中国传统木结构在继承和创新发展中的问题分析     

许建华  杨会峰  陆伟东 《木材工业》2011,25(5)

回顾总结我国传统木结构建筑的发展历史,并对我国传统木结构建筑及其文化的传承、推广进行深入分析;针对传统木结构发展瓶颈,提出我国传承和发展传统木结构的主要课题,指出现代科技在传统木结构发展中的重要作用,并从科研投入、人才培养、产学研合作及产业化等方面,对我国传统木结构的发展提出建议。  相似文献   

Increasing mixer-added fat reduces the electrical energy required for pelleting and improves exogenous enzyme efficacy for broilers     

《The Journal of Applied Poultry Research》2011,20(1):75-89

  相似文献   

Boron toxicity of strawberry     

《Communications in Soil Science and Plant Analysis》2012,43(11):1085-1091

Abstract

Radlands Crimson strawberries were grown in a glasshouse with 7 rates of applied boron. Wood shavings mulches with different boron concentrations were also applied as separate treatments. Boron toxicity symptoms were produced in leaves by boron rates of 0.32 kg ha^‐1 and greater on a soil containing 1.6 ug B g^‐1 of hot water extractable boron. Concentrations greater than 123 μg B g^‐1 in old leaves were associated with boron toxicity symptoms.

In the B rate experiment, soil boron concentrations greater than 1.9 μg B g^‐1 soil were associated with leaf toxicity symptoms which increased in severity with increasing soil boron concentrations up to 4.1 μg B g^‐1 soil. Wood shavings mulch containing 17 μg B g^‐1 caused boron toxicity symptoms in older leaves whereas mulches containing less than 6 μg B g^‐1 did not produce toxicity symptoms.  相似文献   

木/竹基复合材料在机电产品包装的应用     

梁艳君  于文吉 《木材工业》2015,29(2):30-33

我国机电产品的包装大量使用实木材料,面临着资源紧张和成本高昂等问题。通过分析机电产品包装材料的结构形式和承载要求,讨论重组木/竹复合材料在包装行业应用的可行性,从政策、成本和性能等方面,总结新型重组木/竹复合材料替代实木材料用于机电产品包装的优势及发展前景。  相似文献   

Basic handling characteristics of wood fuels: Angle of repose,friction against surfaces and tendency to bridge for different assortments     

《Scandinavian Journal of Forest Research》2012,27(1-4):583-597

Basic handling characteristics were measured for sawdust, fuel pellets, fuel chips, hog fuel and chunkwood. The aim was to find relations between the basic handling characteristics and easily measurable fuel properties to facilitate the design of feeding systems in heating plants. The angle of repose was 25–55° and increased with the increasing ratio of particle length to thickness and with the increasing content of hooked or long particles. The angle of static friction, 10–40°, was affected more by the kind of surface than the fuel and followed the ascending order: coated plywood, urethane rubber, particle board, stainless steel, concrete and rubber belt conveyor. The tendency to bridge varied considerably and increased with greater content of hooked or long particles, a deeper fuel bed depth over the opening and a higher moisture content. The results indicate that more attention should be paid to the particle shape.  相似文献   

浅析影响难胶材胶合的主要因素     

饶丽敏  李伊乐 《内蒙古林业调查设计》2010,33(3):89-92,113

文章介绍了难胶合材的主要特征。论述了影响难胶合材胶合的几个主要因素,诸如解剖结构特征、抽提物、PH值、密度和表面机械加工特征。  相似文献   

基于最小二乘法的落叶松木粉粒径数学建模与分析     

任洪娥  沈雯雯  白杰云  官俊 《林业科学》2015,(4)

