CAD Environment for Quoting Utility Boiler Based the Characteristic Construction     

ZHANG Yi  LIU Jian -hu  GUO Gang  XU Zong -jun  LIU Lin -juan 《保鲜与加工》2002,(7):137-139

The authors discuss such questions for utility boiler as the complicated flameworks,combined quoting course, long cycle, hardly controlling the quoting veracity and so on. Based on the construction diagram of quoting design for utility boiler, Which is into the boiler sketch's construction and parameter characteristic. They are furnace construction, big screen superheater, high temperature superheater, low temperature superheater, high temperature reheater, low temperature reheater, economy coal implement, common use sign and standard sketch in boiler sketch, etc. According to demand of the quote design for utility boiler, the CAD environment of quoting system based on characteristic construction and parameter are developed. Total construction of this environment , developing characteristics and function of this system are given.  相似文献   

Simulation of High Pressure Startu Poil Pum Pof Turbine     

ZHOU Li-jun  TANG Sheng-li 《保鲜与加工》2006,(11):66-68

Dynamic mathematical model, which is based on the character of the 200 MW tubine lbricating oil system, is established by means of modularization. On the basis of dynamic mathematical models, simulation model of the startu Pprocess of hign pressure startu Poil pum Pis created with the Visual Fortran language. The validity of this model has been verified by the simulation experiments and analysis. The simulation helps to forecast the dynamic characteristic to high pressure startu Poil pum Pand have some directive significance to design method of lubricating oil system.  相似文献   

SWARM Based Artificial Stock Market and the Characteristic Facts     

YU Tong-kui  CAO Guo-hua 《保鲜与加工》2007,(11):152-156

  相似文献   

Study on Dynamical Characteristic of Epicyclic Gear Drive with Internal Tooth     

Zhu Caichao Qin Datong Li Runfang Chen Zongyuan 《保鲜与加工》1997,(5):26-32

The epicyclic gear drive with internal tooth is analysed,a dynamic analysis model which is based on the compatibility conditions of deformation is set up.On the basis of this model,the analysis of dynamics and kinematics is made,and the influence of design parameters on dynamical characteristic is also studied.  相似文献   

黄淮夏大豆形态性状的遗传研究     

贺春林  薛应离 《华北农学报》1991,6(2):25-29

本文以黄淮地区6个夏大豆品种(系)通过双列杂交保留下来的F_3代材料,研究大豆6个形态性状的遗传特性.结果表明,株高、有效分枝数、主茎节数、主茎荚丛数和茎粗5个性状均符合加性—显性模型.而底荚高则存在非等位基因之间的互作效应.株高、有效分枝数、主茎节数和主茎荚丛数为部分显性,茎粗存在超显性现象.主茎节数和主茎荚丛数可能有相似的遗传特点.豫豆8号大豆带有较多的控制株高的显性基因,油84-30大豆带有较多的控制分枝和茎粗的显性基因,而尖顶大白角大豆控制主茎节数和美丛数的显性基因较多.  相似文献   

大麦多数量性状相关分析     

熊寿福  张健 《种子》1991,(4):28-31

穗长、穗粒重两性对小区产量直接影响较大;每穗实粒数和每穗不实粒两性状数对小区产量直接影响很小,但通过其他性状对小区产量的间接负影响很大;每穗总粒数对小区产量直接负影响很大,株高通过其他性状对小区产量间接正影响很大。  相似文献   

玉米叶混掺对土壤水分入渗的影响     

郑健  王燕  蔡焕杰  万吉祥  李志军 《灌溉排水学报》2015,34(3)

通过不同玉米叶混掺比例及混掺层埋深的垂直入渗试验,并以纯土为对照,研究玉米叶混掺对累积入渗量、入渗率及剖面含水率等的影响。结果表明,处理间土壤水分特征曲线差异明显;相同土壤水吸力下,添加玉米叶的土壤含水率均高于纯土处理,且添加3%玉米叶的土壤保水性明显优于添加1%玉米叶;土壤密度一定时,累积入渗量均表现为纯土1%玉米叶处理3%玉米叶处理;添加3%玉米叶对剖面含水率的影响高于1%玉米叶。  相似文献   

泵及其系统失压特性研究与计算     

阎庆绂  郭亚洁  董若凌 《农业机械学报》2003,34(3):52-54,78

通过试验表明,在突然停泵和突然关闭泵出口阀两种失压工况下，系统中流量和压头出现振荡，水流出现正、反向交替流动，同时伴有空穴的产生、发展和溃灭，使全系统进入瞬变工况。阀突然关闭造成的泵出口管路高压，使泵出口压头呈现先突然升高再快速下降的振荡曲线，它反映出系统失压对泵组运行的影响是明显的。用固定波速无气体释放模型和变波速有气体释放模型对管系中的瞬变工况进行了计算。压头计算结果与试验结果较接近，而计算的空穴变化规律只在初始阶段较为符合。试验结果和计算结果的差异反映了真实泵系统的复杂和数值计算模型的不足。  相似文献   

竖井贯流泵能量特性试验研究   总被引：2，自引：0，他引：2  

郑源  张德虎  廖锐  谢伟东  薛建良  黄春云 《排灌机械》2003,21(3):31-34

结合江苏某竖井贯流式泵站，对两种不同转轮在相同进、出水流道情况下进行了能量特性试验研究．试验研究表明，竖井贯流式水泵在超低扬程(1—2m)的调水工程中具有很好的水力性能，其模型泵装置的最高效率达69％左右，该项试验研究为今后竖井贯流泵的进一步开发研究获得了良好的开端．  相似文献   

拖拉机－挂车机组非线性系统随机响应分析     

周继铭  程悦荪 《农业机械学报》1995,(4)

推导了随机激励下参数频变系统的统计线性化方法。利用该方法对铁牛－６５４拖拉机挂车机组非线性系统进行了平稳激励下随机振动响应的计算，计算结果表明，把拖拉机挂车机组作为非线性系统来处理可显著地提高振动分析的精度。  相似文献