3D-MOTIF Method and Its Application to Microscale Topography     

LI Zhi-qiang  CHEN Xiao-an  YANG Xue-heng  HAN Xian-wu 《保鲜与加工》2006,(11):10-14

The 2D motif method is a surface characterization method promising to separate roughness and waviness from a profile and is adopted by ISO,so is meaningful to extend this method to 3D.Vincent's watershed algorithm is employed for the generation of 3D-motif.A smallest area selecting criteria is proposed for the use of clearing the small motifs which are concerned as noise.As there are no manipulating factors as 2D-method,a multi-scale analysis is employed based on area and depth criteria,the use of depth criteria is to prevent the combination of two adjacent motifs if there is a significant peak on the border of them.Finally the surface of C(100) are analyzed by the presented method,the texture of this surface has been characterized.  相似文献   

Pinning Theory of Fermi Energy and Surface State Measurement of ZnSnO3 Gas Sensitive Material     

LI Ji  LIU Tian-mo  ZHAO Xian-rui  WANG Zhong-chang  LI Jia-ming 《保鲜与加工》2006,(5):55-58

In order to research the state of energy bands and gain and loss of electrons on the surface of ZnSnO_(3),it is put forward that Pinning theory of Fermi energy is applied to development of gas sensitive materials.The relative position between surface state and conduction band on surface of zinc tin complex oxide(ZnSnO_(3)) gas sensitive material has been investigated by utilizing oxidation redox couple,FeCl_(2)/ FeCl_(3),which have high surface state.Fermi energy is pinned at about 0.2 eV below conduction band E_(cs)on the surface of ZnSnO_(3).It has been determined that additives doping ratio,addition concentration and working atmosphere have no effect on this value.Therefore,pinning theory of Fermi energy has been verified by using this method.  相似文献   

Optimization of Worm Gearing''s Geometric Parameters Under the Condition of the Errors and the Load     

XU Wu-jiao  QIN Da-tong  SHI Wan-kai ongqing  Chin 《保鲜与加工》2004,(4):24

  相似文献   

Realizing 3 Layers Transport Model in the Communication Between Embedded System and PC     

CHEN Hua-hong  PANG Tao  ZHOU Sha 《保鲜与加工》2005,(3):65-68

This article puts forward a 3 Layers Model for the communication between embedded system and PC. It is based on the speciality of them and the TCP/IP model. The model defines the communicate process of embedded system to be three layers: Transport Layer, Control Layer and Application Layer. Each layer serves for its higher-up. It can keep the efficiency and credibility of the communicate process and the authors prove and analyse that in the article. the concept of the model is also suitable for Bluetooth, IrDA and other kinds of communication about embedded system.  相似文献   

Stability Contrast of Landslide Disaster After Repeating Control     

YIN Guang-zhi  CHENG Guo-jian  ZHANG Dong-ming  ZHANG Xiao-min 《保鲜与加工》2007,(4):34-38

Xiang-jiapo landslide,which consists of shallow layer,middle layer and deep layer,is a multi-landslide with several layers.Influenced by geological condition and rainfall,it have not obtained good effect even after three-time control.Because the distortion of landslide increase so fast, the government planed to control the landslide for the forth time.Based on monitoring data of the landslide movement,the paper make a constrast analysis of 3D numerical simulation's calculating between the formal control and the forth time control by a non-linear finite elements programm ABAQUS.Both results of numerical simulation and monitoring indicate that the forth time control have achieved good effect.  相似文献   

油初始坐果机制研究     

Guo Zhixiong  Pan Dongming  Chen Guixin  Lv Liuxin 《中国农学通报》2007,(7)

以成年油木奈树为材料,对其初始坐果进行了研究。结果表明,盛花后2周内,油木奈出现大量的落花落果;幼果(子房)低水平的GA1 3与油木奈的落花落果高峰关系密切,而内源细胞分裂素ZRs和[diH]ZRs以及ABA与幼果(子房)的生长呈显著的正相关;初始坐果期,油木奈的雌配子体发育缓慢,且有相当数量的胚囊中途退化、败育,无法正常受精,从而导致其大量的落花落果。文中就油木奈的初始坐果机制进行了讨论。  相似文献   

ZrO_2对Al_2O_3基泡沫陶瓷过滤器的性能影响   总被引：1，自引：0，他引：1  

任凤章  王哲  李锋军  刘平  马战红  贾淑果  田保红 《拖拉机与农用运输车》2007,34(3):28-29,32

以Al2O3为主要成分的料浆中加入ZrO2,采用有机泡沫浸渍法,用1560℃烧结制备Al2O3基泡沫陶瓷过滤器,并测定不同ZrO2含量过滤器样品的抗压强度、热震次数并观察其显微结构,实验结果表明:Al2O3基泡沫陶瓷的抗压强度、抗热震性能随ZrO2加入量的增加先增加,而后略有下降。在ZrO2加入量为20%(重量)时制品的抗压强度及抗热震性能最佳,其最高抗压强度达2.31 MPa,1100℃热震循环次数为16次。  相似文献   

离心泵叶轮三维造型     

黄道见  黄程  黄锦 《农机化研究》2004,(6):130-131

离心泵叶轮是离心泵的最主要的部件,它的设计与造型至关重要。通过利用读入数据和、pro/e,对离心泵叶轮进行三维造型,为下一步的分析计算打下基础。  相似文献   

带分流叶片的离心泵叶轮三维贴体网格生成   总被引：2，自引：2，他引：2  

袁寿其  何有世  黄良勇  丛小青 《农业机械学报》2004,35(6):69-71,101

采用泊松方程进行带分流叶片的离心泵叶轮内三维贴体网格的自动生成 ,并通过源项控制来满足网格的正交性及调整网格疏密。计算时根据边界处网格线正交的控制角和控制距离的几何约束确定边界条件 ,利用分块粘接技术生成了带分流叶片离心泵叶轮内的三维分块结构化贴体网格 ,从而提高了流场流动分析中前处理环节的效率和精度 ,能使在湍流计算中广泛应用的壁面函数法的条件容易满足 ,并能使普遍采用的压力第二边界条件直接用于计算中 ,还能满足差分要求 ,减小离散误差。  相似文献   

低比转数离心泵叶轮出口紊流流动结构分析   总被引：4，自引：1，他引：4  

彭晓强  张永学  曹树良  王国玉 《农业机械学报》2004,35(1):69-72

在叶轮内三维紊流流动数值计算的基础上，从介质能量的观点，分析了不同工况下低比转数离心泵叶轮出口处的紊流流动结构。数值计算采用SIMPLEC算法，在贴体坐标系下求解Navier—Stokes方程，紊流模型采用标准的κ—ε模型。计算结果表明，在叶轮的出口附近靠近吸力面一侧存在一个低能区，而压力面一侧能量相对较高。这与有关文献中所指出的离心风机的“射流—尾流”结构相对应。当偏离设计工况时，该低能区的范围和强度略有增加，相对应的叶轮效率也降低。计算结果与水泵在这些工况下的效率实验结果相一致，说明低能区的存在是影响低比转数离心泵效率的重要因素。  相似文献