【目的】建立落叶松木粉粒径与长宽比的数学模型，通过分析数学模型和其二阶导数，揭示木粉长宽比随粒径减小的变化趋势及变化的根本原因，获得最大长宽比对应的粒径，为建立长宽比与力学性能之间的定量关系提供参考。【方法】利用光学显微镜拍摄获得木粉的显微图像，测算获得目标木粉成熟管胞的平均长度、平均宽度以及木粉粒径的大小。通过数字图像处理技术提取单木粉颗粒的矩形度、长宽比：将原始木粉显微图像由 RGB颜色空间转到Lab颜色空间，提取其b分量；对b分量图像用3×3模板进行中值滤波；用K-means算法将去噪后图像聚类为2类，得木粉的二值图像；对二值图像用5×5的结构元素进行先开启后闭合的数学形态学运算；用八连通区域法标记图像中的单木粉颗粒；对标记后图像用目标区域像素点个数统计法计算获得单木粉颗粒的几何面积，用主轴法获得单木粉颗粒的最小外接矩形的长、宽、面积；计算获得单木粉颗粒的长宽比、矩形度数据。采用最小二乘法对木粉粒径与长宽比进行数据拟合，通过分析评判多项式、高斯和傅里叶3种拟合函数后选用高斯方程表达得木粉粒径与木粉长宽比的数学模型，再根据其拟合曲线方程计算得其二阶导数，结合模型的二阶导数和测算得的木粉管胞数据对高斯模型进行分析与讨论。【结果】矩形度不随木粉粒径的减小而变化，均值在0.6～0.8之间。长宽比随粒径减小出现先增大后减小的趋势：木粉粒径在1100～576μm 时，长宽比数值从接近于1开始逐渐增大；木粉粒径为576μm时(与本文目标木粉成熟管胞的平均长度563.82μm接近)，长宽比达到最大数值4.6；木粉粒径在576～30μm时，长宽比逐渐减小；而粒径小于50μm 时(与目标木粉成熟管胞的平均宽度46.498μm接近)，长宽比数值再次趋近于1。【结论】长宽比的变化与管胞破裂密切相关：木粉粒径大于管胞长度时，木粉主要通过纵向断裂使粒径减小；粒径与管胞长度接近时，长宽比较大；粒径小于等于管胞宽度范围内，木粉主要是横向断裂，而长宽比基本不再发生变化且趋近于1。长宽比和冲击强度随粒径减小的变化趋势是一致的，长宽比是影响材料力学性能本质因素之一。  相似文献   

GVF Snake模型在木材表面缺陷分割的应用研究     

白雪冰  郭景秋  陈凯  李昊  许景涛 《中南林业科技大学学报(自然科学版)》2015,(2):90-95

针对木材表面存在纹理、凹凸结构、边缘颗粒和弱边缘等特点,对其直接运用Snake模型进行分割难以得到有效边缘提取,因此提出运用改进的GVF Snake模型和维纳滤波相结合对其进行分割。首先对木材图像进行维纳滤波使得纹理变得平缓,同时可以使得缺陷边缘得到有效保留,再对其进行GVF Snake模型分割。该算法对初始轮廓的选择敏感度降低,拓展性增强,可以使得轮廓曲线更加快速地收敛到缺陷边缘,避免陷入局部最优现象,提高对弱边缘和凹凸图像分割效果,分割结果更加清晰、连贯,具有良好的实时性。为木材表面缺陷的分割提供一种更为有效的方法,拓宽了snake模型的应用范围。  相似文献   

Possibilities for energy wood procurement in north-west Russia: Assessment of energy wood resources in the Leningrad region     

《Scandinavian Journal of Forest Research》2012,27(6):559-567

Abstract

Methodology to assess the potential for energy wood procurement in Russia is described in this article and applied to the Leningrad region. Wood from thinnings, logging residues, non-industrial roundwood and residues from sawmilling are considered as sources for energy production. Energy wood available in the region, based on the 2004 actual cut, is approximately 4 million m³. Nearly 86% of this is non-industrial roundwood and felling residues, and 14% is by-products from sawmilling. Almost two-thirds of the non-industrial roundwood and felling residues are in cutting areas and one-third is in central processing yards. Deciduous tree species (birch and aspen) dominate in energy wood, representing about 65% of the total amount of felling residues and non-industrial wood. It is possible to intensify utilization of forest resources and thereby also to increase the use of wood in energy production. The total amount could be 54% higher if the allowable cut was fully utilized and 124% higher if thinnings were also utilized completely. There are, however, significant intraregional differences, as the current rate of utilization of forest resources varies in the region.  相似文献   

不同饲料饲喂断奶仔猪对比试验研究     

郭雪洁  陈辉  王立强 《畜牧兽医杂志》2012,31(2):18-20,23

为了给断奶仔猪选择合适的饲料类型,采用2种类型的饲料对60头35日龄断奶的仔猪进行饲养试验。试验分为2组,即颗粒饲料组和粉状饲料组,每组三个重复,经30 d的饲养试验,结果表明：颗粒饲料组仔猪体质量每日增加数、日头均耗料量明显高于粉状饲料组（P〈0.05）,且颗粒饲料组的经济效益要高于粉状饲料组,而饲料转化效率没有明显差异（P〉0.05）,说明颗粒饲料比粉状饲料更适合饲喂断奶仔猪.  相似文献