献   

喷雾机器人远程控制系统的设计与试验研究     

姚飚  邱白晶 《农机化研究》2007,(11):135-137,141

结合喷雾机器人作业环境的要求,开发出基于客户端/服务器模式的远程控制平台.该平台实现了通过无线网络实时传输各类数据和控制命令,客户端再现了机器人的工作环境和状态.在此基础上进行了系统性能测试和轨迹测试.试验结果表明:为了保证良好的操控性,机器人所处区域信号强度必须大于30%,操作者根据反馈信息判断机器人是否偏离预定路径,并在偏离时给予有效的纠正,为解决喷雾机器人重喷、漏喷的问题提供了一种方法.  相似文献   

泵站中钢筋混凝土梁加固的变形计算     

胡吉  石启印 《排灌机械》2005,23(4):49-52

基于试验研究资料的分析,对于大型泵站中具有合适锚固的CFRP片材加固受弯构件变形计算方法进行研究,认为加固梁的弯矩-曲率曲线符合三线型规律（混凝土开裂前,混凝土开裂后,受拉钢筋屈服后）.通过解析分析,得到试验梁在通常两点加载条件下的任一加载阶段的弯矩及变形计算公式,与相应条件试验梁的试验测试结果吻合,可为泵站工程设计规程的制定提供参考。  相似文献   

保护性耕作条件下松耕作业机具的探讨   总被引：1，自引：3，他引：1  

孔德军  王世学  高焕文 《农机化研究》2004,(1):184-186

松耕作业能打破犁底层、恢复土壤结构，形成适宜农作物生长的土体构造，是提高地表积温和作物产量的有效措施之一。为此，探讨了在秸秆覆盖条件下各种松耕作业机具的工艺特点及机具在保护性耕作播前作业中的适应性。  相似文献   

工程塑料泵叶轮强度计算     

马新华  桑建国  李娟  刘厚林 《排灌机械》2007,25(2):23-25

针对目前广泛使用的工程塑料泵叶轮，对叶片和盖板进行受力分析，得出不同比转数叶轮叶片所对应的系数k1。根据简化模型并应用轮盘理论，详细推导了塑料泵叶轮强度计算公式。结合应用实例，对几种常用工程塑料泵叶片和盖板的强度进行了校核。计算和分析表明：工程塑料中，UHMWPE和PP的部分牌号可以满足强度要求；而PPO和PVDF由于性能优良，可以满足强度要求，从而为泵用工程塑料的选择和使用提供了理论依据。  相似文献   

Surface drainage requirement of crops: Application of a piecewise linear model for evaluating submergence tolerance     

S. K. Gupta  R. K. Singh  R. S. Pandey 《Irrigation and Drainage Systems》1992,6(3):249-261

Crop tolerance to land submergence is an important criterion for designing a surface drainage system for agricultural lands. This paper collates the available data from various places in India related to the studies on the submergence tolerance of crops. The paper hypothesizes that a piecewise linear model could be used to describe crop response to land submergence. According to this hypothesis, there would be no yield decline for a few initial days of submergence. If submergence continues beyond this period then there would be linear decline in yield. The unknown parameters in the model are: optimum yield, threshold time and the slope which represents the per cent yield reduction per day of additional submergence beyond the threshold.Data in respect of wheat, pigeon peas, cowpeas, pearlmillet, maize and groundnuts indicate that the model describes the data well, although in many cases the threshold is 0.0. The yield reduction varies from 5.3 to 23.2% for each day of submergence beyond the threshold. It appears that to allow for more than 1–2 days of submergence will result in more than 10% reducation in yield of dryfoot crops. For the maize crop, the seedling stage is the most sensitive stage followed by the silking stage. The grain formation stage is the least sensitive, although even at this stage the threshold is 0.0 and yield reduction is 9.3% for each day of submergence beyond the threshold. The data for 9 test crops from Texas and Venezuela were well described by the model. It is concluded that the piecewise linear model is a useful tool for describing submergence tolerance of crops and for working out surface drainage requirements for a given level of yield reduction. Frequency analysis of the daily rainfall data from some selected locations indicates that there is every likelihood of submergence at most of the stations. It is suggested that there is an urgent need for developing wet farming techniques analogous to dry farming techniques.  相似文献