红碎茶CTC齿辊数控加工及误差统计研究   总被引：1，自引：0，他引：1  

尹志强  刘光复  史国川  朱保国  薛云林 《农业机械学报》2001,32(4):57-59,63

介绍了自行研制的红碎茶CTC齿辊微机数控加工车床的总体方案，进给系统结构设计以及微机数控硬件系统主要构成、软件功能和加工子程序。利用数理统计学方法，对齿辊3mm节距误差进行了分析研究，结果表明采用微机数控加工齿辊，节距精度得到明显提高。该机同时也保留了普通车床基本功能。  相似文献   

小缸径直喷柴油机喷雾与燃烧三维数值模拟     

魏强  尹必峰  刘胜吉  徐毅  王伟峰  庄华良  韦锦祥 《拖拉机与农用运输车》2007,34(3):46-48,53

应用CFD软件对一台小缸径增压中冷柴油机进行了喷雾燃烧数值模拟,得到了详细的喷雾发展形态、燃油浓度分布和燃烧过程温度场、有害排放物分布等重要信息,为燃烧室结构优化设计和与油嘴匹配奠定基础。计算结果表明,计算示功图与实测值吻合较好;喷油阶段,油束存在碰壁现象,燃烧室凹坑底部燃油浓度较高;随着活塞下行,锥台与凹坑连接处空气运动较弱,燃油浓度较高,同时NOx与Soot生成与混合气浓度、空气运动、温度有密切联系。  相似文献   

带分流叶片的离心泵叶轮三维贴体网格生成   总被引：2，自引：2，他引：2  

袁寿其  何有世  黄良勇  丛小青 《农业机械学报》2004,35(6):69-71,101

采用泊松方程进行带分流叶片的离心泵叶轮内三维贴体网格的自动生成 ,并通过源项控制来满足网格的正交性及调整网格疏密。计算时根据边界处网格线正交的控制角和控制距离的几何约束确定边界条件 ,利用分块粘接技术生成了带分流叶片离心泵叶轮内的三维分块结构化贴体网格 ,从而提高了流场流动分析中前处理环节的效率和精度 ,能使在湍流计算中广泛应用的壁面函数法的条件容易满足 ,并能使普遍采用的压力第二边界条件直接用于计算中 ,还能满足差分要求 ,减小离散误差。  相似文献   

Demography,population dynamics and sustainability of the Patagonian sheep flocks     

Marcos Texeira  Jose M. Paruelo 《Agricultural Systems》2006

Sheep production is the main agricultural activity in Patagonia. Since the middle of the 20th century, sheep numbers have declined steadly. We used historical records of stock numbers in four ranches to analyze the importance of regional factors so as to explain the decline of the Patagonian sheep flocks. We found that the stocks of all the four ranches declined with a similar trend but fluctuated independently, thus reflecting a complex interaction between regional and local factors. Aboveground net primary production (ANPP) and vegetation physiognomy explained most of the differences in the flocks declining rates. We estimated demographic parameters for two ranches differing in their average annual growth rates. From these demographic parameters, we constructed deterministic and stochastic matrix models to establish the relative contribution of demographic processes to the observed decline. Matrix models projected a faster decline than that observed in the ranch used to calibrate the model. This suggests that the recorded demographic parameters could drive most stocks to extinction in less than 100 years. We concluded that the observed dynamics would be generated by demographic processes, but extinction is delayed or avoided by a continuous intake of animals. Ewe survival was the most important parameter in controlling the growth rate of the flocks. The environmental stochastic model showed that the growth of the stocks was highly sensitive to increases in the frequency of good years (those that produce a positive growth) and in the transition from normal years to bad years. All these evidences point out the existence of biological constraints to sheep production in Patagonia: ANPP and vegetation structure would control flock population dynamics throughout its effects on key demographic parameters, ewe survival and marking rate (a recruitment measure). Our model results suggest that the decline in sheep numbers, and hence the sustainability of the activity, is driven, to a large extent, by the demographic characteristics of the flocks.  相似文献   

Inverse Modeling to Quantify Irrigation System Characteristics and Operational Management     

Amor V.M. Ines  Peter Droogers 《Irrigation and Drainage Systems》2002,16(3):233-252

