柔性坐标测量机参数辨识方法   总被引：3，自引：1，他引：3  

汪平平  费业泰  尚平  程文涛 《农业机械学报》2007,38(7):129-132

设计了一种六自由度关节式柔性坐标测量机,并对该测量机测量方程中的参数进行了辨识,提出了一种快速简易的单点锥窝标定方法。该方法基于单点锥窝提供的空间单点基准,利用非线性最小二乘中的高斯-牛顿法,求解测量机测量方程的参数值。实验结果表明,该方法能够有效提高测量机的整体精度,且操作简单、计算效率高。  相似文献   

梳脱式联合收割机脱粒与输送装置模糊控制系统   总被引：1，自引：0，他引：1  

陈进  李智文  李耀明 《农机化研究》2003,(4):60-62

建立了梳脱式联合收割机脱粒与输送装置的动力学模型，应用Fuzzytoo1box设计了模糊控制器。当作物属性变化等因素而引起该装置的工作负荷发生较大变化时，模糊控制器能够对机组前进速度傲出相应的调整，使被控量迅速恢复到设定值附近，且能保持稳定，有利于发挥机器的最大的工作潜能，提高机器的可靠性，降低机器故障率。  相似文献   

适期收割对稻谷损失影响的研究   总被引：5，自引：3，他引：5  

徐润琪  刘建伟  张萃明  後藤清和  三轮精博 《粮食储藏》2003,32(3):47-50

稻米原粮爆腰率是影响加工过程中出米率的重要因素。经调查，农家交售原粮中爆腰率高达25％，其中有干燥、储藏方面的原因，也有收割期不当的原因。本研究从一株稻穗中谷粒含水率与爆腰率的关系分析着手，通过对田间不同品种、不同含水率稻谷爆腰率的测定，并用概率统计方法进行分析的结果证明，完整谷粒的平均含水率在20％以上时收割，可以有效地避免田间爆腰率的发生。  相似文献   

杂交水稻制种提高结实率的研究     

许琨  舒昆 《种子》1997,(1):17-20

杂交水稻制种不同于水稻栽培、其结实由柱头外露结实和非柱头外露结实两部分构成；空壳中90％以上是由于没有授粉受精造成的：90％以上的受精拉都能正常发育结实。柱头外露率和受精率与结实率呈显著正相关。后期施肥、父本大龄秧和机械授粉能有效地提高柱头外露率、花遇优度和结实率及制种产量。  相似文献   

Operational Deflection Shape Analysis of Large Scale Electromechanical System     

Lin Baoyang  Zhang Chenggei 《保鲜与加工》1994,(5):68-73

Operational Deflection Shapes of large scale electromechanical system can be ex-tracted directly from multipoints response of the operating system by using of the modal shape analy-sis method. Thev can be used for engineers evaluating the practical dynamic beavior of the largescale elecltromechanical system,checking the existence of local reso,iance of the Stibsystem. and in-dentifying the wcakened positions of the rigidity of structure, In this paper the method of measuringand extracting the operational deflection shal1e of the electromecha nical system is given and theavailability of operational deflection shape is proved by analyzing the actual vibration of a large ex-haust fan system as an example.  相似文献   

Vehicle Type Recognition by Using Support Vector Machine SVM     

XlAO Han-guang  CAI Cong-zhong  WANG Wan-lu 《保鲜与加工》2006,(1):61-65

  相似文献   

A NEW METHOD BY USING MASS AND ACCELERATION PARAMETERS FOR BALANCING INERTIAL FORCE OF MECHANISM     

Wang Bingle Song Liquan 《保鲜与加工》1988,(2)

This paper presents a new method by using mass and acceleration parameters for balancing inertial force of mechanism. Compared with other balance methods, this one is simple, clear and superior in regularity when the balancing equation of complex mechanism is established, and its solving procedure is also easy. The new methcd is convenient to learn and use as well as convenient to program.  相似文献   

Design for Precision Measurement System Based on Machine Vision     

LIAO Qiang  MI Lin  ZHOU Yi  XU Zhong jun 《保鲜与加工》2002,(12):21-23

It is difficult to measure the geometric quantity of small parts in finishing, assembling and measuring, because it's easy to break the workpieces' surface and alter their position by means of traditional contact measuring methods.There are some non contact measurers, such as,light feeler pin and interference microscope etc., because of it's high price and strict working conditions,so it's difficult to promote them in widely use. Precision measurement system based on machine vision has the advantages of non contact measuring as well as high performance and low price. Some problems, such as light source, algorithm of edge fitting, auto focusing,are discussed.  相似文献   

Computer-aided Classification and Identification of Traditional Chinese Medicine Herbal Formula     

CAI Cong-zhong  YUAN Qian-fei  XlAO Han-guang  LIU Xing-hu  KONG Chun-yang 《保鲜与加工》2006,(10):42-46

  相似文献   

MACHINE PARAMETER IDENTIFICATION AND FAULT DETECTION FOR THE ALTERNATOR SYSTEM     

Tu Zhiying Yu Chuzhong 《保鲜与加工》1988,(1)

In this paper, the machine( physical) parameters of the alternator system are on-line estimated on the basis of the derived system continuous-tims model, using Recursive Least-squares Estimation and Inverse Calculation Method proposed by Authors. Therefore, the estimated machine parameters can effectively track the changes of their true values and accomplish the fault detection for the alternator system. This paper gives a new way for machne parameter estimation and fault detection of the alternator systems.  相似文献