TRUST REGION METHOD FOR UNCONSTRAINED OPTIMIZATION     

Tang Jian Duan Yurong 《保鲜与加工》1991,(1):33-41

A new trust region algorithm is proposed for solving unconstrained optimization problems. According to the quadratic approximate model of the original optimization problem,the trust region algorithm uses directions,a convex combination of the quasi-newton direction and the steepest descent direction. This algorithm with new strategy is analyzed and the global and local quadratic convergent theorems are proved. At last,the implementation and computational results of the algorithm are demonstrated.  相似文献   

A Study on the Practical Algorithm for One Dimensional Equal Stock Cutting Problem     

Gong Jian Liu Fei Xu Zhongjun 《保鲜与加工》1997,(1):92-97

Based on alalysing the mathematical models for one dimensional equal stock cutting problem,a knapsack column generation algorithm has been constructed,which is a successive approximate algorithm for the practical engineering.In the end of this paper,some computational examples have been presented,which show that the convergence and optimum results of the algorithm are quite good.  相似文献   

软包装调味笋的研制   总被引：2，自引：0，他引：2  

白卫东  赵文红  刘晓艳  黄靖妤 《农产品加工．学刊》2006,(1):40-42

对软包装调味笋加工的色泽和口感进行研究。研究表明,用质量分数为0.005%的NaH SO3溶液预处理原料,用质量分数为0.1%的CaCl2溶液预煮杀青10m in,并用0.15%的醋酸浸泡30m in,焖煮时间控制在5m in,就能较好地保持新鲜笋的色泽,同时兼顾产品较高脆性和较好的滋味,达到良好口感的需要。  相似文献   

A STUDY ON FRACTURE MECHANICS OF BRITTLE MATERIAL WITH PER-CRACKS     

Wan Ling Li He Xu Jiang Yin Guangzhi 《保鲜与加工》1989,(1):79-85

In this paper the fracture process of specimen,with single crack, double cracks and triple cracks is observed and analysed. The experimental results show that the fracture process of specimen is different because of the differention of the number, the distance and the type of array of cracks. And the fracture propagation of specimen with triple cracks and double cracks is foundmentally the same.  相似文献   

激光高速摄影测试装置设计的关键技术     

袁文华  李德桃  龚金科  唐维新 《拖拉机与农用运输车》2006,33(1):61-63

主要介绍了对内燃机燃烧过程进行可视化测试的激光高速摄影装置设计过程中的几个关键技术,针对光学内燃机的改造设计、光学系统设计、同步控制系统设计以及激光器的选用和光学玻璃的配置、加工、使用等方面对高速摄影记录效果分析的影响,提出了相应的技术措施。  相似文献   

面向大规模定制的产品族模糊层次优化研究     

李喆  杜纲  吴绍艳 《中国农机化》2005,(4):40-43

基于对目前产品平台设计的研究综述，分析并指出了研究中的不足。介绍了产品平台的概念和特征，探讨了基于公共平台的产品族设计方法。提出了基于主从关联结构的层次优化设计理念，以及实现这一理念的方法和模型框架：并对模型的数学形式、模糊层次优化做了阐述。  相似文献   

泵自吸过程气液两相流的可视化试验     

李红  姜波  陆天桥 《农业机械学报》2015,46(8):59-65

自吸泵的自吸过程属于复杂的气液两相流动过程。通过建立泵自吸性能外特性及自吸过程气液两相流动特性协同测试系统,采用NI虚拟仪器Lab VIEW编程平台,实现了对泵自吸过程中的进出口压力、流量、转速的瞬态测试;同时采用高速摄影观测系统对自吸泵叶轮、蜗壳及气液分离室内部的气液两相流动过程进行了可视化观测。结果表明:在流量未上升之前,自吸离心泵的自吸过程一直处于动态的稳定过程。气液分离室进口出现的稳定气液分离面有利于气液分离,有助于气泡的排出。而扩散段出口出现的停滞回旋气泡不利于气泡的及时排出,对自吸性能有不良的影响。在自吸末期,流量、压力均有突变的过程,且气液分离室内小水珠、扩散管处气泡数目急剧增多,随后又急剧下降,体现了明显的瞬态效应。  相似文献   

An evaluation of the Porac River irrigation system     

James A. Weller 《Irrigation and Drainage Systems》1991,5(1):1-17

An irrigation water management research programme was implemented by Hydraulics Research in collaboration with the National Irrigation Administration of the Philippines on the Porac Area of Porac Gumain Rivers Irrigation System. The objectives of the study are to monitor the response of the main canal network to changes in water availability and assess its capability to deliver crop water requirements to sub-areas jointly managed by National Irrigation Administration staff and existing Irrigator Associations. This paper presents an analysis of the response of the main system to the varying irrigation demands, and assesses the conjunctive use of groundwater with surface water and the potential of computer models to assist management with the preparation of the annual irrigation schedules.  相似文献   

垃圾填埋沼气的收集、净化与利用综述   总被引：9，自引：0，他引：9  

石磊  赵由才  唐圣钧 《中国沼气》2004,22(1):14-17

垃圾填埋沼气的回收利用是一项经济可行且对环境有益的技术.本文从填埋沼气的组成及其影响因素出发,探讨了沼气的收集、输送和贮存途径,介绍了当前的净化工艺,最后总结介绍了几种填埋沼气利用技术的特点及其适用性,并提出建立配备填埋沼气回收装置的卫生填埋场应成为我国城市垃圾处理的发展方向.  相似文献   

低压射流不同喷嘴参数及压力下破碎过程实验     

蒋跃  李红  向清江  陈超 《农业机械学报》2015,46(3):78-82

研究了不同低压下喷头喷嘴直径和喷嘴锥角对射流破碎的影响。采用高速摄像仪对低压圆柱射流的射流核心长度和射流破碎长度进行实验,测量了不同喷嘴结构的流量、射程和末端水滴直径。结果表明:同一压力下,当喷嘴锥角不变时,随着喷嘴直径的增大,喷头流量、射程和喷头末端水滴直径都变大,射流核心长度和破碎长度均增大;当喷嘴直径不变时,随着喷嘴锥角的增大,喷头流量逐渐减小,而喷头射程呈先增大后减小趋势,喷头末端水滴直径也变大,射流核心长度逐渐减小,射流破碎长度先减小后增大。综合考虑射程和雾化效果,直径为5 mm、锥角为45°的喷嘴为最优选择。同时通过对不同Re数和We数的实验和分析,给出了适合低压喷嘴的两种射流特征长度的拟合关联式。  相似文献