Remotely sensed (RS) data is a major source to obtain spatialdata required for hydrological models. The challenge for thefuture is to obtain besides the more direct observable data(landcover, leaf area index, digital elevation model andevapotranspiration), non-visible data such as soilcharacteristics, groundwater depth and irrigation practices.In this study we have explore the option of using inversemodeling to obtain these non-RS-visible data. For a commandarea in Haryana, India, we applied for the 2000–2001 rabiseason a RS-GIS-combined inverse modeling approach to derivenon-RS-visible data required in the regional application ofhydrological models. A Genetic Algorithm loaded stochasticphysically based soil-water-atmosphere-plant model (SWAP) wasdeveloped for the inverse problem and used in the study. Theresults showed good agreement with the inventoried data suchas soil hydraulic properties, sowing dates, groundwaterdepths, irrigation practices and water quality. The deriveddata could be used to predict the state of the system at anytime in the cropping season, which can be used to evaluateoperational management strategies.  相似文献   

永寿县沙棘人工林生长规律初探   总被引：1，自引：0，他引：1  

梁立军  马进  张广军 《国际沙棘研究与开发》2004,2(2):16-19

本文对永寿县沙棘良种选育基地试验区人工沙棘林单株树高、 30 cm处直径进行了系统的研究 ,结果表明 :1.沙棘 30 cm处直径和树高的速生期一般都出现在第 2～ 5年 ,连年生长量高峰期出现在 3～ 4年之间 ,平均生长量的最大值出现在第 4～ 5年之间。 2 .分别对沙棘树高、 30 cm处直径与树龄进行回归分析 ,得出了沙棘树高、30 cm处直径的生长模型和树冠的生长模型 :D0 .3 0 =10 ( 0 .8774- 1.92 0 1/A) 、H =- 0 .2 784 + 0 .6 2 89A- 0 .0 30 9A2、Cw=1.6 43× 10 0 .2 2 9- 0 .5 3 89/A。  相似文献   

管网中泵破坏瞬变流的数值模拟     

王双明  杨红  潘光在 《农业机械学报》2003,34(2):34-36

建立了管网中泵破坏瞬变流的数值模拟，该模型考虑了泵破坏无量纲非线性边界条件，运用特征线法对方程进行了求解。经验证，证明模型是可靠的，可用于工程分析计算。  相似文献   

半轴套管热挤压成形工艺数值模拟   总被引：1，自引：1，他引：1  

陈文琳  朱玉生  聂会星  叶永旭  李伟  王世东 《农业机械学报》2007,38(11):153-156

通过对半轴套管的工艺分析,基于体积不变原则,采用逆向法计算零件毛坯,确定了热挤压成形工艺方案;结合刚粘塑性有限元法基本原理,运用有限元软件对半轴套管的反挤压过程进行3-D热力耦合模拟。影响半轴套管热挤压成形的主要工艺参数有挤压温度、挤压速度、模具预热温度等。在其他条件相同情况下,分别设置不同的挤压温度、挤压速度、模具预热温度,通过对不同参数模拟结果的分析比较,得出工艺参数对半轴套管成形的影响状况,揭示热挤压成形过程中的金属流动规律。优化的成形参数,提高了半轴套管的成形性能和经济性能。  相似文献   

燃烧室结构对天然气发动机燃烧过程的影响   总被引：5，自引：0，他引：5  

李娜  张强  王志明 《农业机械学报》2007,38(2):52-55

为了研究燃烧室结构对天然气发动机燃烧过程的影响,模拟了浅盆形和涡流室式燃烧室结构的天然气发动机的进气、压缩及燃烧过程。给出了2种不同结构燃烧室的燃烧持续期、燃烧过程中缸内气流运动、火焰前锋面位置等,并对2种燃烧室进行了试验对比。模拟计算及试验结果表明,通过涡流室喷孔的约束作用,可以改善已燃气体和未燃气体之间的传热传质模式,提高火焰传播速度。  相似文献   

时序进气柴油机缸内分层与燃烧排放特征数值分析   总被引：1，自引：0，他引：1  

沈照杰  崔文政  刘忠长  韩永强  田径  杨建国 《农业机械学报》2015,46(9):350-355

缸内再循环废气(EGR)分布是发动机缸内EGR分层燃烧研究的重点与难点,由时序进气策略通过控制进气组分的充气时段来组织缸内EGR分层分布具有重要意义。以高压共轨重型柴油机为研究对象,采用CFD(Computation fluid dynamics)方法建立全参数数值仿真平台,研究不同时序进气组分经过进气及压缩过程后在缸内的分布特征及其对柴油机缸内燃烧及排放的影响。研究中以CO2代替EGR。研究结果表明,时序进气早期进气组分在气缸底部及燃烧室壁面附近分布较浓,后期进气则在气缸中心顶部分布较浓;时序进气能够获得显著的轴向分层分布;与均匀进气相比,缸内压力和温度偏低,燃烧滞后约0.7°CA,但放热率峰值偏高,NOx排放量降低51.2%,碳烟排放量降低13.4%。  相似文献